Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a vacuum cleaner

Hobot Vacuum Cleaner Repair in Almaty

A technician arrives within 60 minutes anywhere in the city, and diagnostics are free. 1-year warranty on labor and parts.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Filter replacementfrom1 500 ₸
  • Cord rewind mechanism repairfrom2 500 ₸
  • Motor brush replacementfrom2 500 ₸
  • Vacuum cleaner disassembly and cleaningfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Hobot vacuum cleaner faults in Almaty

The symptoms Hobot robot vacuum owners most often report, and their likely causes.

PricesPricesTECH SERVICE03

How much Hobot vacuum cleaner repair costs in Almaty

The table shows how much vacuum cleaner repair costs for Hobot in Almaty: a starting labor price without parts and the timeframe; the technician will agree the total with you in advance.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Hobot vacuum cleaner repair in Almaty

Howling and vibration, lost suction

1–3 business daystime

from 8 000 ₸cost

Problem
The Hobot vacuum cleaner began howling loudly and vibrating, suction dropped almost to zero — the motor bearings and impeller were broken.
What we did
The technician at the workshop disassembled the housing, installed a new motor in place of the worn one, reassembled the vacuum cleaner and checked suction in all modes.
Result
The howling and vibration are gone, suction is restored in all modes. 1-year warranty on the work and on parts.
I want the same
Artel vacuum cleaner: howling and vibration, lost suction — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Hobot vacuum cleaner repair works at your home in Almaty

Five steps from request to checking the work after repair.

  1. Requeston the day of request

    Describe the symptom and model — the technician will prepare tools and likely parts.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city, bringing testing equipment.

  3. Preparing partsbefore the visit

    The technician selects parts and tools for the specific Hobot model before the visit.

  4. Post-assembly checkafter repair

    Cleaning, sensors, and return to dock are tested on the customer's own model.

  5. Checkafter repair

    The vacuum is tested in operation: cleaning and return to dock are checked.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a vacuum cleaner at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Hobot vacuum cleaner repair in Almaty

Tell us the vacuum model and the symptom so the technician can bring the right parts and tools.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Hobot vacuum cleaner repair in Almaty

Ержан А.Order No. ZK-5205 · 17 April 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Больше всего напрягало: не включается. Tech-service оказался ближе всех, за это и выбрал. Крутит ровно, без рывков.

Repair: stick vacuum

Анна Т.Order No. ZK-3408 · 18 May 2024

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Повод для визита: не включается. Вернули в тот же день, всё функционирует.

Repair: stick vacuum

Аскар Ж.Order No. 35488 · 29 March 2024

ours

До этого обращался в другой сервис, там только развели руками. Проблема — не всасывает. Техсервис в Алматы, если что, вот их адрес — не пожалел. Сказать, что доволен — ничего не сказать.

Repair: stick vacuum

Андрей П.Order No. TS-4997 · 28 December 2023

ours

Хотел сначала вызвать мастера на дом, потом передумал. Запчасть была в наличии, доплачивать не пришлось. Уже полгода — ни одного сбоя.

Repair: stick vacuum

Сауле Н.Order No. ZK-2022/567 · 17 August 2022

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Вечером включил — и всё стало ясно: не включаеться. Позвонили заранее, предупредили, что задержится на полчаса. Вышло дешевле нового, что логично. Заодно поменяли: шланг. Не пожалел ни разу. Сделали и забыл про проблему

Repair: stick vacuum

Бакыт Ж.Order No. 2022-8882 · 15 August 2022

ours

Техниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Күтуге уақытым жоқ еді, сол күні алып кеттім. Бәрі жақсы, шағымаймын.

Repair: stick vacuum

Фарида К.Order No. ZK-2021/650 · 17 December 2021

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Привёз на диагностику: пылесос. Проблема — шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. По деньгам вышло адекватно, в другом месте просили больше. Мастер показал, что меняет: шланг. Мастер посмотрел, сказал, что возьмётся, и взялся. Если что — обращусь снова. Сделали и забыл про проблему.

Repair: stick vacuum

Гульмира С.Order No. TS-1707-240 · 20 May 2017

ours

Поломка застала перед командировкой, тянуть было нельзя. С чем пришёл: не всасывает. Шум пропал, работает мягко.

Repair: stick vacuum

Ляззат К.Order No. 133246 · 28 January 2017

ours

С чем пришёл: не включается. Рустем Т снял деталь, показал износ, вопросов не осталось. Вернули в тот же день, всё функционирует!!

Repair: stick vacuum

Ерасыл Б.Order No. ZK-2016/473 · 10 December 2016

ours

Долго откладывал ремонт, потом всё-таки собрался. Первое, что заметил: не всасывает. Проверил дома — всё на месте, ничего не забыли)

Repair: stick vacuum
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Hobot vacuum cleaner repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why can a Hobot robot vacuum break down, and what parts fail most often?

Hobot robots most often wear out the battery, lidar, wheel and brush drives, and the water supply system. The causes are dust, moisture, and natural wear, but the specific set depends on the model and cleaning conditions.

How long do Hobot robot vacuums typically last before their first major repair?

With regular cleaning of the brushes, filter, and sensors, a Hobot lasts several years, but the exact lifespan depends on the model and workload. The battery wears out fastest and is usually the first thing to be replaced.

Can the side brush on a Hobot S8 be repaired, or does it need to be replaced?

It depends on the cause: if the brush is clogged with hair or the drive belt has slipped off, cleaning or replacing the belt is enough. If the brush motor has burned out, the unit will need repair, which the technician will determine during diagnostics.

Why does a Hobot turn on but then turn off and beep after a minute?

Most often this is the battery no longer holding up under load, or the power board protection kicking in. Free diagnostics at the service center will pinpoint the exact cause.

Why doesn't the Hobot see the charging base even when it's right next to it?

Usually it's dirty contacts or a sensor on the base, less often the receiver on the robot itself. The technician will check both devices and tell you what needs fixing.

Can the battery in a Hobot robot vacuum be repaired, or is it replaced?

The Hobot battery is usually replaced rather than repaired, since it loses capacity over time. Replacement restores runtime, and the exact lifespan depends on the model and workload.

Repair guideArticleTECH SERVICE08

Hobot vacuum repair in Almaty by Tech Service technicians

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Hobot robot vacuums in Almaty as a direct provider: our technician comes to your home within 60 minutes or accepts the device at the service center. Diagnostics are free, the technician quotes the price after them, and there's a 1-year warranty on labor and parts. Technicians have 4 to 20 years of experience.

Who to trust with Hobot vacuum repair in Almaty

Hobot robots have a lidar, charging base, and self-cleaning station; not everyone takes them on, so it's important to know who's doing the work — a direct specialist or a middleman.

Why not all services handle Hobot

Hobot robots use laser navigation, a charging base, and a self-cleaning station, and their failures are specific — not like those of corded vacuums. The lidar builds a map of the room from beam reflections, so the slightest optics glitch or a sticking motor in the rotating assembly causes a navigation error, not a "bad cord." The power board in these machines is laid out for charging from the base and for the self-cleaning station, and it needs to be diagnosed by tracing circuits, not by randomly swapping the unit. A technician has to disassemble the lidar's rotating assembly, check the bumper end switches, and probe the board traces under a microscope — that takes skill and tooling that shops used to simple canister vacuums don't have. If a service describes "the cord won't retract into the drum," that's a template, not knowledge of the brand; ask whether they disassemble the lidar and power board. Hobot vacuum repair in Almaty requires exactly this approach to diagnostics.

Direct provider or middleman

At Tech Service, we're a direct provider: our specialist comes to you, not a marketplace courier, and the same person who ran diagnostics does the work. This keeps responsibility in one pair of hands: the field technician records the symptom, disassembles the robot, and fixes the cause without passing the unit down a chain. Our 1-year warranty on labor and parts covers the entire scope of work, and the service employee is personally accountable for the result. Diagnostics are free, a city visit takes 60 minutes, and we accept payment in any convenient way. A middleman hands the equipment to a third party, and later there's no one to claim the warranty from — with a direct provider, responsibility stays the same at every stage.

What gets fixed on Hobot and what to know before you call

  • Battery: capacity drops after hundreds of cycles, the robot stops reaching the base and cuts cleaning short in the middle of the room.
  • Lidar and sensors: dirty optics and a failing motor in the rotating assembly cause navigation errors and stop map building.
  • Side brush and suction motor: worn bristles, hair wound around the axle, and lost suction reduce dust pickup from hard floors.
  • Power board: disrupted charging circuits show up as the unit not taking a charge from the base or shutting down on its own.
  • Self-cleaning station: a clogged air duct and a pump failure prevent dust from being emptied from the robot's bin into the station's bag.
  • Before you call: give the model and symptom — the technician will bring the right tools, and the 60-minute visit won't be spent on clarifications on site.

Common failures and Hobot vacuum repair by on-screen error

A symptom on the Hobot screen is a hint, not a verdict: behind every error is a specific component. Let's break down what the technician checks for each symptom.

Not charging, not seeing the base, not building a map

If a Hobot isn't charging, the battery or the charging base contacts are usually to blame; if it doesn't see the base — the sensors or the station itself; if it doesn't build a map — the lidar or the wheel motor. The battery is responsible for runtime and a proper return to the base: when capacity drops, the robot reaches the station with an error or dies halfway. Sensors on the body and base contacts get clogged with dust and pet hair — then the unit circles the station but doesn't dock to charge. The lidar scans the room with a rotating module, and if its motor fails, the map isn't built at all and the robot moves chaotically. The wheel motor affects route following: worn gearbox parts make the device drift and lose landmarks. Before replacing the battery, the technician checks the power board — if it's faulty, the new battery will drain just as fast.

Symptom and component in the table

SymptomWhat we check firstCommon cause
Not chargingBattery, dock contactsBattery wear
Doesn't see the dockSensors, charging dockDirty sensors
Doesn't map the spaceLidar, wheel motorLidar failure
Side brush doesn't spinBrush driveClog or wear
No water supplyWater tank, supply pumpClogged channel
Turns off after a minutePower board, batteryBattery voltage drop

What to do if your Hobot falls or gets water inside

After a fall or water exposure, it's best not to turn the Hobot on until it's been diagnosed—trying to start it can finish off the power board. Inside the housing are the power board, controller, and sensor cables; impact can loosen connectors, crack solder joints, and moisture can short the traces. The controller manages the motors and navigation, so damage shows up right away: the unit doesn't respond to buttons or jerks erratically. After contact with liquid, sensors give false signals—the robot sees obstacles where there are none. Moisture under the housing causes contact corrosion within hours, so the sooner the device reaches a technician, the better the chance of avoiding a board replacement. Drying with a hair dryer on the battery doesn't help: heat deforms the plastic and speeds up oxidation on the contacts.

How a technician diagnoses and repairs Hobot

Hobot diagnostics start with checking components, not replacing parts. Here's how a specialist goes from symptom to component and decides what to fix and what to replace.

Battery or power board

We first test charging and dock operation, and only then decide whether to replace the battery or repair the power board—replacing the battery blindly makes no sense. Our specialist opens the housing, tests the charging dock contacts and the controller on the board, checks voltage under load, and observes how the robot behaves when moving toward the station. When the board holds a charge but the device still drains quickly, the issue is the battery's capacity. If voltage fluctuates at the contacts, the board itself needs attention—a new battery in such a circuit degrades within a month. In my view, this is the component people most often try to fix by guessing: they install a battery, but the cause remains. Fast discharge with a working board indicates battery wear, while voltage fluctuations at the contacts point to a controller problem.

Lidar, sensors, or wheels

We check navigation and mapping: when the Hobot gets stuck on a rug and loses its route, the cause can be either the lidar or the wheel drive. The specialist runs the robot on a test route, watches how the lidar rotates, compares obstacle sensor readings, and checks whether both wheels spin equally. A wheel motor with a worn brush causes slipping, and the device veers to the side—this is easily confused with a navigation failure. The drive is tested under load: on a smooth floor the unit moves straight, but on a rug it starts to wander. Lidar failures are more often due to dust on the glass than a breakdown, so we clean and calibrate first, and only offer replacement after testing—this way Hobot lidar repair doesn't turn into an unnecessary expense.

Repair or app and Wi-Fi setup

When Hobot won't connect to the app or Wi-Fi, it's not always a breakdown — we check whether the module needs replacing or a simple setup will do. The technician checks if the robot sees the 2.4 GHz network, whether it links to the Hobot app account, and if the data gets lost after a restart. Some cases are resolved by resetting the settings and re-pairing — the module stays functional. If the connection drops at the board level, we check the antenna and connector, and how the module behaves when the router reboots or the channel changes. The self-cleaning station is repaired separately from the robot, so if there's a problem with the station, bring it along with the robot: that way diagnostics take one visit and you won't need to call the technician twice.

Repair at home or at the service center and how to call a technician

Some Hobot breakdowns are fixed on-site, others require the service center. Here's when you need a technician visit and when it's better to bring the device to us.

When the technician comes to your home

We arrive within 60 minutes anywhere in the city: most breakdowns — brushes, battery, sensors, base — are fixed on the spot. Hobot vacuum repair in Almaty at home is convenient because you don't have to disassemble the station and haul the whole setup across town. The visiting technician brings tools and common parts, so replacing a side brush, checking the charging base contacts, or reinstalling the battery fits into one visit. Obstacle sensors and bumpers are easier to check in their usual environment: on-site you can see how the robot behaves near thresholds and furniture, where exactly it loses the base, and on which surface it goes off route. Call a technician to your home if the robot simply stopped working, but after a fall or water exposure, it's better to bring the device to the service center for a full disassembly — moisture and cracks in the body require taking it apart and checking the board, not just a quick look on-site. Such a visit saves the owner time: no need to disassemble the station and haul the whole setup across town.

What to bring to the service center along with the robot

If the work is done at the service center, bring the robot along with the charging base and self-cleaning station — that way the technician can check the whole setup, not just the vacuum. The charging base provides recharging and the robot's return after cleaning, and some complaints like "doesn't see the base" or "won't charge" are resolved on the pair of devices, not on one unit. The self-cleaning station adds its own logic: the bag, dust container, and dust intake channels affect how the device maintains itself after cleaning, and a clogged channel gives the same symptoms as a board failure. Without the base, you can't check charging and return to base, so the question "bring the base or leave it at home" is simple — bring it if you have one. Include the power supply and cord if they are detachable: their contacts are also checked.

How the call works and how long to wait

  • Describe the symptom: tell us exactly what happens — won't turn on, won't charge, won't map, shows a code on the screen.
  • 60-minute arrival: the technician comes to your home anywhere in the city, we agree on the visit time in advance based on your address.
  • Free diagnostics: the specialist checks the unit and names the cause of the breakdown before any work begins.
  • Approval of work: the cost is given after free diagnostics, you confirm the scope, and only then the repair starts.
  • 1-year warranty: the work performed and the parts are covered by a warranty, and Kaspi QR, Kaspi Red, card, cash or bank transfer are accepted.

Warranty and terms of service

The warranty is no less important than the repair itself. Here's what obligations we take on and how they relate to diagnostics and parts replacement.

What the 1-year warranty covers

We give a 1-year warranty on labor and parts — meaning we stand behind both the quality of service and the replaced component. A Hobot owner gets one term for everything: the technician's work, the installed battery, and the suction motor. If the robot acts up again after the repair, the claim follows the same procedure — no need to figure out which part failed. This is a matter of principle for us: a warranty on a part without a warranty on the work is meaningless, because failures most often happen at the junction — due to fit, contact, or firmware. In my view, this approach keeps both sides accountable. The warranty on a replaced battery or motor works the same as on labor, so it doesn't need to be stated separately.

How diagnostics relate to the warranty

Our free diagnostics are the first step toward the warranty: the technician identifies the cause of the breakdown and agrees on the work rather than replacing parts at random. First, they check the power, lidar, sensors, and wheels, then show which component failed and why. Agreeing before any work cuts out unnecessary replacements: if the battery holds a charge but the power board is the problem, the board gets replaced, not everything in sight. This sequence saves both the owner's time and the robot's resources. And the check costs nothing — it's part of the job, not a separate paid service. When the cause is known in advance, it's easier to confirm a warranty case later — for both you and the technician. In the end, both sides see the starting point from which responsibility for the component is counted.

Payment and transparency of work

We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician quotes the price after free diagnostics — before work begins, you know what you're paying for. No hidden items: the list includes only the work and parts needed to fix the specific issue. Payment can be made in any convenient way — cash, card, or transfer — and it doesn't affect the warranty. Transparency matters in another way too: the technician explains why this particular component was chosen and what to expect if the repair is postponed. Restoration is usually cheaper than buying a new robot if the failure is in one component — battery, brush, or sensor; replacing the device makes sense when several key components fail at once. So it's worth getting an accurate diagnosis first, and making the replacement decision with that information in hand.

What to remember about Hobot vacuum cleaner repair

Repairing a robot vacuum rarely comes down to a single replacement: it's more important to find the real cause of the failure and not replace parts at random. Below is a short summary to help a Hobot owner make the right decision.

  • Diagnostics first: Hobot service should start with a check, not with replacing parts — the symptom on the screen points to a component but doesn't replace an inspection.
  • Battery and board together: these two components are checked as a pair, otherwise a new battery won't solve the discharge problem.
  • Lidar needs cleaning more often: the optical sensor usually needs cleaning and calibration, not a module replacement.
  • Home or service center: for simple breakdowns, the technician comes to your home, but it's more convenient to bring the device with its base and station to the service center.
  • Warranty as a criterion: a year on labor and parts is the main guideline when choosing a provider, not promises over the phone.

60brands

Besides Hobot, we repair other vacuum cleaner brands in Almaty

Hobot is the main brand on this page. Below are the brands with dedicated repair pages on the site.

We also repairWe also repairTECH SERVICE09

Besides Hobot vacuum cleaner repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Hobot vacuum cleaner repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp