experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
The symptoms we see most often and their likely causes.
no power, tripped breaker, control board failure
from10 000 ₸
broken heating element, faulty thermocouple
from12 500 ₸
worn heating element, heat leak
from12 500 ₸
seized motor, broken belt
from5 500 ₸
faulty thermostat, clogged ventilation
from13 000 ₸
worn thermocouple, loose connection
from14 500 ₸
damaged wiring, moisture ingress
from10 000 ₸
worn bearings, loose mounting
from5 500 ₸
The price depends on the fault and the parts needed.
1 visittime
from 13,000 ₸cost

BeforeAfter5 steps

From your request to checking the oven after repair.
Describe the model and symptoms, and the technician will bring the right parts.
The technician comes to your address, anywhere in the city.
The technician will list the work and parts options for your model.
Agree on a convenient visit time and confirm your request.
We check the oven's performance after repair.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe your oven model and the problem, and the technician will clarify the details and suggest a visit time. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Гульнара Б.Order No. ZK-4165 · 12 October 2026
oursБыла срочная поломка, нужен был мастер сегодня. Могу рекомендовать. Запчасть нашли без проблем.
Павел Ш.Order No. ZK-2026/988 · 11 February 2026
oursВыбирал между несколькими сервисами, остановился на этом. Работали аккуратно, ничего не поцарапали. Диагностика заняла минут двадцать. Спасибо, выручили.
Анна Т.Order No. 31044 · 26 February 2022
oursСервис нашёл случайно, но остался доволен. Было подозрение, что дело в плате, хотелось услышать второе мнение. Проверили при мне, показали результат. Всё объяснили простыми словами. Сервис нормальный, обращусь ещё)
Богдан С.Order No. 374132 · 10 February 2022
oursДолго откладывал, но пришлось обратится. Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Приняли технику, выдали квитанцию. Мастер посмотрел, назвал причину, всё разложил по полочкам. Всё объяснили простыми словами. Если что — обращусь снова
Диана М.Order No. TS-3078 · 11 July 2020
oursБыла срочная поломка, нужен был мастер сегодня. Поломка застала перед командировкой, тянуть было нельзя. Диагностика заняла минут двадцать. Цену сказали сразу, без «ну потом посмотрим». Отношение нормальное, без высокомерия. По срокам не подвели. Починили и дали гарантию на месяц
Анна Т.Order No. 37349 · 27 June 2019
oursНужен был ремонт, искал вариант поближе. Цена имела значение, но и гарантия тоже. Однозначно да.
Сабина Г.Order No. ZK-2018/103 · 8 May 2018
oursИскал сервис с гарантией, чтобы не переделывать. Починили и дали гарантию на месяц
Айгерим Б.Order No. ZK-1673 · 24 January 2017
oursОбращался в сервис по совету знакомых. Запчасть нашли без проблем. Не пришлось ничего доказывать и просить. Отношение нормальное, без высокомерия. Не пожалел ни разу.
Елдос К.Order No. TS-1610-684 · 26 October 2016
oursОбращаюсь не первый раз, поэтому есть что сказать. Буду советовать знакомым
Мирас С.Order No. TS-9849 · 29 June 2016
oursИскал сервис с гарантией, чтобы не переделывать. Было важно, чтобы сделали до выходных — гости, то-сё. Работу сделали в тот же день. Дали гарантию и рекомендации на будущее. Цену сказали сразу, без «ну потом посмотрим». Всё объяснили простыми словами. Если что — обращусь снова.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMany issues can be fixed on-site during scheduled downtime or before opening, so the pizzeria stays open. Complex repairs involving part replacement depend on the model and may require removal — the technician will assess this during free diagnostics.
If the oven doesn't respond to buttons, shows erratic indicators, or fails to reach the set mode while the heating element is working, the panel is likely faulty. The technician will determine the exact cause during free diagnostics by checking the control circuit and heating elements separately.
Yes, the technician travels to homes or businesses and services gas pizza ovens: checks the burner, automation, thermostat, and draft. Work with gas equipment requires certification, so the technician follows regulations and may handle complex cases at the service center.
There could be several reasons: a burned-out heating element, a stuck thermostat, a faulty contactor, or a sensor. The technician will test the circuit and identify the exact cause after free diagnostics, then replace the failed component.
Most often, overheating protection is triggered: clogged ventilation, a faulty thermostat, or a temperature sensor. It depends on the model — the technician will check the heating circuit and automation during free diagnostics and determine the cause.
Yes, the baking stone can be replaced separately: cracks and chips prevent it from transferring heat evenly, causing uneven baking. The technician will select a stone for your model and check the fit and heating after installation.
Tech Service repairs pizza ovens in Almaty with its own technicians who have 4 to 20 years of experience. A technician arrives at your location within 60 minutes anywhere in the city, diagnostics are free, and we provide a 1-year warranty on labor and parts. We quote the price after diagnostics.
A pizza oven is not just a 'bigger oven.' It has a different chamber design and a different temperature range, so it should be serviced by a specialist, not a general appliance technician.
A pizza oven operates at a higher temperature and retains heat in the chamber thanks to a stone hearth, while a household oven is designed for lower heat and a different cycle. The stone hearth accumulates heat and transfers it to the dough from below—that's how a crust forms in just minutes, whereas in a regular oven the heat comes mainly from above and throughout the cavity. Hence the difference in components: the pizza oven has powerful heating elements, enhanced chamber insulation, separate temperature control, and a tightly fitting door. Due to the high temperature and constant heating-cooling cycles, the door seal and thermocouple wear out first, not the electronics—so a technician starts diagnostics with the thermal circuit, not the control board. In my opinion, owners check the thermal circuit last, even though it accounts for more than half of all failures.
A rotary oven is a convection machine with a rotating chamber for bread, while a pizza oven can be deck-type, conveyor, or chamber-type and works with flat dough placed on a stone. In a rotary model, bread dough moves on trays in a circle, and heat is distributed by air flows; in a deck oven, the dough lies motionless on a heated stone, and the result depends on the hearth temperature. Conveyor models are different—the belt with heating zones sets the passage time, not the stone temperature. Confusion in categories leads to calling the wrong technician: a specialist in rotary bakery models doesn't always know the logic of deck and conveyor ovens, so when requesting service it's important to specify the equipment type and model. This helps the technician select tools and parts for the specific unit in advance, and saves you from a repeat visit.
Based on the symptom, the technician narrows down the causes: 'doesn't heat' is about heating, 'doesn't hold temperature' is about sensors and the seal, 'error' is about control electronics. Let's look at the troubleshooting logic.
Most often the heating element is to blame, but if the element is intact and the oven doesn't reach temperature, the technician checks the thermostat and thermocouple. In a pizza oven, the top and bottom heating elements maintain the heat, while a thermocouple reads the temperature and sends a signal to the thermostat or electronic control board. When one heater burns out, the chamber heats unevenly: the bottom of the dough sets while the top stays pale. Over time, the sensor shifts or gets coated with carbon deposits—readings drop, and the oven either underheats or goes into protection mode. You can't tell one from the other without a meter: the technician uses a multimeter to test the heating element and reads the thermocouple output, then decides what to replace—we don't install parts at random. In my view, testing saves the customer from replacing a working component unnecessarily.
Clicks usually come from the thermostat or relay, spontaneous shutdown is overheating protection, and an error code points to a specific component that the electronic board flagged as faulty. The relay opens the heating circuit each time it turns on, and over time the contacts burn—hence the rhythmic clicking and temperature swings. Overheat shutdown is more often caused by a stuck fan or a clogged heat exhaust channel: the sensor sees a rise and cuts heating early. A code on the display isn't a death sentence for parts: it only tells you where the board detected a deviation, so the decoding is always checked against the oven model, not "treated" by a single symbol. The same code means different components across manufacturers, so note the code and the appliance model before contacting a technician.
| Symptom | What we check first | What it could be |
|---|---|---|
| No heat at all | Heating element and wiring | broken heater, terminals |
| Weak heating | Thermocouple and seal | heat leak, sensor |
| Doesn't hold temperature | Thermostat and thermocouple | sensor wear, relay |
| Error on display | Board and sensors | electronics fault, readings |
| Panel unresponsive | Control panel | ribbon cable, buttons, board |
The format of work depends on the breakdown: some faults are fixed on site, others require service disassembly. Here's how it works with us and what stages the check involves.
Diagnostics are free: the technician checks heating, sensors, controller, and door mechanics to name the exact cause and scope of work. First, he measures how the oven reaches operating mode and holds temperature, then tests the heating element and compares thermocouple readings with actual chamber heat. The controller is tested separately: relay operation and no faults in the switching logic. Door mechanics—hinges, pressure, seal integrity—are also part of the check, because heat leaks often masquerade as weak heating. The inspection is needed not only to find the fault but also so the customer understands what they're paying for. The technician gives the price after the check, not over the phone by guesswork, so the conversation starts with facts, not assumptions. In my view, this pause between inspection and verdict saves nerves on both sides.
| Job | Where we do it | What we check afterward |
|---|---|---|
| Heating element replacement | at your home | reaches operating temperature |
| Thermostat replacement | at your home | temperature stability |
| Thermocouple replacement | at your home | sensor readings |
| Seal installation | at your home | heat retention |
| Controller repair | at our service center | all oven modes |
We arrive within 60 minutes anywhere in the city: the technician runs diagnostics, agrees the scope of work and the price with you, and only then starts the job. You can book by phone or through the form on the website — just describe the symptom: not heating, switching off, clicking, showing an error code. Based on your description, we match you with a specialist who has the right profile and let you know what they will check on site. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. Agreeing everything before work starts protects you: you know in advance which parts are being replaced and why, and you can decline the service if it doesn't make sense. This approach avoids disputes about how the final bill was calculated. We agree the visit time when you book so the technician arrives in a window that suits you.
Gas models and ovens in food service are separate cases: the former have their own burner logic, while for the latter kitchen downtime is critical. We'll cover both.
Yes, we service gas pizza ovens: we check the burner, ignition and sensors, and we carry out gas-related work in compliance with safety requirements. The burner provides the heat, and its failure shows up in different ways — the flame goes out, the temperature is uneven, or the unit doesn't start at all. Diagnostics begin with checking the fuel supply, the condition of the nozzles and the ignition electrode, and the sensor shows whether the set mode holds after adjustment. Our technicians have 4 to 20 years of experience with gas equipment and determine on site whether a part needs replacing or adjustment is enough. Don't try to "tweak" a gas appliance yourself: incorrect burner adjustment means not only lost heat but also a risk of leakage, so this work is best left to a technician.
We service pizzerias and restaurants by arrangement: the technician arrives in a convenient window so work doesn't stop the establishment longer than necessary. A city visit takes 60 minutes, and diagnostics are free — this lets us quickly understand what's wrong with the equipment while the kitchen keeps taking orders. Downtime for a pizzeria during work is measured in lost orders, so the technician first assesses whether the unit can be restored on site and only then suggests a service center option. The warranty on labor and parts is 1 year, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. What matters to a business isn't the process itself but the hours without baking: our job is to get the unit back up and running with minimal pause. That's why before the visit we confirm the model and the nature of the symptom so the technician brings the right tools and common parts for that specific unit.
Before the specialist's visit, it's important not to make the breakdown worse, and sometimes it's worth honestly assessing whether restoration is justified at all. Let's go through both questions in order.
Restoration isn't worth it when the cost of work is comparable to the price of a new oven or when several key components are worn out at once. Most often this is seen in units with a cracked stone hearth, a burned-out dome, and a simultaneously malfunctioning controller: replacing one component pulls the others along, and the total scope of work grows. Our diagnostics are free, so the decision isn't made blindly. We say this directly after the check: if servicing isn't advisable, the technician will say so before starting work, not after the fact. In my view, an honest assessment of the economics is more important than any part replacement—sometimes it's cheaper to invest in a new unit than to keep an old one running. The technician quotes the price based on the results of the free diagnostics, when the full list of faults is clear.
It's enough to clear access to the equipment, remove dishes from the work area, and be ready to answer the technician's questions about how the oven behaved before the breakdown. The specialist's visit takes up to 60 minutes anywhere in the city, so it's worth starting preparations right after the call. Remove boxes and supplies from the approach to the unit, clear space near the back wall if a cable or gas line runs there. The more precisely you describe the conditions when the symptom appeared—during warm-up, when changing modes, during a voltage spike—the faster the technician can narrow down the causes and avoid checking everything. On-site diagnostics take less time when the client remembers the sequence of events. And it's not a formality: a couple of precise details in the description can save an entire stage of testing.
Warranty, pricing logic, and who exactly will come on the call—these are the three questions people usually use to choose a service. We answer them directly, without generalities.
We provide a 1-year warranty on labor and a 1-year warranty on parts: if the problem comes back after service, we fix it under warranty. The 12-month period covers both the work and the installed component — from the heating element and thermostat to the stone hearth's heating element. During this time, the part goes through dozens of heating cycles, and any hidden installation defect or manufacturing flaw will show up. In my view, a parts warranty separate from labor is not just a formality: a part can fail before an installation error makes itself known, and then the customer isn't left alone with the problem. That's why our warranty period for the component and for the work is the same — it's easier to determine who's responsible for the result, and you don't have to prove whose defect it is.
The technician quotes the price after free diagnostics: it depends on which component failed and what work is needed, not on an "average city price." During the free visit, the technician checks the heating, temperature sensor, wiring, and mechanics, and identifies the cause and scope of work. Approval comes after diagnostics: you see exactly what is being replaced and why, and only then does the work begin. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. This approach protects the customer from surprises: first the cause and scope of work, then approval, and only then the work itself — no "extra charges on the spot." If the cause turns out to be something minor like a misadjusted setting or a loose contact, you'll know before work starts and won't pay for unnecessary disassembly.
We service equipment from various brands and work as a direct provider: our own technician comes to you, not a middleman from an aggregator. Our technicians have 4 to 20 years of experience and service both compact home models and professional equipment for pizzerias. A direct provider is fully responsible for the result — both the work and the parts — so the warranty isn't diluted between contractors, as happens when a request is passed to a third party. Moreover, you can call a technician anywhere in the city: arrival within 60 minutes, service at your home or in our workshop. In my view, for a pizzeria owner this is a decisive argument: one party responsible for the result, not a chain of messages. Pizza oven repair in Almaty is an area where this kind of direct responsibility matters.
Restoring the appliance comes down to a clear sequence: identify the equipment type, narrow down the cause by symptom, choose the service format, and lock in the warranty terms.
6brands
We source parts by oven model. See the list of brands below.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
The easiest way to remove scale from a kettle is with citric acid: 1–2 tablespoons per liter of water, boil for 5–10 minutes, then drain and rinse.
17 March 2026 · 13 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
Air conditioner errors are codes on the display or flashing indicators that show which component has failed.
5 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read












