Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a headphones

Headphones Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival in 60 minutes anywhere in the city
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Vasiliy Z.Maulet T.Madi T.Ivan K.

Repair prices

  • Diagnostics0 ₸
  • Cable repair or replacementfrom2 500 ₸
  • Bluetooth module repairfrom2 500 ₸
  • Plug replacementfrom3 000 ₸
  • Speaker replacementfrom3 500 ₸
All prices
2ГИСЯours4,96 064 reviews
2GIS · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common headphone faults in Almaty

The symptoms people come with most often and their likely causes. The technician names the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much headphone repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Cable repair or replacementparts not included

1–3 hours

from2 500 ₸

Bluetooth module repairparts not included

1–2 days

from2 500 ₸

Plug replacementparts not included

1–3 hours

from3 000 ₸

Speaker replacementparts not included

1–2 hours

from3 500 ₸

Mesh cleaningexact price — after the free diagnostics

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after headphone repair in Almaty

Sound lost in left earcup

1–2 hourstime

from 3 500 ₸cost

Problem
Sound was lost in the left earcup of wireless on-ear headphones, the right one played normally — the speaker coil broke.
What we did
The technician opened the headphone housing, installed a new speaker and checked the sound.
Result
Sound in the left earcup was restored, the technician checked the operation of both earcups.
I want the same
Headphones: sound lost in left earcup — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How headphone repair works at your home in Almaty

Five steps from your request to checking the result together with the technician.

  1. Requeston the day of request

    Describe the symptom and the headphone model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city, and the work starts on site.

  3. Approvalbefore the repair

    You approve the scope of work and the part option, and only then does the technician start.

  4. Handoverafter reassembly

    Check the sound in each channel and the charge indicator. Distortion or silence on one side is a reason for another inspection.

  5. Check and warrantyafter the repair

    You check the sound and charging together with the technician. 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our digital electronics repair technicians in Almaty

The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

  • 7 technicians in Almaty
  • 7–18 years of experience in the department
  • Article author Vasiliy Z., 10 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 7 specializations — they are listed on the technicians' cards.

01 / 07
Vasiliy Z., senior TV repair technicianexperience10 years

Vasiliy Z.

Senior TV repair technician

Maulet T., TV board repair technicianexperience10 years

Maulet T.

TV board repair technician

Madi T., electromechanical technicianexperience10 years

Madi T.

Electromechanical technician

Ivan K., audio and DVD repair technicianexperience13 years

Ivan K.

Audio and DVD repair technician

Nikolay K., smartphone repair technicianexperience18 years

Nikolay K.

Smartphone repair technician

Aleksandr L., screen and battery replacement technicianexperience8 years

Aleksandr L.

Screen and battery replacement technician

Bakdaulet E., game console repair technicianexperience7 years

Bakdaulet E.

Game console repair technician

We reply during working hours

Book headphone repair in Almaty

Choose a convenient visit time and get your headphones ready for inspection: don't take them apart or dry them with a hair dryer. The technician will check the device on site.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of headphone repair in Almaty

Тимур А.Order No. 15811 · 6 September 2026

ours

С чем пришёл: не заряжаються. Сергей Архипов взялся за то, от чего другие отказались. Сказать, что доволен — ничего не сказать.

Repair: headphones

Дмитрий Л.Order No. TS-2502-145 · 20 August 2025

ours

Телефонмен кеңес сұрадым, тегін айтты. Кепілдік берді, бұл мен үшін маңызды. Бағасы базардағыдан қымбат емес. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Жөндеуге кепілдік бар, сол сенімді

Repair: headphones

Ильяс Н.Order No. 2025-2993 · 24 July 2025

ours

Үйдегілер «лақтыр» деді, мен шешім қабылдамай тұрып көрсетуге апардым. Ұзақ уақыт бойы жөндеуге беретін жер іздедім. Кәсіби мамандар, рақмет)

Repair: headphones

Алексей Г.Order No. TS-9077 · 13 May 2025

ours

Цена имела значение, но и горонтия тоже. Больше всего напрягало: не заряжаються. Сделали и забыл про проблему.

Repair: headphones

Гаухар Н.Order No. TS-1664 · 30 January 2024

ours

Цена имела значение, но и гарантия тоже. Сначала думал, что ерунда, но появилось: порван кабель. В списке работ — динамик. Все разъёмы на месте, ничего не люфтит.

Repair: headphones

Жанар Т.Order No. TS-2307-553 · 25 March 2023

ours

Досымның кеңесімен келдім, өкінбедім. Ұсынамын, текке ақша алмайды!!. Включил, проверил, работает.

Repair: headphones

Малик Т.Order No. ZK-4204 · 19 January 2023

ours

Бұрын басқа сервиске барғанмын, бірақ бұл жолы осында келдім. Кепілдік мерзімі біткен соң бұзылды, әрине.

Repair: headphones

Станислав К.Order No. 34549 · 3 September 2022

ours

Позвонил в три места, здесь единственные назвали цену сразу. Вернули в тот же день, всё функционирует.

Repair: headphones

Ольга М.Order No. 2021-4661 · 30 November 2021

ours

Пробовал найти мастера в своём районе, но все были заняты. Основная жалоба — не работает одно ухо. Функции все на месте, ничего не отвалилось.

Repair: headphones

Аяна Е.Order No. 10699 · 15 August 2021

ours

С чем пришёл: порван кабель. Дамир М помог выбрать, без навязывания. Сделали аккуратно, следов разборки не видно.

Repair: headphones
Questions and answersQuestionsTECH SERVICE07

Questions about headphone repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can earbuds be fixed if the sound is gone in one earbud?

Yes, in most cases it can be fixed: the cause is often the driver, soldering, or the connector contact, and a technician identifies it during free diagnostics. It's not always repairable, but most single-channel issues can be restored.

Why won't one wireless earbud charge in the case?

Usually it's dirty contacts, the earbud shifting in the slot, or battery wear, and less often a case board failure. It depends on the model: a technician will check the contacts and battery and tell you what needs replacing.

Can the ear pads and headband be replaced on over-ear headphones?

Yes, on many models the ear pads and headband are replaceable separately, as are the hinges on on-ear headphones. It depends on the model: some housings have non-removable parts, and in that case compatible alternatives are selected.

Can a 3.5 mm plug be resoldered if the wire is frayed at the connector?

Yes, the plug is resoldered or replaced along with a section of cable if the strands are intact further along the wire. If the fraying is severe, the cable is replaced entirely so the break doesn't happen again.

The headphones crackle at high volume—is it the driver or the wire?

The crackling usually comes from a damaged driver or a loose diaphragm, but it can also be from a frayed wire at the plug. A technician will name the exact cause after free diagnostics; it depends on the model.

Do you repair headphones at home or only at the workshop?

A Tech Service technician comes to your home anywhere in Almaty within 60 minutes, and performs some work at the service center. They will tell you what can be done on-site after free diagnostics.

Repair guideArticleTECH SERVICE08

Headphones Repair in Almaty with Free Diagnostics from Tech Service

Vasiliy Z., senior TV repair technician

Author: Vasiliy Z.,Senior TV repair technician

Published
Updated

Headphones repair in Almaty at Tech Service starts with free diagnostics: the technician finds the cause and names the cost before any work begins. We restore TWS earbuds, charging cases, over-ear and wired models, arrive within 60 minutes anywhere in the city and give a 1-year warranty on labor and parts. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

How to tell what broke from the symptom

How your headphones behave often hints at which part has failed. Here you will find typical symptoms, a breakdown of a silent channel and safe checks worth doing before the technician arrives.

Symptoms and likely causes

SymptomLikely causeWhat the technician checks
Silence in one channelClogged mesh, broken wire, drained batteryMesh, wire, earbud charge
Sound cuts out when the wire movesWire break at the plug, at the cupCable integrity along its length
Distortion and rattle at high volumeDamaged diaphragm, speaker coilSpeaker at different volume levels
Earbud won't chargeDirty, oxidized contactsCase and earbud contacts
Battery drains fastWorn batteryRuntime from a full charge
Bluetooth dropouts and desyncPairing or radio module faultPairing with another source
The other person can't hear wellClogged mesh, broken microphoneMicrophone and its opening

Why one channel went silent

Silence in one channel usually comes down to three causes — a clogged protective mesh, a broken wire strand or a drained earbud, so at free diagnostics we check these parts first. On a wireless pair, earwax on the sound outlet mesh muffles the sound gradually: the owner notices that one earbud has become quieter only after weeks. On a wired model, the channel cuts out suddenly, after the cable is yanked or the headphones are dropped. Our technicians have 4 to 20 years of experience, and by the nature of the silence they quickly tell a mechanical break from an electronic fault. Headphones repair in Almaty at Tech Service starts with exactly this check, and we name the cost only after it. If the sound comes back when you wiggle the wire near the plug, a strand is broken, and it is best to solder it right away — frayed conductors can eventually short against each other.

What to check yourself before calling a technician

  • Another source: connect the headphones to a second smartphone or laptop to rule out a sound settings glitch on your main device.
  • Balance and modes: check the left and right channel volume balance in your phone settings, as well as mono mode and the equalizer.
  • Re-pairing: remove the pair from the Bluetooth device list and connect it again, and on TWS models do a reset first.
  • Sound outlet mesh: look at the opening against the light and gently remove earwax with a dry cotton swab, without needles, alcohol or water.
  • No opening: don't take apart a glued housing yourself — broken clips and a torn ribbon cable make it harder to fix the headphones in the workshop later.

Wireless earbuds and the charging case

TWS earbuds have three weak spots: the charging case contacts, the tiny batteries and the link between the earbuds. Each fails in its own way and needs its own check, so we look at them separately.

An earbud won't charge in the case

An earbud usually won't charge in the case because of dirty, oxidized contacts, so we check them first, before opening the housing. The case has spring-loaded pins that press against pads on the earbud body; earwax, dust and sweat form a film on them, and current stops flowing. Sometimes a pin gets stuck down and doesn't spring back — then one earbud runs flat while the other charges normally. Less often the cause is the case board or the battery itself, and the indicator gives a hint: does it light up when the earbud is placed in its slot. The technician cleans the pads, checks pin travel and measures whether voltage reaches the contacts. Wipe the contacts with a dry lint-free cloth every few weeks — water and wet wipes only speed up oxidation.

Replacing the battery in an earbud and the case

The battery in an earbud or the case can be replaced if the housing can be opened without damage, and we determine this at free diagnostics. Lithium-ion cells lose capacity over time: a pair that used to last a long trip starts running flat in an hour or two, and the case no longer fully charges the earbuds. Many TWS models have glued housings, so opening them takes heat and careful work to avoid damaging the antenna and the speaker ribbon cable. If the housing is designed to be non-serviceable, headphones repair makes no sense, and the technician will say so right away, before any work begins. The new cell is matched in size and capacity to the specific earbud, otherwise it won't fit or won't last long. If only one earbud drains quickly, there is no need to replace the battery in the other — replacing the cell in the one that runs flat is enough.

Pair desync and connection dropouts

Pair desync, when only one earbud plays or the two can't see each other, is usually fixed by a reset and re-pairing rather than soldering. The reset procedure depends on the model: on some you hold the button on the case with the lid open, on others you press and hold the touch sensors on both earbuds, so it is best to take the exact sequence from the manufacturer's manual. Before the reset, remove the headphones from the Bluetooth device list on every smartphone and laptop they were connected to, otherwise the pair will reconnect with the old settings. If the connection doesn't come back after the reset, the likely cause is a faulty radio module, a drained battery in one earbud or an antenna damaged in a fall. Dropouts that happen only when the phone is in your trouser pocket are usually not a fault: the body partly blocks the 2.4 GHz signal.

Over-ear, on-ear and wired models

On models with a headband and a cable, the mechanics and the cable fail first, while the electronics suffer less often. Here are the main parts and the work done on them.

Parts and the work we do on them

PartTypical faultWhat we do
CableBreak at the plug, at the cupSoldering and new strain relief
3.5 mm plugLoose, crackles when turnedPlug replacement
Detachable cableBreak inside the wireCable replacement without soldering
HeadbandCrack, frayed wireRepair and wire replacement
HingeCracked, ear cup wobblesHinge replacement
Ear padsFaux leather peelingReplacement with the same thickness
Headset microphoneWeak sound, noiseMesh cleaning, capsule replacement

Cable breaks and plug replacement

A cable usually breaks in two places — at the plug and where it enters the ear cup, and we restore it by soldering with new heat-shrink tubing and strain relief. These are the spots where the wire bends constantly, and the protective sleeve eventually cracks and stops holding the bend. The strands in such a cable are thin and enamel-coated, so before soldering the technician removes the insulating layer, otherwise there will be no contact. When the jack is loose or the pads inside it have oxidized, it is easier to replace the whole plug: the new one gets the same pinout, taking into account whether the headset has a microphone and a control button. The detachable cable of over-ear models is usually replaced without soldering, all it takes is a compatible connector. Don't wrap the wire tightly around your phone or fingers — that is the fastest way to get a break at the plug.

Headband, hinges and ear pads

A cracked hinge, a delaminated headband and worn ear pads are replaced separately, and we check the wire inside the headband at the same time, because a crack often frays it. On folding on-ear models the load falls on the hinge: the plastic fatigues, the ear cup starts to wobble, and over time the wire running from one cup to the other wears through. Faux leather ear pads peel from sweat and creams, while the padding under fabric ones gradually flattens. For over-ear models, headphones repair in Almaty mostly comes down to this kind of mechanics rather than electronics, so the decision is made after inspection. When replacing ear pads, choose the same thickness and material: the bass depends on how tightly they seal against your head, and a pad that is too thin noticeably thins out the low end.

Free diagnostics and what makes up the estimate

The final amount can't be named precisely in advance: it depends on the cause of the fault and the design of the model. We explain what affects it, how the check works and when the work isn't worth it.

What the final amount depends on

We name the cost after free diagnostics, because it depends on three things — the faulty part, the housing design and the part needed. Asking how much headphones repair costs gets no exact answer without an inspection: the same silence in one channel can turn out to be a clogged mesh or a broken ribbon cable under a glued housing. Soldering the cable on a wired model and replacing the battery in an earbud take a different amount of work and different parts. The brand matters too: parts for some models are widely available, while for others they have to be sourced separately. The technician first finds the cause, then names the amount, and work begins only with your consent. Ask whether the part is included in the quoted amount, so the final bill holds no surprises.

How diagnostics works

  • Free and before any work: diagnostics at Tech Service is free and is done before any work, even if you later decide not to restore the headphones.
  • Housing inspection: the technician looks for cracks, traces of moisture and oxidation, and checks the mesh, plug, hinges and charging contacts.
  • Channel check: the sound is tested at different volumes in both channels to tell a clog, a broken strand and a damaged speaker apart.
  • Charge and connection: on wireless models the technician checks whether the earbuds and case charge, whether pairing holds and whether the microphone works.
  • Your account: tell us what came before the fault — a drop, water or a sharp tug on the wire immediately narrows down the checks.

When a repair isn't worth it

A repair stops making sense when the board and both earbuds are damaged at once, the housing is designed to be non-serviceable, or after water exposure corrosion has spread across the ribbon cables and contacts. Owners of budget TWS models often ask how much headphones repair costs compared with a new pair, and the honest answer depends on the diagnosis: replacing a plug or ear pads pays off for almost any model, while complex board-level work makes sense mainly for expensive ones. On over-ear models the mechanics can almost always be restored, because the hinge, headband and ear pads are separate parts. The owner makes the final decision after diagnostics, once the cause and the amount are known. If one earbud is lost or broken while the other and the case work fine, it is better to replace only the missing piece — many manufacturers sell earbuds and cases separately.

Technician at home or work at the service center

Some work the technician does right on site, while other jobs need the workshop. We explain how a visit works, which jobs are done where and how to prepare for it.

A technician arrives within 60 minutes

A technician arrives within 60 minutes anywhere in the city and carries out free diagnostics right at your home or office. For many people, headphones repair nearby is more convenient than a trip across the city: there is no need to look for a workshop, and you learn the cause of the fault in person. On site the technician can clean the mesh and contacts, replace ear pads or a detachable cable, and reset and re-pair the earbuds. If soldering inside a glued housing or a battery replacement is needed, the headphones go to the service center, and you know in advance what work is planned. We are a direct provider, so our own technician comes to you, not a middleman, and you can pay via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies. Before the visit, find the case and the original charging cable — without them the technician can't check how the earbuds charge.

Where each job is done

JobWhere it's doneWhy
Cleaning mesh and contactsOn siteNo need to open the housing
Resetting and pairing the earbudsOn siteOnly the owner's phone is needed
Ear pad replacementOn siteThey attach with clips
Detachable cable replacementOn siteReplaced without soldering
Soldering the cable and plugAt the service centerCareful work with thin strands
Earbud battery replacementAt the service centerOpening a glued housing with heat
Recovery after waterAt the service centerDisassembly and board cleaning

How to prepare your headphones for the visit

  • Case charge: if the case still holds a charge, charge it in advance so the technician can check the earbuds and indicators right away.
  • Cable and adapters: have the original charging cable ready and, for wired models, the adapter the headphones are usually used with.
  • Sound source: keep the smartphone or laptop where the problem occurred at hand — pairing will be checked with exactly that device.
  • Fault description: write down in which apps and during which actions the sound drops out — this shortens the search for the cause.
  • Manufacturer app: if the headphones are controlled through the manufacturer's app, update it and check that it sees both earbuds.

Warranty and care after the repair

After the headphones are restored, two things matter — the warranty on the work done and proper use. We cover the warranty, what to do after water exposure and simple care habits.

1-year warranty on labor and parts

The 1-year warranty on labor and parts applies to every repair carried out by Tech Service technicians. We are a direct provider: the work is done by our own specialist, not a third-party workshop the order was passed to, so the person who did the job is responsible for the result. When choosing a headphones repair service, pay attention to exactly this — with a middleman, responsibility is blurred between them and the contractor. Our technicians have worked with electronics for 4 to 20 years and know the weak spots of popular models: case contacts, hinges on folding designs, cable breaks at the plug. Diagnostics is free, and we name the cost before work begins, so you know in advance what you are paying for. Ask the technician to show you the replaced part — an oxidized contact or a swollen battery makes it easier to see which conditions to avoid from now on.

If your headphones get wet

If your headphones get wet, turn them off right away, take the earbuds out of the case and don't put them on charge: current through a damp board starts corrosion and can cause a short circuit. Shake the water out of the sound outlets, wipe the housing and leave the parts to dry at room temperature with the case lid open. A hair dryer and a radiator are dangerous — hot air warps the plastic and adhesive of the housing, and rice barely draws moisture out of closed cavities. An IPX4 rating means protection from splashes and sweat, not from immersion, so swimming in a pool or going through the wash in a pocket remains a risk even for sports models. Even if the sound returns after drying, contact oxidation can show up later, so after serious water exposure it is wise to bring the headphones in for diagnostics.

Habits that extend service life

  • Store in the case: keep the earbuds in their case and over-ear models in a pouch to protect the mesh, hinges and cable from dust.
  • Clean mesh: every few weeks inspect the sound outlets and remove earwax with a dry cloth without pushing it further inside.
  • Gentle cable handling: pull the plug out of the jack by its body, not by the wire, and coil the cable in loose loops without kinks.
  • Moderate temperature: don't leave the headphones in a car in the sun or in the frost — lithium-ion batteries lose capacity faster this way.
  • Ear pad care: wipe faux leather with a slightly damp cloth without alcohol so the coating stays soft longer and doesn't crack.

Headphones repair what you should know

Here is the key information for anyone with broken headphones: how to understand the cause of the fault, what to check yourself and what to look for when choosing a technician.

  • The symptom points to the part: silence in a channel, distortion, charging problems and dropouts point to different parts and different jobs.
  • Simple checks first: another sound source, channel balance, resetting the pair and cleaning the mesh often solve the problem without opening the housing.
  • The amount comes after diagnostics: the exact cost can be named only after the check, once the cause, the housing design and the part needed are known.
  • Water calls for a pause: wet headphones must not be switched on or charged, and they are best dried at room temperature, without a hair dryer or radiator.
  • Provider and warranty: choose a technician who does the work themselves and backs both the work and the installed parts with a warranty.

65brands

Which headphone brands we repair in Almaty

Choose a brand on the page to see the design features and typical weak points of your model.

We also repairWe also repairTECH SERVICE09

Besides headphone repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before headphone repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISЯYandex Maps
Send a review with photos on WhatsApp