Original
Manufacturer's pump
- Compatibility
- Fits your model exactly
- Selection
- By part number or machine model
- Price
- Higher than an equivalent
- Warranty
- 1 year on labor and parts
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician will arrive within 60 minutes anywhere in the city, run free diagnostics, and replace the pump with a 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
freediagnostics
The technician checks the pump, filter, and connections, finds the cause of the failure, and replaces the pump. Diagnostics are free, and the cost of work and parts is agreed before replacement. The technician arrives within 60 minutes anywhere in the city, with a 1-year warranty on labor and parts.
01
Step 1on-site
The technician inspects the pump, hoses, and clamps, looking for leaks and loose connections.
02
Step 2on-site
Assesses the condition of the filter and the water quality in the tank to understand why the pump failed.
03
Step 3on-site
Explains what has failed and agrees with you on the scope of work and the part.
04
Step 4on-site
Installs a new pump, checks that connections are sealed, and verifies water intake from the tank.
05
Step 5on-site
Tests water intake and pressure, and checks that there are no leaks around the pump.
5
Five typical symptoms point to the pump: the machine isn't drawing water, the pump is noisy, pressure is weak, an error appears on the display, or the coffee is cold or the serving is smaller.
Not drawing water after a long break
After a long break, an air lock can form in the tank, and the pump can't draw water.
Pump is noisy or vibrating
Humming and vibration during water intake indicate pump wear or debris inside.
Weak pressure
The stream has become thinner and coffee takes longer to brew — the pump isn't building enough pressure.
Error on the display
Error codes for the water unit vary by brand: De'Longhi uses E05, Philips uses E24, and Jura uses 8.
Cold coffee or underfilling
Pressure drop due to pump wear leads to underfilling and insufficient heating of the drink.
Don't run the machine if it's leaking: unplug it and call a technician for diagnostics.
Describe the symptomsThe pump is selected by the part number on the housing and connector compatibility.
Original
or
Equivalent
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–3 daystime
from 8 500 ₸cost

BeforeAfterThe home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the problem in your request — the technician will agree on a visit time and give you an approximate repair cost before arriving.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Нурасыл М.Order No. ZK-2026/706 · 26 March 2026
oursРадик Т взялся за то, от чего другие отказались. Вышло 4 500 тенге, дешевле, чем я рассчитывал. Сделали аккуратно, следов разборки не видно.
Асель Ж.Order No. 2024-1182 · 28 October 2024
oursЖалоба простая: не набирает воду. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. С тех пор ни разу не подвёл.
Марат Ж.Order No. 336038 · 18 December 2023
oursЖұмыстан кейін үлгеру үшін жақын жердегі шеберхана іздедім. Бірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Бағасы мен сапасы сай)
Игорь Щ.Order No. 2023-1636 · 2 July 2023
oursСмотрел, у кого есть запчасти на такую модель. С чем пришёл: не набирает воду. Дамир М объяснил причину так, что понял даже я. Второй месяц — полёт нормальный)
Станислав К.Order No. ZK-2022/762 · 27 January 2022
oursСмотрел, у кого есть запчасти на такую модель. Первое, что заметил: ошибка. Вернули в тот же день, всё функционирует!!
Акбота Т.Order No. 965917 · 25 February 2020
oursБірінші кезекте бағасын білгім келді, содан кейін әкелдім. Алдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды. Жұмыс сапасы жақсы, артық шуы жоқ. Бағасын бірден айтпады, қайта сұрауға тура келді)
Аида Т.Order No. ZK-9775 · 7 September 2019
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Жалоба простая: течёт. Уже полгода — ни одного сбоя.
Елдос К.Order No. 2019-3860 · 28 May 2019
oursТехника кенеттен істен шықты, қатты асығыс едім. Жұмыс барысын көрсетіп отырды, жасырған жоқ. Бағасы мен сапасы сай
Санжар О.Order No. TS-5419 · 2 December 2018
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Больше всего напрягало: ошибка. Ребёнок уже проверил на прочность, держиться.
Роман З.Order No. TS-1605-709 · 28 May 2016
oursДо этого обращался в другой сервис, там только развели руками. Жалоба простая: течёт. Второй месяц — полёт нормальный.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionCheck if there is water in the tank and if the water supply valve is open. If the tank is full but no water comes out, the pump is likely faulty or the hydraulic system is clogged — a technician's diagnostics is needed.
The causes could be a clog, scale, or a broken pump. If water doesn't appear after cleaning, the pump is probably worn out and needs replacement.
First, flush the system without coffee, then use a descaling agent. If the pressure hasn't recovered, the cause may be the pump — a technician will check it during diagnostics.
The pump in a coffee machine is replaced, not repaired: the housing is non-separable, and worn valves and the diaphragm cannot be restored. A new pump with installation is more reliable than trying to fix the old one.
Technically it's possible, but without experience it's easy to damage the hydraulics and electronics, and incorrect assembly leads to leaks. A technician will replace the coffee machine pump at your home and immediately check the pressure and tightness.
Weak pressure will gradually turn into complete failure, and running on a worn pump puts stress on the boiler and valves. In the end, replacing the coffee machine pump will cost less than repairing neighboring components after a breakdown.
Tech Service replaces coffee machine pumps in Almaty at your home or in our service center: a technician arrives within 60 minutes anywhere in the city, diagnostics are free, and you get a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, once the cause is clear. Our own technicians with 4 to 20 years of experience handle the work, no middlemen.
The pump supplies water under pressure to the brewing unit. As it wears out, the machine's behavior changes—but similar symptoms can come from scale buildup, so it's important to tell one from the other before taking the water system apart.
Clogs and scale reduce flow gradually and often trigger an error on the display, while a worn pump loses pressure suddenly and doesn't recover after flushing. Scale builds up on the heater and in the water system in a layer that narrows the passage—the machine runs weaker for months but steadily. A clogged valve or filter can masquerade as a pump failure: water comes out in a thin stream, but the motor sounds normal and doesn't overheat. A worn pump behaves differently—it hums louder, vibrates, and loses pressure in bursts, and the picture doesn't change after cleaning the water system. Flushing helps with a clog, but if the pressure doesn't return afterward, the part is already worn and cleaning won't restore it. In my view, it's easier to check the flow at the group outlet once than to take the machine apart twice because of a wrong diagnosis.
Most owners ask, "Can't we just clean it?" Let's look at how the pump is built and why in most cases it's replaced rather than restored.
A vibration pump is a sealed unit: the impeller and check valves are press-fitted into the housing, and you can't restore them without replacing the part. Inside, an electromagnet drives a piston-diaphragm that creates pressure in the water system, while the valve group keeps flow in one direction. The housing is soldered and crimped at the factory—you can't open it without damaging the parts and reassemble it leak-free in a workshop. On top of that, scale and running dry speed up wear: when the tank is low, the pump moves air and overheats. Regular flushing and descaling delay this, but don't prevent it. In my view, replacing the whole unit is more reliable than trying to revive press-fitted parts.
| Pump type | Where it's used | Replacement specifics | Service life |
|---|---|---|---|
| Vibration | household coffee machines | sealed unit, replaced as a whole | average |
| Rotary | professional coffee machines | harder to access the unit | longer |
| Ulka vibration | compact home models | standard for the household segment | average |
We replace the pump at your home or in our service center—whichever is more convenient. Here's what the job involves and what the technician does on site.
Replacing a coffee machine pump in Almaty starts with a visit: a technician arrives within 60 minutes anywhere in the city, runs free diagnostics, and agrees on the scope of work before starting the replacement. On site, they remove the housing, reach the pump assembly, disconnect the inlet and drain hoses, unscrew the mount, and take out the old pump. The new part goes into the same place with factory seals, and then the technician reassembles the hydraulic system in reverse order. Once installation is complete, they check the water supply under load — this shows that the assembly is properly matched to the hydraulic system, not just installed. In my view, it is this pressure test that separates careful work from a quick job: a loosely tightened connection shows up with the very first cups.
Along with the pump, we inspect the hydraulic system valves, the water sensor, and the seals — worn gaskets can leak after a new pump is installed. The valves control the flow, and scale makes them stick: a fresh pump runs, but the water comes in spurts. The level sensor tells the board when the tank is empty, and when dirty it sends false stop signals. We check the seals and gaskets at the hose joints for microcracks and replace them right away while the housing is open. If the machine still doesn't take in water, the cause may be a clog or a sensor, so we inspect the entire hydraulic system, not just the pump. That's why our coffee machine pump repair in Almaty starts with diagnostics of the whole supply line: replacing one component without checking the neighboring ones often brings the machine back to the service center.
Before booking, the owner should know who will arrive and what happens with the warranty. Here are the terms we work under.
We provide a 1-year warranty on the pump replacement — both on the labor and on the installed part. It covers the entire scope: mounting the assembly, connecting it to the hydraulic system, and checking the outlet pressure. If the new pump fails due to our fault during this period, we will return and fix the cause. In my experience, most failures are not related to the part itself but to scale in the circuit and running dry: when the tank runs out of water, the pump moves air and wears out quickly. The warranty is valid if the operating rules are followed: regular descaling and running with a full tank extend the life of the new pump. Another common source of problems is hard water: salts settle on the impeller and gradually reduce the assembly's performance.
The cost of replacement depends on the pump type and the coffee machine design, so the exact amount is quoted after free diagnostics. Below is what makes up the price and which machines we work with.
We give you the price after a free diagnostics — it depends on the type of pump, the class of the machine, and any related work on the water system. A vibration pump in a household machine costs less than a rotary one, and if valves, hoses, or seals also need replacing, the scope of work grows. During the free diagnostics, the technician opens the housing, checks the outlet pressure, inspects the connections, and quotes the amount before any work begins. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer and agree on the scope of work in advance — so the owner knows what they are paying for and doesn't face extra charges after the repair. In my opinion, it's more honest to show the worn part right away and explain why a particular item appears in the estimate than to give a blind total over the phone.
Here's the key information about replacing a coffee machine pump: when the part has actually failed, why it's replaced rather than repaired, and what helps delay the next breakdown.
If you ask, the technician will check other parts during the same visit.
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your coffee machine is leaking, first unplug it, drain the water tank and wipe the drip tray, then don't turn it on until you find the cause.
22 January 2026 · 13 minutes read
You can descale your coffee machine using the standard descaling cycle with a descaling solution according to the instructions…
1 January 2026 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read