Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a massage chair

Massage Chair Repair in Almaty

We arrive at your home within 60 minutes. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Hand massager repairfrom2 500 ₸
  • Upholstery repairfrom4 000 ₸
  • Preventive maintenance (cleaning and lubrication)from4 500 ₸
  • Wiring restorationfrom5 500 ₸
All prices
2ГИСЯours4,96 064 reviews
2GIS · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common massage chair faults in Almaty

The most common symptoms and likely causes. The technician will determine the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much massage chair repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Hand massager repairparts not included

1–3 hours

from2 500 ₸

Upholstery repairparts not included

1–3 hours

from4 000 ₸

Preventive maintenance (cleaning and lubrication)exact price — after the free diagnostics

1–2 hours

from4 500 ₸

Wiring restorationexact price — after the free diagnostics

1–2 days

from5 500 ₸

Sensor replacementparts not included

1–2 hours

from5 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after massage chair repair in Almaty

Remote control malfunction

1–2 hourstime

from 8 500 ₸cost

Problem
The remote control buttons were burnt, the plastic overlay was cracked, the cable was frayed — the chair did not respond to commands.
What we did
The technician disassembled the remote, cleaned the button contacts, replaced the damaged cable, and installed an intact overlay, checking each button.
Result
All buttons work, the panel is smooth, the cable is new — the chair is controlled normally.
I want the same
Massage chair: control panel malfunction — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How massage chair repair works at your home in Almaty

Five steps from request to checking the chair's operation.

  1. Requeston the day of request

    Leave a request, the technician will clarify the model and symptom.

  2. Technician visitwithin 60 minutes

    The technician arrives anywhere in the city within an hour.

  3. Clarifying detailsbefore the visit

    The technician clarifies the model and symptom in advance to bring the right part.

  4. Preparing the spacebefore starting

    Clear the space around the chair and provide access to a power outlet to check the modes.

  5. Checking functionsafter repair

    List the important modes for the technician so they can check those specifically.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book massage chair repair in Almaty

Describe the symptoms and the model from the chair's label in your request so the technician brings the right tools.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE06

Reviews of massage chair repair in Almaty

Азамат Е.Order No. 54582 · 19 January 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Пользуюсь ежедневно, вопросов нет.

Repair: massage chair repair in

Арман К.Order No. 2024-5500 · 11 November 2024

ours

Смотрел, у кого есть запчасти на такую модель. Ребёнок уже проверил на прочность, держится)

Repair: massage chair repair in

Гульнара Б.Order No. 177712 · 26 October 2024

ours

Поломка застала перед командировкой, тянуть было нельзя. Заодно поменяли: плата. Работает как раньше, придирок нет.

Repair: massage chair repair in

Ляззат К.Order No. ZK-9780 · 21 July 2023

ours

Позвонил в три места, здесь единственные назвали цену сразу. Диагностика массажёра — с этого всё началось. Повод для визита: греется. Турарбек Кайрош подсказал, как продлить жизнь технике. Ни копейки сверху, как и обещали. Нужна была замена: двигатель. Мастер посмотрел, сказал, что возьмётся, и взялся. Пришлось пару раз позвонить самому, чтобы узнать статус. Включил, проверил, работает)

Repair: massage chair repair in

Владимир Н.Order No. ZK-2023/625 · 26 April 2023

ours

Құрылғы ескі болғандықтан, бөлшек табыла ма деп қорықтым. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды. Бір айдан бері ешқандай мәселе жоқ.

Repair: massage chair repair in

Санжар О.Order No. ZK-2022/278 · 7 July 2022

ours

Нужен был счёт и чек, у нас техника на балансе организации. Симптом был очевидный: не вибрирует. Второй месяц — полёт нормальный.

Repair: massage chair repair in

Полина В.Order No. ZK-2022/734 · 17 April 2022

ours

Құрылғыны жөндеуге әкелдім, бәрін тез қарап шықты. Жұмыс сапасы жақсы, артық шуы жоқ. Жұмыс барысын көрсетіп отырды, жасырған жоқ. Диагностика тегін болды, бұл жағы жақсы. Тексеру кезінде бәрін өзі көрсетті. Алдын ала айтқан уақыттан ерте бітірді. Бір күнде жөндеп берді, кешіктірмеді. Достарыма да айттым.

Repair: massage chair repair in

Айнур М.Order No. TS-2204-611 · 26 March 2022

ours

Турарбек Кайрош возился с этим дольше, чем планировал, но довёл до конца. Сказать, что доволен — ничего не сказать.

Repair: massage chair repair in

Эльмира Т.Order No. TS-5956 · 3 March 2022

ours

Танысым осы жерді мақтап, кеңес берді. Балалар бар, техникасыз қиын, сондықтан тез жөндеу керек еді. Тек кезекте аздап күттім.

Repair: massage chair repair in

Кристина Л.Order No. TS-3720 · 10 June 2021

ours

Техника на гарантии уже не была, так что выбор был свободный. Проверили при мне, показали, что всё держит.

Repair: massage chair repair in
Questions and answersQuestionsTECH SERVICE07

Questions about massage chair repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can the air cushions in a massage chair be repaired, or are they only replaced?

It depends on the model: cracks and punctures can often be fixed, while torn seams or material delamination are easier to replace. After diagnostics, the technician will tell you what can realistically be restored and what needs a new part.

The chair heats but doesn't massage — is it a sensor or the control board?

More often it's not the sensor but the roller drive or the board that isn't sending it a command. Diagnostics pinpoint the exact component: the motor, limit switches, and signals from the board are checked rather than replacing everything in sight.

The chair works but the rollers don't move — is it the motor or the board?

Both are possible: a jammed carriage, a worn motor, or no signal from the board. The technician checks the mechanics and electrics one at a time so a working component isn't replaced.

How can I tell if a technician knows massage chairs rather than upholstered furniture?

A chair specialist immediately asks about the model, the code on the display, and how the rollers, compressor, and cushions behave. An upholsterer usually talks only about the covering and frame and doesn't understand the chair's electronics.

What should I do if the chair is leaking — is it dangerous for the electrics?

Yes, liquid near the wiring and board can short the contacts, so it's best to cut power to the chair and not turn it on. Before the technician arrives, don't tilt it or try to take it apart yourself.

Can a massage chair be repaired at home in Almaty?

Yes, the technician fixes most faults on site: the board, compressor, remote, and mechanics. The chair is taken to the service center only if complex frame repair is needed or a component can't be disassembled at home.

Repair guideArticleTECH SERVICE08

Massage Chair Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs massage chairs in Almaty: our technician comes to your home within 60 minutes or picks up the chair for service. Diagnostics are free, we provide a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. We quote the price after diagnostics.

Why the chair won't turn on and what to check before calling a technician

The unit doesn't respond to the start button — this is the most common reason to call a technician. Let's go over what you can check yourself and where the electrical zone begins.

What to check yourself before calling the service

  • Outlet: plug in another device — if it works, there's power in the outlet and the issue is with the chair itself.
  • Power cord: inspect it along its entire length and where it enters the body — kinks, bends, and exposed areas can cut power to the whole unit.
  • Connectors: check that the plugs are firmly seated in the sockets on the body and on the external unit.
  • Remote: release the lock with the button on the body or by holding the key — many models don't respond to commands in locked mode.
  • Hard surface: if the unit is on a fluffy carpet, the limit switch in the base may not trigger — move it to the floor and try again.

Why the chair won't turn on and which components the technician checks

Our technician starts with the power supply and fuse, then checks the control board and remote — in 8 out of 10 cases the cause is in one of these components. Diagnostics are free, and a visit within the city takes up to 60 minutes. The power supply is responsible for delivering voltage to all systems: if it drops or breaks, the chair won't start. The fuse blows first during a power surge and protects the expensive electronics. The board receives signals from the remote and distributes them to the components — oxidation or cracks in the solder break the connection. The remote and cord are checked for contact integrity. Massage chair repair in Almaty is performed by our technician after this component check. You can't install a higher-rated fuse: it protects the electronics, and during a voltage surge the electronics will burn instead of the cheap part.

What not to do before the technician arrives

  • Open the body while powered: capacitors on the board retain charge after disconnection, and touching them can give you an electric shock.
  • Disassemble the pneumatics: tubes and chambers are under pressure, and depressurizing them leaves the unit without massage even after the main fault is fixed.
  • Replace the fuse with a higher rating: protection stops working, and during the next surge the electronics burn instead of the cheap part.
  • Apply power after a leak: if liquid is leaking from the body, unplug the cord from the outlet and don't turn it on until the technician arrives — moisture on the board causes a short circuit, and then the repair will cost more.

How diagnostics and repair of a massage chair are done

Let's go over how the technician finds the cause of the breakdown, when they fix it on-site versus take the chair to the service center, and how this affects the final cost.

How the technician finds the cause of the breakdown

We trace the symptom through the chain: power, control, mechanics, pneumatics, heating — this way the cause is found in one visit, not by randomly replacing components. First we check the power supply and control board: they account for most failures when the chair doesn't respond to buttons, turns off by itself, or goes dark mid-program. Next is the mechanics — the roller mechanism and guides, where wear shows up as knocking, jerking, and the carriage stopping at the same point. Then the pneumatic system: air leaks in the cuffs and hoses cause weak pressure or complete failure of the cushion, even though the compressor may be working fine. The chain ends with the heating element, which is checked for resistance and continuity. An error code on the display narrows the search to a specific component but doesn't replace testing: the board may show a motor error when the problem is a jammed carriage.

When we repair on-site and when at the service center

Type of failureWhere we fix itWhat the technician does
Won't turn on, won't hold powerAt your homeChecks the power supply and control board
Remote or heating not workingAt your homeReplaces the module on site
Knocking, carriage jerkingAt our service centerRemoves the casing, replaces the rollers
Pneumatic system won't hold pressureAt our service centerDisassembles the pneumatic system, finds the leak

How repair pricing works

The technician gives you the price after a free diagnostic check: it covers both labor and the part, and you can pay any way that suits you. The diagnostic itself is free — you only pay for the repair you agree to and for the part if it needs replacing. The control board, motor, and heating element usually fit into one price, while replacing the roller mechanism or pneumatic system is quoted separately because it requires disassembling the casing and takes more time. Sometimes replacing the board costs more than repairing the same unit — the technician explains both options so you can make an informed decision, not just "replace everything." Our team's experience shows that honestly comparing the two scenarios saves the owner unnecessary expense: not every fault requires a new part. And it's best to agree on the work before disassembly — changing your mind afterward costs more.

What the error code and other display symptoms mean

An error code, no heating, rollers stopping, and leaks are the most common symptoms after "won't turn on." Let's break down which component is behind each one and how to quickly narrow down the fault.

Error code on the display and what it means

An error code is a hint, not a diagnosis: it points to the component the control board thinks is faulty, but the cause could be the sensor itself or jammed mechanics. The board polls position sensors, motors, and heating elements, and when a signal goes out of range, it displays a fault number. The same code means different things on different models: on one line it's a break in the roller mechanism circuit, on another it's a calibration failure after a power surge. The model and serial number are on the nameplate under the upholstery or on the bottom panel — use them to look up the exact meaning for your line. Write down the code and the chair model before the technician arrives: with the nameplate and code, they'll quickly understand which chain of components to work with and bring the right parts.

The chair doesn't heat or massage one zone

  • Heating won't turn on: the heating element and its contacts are checked — a broken coil or oxidized terminals produce the same symptom as a board failure.
  • Rollers won't move: the cause is more often the drive motor or a jammed carriage, not the control electronics.
  • Massages but doesn't heat: the zone stays cold while the mechanism works — they look for a break in the heating circuit and check the temperature sensor.
  • One zone stopped working: the chair doesn't detect when the rollers reach the right point and stops them early — the position sensor is at fault.

Liquid leaking from the chair — how dangerous is it

A leak in a massage chair is either condensation in the pneumatic system or lubricant from the mechanism; in both cases, unplug the chair before the technician arrives. The pneumatic system consists of a compressor, valves, and hoses: when seals wear out, air with moisture escapes and settles as drops under the upholstery. Lubricant leaks from the guides and gearboxes when seals lose their elasticity — this fluid leaves dark marks on the fabric. More dangerous than the leak itself is fluid on the control board: moisture and oil cause contact corrosion, and even after fixing the cause, the board should still be checked, otherwise the fault returns within a few weeks. Before the technician arrives, don't turn the chair on or tilt it, so the liquid doesn't spread to the electronics.

Seller's warranty vs. service warranty

The chair may or may not be covered by the seller's warranty — that determines where to go. Let's look at both scenarios and what the service warranty gives you.

Chair under seller's warranty — go to the seller or to a service center

If the seller's warranty is still valid and the breakdown falls under its terms, it makes sense to start with the seller; if the warranty has expired or doesn't cover the component, an independent service center will resolve the issue faster. The warranty period is protected by law, but the specific list of covered cases is written in the warranty card of the particular retail location. Upholstery, fabric covers, and decorative elements are usually not included — they are considered wear parts. The seller's warranty typically covers mechanics and electronics: the motor, control board, power supply. However, the seller more often sends the chair for an expert evaluation and waits for a conclusion rather than sending someone with tools. Before contacting them, reread the warranty terms — they specify which components are covered and for how long. If the breakdown involves upholstery or the period has expired, contacting the seller only wastes time: a massage chair repair technician will determine the cause on site and offer a solution.

What warranty we provide

We provide a 1-year warranty on labor and parts — this applies to both home visits and in-shop repairs. Diagnostics before starting is free, so the owner knows in advance which component has failed: the motor, control board, rollers, or power supply. We record the replaced part and the work performed so that if you contact us again, it's clear what to check. The warranty on parts is more important than the warranty on labor: if a part fails prematurely, we replace it rather than shifting the cost to the owner. In my view, this is the point that most often decides the dispute in favor of the owner — the work may be done flawlessly, but the quality of the component shows up later. That's why we source parts from suppliers we are ready to stand behind for the entire year.

What to do if the breakdown returns after repair

If the breakdown returns within the warranty year, we handle it under warranty: the technician comes again and checks the same component. First, we compare the symptom with what was fixed: the same error code, the same zone failure, or a new malfunction. A repeat breakdown of the same component often indicates not the quality of the part but an undetected root cause — for example, board overheating due to a clogged filter or low voltage in the mains. Therefore, on a repeat visit, the technician examines not only the replaced part but also its operating conditions. In our practice, a repeat warranty visit usually ends with finding a contributing cause rather than replacing the same element again. The owner should recall in advance under which modes and how often the failure occurred — this speeds up the search.

How to choose a massage chair technician

In the Almaty market, massage chairs are repaired by furniture makers, aggregators, and private contractors. Let's break down how a specialized technician differs and what to look for so you don't pay twice.

How a chair technician differs from a furniture maker

A furniture maker works with the frame and upholstery, while in a massage chair the main thing is electronics and pneumatics: the control board, motors, compressor, valves, and sensors. The pneumatic system consists of a compressor, valves, and hoses, and a leak in any of these components produces the same error on the display as a burned-out roller motor. Without experience in such a scheme, components are replaced at random: first the compressor, then the board, and only then is a cracked hose found. Diagnostics begins with measurements at the connectors and checking pressure in the circuit, not with disassembling the casing. Ask the technician how he checks the pneumatic system and the board — if the answer is only 'we'll replace the component,' most likely there will be no real diagnostics.

Which chairs and brands we service

We service both home and commercial massage chairs, including Casa&More, Casada, and UNITEX, as well as related equipment: massage beds, tables, and percussion massagers. In home models, roller motors and the control board are the most common failures; commercial models add pneumatics and the backrest recline mechanism. Chairs with combined roller and air massage require checking both systems at once, because an error on the display doesn't always point to the faulty component. A separate category is heated models: they add a heater circuit to the board, and it's checked together with the temperature sensors. Commercial chairs from salons and fitness clubs wear out their components faster, so rollers and pneumatics on them are checked more often than on home models.

What to look for when choosing a service

Pay attention to three things: who exactly will come (their own technician or a middleman), whether diagnostics are free before any work, and whether they provide a warranty on labor and parts. We arrive within 60 minutes anywhere in the city, diagnostics are free, there's a 1-year warranty on labor and parts, and the price is quoted after inspection. An aggregator passes the request to a private contractor, and in that case the warranty is provided by the contractor, not the platform — if the problem comes back, there's no one to turn to. Tech Service sends its own technician, not a middleman, so the service is responsible for the result, not a random contractor. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer — another sign of a direct contractor who doesn't need to forward money to a subcontractor.

How we work and what to know about a home visit

Below is how a technician's home visit works, what they bring in their case, and how work is approved after a free chair diagnostic.

How a technician's visit works

The technician arrives at your home within 60 minutes anywhere in the city, performs a free diagnostic, and only after that quotes the price and approves the work. Our staff specialist comes to your address — not a courier or a middleman with someone else's crew: the same person inspects the chair and does the work. Diagnostics start with checking the power supply and control board, then the technician runs the roller mechanism, listens to the drive, and checks the air system for leaks. After the inspection, you get a list of faults and the scope of work, not a vague "it needs to be taken apart." If the chair is heavy and in a tight room, clear some space around it in advance — this speeds up diagnostics and reduces the risk of damaging the upholstery during disassembly.

What the technician brings and how approval works

The technician arrives with diagnostic tools and a set for disassembling the body, and after diagnostics explains exactly which part failed and what work is needed. In the case: a multimeter for checking power circuits, a bit set for various fasteners, zip ties for securing wires, and consumables to carefully remove the upholstery. Approval is itemized: which part failed, whether it's replaced or restored, how much work is involved, and what exactly will be included in the final list. This order matters not for formality: if a second fault is found during disassembly, the technician stops and discusses it separately rather than adding it to the bill without approval. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and there's a 1-year warranty on the work performed and on parts.

What wears out first and how to extend service life

  • Roller mechanism: rollers and guides take the main load and wear out before other components — they're checked first.
  • Drive belts: stretch and start slipping, causing jerky movement or one zone to stop moving.
  • Air cushions: lose airtightness at seams and fittings, and the chair stops inflating in a specific zone.
  • Control board and power supply: last longer than mechanical parts but are sensitive to overheating and power surges.
  • Upholstery and foam: wear at contact points with rollers, especially with continuous use and on intense modes.
  • Standby mode: don't leave the chair on for a full day — the board and power supply heat up even without load, which speeds up contact wear.

Massage chair repair facts for comfort seekers

Here's a quick rundown of the key things a chair owner should keep in mind before calling a technician — a short list, without repeating points from the previous sections.

  • The "won't turn on" symptom: most often it's related to power, the control board, or the remote, not the mechanics — start by checking the electrical chain.
  • Error code: it narrows down the fault but doesn't replace a step-by-step check of components along the chain from the power supply to the motor.
  • Home visit: covers most breakdowns; the chair is taken to the workshop for complex mechanical and pneumatic issues that require full disassembly.
  • Seller's warranty vs. technician's warranty: these are different things; if the seller's warranty has expired, an independent technician can diagnose and fix the problem faster.
  • Choosing a specialist: what matters is expertise in the chair's electronics and pneumatics, not general experience with upholstered furniture.

12brands

Which massage chair brands we repair in Almaty

Choose a brand to go to the page with repair specifics for that brand.

We also repairWe also repairTECH SERVICE09

Besides massage chair repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before massage chair repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISЯYandex Maps
Send a review with photos on WhatsApp