Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a monitor

Monitor Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • 4 to 20 years of experience
  • Arrival within 60 minutes

Our own technicians4 to 20 years of experience

Maksim S.Dmitriy R.Rais M.Roman M.

Repair prices

  • Diagnostics0 ₸
  • Dust cleaningfrom5 000 ₸
  • Color calibrationfrom5 000 ₸
  • HDMI, VGA, DisplayPort port replacementfrom6 000 ₸
  • Power connector replacementfrom7 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common monitor faults in Almaty

The symptom points to a component, but the exact cause is determined by the technician after free diagnostics. Below are common combinations and the work that fixes them.

PricesPricesTECH SERVICE03

How much monitor repair costs in Almaty

Choose a tab by symptom to see the required work and its price.

Dust cleaningexact price — after the free diagnostics

1–2 hours

from5 000 ₸

Color calibrationexact price — after the free diagnostics

1–3 hours

from5 000 ₸

HDMI, VGA, DisplayPort port replacementparts not included

1–2 hours

from6 000 ₸

Power connector replacementparts not included

1–2 hours

from7 000 ₸

Monitor firmware updateexact price — after the free diagnostics

1–2 hours

from7 000 ₸

TECH SERVICE mobile technician with a tool case

How monitor repair works at your home or office in Almaty

Five steps from request to checking the work on your monitor.

  1. Requeston the day of request

    You describe the symptom, the technician clarifies the monitor model and the nature of the issue.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city, bringing tools and testers.

  3. Diagnosticsfree

    The technician records the inspection results in the request and agrees on the list of work with you.

  4. Approvalbefore work

    You choose whether to repair on-site or after ordering parts, and agree on the timing.

  5. Checkafter repair

    Accept the work by signing the act and keep the warranty document for the completed repair.

Leave a request
TechniciansTechniciansTECH SERVICE04

Our computer and laptop repair technicians in Almaty

The computer and laptop repair department in Almaty has 7 technicians with 6 to 15 years of experience.

  • 7 technicians in Almaty
  • 6–15 years of experience in the department
  • Article author Maksim S., 10 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 7 specializations — they are listed on the technicians' cards.

01 / 07
Maksim S., graphics card repair technicianexperience10 years

Maksim S.

Graphics card repair technician

Dmitriy R., PC and laptop diagnostics technicianexperience6 years

Dmitriy R.

PC and laptop diagnostics technician

Rais M., laptop repair engineerexperience8 years

Rais M.

Laptop repair engineer

Roman M., software installation specialistexperience10 years

Roman M.

Software installation specialist

Sergey A., PC and laptop repair technicianexperience7 years

Sergey A.

PC and laptop repair technician

Sergey M., diagnostics and virus removal specialistexperience13 years

Sergey M.

Diagnostics and virus removal specialist

Turarbek K., consultantexperience15 years

Turarbek K.

Consultant

We reply during working hours

Book monitor repair in Almaty

Ask the operator about the service area and what monitor details are needed if the model is unknown.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE05

Reviews of monitor repair in Almaty

Ляззат К.Order No. 991412 · 4 July 2026

ours

Смотрел, у кого есть запчасти на такую модель. Симптом был очевидный: не включается. Работает как раньше, придирок нет.

Repair: monitor

Наталья С.Order No. 2026-7206 · 24 May 2026

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Жалоба простая: мерцает подсветка. Сказать, что доволен — ничего не сказать)

Repair: monitor

Полина В.Order No. 85056 · 1 May 2026

ours

Поломка застала перед командировкой, тянуть было нельзя. Основная жалоба — полосы на экране. С тех пор ни разу не подвёл.

Repair: monitor

Эльмира Т.Order No. 2026-8006 · 8 February 2026

ours

Основная жалоба — полосы на экране. Сергей Архипов подсказал, как продлить жизнь технике. Все разъёмы на месте, ничего не люфтит.

Repair: monitor

Артём К.Order No. ZK-2025/289 · 12 August 2025

ours

Повод для визита: полосы на экране. Дамир М перезвонил, когда всё было готово. Tech-service посоветовали в чате дома, спосибо им. Даже настройки не сбились, что удивительно

Repair: monitor

Ирина Т.Order No. TS-1909 · 29 June 2025

ours

Хотел сначала вызвать мастера на дом, потом передумал. Симптом был очевидный: нет изображения. Второй месяц — полёт нормальный.

Repair: monitor

Алишер У.Order No. TS-2506 · 29 September 2023

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Включил, проверил, работает.

Repair: monitor

Эльмира Т.Order No. 66640 · 4 April 2022

ours

Друг посоветовал, у него похожая история была. Привёз на диагностику: монитор. Больше всего напрягало: мерцает подсветка. Дамир М честно сказал, что менять, а что ещё походит. Приехал вечером, мастер ещё был на месте. Нужна была замена: плата. Проверили при мне, показали, что всё держит!!

Repair: monitor

Азамат Е.Order No. 99217 · 22 August 2021

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Вечером включил — и всё стало ясно: мерцает подсветка. Всё оформили по договору, с печатью. Мастер показал, что меняет: подсветка. По деньгам вышло адекватно, в другом месте просили больше. Спасибо за работу. Функции все на месте, ничего не отвалилось.

Repair: monitor

Азамат Е.Order No. ZK-2021/869 · 21 August 2021

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Назвали 12 000 сразу, в конце сумма не изменилась. Все разъёмы на месте, ничего не люфтит.

Repair: monitor
Questions and answersQuestionsTECH SERVICE06

Questions about monitor repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How much does monitor repair usually cost?

The cost depends on the issue: replacing the backlight or repairing the power supply costs less than replacing the panel. The technician will give you an exact quote after free diagnostics.

Can a monitor with a cracked screen be repaired?

Yes, by replacing the panel — that's the main fix. In some cases only the glass is cracked, but more often the whole module is replaced. The decision is made after diagnostics.

Why won't the monitor turn on if the light is on?

Most likely the issue is with the power supply or backlight circuits: the indicator shows power is present, but internal components aren't starting up. Diagnostics will pinpoint the cause.

How can I tell what's broken if the monitor works but there's no image?

Connect the monitor to another signal source and try a different cable. If the image still doesn't appear, the monitor or graphics card is probably faulty — diagnostics are needed.

What should I do if stripes appear on the monitor?

Stripes can be caused by the ribbon cable or the panel. The cable can sometimes be repaired; the panel is usually replaced. Diagnostics will give you a precise answer.

Can a high refresh rate gaming monitor be repaired, or is it easier to buy a new one?

Repair is possible and often worthwhile: replacing the backlight or power supply costs less than a new monitor. The decision depends on the condition of the panel — the technician will assess it after diagnostics.

Repair guideArticleTECH SERVICE07

Monitor repair in Almaty by Tech Service with a technician visit

Maksim S., graphics card repair technician

Author: Maksim S.,Graphics card repair technician

Published
Updated

Tech Service is a direct provider of monitor repair in Almaty: our technician arrives at your home within 60 minutes or takes the monitor for repair at the service center. Diagnostics are free, there is a 1-year warranty on labor and parts, and technicians have 4 to 20 years of experience. The technician provides the cost after diagnostics.

What breaks in a monitor and why monitor repair is sometimes needed

A monitor fails in several typical scenarios, and each symptom has a likely cause — it determines what the technician does.

The monitor does not turn on or does not come out of standby

If the indicator on the case does not light up, most often the power supply or a circuit on the control board is to blame, not the panel. This unit converts mains voltage into operating lines for the control electronics and backlight, and if capacitors break down or the PWM controller fails, the screen remains completely without power. A separate case is when the lamp lights but there is no image: then voltage reaches the board, but the failure lies in the lamp startup circuits or the inverter itself. External adapters in compact models fail no less often than internal ones, and the symptom is identical — the device does not respond to the button. Before taking the equipment to the service center, check the outlet and the external adapter — with a faulty adapter, the device behaves as if it is completely dead, although it is fine.

Stripes, spots, flickering, and color distortion

Vertical stripes and flickering are more often related to the ribbon cable or lamps, not the matrix itself, so the panel is not always replaced. The ribbon cable connects the control board to the screen, and oxidation of contacts or loose pressure causes stripes that disappear when you lightly press on the frame. LED strips are responsible for uniform image: burnout of individual diodes causes spots, bright areas at the edges, and a yellowish tint in the corners, while color distortion often comes from degradation of diffusers. Pressure spots are a result of improper transportation or impact, and here diagnostics show whether the panel layers are affected or only the films. Flickering that appears only at low brightness usually indicates degradation of LED strips, not a dying matrix — start checking the lamp power.

Table of symptoms and likely causes

SymptomLikely causeWhat the technician checks
Does not turn on, indicator offPower supply, power circuitPower supply and control board
Indicator on, no imageBacklight, ribbon cable, boardBacklight and ribbon cables
Vertical stripesRibbon cable, matrixRibbon cable contact, panel
Flickering at low brightnessLED backlight stripsBacklight
No signal on portsPort, cable, boardHDMI, DisplayPort, VGA ports
Spots and bright areasBacklight, pressure on panelBacklight uniformity

How to tell if the monitor itself is broken, not the computer, before monitor repair

Before calling a technician, it is worth ruling out a computer, cable, or graphics card failure — this saves time and removes the main fear before calling.

Self-check checklist before calling a technician

  • Another cable: replace the HDMI or DisplayPort cable with a known working one and see if the image appears.
  • Another source: connect the monitor to a laptop or another system unit to rule out a graphics card issue.
  • Another port: try VGA if available on the case instead of HDMI or DisplayPort.
  • Indicator: check if it is on, what color it is, and whether it blinks in standby mode.
  • Monitor menu: check if it opens with the buttons on the case — this shows whether the control board is alive.
  • No signal message: it indicates no signal from the source, not necessarily a broken screen.

When the cause is actually in the monitor

If the monitor doesn't respond to another source or cable and the menu won't open, the problem is inside the monitor — and our technician will confirm it during free diagnostics. We start by checking the power supply and control board: these two components are most often responsible for a blank screen and being stuck in standby. An oxidized power connector often produces the same picture as a dead panel, so we don't name the cause over the phone before inspection. Continuity testing of power circuits and signal checks are done by a technician with the panel open, not by the client following internet instructions. Even with obvious signs of failure, we check power and signal first to avoid replacing working components. This approach saves parts: swapping a working power supply for a new board doesn't solve the problem, it only masks the real cause.

Why a monitor technician won't fix a graphics card

We repair monitors, not system units, so if diagnostics show a graphics card failure, we'll tell you honestly. A graphics card and a computer's motherboard are separate equipment with their own circuitry, and our expertise doesn't cover them: different skills and different tools. Tech Service works as a direct contractor, not an aggregator or intermediary — our own technician comes to you, not a third-party subcontractor. A direct contractor doesn't pass the job to a third party — you know right away who's responsible for the result. If free diagnostics show the system unit is at fault, we'll point you to the right specialist and won't charge for work we didn't do.

What to do before the monitor repair technician arrives in case of breakdown or liquid spill

Your first actions after a breakdown or spill affect what can be saved — and some mistakes happen in those very hours.

First aid for a monitor with liquid damage

  • Unplug the power: pull the plug from the outlet immediately, without using the power button — this breaks the circuit before liquid reaches the contacts.
  • Don't turn it back on: every attempt to power a wet control board increases damage and reduces the chances of recovery.
  • Don't use a hair dryer: a hot air stream pushes liquid deeper into the board and damages more components than the moisture itself.
  • Tilt the case: let the liquid drain away from the screen toward the bottom, placing an absorbent cloth under the edge.
  • Call a technician: the sooner diagnostics begin, the higher the chance of saving the board and power supply without replacement.

How to prepare your monitor for repair

Before the technician arrives, just have the monitor, power cable, and external adapter if you have one ready — no need to take anything apart. Gather the HDMI, DisplayPort, or VGA cables you use nearby: this helps the technician replicate your setup and pinpoint the cause more accurately. Clear access to the back panel and ports by moving extra items away from the desk. If the monitor is connected to a computer through an adapter or docking station, leave those too — a failure in the chain sometimes masquerades as a screen breakdown. The technician arrives at your home within 60 minutes anywhere in the city, so preparation saves time during intake. If the monitor is mounted on a bracket, take it off beforehand — this way the technician can reach the ports faster and won't waste time on dismounting.

What you definitely shouldn't do yourself

Disassembling a monitor without experience more often damages cables and the panel than fixes it. Fragile case clips break when pried carelessly with a screwdriver, and thin cables between the control board and panel tear from a sudden movement. The panel creates the image, and replacing it costs more than most paid repairs you were trying to avoid. You also shouldn't heat the board with a household hair dryer or soldering iron: without temperature control, traces and nearby components come loose. Trying to 'reboot' the monitor dozens of times with a faulty power supply only finishes off the fuses. The panel and cables are easily damaged when removing the case carelessly, and then a panel replacement is added to the original problem — which is a whole different scope of work.

At home or at the service center, and how repair with warranty works

A monitor is a large piece of equipment, and the format of work matters here: some tasks the technician handles on-site, while others are better done in the service center with proper lighting and space for a large screen.

When the technician repairs on-site and when they take it to the service center

Our technician arrives within 60 minutes anywhere in the city and performs free diagnostics on the spot. If a matrix replacement or complex soldering is needed, it's more convenient to take the device to the service center. On-site visits cover typical cases: backlight won't turn on, settings are off, a cable came loose, the power supply on an external model is acting up. Replacing a lamp, cleaning dust from the board, and replacing capacitors are also done on-site if the technician has the necessary part. When it comes to the panel itself, monitor restoration in Almaty is done at the service center — the matrix is replaced on a workbench with enough space for a large screen. Monitor repair in Almaty in this format is faster and more accurate, since the technician isn't hindered by cramped home conditions. The format doesn't affect the warranty: it covers both the procedure performed and the parts in either case. In my opinion, for a 27-inch model with a damaged panel, it's safer to bring it to the service center than to replace the matrix on a coffee table.

How the repair goes from diagnostics to pickup

  • Diagnostics: free, the technician identifies the cause of the breakdown and rules out cases where the screen isn't at fault.
  • Approval: cost and scope are discussed before work begins, with no surprises at the end.
  • Repair: replacement or restoration of the faulty component — from the power supply to the backlight lamp.
  • Testing: the device is checked after the repair at different resolutions and brightness modes.
  • Pickup: with a 1-year warranty on labor and parts, and a check in your presence.

What the warranty covers and what to do if the problem comes back

We provide a 1-year warranty on labor and parts, so if the same problem recurs due to our fault, the work is redone under warranty. If a month after replacing the backlight dark stripes appear again or the device stops coming out of standby, just describe the symptom — the technician will compare it with the previous visit and take it in for repair again. The warranty covers both the part and the technician's work — this matters because some failures don't show up immediately but after weeks of use. Warranty claims don't require paying for diagnostics again: the fault is already known from the first visit. In our experience, repeat visits are more often related to operating conditions — overheating near a radiator or voltage spikes — and we warn about this at pickup.

When it's worth repairing a monitor and when it's easier to replace it

Not every breakdown is worth fixing, and an honest answer to the question "repair or replace" saves the customer money. Here are the criteria our technicians use to decide.

Criteria that justify restoration

  • Intact matrix: a screen without cracks, deep scratches, or extensive bright spots is the basis for restoring components.
  • Individual component: a failure of the power supply, backlight, control board, or connector is fixed by replacing the specific part.
  • Gaming and professional models: restoring the electronics is more cost-effective than buying a new screen, since the module is expensive.
  • Older monitors: restoring a component extends the device's service life as long as the matrix still produces a clear image.
  • Connectors and cables: a damaged HDMI or DisplayPort input is replaced separately, without touching the panel itself.
  • Power supply and backlight: these components fail more often than others, and restoring them gets the device working again for years.

When restoration is not advisable

If the matrix is cracked or the screen is damaged across its entire area, replacing the module often costs as much as buying a new monitor. A crack in the glass and internal fractures after an impact affect the structure itself, and it can't be restored without installing a whole module, while a new one for budget and mid-range models comes close in cost to the price of a similar device. The same logic applies to extensive backlight bleed and burned-out areas across the entire surface: the defect is spread throughout the matrix rather than concentrated in one unit. In such cases, the technician says so directly after diagnostics instead of pushing a replacement. The decision is up to the owner, but we believe it's right to call an impractical repair exactly that — it's more honest than taking the device in just to produce a formal result. Diagnostics remain free, so declining the work doesn't turn into lost money.

Specifics of gaming monitors and Apple displays

We repair gaming monitors with high refresh rates, professional displays, and Apple monitors — their components require care, but the diagnostic principle is the same. Gaming models and professional displays have higher demands on backlighting and ribbon cables, so precise part selection matters during restoration. IPS, VA, TN, OLED, and QLED screens handle heat and disassembly differently: OLED is sensitive to pressure, while VA is sensitive to case distortion during careless opening. Apple displays are tightly assembled, and disassembly requires patience to avoid damaging mounts and cables. In our experience, restoring the backlight and board on such models pays off more noticeably than on budget ones: the device itself costs more, and repairing the unit preserves more of the investment. The 1-year warranty on labor and parts applies to them just as it does to regular monitors.

Which monitors we repair and how the cost is formed

We handle monitors of various types and brands, and the cost depends on which unit has failed and which parts are needed.

Monitor types and brands we work with

Monitor typeWhat we consider during repair
LCD and LEDBacklight and power supply
Gaming modelsHigh refresh rate, ribbon cables
Professional displaysColor accuracy
Apple monitorsCareful case disassembly
Older VGA modelsCCFL backlight, connectors

What the repair cost consists of

The technician quotes the cost after free diagnostics, and it depends on which unit is faulty and which parts are needed. In our experience, the most expensive jobs are those where the matrix itself or the backlight unit is replaced: these are the most resource-intensive components of an LCD panel. Restoring the power supply, replacing capacitors, ribbon cables, and connectors costs less — there are fewer parts and the operation is local. The final amount is also affected by the matrix type: IPS, VA, TN, OLED, or QLED each behave differently when they fail, and each requires its own set of components. Diagnostics are free, so even if restoration turns out to be impractical, you don't pay for the check itself — the technician disassembles the monitor, names the cause, and only then states what the work will cost. This order removes the owner's main fear: they know the amount before work begins, not after.

How long the repair takes and how to pay

Timing depends on the issue and the parts needed, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. Simple jobs like replacing capacitors or repairing a connector take less time than work on the matrix or backlight, which requires careful removal of the case and panel. Around the city, the technician arrives within 60 minutes, so we do the initial check at your home without waiting in line. The specialist gives you the exact timing after diagnostics, once it's clear which unit needs replacing and what parts are required. There's a 1-year warranty on labor and parts — if the problem comes back after the repair, we handle it as a warranty claim. Our technicians have 4 to 20 years of experience in service, and from the nature of the fault they often identify the needed part even before taking the case apart.

Monitor repair what to consider

Diagnosing a fault comes down to three steps: recognize the symptom, rule out the system unit, and choose the repair format. Below is a quick summary to help you decide without rushing.

  • The symptom points to the unit: the nature of the fault — no image, lines, flickering — gives you a rough idea of which board or cable has failed.
  • Check before calling: a different cable and a second signal source will show in a couple of minutes whether the monitor is to blame or the system unit.
  • First aid for spills: unplug the power right away and don't use a hairdryer — the airflow pushes moisture deeper under the matrix film.
  • Repair format: the technician handles some jobs at your home, while complex cases that require taking the panel apart are brought to the service center.
  • When repair makes sense: if the matrix is intact and the backlight, inverter, or power module is acting up, repair is usually worth it.

32brands

Which monitor brands we repair in Almaty

Pick a brand to see the page describing the work and common issues for your model line.

We also repairWe also repairTECH SERVICE08

Besides monitor repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before monitor repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp