Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a climate control equipment

Climate Control Equipment Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience
  • Arrival within 60 minutes

Our own technicians4 to 20 years of experience

Vladimir D.Mikhail K.Rashid I.Konstantin K.

Repair prices

  • Diagnostics0 ₸
  • Heater or air curtain wiring repairfrom3 500 ₸
  • Heater or air curtain heating element replacementfrom4 000 ₸
  • Air conditioner drain cleaningfrom4 500 ₸
  • Heater thermostat replacementfrom4 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common climate equipment faults in Almaty

Common symptoms by device type — find yours and ask the technician about the cause.

PricesPricesTECH SERVICE03

How much climate equipment repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Heater or air curtain wiring repairexact price — after the free diagnostics

1–3 hours

from3 500 ₸

Heater or air curtain heating element replacementparts not included

1–3 hours

from4 000 ₸

Air conditioner drain cleaningexact price — after the free diagnostics

1–2 hours

from4 500 ₸

Heater thermostat replacementparts not included

1–2 days

from4 500 ₸

Heater or air curtain fan motor replacementparts not included

1–2 days

from4 500 ₸

TECH SERVICE mobile technician with a tool case

How climate equipment repair works at your home in Almaty

Five steps from request to checking the work.

  1. Requestsame day

    Tell us the device type, model, symptom, and a convenient visit time.

  2. Diagnosticsfree

    The technician finds the cause of the breakdown and quotes the repair cost.

  3. Approvalbefore work

    You approve the scope of work and the cost of parts.

  4. Repairby appointment

    The technician performs the repair on site using the necessary parts.

  5. Checkafter repair

    You inspect the unit, check operating modes, and make sure there are no unusual noises.

Leave a request
TechniciansTechniciansTECH SERVICE04

Our climate equipment repair technicians in Almaty

The climate control equipment repair department in Almaty has 8 technicians with 4 to 20 years of experience.

  • 8 technicians in Almaty
  • 4–20 years of experience in the department
  • Article author Vladimir D., 14 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Vladimir D., air conditioner service technicianexperience14 years

Vladimir D.

Air conditioner service technician

Mikhail K., senior air conditioner installerexperience20 years

Mikhail K.

Senior air conditioner installer

Rashid I., air conditioner repair technicianexperience12 years

Rashid I.

Air conditioner repair technician

Konstantin K., industrial air conditioner technicianexperience16 years

Konstantin K.

Industrial air conditioner technician

Rauan N., air conditioner service technicianexperience4 years

Rauan N.

Air conditioner service technician

Timur B., air conditioner maintenance technicianexperience14 years

Timur B.

Air conditioner maintenance technician

Ildar S., climate control system repair technicianexperience7 years

Ildar S.

Climate control system repair technician

Mukhamedzhan B., air conditioner installation technicianexperience5 years

Mukhamedzhan B.

Air conditioner installation technician

We reply during working hours

Book climate equipment repair in Almaty

Leave a request through any convenient channel and include the model, symptom, and address — the technician will confirm the details and arrange a visit time.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE05

Reviews of climate equipment repair in Almaty

Ирина Т.Order No. 115074 · 9 April 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Сначала сомневался, мало ли что. Больше всего напрягало: шумит. Цену обсудили до начала, сюрпризов не было. Позвонили заранее, предупредили, что задержится на полчаса. Заодно поменяли: двигатель. Однозначно да. Работает как раньше, придирок нет.

Repair: climate control equipment repair in

Дарья С.Order No. TS-2411-265 · 21 May 2024

ours

Пробовал найти мастера в своём районе, но все были заняты. Честно, уже готовился покупать новое, но обошлось. Первое, что заметил: не крутится. Мастер показал, что меняет: подшипник. Запчасть была в наличии, доплачивать не пришлось. Приняли, выдали квитанцию, всё по-человечески. Спасибо за работу. Починили и дали гарантию на месяц.

Repair: climate control equipment repair in

Богдан С.Order No. ZK-2023/459 · 9 December 2023

ours

До этого обращался в другой сервис, там только развели руками. Привёз на диагностику: вентилятор. Основная жалоба — не крутиться. Созвонились, договорились на удобное время, никто не тянул. Под замену пошло: подшипник. По деньгам вышло адекватно, в другом месте просили больше. Сделали и забыл про проблему!!

Repair: climate control equipment repair in

Вероника П.Order No. TS-2306-250 · 10 June 2023

ours

С чем пришёл: шумит. Никита М не стал навязывать дорогую запчасть, поставил нормальную. Включил, проверил, работает!!

Repair: climate control equipment repair in

Игорь Щ.Order No. TS-2304-747 · 26 May 2023

ours

До этого обращался в другой сервис, там только развели руками. Утром столкнулся с тем, что шумит. Всё оформили по договору, с печатью. Сказали 25 000, а потом ещё и скидку сделали. Проверили при мне, показали, что всё держит

Repair: climate control equipment repair in

Сабина Г.Order No. ZK-2673 · 20 May 2023

ours

Проблема — не крутиться. Дамир М взялся за то, от чего другие отказались. Работает как раньше, придирок нет

Repair: climate control equipment repair in

Вероника П.Order No. TS-2203-953 · 19 November 2022

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Вернули в тот же день, всё функционирует!!

Repair: climate control equipment repair in

Вероника П.Order No. 63152 · 20 September 2022

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. После выходных обнаружил: не крутиться. Сказали 17 500, я согласился без торга. Приняли без очереди, оформили за пять минут. Мастер показал, что меняет: подшипник. В общем, доволен. Включил, проверил, работает

Repair: climate control equipment repair in

Руслан Д.Order No. 2022-8733 · 6 July 2022

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Вечером включил — и всё стало ясно: шумит. Приняли без очереди, оформили за пять минут. Разобрали, посмотрели: подшипник. Вышло дешевле нового, что логично. С чистой совестью советую. Работает даже тише, чем до поломки

Repair: climate control equipment repair in

Малик Т.Order No. ZK-2022/185 · 12 June 2022

ours

Проблема — не включается. Никита М перезвонил, когда всё было готово. Включил, проверил, работает.

Repair: climate control equipment repair in
Questions and answersQuestionsTECH SERVICE06

Questions about climate equipment repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can the control board of an air conditioning unit be repaired, or is it always replaced?

Often the board can be restored rather than replaced: much depends on the model and the type of damage. After diagnostics, the technician examines the unit and tells you what's more cost-effective — repair or replacement. We provide a 1-year warranty on labor and parts.

Is air conditioning equipment repaired on-site, or does it have to be taken to the service center?

Most breakdowns of air conditioning equipment are fixed at the customer's location, while complex components are repaired at the service center. The technician decides what to do after free diagnostics — it depends on the component and model.

How does repairing home air conditioning equipment differ from restoring a chiller?

A chiller is more complex: it has a large circuit and pump equipment, so both diagnostics and repairs are more extensive. Household air conditioning equipment has fewer components, and breakdowns are more often localized. The approach depends on the type and model.

What should I do if the air conditioning equipment stops working again after repair?

Contact the service center: a 1-year warranty covers the work performed and the parts. The technician will inspect the equipment again and identify the cause of the recurring breakdown. Diagnostics is free.

Can a heater be fixed if it turns on but doesn't heat?

Yes, usually the cause is the heating element, thermostat, or wiring, and it can be repaired. Diagnostics at your home will pinpoint the exact cause. The technician will agree with you on what to replace and what to repair before starting work.

Why isn't the heater heating, and what should I check first?

First, check if the outlet works, the cord is intact, and the safety thermostat hasn't tripped. If power is fine but there's no heat, the problem is likely in the heating element or control board — you need a technician.

Repair guideArticleTECH SERVICE07

Climate Control Equipment Repair in Almaty by Tech Service

Vladimir D., air conditioner service technician

Author: Vladimir D.,Air conditioner service technician

Published
Updated

Tech Service repairs climate control equipment in Almaty as a direct contractor: our technician arrives at your home within 60 minutes or we repair the equipment at our service center. Diagnostics are free, you get a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience.

Why climate control equipment needs repair and how breakdowns show up

Climate control equipment fails for several common reasons, and the symptom usually points to a group of components. Let's break down what each sign means.

Why an air conditioner stops cooling

If the air conditioner runs but doesn't cool, the most common culprits are refrigerant leaks, clogged filters, or compressor wear. Freon escapes through microcracks in soldered joints and circuit connections, and system pressure gradually drops — first the unit blows cool air, then almost room-temperature air. Filters clogged with dust restrict airflow through the heat exchanger, so cold doesn't reach the room even though the compressor is working fine. A worn compressor hums but doesn't create the needed pressure difference, and sometimes it starts only intermittently. Based on how the unit operates — blowing warm air steadily or intermittently — the technician narrows down the components before the visit, which is why diagnostics focus on circuit pressure and heat exchanger condition. Climate control equipment repair in Almaty starts with a pressure check: it separates a leak from a clog in a couple of minutes.

Why an air conditioner leaks and freezes up

Leaks are usually caused by a clogged drainage system or a misaligned unit, while freezing is due to low refrigerant or dirty filters. Dust, slime, and small debris accumulate in the drain, the tube clogs, and condensate overflows the drain pan directly onto the wall. An indoor unit misaligned during installation creates a tilt, and water runs down the casing instead of into the tube. Freezing occurs when the heat exchanger cools unevenly: with a refrigerant leak or clogged filters, the evaporator gets covered in frost and stops letting air through. Freezing and leaking often go together — a frozen heat exchanger melts and overflows the drain, so fixing just the dripping without checking the circuit is pointless. In my opinion, this is exactly the combination that city residents most often underestimate, replacing one part instead of finding the root cause.

What error codes, humming, and spontaneous shutdowns mean

  • Error code on the remote: points to a specific component — sensor, fan, or control board — but the interpretation depends on the model.
  • Constant humming: indicates a worn compressor or fan bearing, less often vibration from a loose mount.
  • Spontaneous shutdown: the unit goes into protection mode due to compressor overheating, a faulty temperature sensor, or a board malfunction.
  • Blinking indicators: a signal of communication failure between units or a control board error, which is checked against the model code.
  • Quiet click without startup: the relay or start capacitor isn't supplying power to the compressor, and the unit sits silent.
  • An error code is not a diagnosis but a pointer for inspection: the technician compares it with the actual behavior of the component, because the same code means different things on different models.

What your breakdown means and where the line is between DIY repair of climate control equipment and calling a technician

Some checks take the owner a couple of minutes, but there are signs where further attempts only make the breakdown worse and increase the cost of restoring the equipment.

What you can realistically check yourself before calling a technician

  • Power and circuit breaker: make sure the plug is in the socket and the breaker in the panel isn't tripped — some "won't turn on" cases are solved here.
  • Remote settings: check the cooling mode, target temperature, and battery charge — incorrect settings can mimic a breakdown.
  • Filter cleanliness: remove the front panels and rinse the mesh — filters clogged with dust cause weak airflow and freezing.
  • Error code: write down the combination from the display or indicators — the technician uses it to identify the likely component in advance.
  • Visible leaks: inspect the drain tube and pan — a clog is noticeable without tools, and an accurate symptom speeds up finding the cause during the visit.

When DIY is dangerous and you need a technician

If the issue is with the refrigerant, compressor, or control board, do-it-yourself intervention is dangerous for both the appliance and the person. Refrigerant is under pressure, and its leak in a closed room displaces air; an opened control board without de-energizing can damage expensive modules. The compressor is the most resource-intensive component of the circuit: attempts to "tweak" it or top up Freon without vacuuming the system end with replacing the unit. Refilling "by eye" without finding the leak gives a temporary effect — Freon escapes again through the leak, and the compressor works overloaded and wears out faster, so they first find the cause, then top up. A worn compressor, by the way, reveals itself with loud humming and body vibration — by this symptom, a technician often identifies the unit even before opening the blocks.

How a symptom helps narrow down the cause before the technician arrives

We ask you to describe the symptom over the phone so the field technician brings the right tools and immediately checks the likely unit. "Doesn't turn on at all," "turns on and shuts down after a minute," "blows but doesn't cool," "leaks from the indoor unit" — each wording leads to its own set of checks: power and control board, compressor protection, refrigerant leak, or clogged drain. Around the city, the technician arrives within 60 minutes, and an accurate description saves time on site. Our diagnostics are free, and the specialist quotes the cost of work after it — when the cause is already clear. The more precisely the symptom is described, the less time is spent on checks on site and the faster you get a clear recovery plan instead of guessing.

How repair works at home and in the service center

Most breakdowns are fixed on site, but some work requires the service center — let's break down how this is decided and what happens at each stage.

Which breakdowns are fixed at home and which in the service center

Type of breakdownWhere it's fixedSpecialist's actions
Leak, clogged drainAt homeCleans and checks condensate drainage
Electrics, sensorsAt homeChecks contacts and board
Refrigerant refillAt homeFinds the leak and tops up refrigerant
Compressor, boardMore often in the service centerRemoves the unit and replaces or restores it

How the technician's visit and on-site diagnostics work

Our specialist arrives within 60 minutes anywhere in the city, performs free diagnostics, and agrees on the work before starting. On site, they check the drainage system, contacts, sensors, and circuit pressure to separate a simple cause from one that requires removing a unit. The field technician brings tools for typical operations, so cleaning, sensor replacement, or leak detection is done without a trip to the service center. Agreeing before work starts is important for the customer — they see the cause and scope of work, rather than learning about them after the fact when the appliance is already disassembled. Ask for an explanation of the cause before disassembling the case: that way it's clear what you're paying for and which units are being touched. If the technician suggests replacing a unit right away, ask to see the test result — this keeps both them and you accountable.

How long the repair takes and what it depends on

The time of work depends on the unit — simple on-site operations take less than restoring a compressor or board in the service center. Drainage, sensor, and electrical operations fit into one visit, while the compressor and control board are removed, diagnosed, and reinstalled as a separate stage. The specialist gives the exact timeframe after diagnostics, because it's determined by the availability of the needed part and the complexity of the unit, not the type of appliance. Residents of Almaty new buildings with semi-industrial split systems should allow more time for removing heavy units than owners of household models. Ask what parts will be needed — the answer shows whether the work will fit into one visit. If the needed part isn't on hand, the technician will honestly say so in advance, and you decide whether to wait for delivery or limit to the current stage.

Which units are repaired and what is replaced

Every symptom points to a specific component — let's look at what breaks most often and when a part can be repaired versus replaced.

Compressor and refrigerant leak — what to check first

When an air conditioner stops cooling, the technician first looks for a refrigerant leak and only then assesses the compressor, because the symptoms are similar. The unit blows air but doesn't cool if there's less refrigerant in the circuit than normal: pressure on the gauges drops, the outdoor unit's heat exchanger gets covered in frost, and the compressor runs longer and heats up more than usual. The specialist inspects the flare connections, fittings, and tubing integrity, finds the leak, and only after fixing it measures the unit's current and pressure. Replacing the compressor without checking the circuit is a common mistake: if there's a leak, the new unit will quickly fail for the same reason. That's why we ask the technician to pressure-test the circuit first, and only then discuss replacing an expensive part.

Control board: repair or replace

The control board is more often replaced, but some faults — a broken contact, a burned-out component — the technician can fix on site. The module controls the air conditioner's operating modes: it turns the compressor and fan on and off, reads temperature sensor data, and executes commands from the remote. When an error code appears on the display and the buttons don't respond, the cause is usually in the traces, relays, or capacitors — they are tested and replaced individually. A completely burned-out module is easier to replace with a new one than to restore piece by piece. The decision depends on the nature of the damage: a local defect can be fixed, but a burned board is more cost-effective to replace than to solder again. In my opinion, board diagnostics should start with the temperature sensors — their readings are often mistaken for a module failure. In practice, there are also reverse cases: a working module is suspected for no reason when a ribbon connector has come loose or the terminals have oxidized.

Drainage, fan, and heat exchanger — typical jobs

  • Drainage system: we clean the pipe and drain pan of slime and debris, check the slope — a clog causes leaks into the room.
  • Indoor unit fan: we remove the impeller, clean the blades of dust, lubricate or replace the bearing if it hums.
  • Heat exchanger: we wash the fins of dust and grease, check the fins for bends — dirt reduces cooling capacity.
  • Filters: we wash or replace the mesh; if heavily clogged, we install new ones — they cost less than servicing the unit.
  • Mountings and vibration isolators: we tighten bolts and replace sagging mounts so the casing doesn't rattle during operation.

What types of climate control equipment we repair

Climate control equipment is not just household split systems. Cassette systems, gas boilers, and chillers have their own components, their own access to units, and their own failure patterns, so the approach to repair is different for each type.

Residential and semi-industrial air conditioners

Equipment typeCommon failureRepair specifics
Wall-mountedLeak, clogged filtersRepaired on site
CassetteDrainage, fanOften on site
DuctedBoard, sensorsAccess via hatch
Floor-standingCompressor, pumpUnit removed
IndustrialHeat exchanger, compressorPer site regulations

Gas boilers are also climate control equipment

We service gas boilers on-site as part of climate control equipment, because they are responsible for heating and hot water. A boiler combines three circuits: the gas section, hydraulics, and electronics — the control board, temperature and draft sensors, and the circulation pump. The technician checks ignition, circuit pressure, sensor operation, and the condition of the heat exchanger, not just whether the unit starts. In my experience, the automation is most often to blame: a sensor sends a wrong signal, and the boiler goes into lockout even though the burner and pump are working. A boiler requires checking not only the electrics but also the gas section, so the technician assesses the whole unit — otherwise, replacing the board won't fix the cause, and the error will return a few days after the first start.

How chiller repair differs from a household air conditioner

A chiller is an industrial cooling system, and its maintenance differs in the scale of components, load, and access to equipment. The compressor and heat exchanger here are many times larger than household ones, and the circuit serves several rooms of a facility at once, so a stop of one component stops cooling for the entire building. Diagnostics begins with circuit parameters — pressure, temperature difference, condition of pumps and shut-off valves — rather than searching for a household refrigerant leak in an indoor unit. Large chiller components are installed permanently and are not removed for inspection: the technician works on-site, taking readings from service ports and comparing them with the nameplate values of the specific model. Preventive maintenance is more important on a chiller: one faulty component affects the entire cooling system of the facility, so diagnostics are performed before an emergency shutdown, not after. Moreover, a scheduled inspection of components costs less than recovery after an accident with compressor replacement and facility downtime.

Diagnostics, warranty, and choosing a contractor

Before ordering, the owner needs to understand what they are paying for, what warranty they will receive, and how a direct contractor differs from an intermediary. Let's look at three things that determine trust in the work.

What free diagnostics includes

Free diagnostics is an inspection of the equipment, checking components, and identifying the cause of the breakdown before work is approved. Our technician comes to your home, opens the casing, checks filters, drainage, electrics, and circuit pressure, and then names the cause and scope of work. The specialist quotes the price after the inspection — before that, you pay nothing and are not obligated to agree to service. We record which components are in order and which require intervention, so the owner sees the full picture, not just a single line saying 'repair needed'. Diagnostics are needed not just to find the breakdown, but so the customer sees the cause and scope of work and makes an informed decision without pressure. This approach saves time for both parties: the client sees the cause and scope of work and makes an informed decision.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts, so a repeat breakdown caused by us is resolved under this warranty. The term covers both the work itself and the installed part — if the component fails again after a few months, we handle it, not you alone. This approach matters because a new part can also be defective, and the customer should not be left to deal with it alone. The warranty covers both the installed part and the work itself, so when you contact us, it's clear what it applies to. A warranty on parts separate from labor is what distinguishes a responsible service: you get not only the fixed fault but also confidence that the contractor is responsible for the result.

How a direct contractor differs from an aggregator and a private technician

Tech Service is a direct service provider with its own technicians, not an aggregator or a middleman, so the service itself is responsible for the work. Our specialist comes to your home or picks up the equipment for service, performs diagnostics and maintenance himself, and does not pass the request to a third party. When you order through an aggregator, you deal with a platform that only connects you with a contractor — and when something goes wrong, responsibility is blurred between multiple parties. With a private individual, the area of responsibility is limited to one person, and if the breakdown recurs, there may be no one to file a claim with. With a direct service provider, the technician and the warranty come from the same company, so there is someone to file a quality claim with. This is the main difference: unified responsibility for the result from diagnostics to warranty case.

Climate control equipment repair essentials

We've gathered in one place what determines the outcome of climate equipment servicing: which symptom diagnostics starts from, what you can check yourself, and which parameters to look at when choosing a service provider.

  • A symptom is a pointer for inspection. Won't turn on, won't cool, leaks, or shows a code — each sign narrows down the list of components before the casing is even opened.
  • The line between DIY and a technician. Power, filters, and settings can be checked without tools, while refrigerant and compressor work require equipment and certification.
  • The nature of the breakdown determines the service format. Simple issues are fixed on-site, complex components are taken apart at the service center.
  • Warranty matters more than speed. A year on labor and parts covers the risk of the same component failing again.
  • A direct service provider is fully accountable. Their own technician and a single point of responsibility — no back-and-forth between contractors.

44brands

Which climate equipment brands we repair in Almaty

We stock parts for every brand and have technicians with 4 to 20 years of experience.

We also repairWe also repairTECH SERVICE08

Besides climate equipment repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before climate equipment repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp