Original
Manufacturer part
- Selection
- By part number or oven model
- Compatibility
- Guaranteed for your model
- Delivery time
- Confirmed with the technician
- Cost
- After diagnostics
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 11 78Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We connect the oven to the power supply, fit it into the niche, and check the heating. A technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
freediagnostics
The technician removes the old oven, prepares the niche, connects the new one to the power supply, and checks its operation. The installation price is given after free diagnostics. A 1-year warranty applies to labor and parts.
01
Step 1quickly
We cut the power, pull the old oven out of the niche, disconnect the wires, and remove the fasteners.
02
Step 2quickly
We check the opening dimensions and ventilation gaps, and adjust the fasteners if needed.
03
Step 3quickly
We connect the oven terminals to the wiring, check the grounding and that the cable gauge is correct.
04
Step 4quickly
We place the oven in the opening, level it, and secure it with the cabinet's fasteners.
05
Step 5quickly
The technician turns on the heating and thermostat, checks the modes, and makes sure there are no errors after installation.
5
Installing or reinstalling an oven is needed in five typical situations: after buying a new appliance, when replacing an old one, after moving, and when the niche or wiring doesn't fit the new model.
New oven after purchase
The oven is unpacked but not connected to the power supply and not fitted into the cabinet niche.
Replacing the old with a new one
The old oven has reached the end of its life or broken down, and the new one needs to be installed in its place.
Moving to a new kitchen
At the new place, the oven needs to be connected to the wiring and fitted into the cabinet.
Niche doesn't fit the model
The opening depth or connection diagram doesn't match the parameters of the purchased oven.
Moving to another module
The oven needs to be moved to another cabinet module or a range replaced with a built-in model.
If you notice one of these signs, don't turn the oven on again — call a technician to check it.
Describe the symptomsInstallation may require fasteners, terminals, a seal, or a heating element.
Original
or
Analog
The table shows the cost of oven installation and repair in Almaty: a starting labor price without parts and the timeframe; the technician confirms the final amount before any repair work begins.
2 daystime
22 000 ₸cost

BeforeAfterThe home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Call or leave a request: the technician will check the model's compatibility with the niche and wiring before the visit and agree on a convenient time.

Warranty question? Call us
+7 (778) 021 11 787 898 reviews of repairs at TECH SERVICE in total
Жасмин Р.Order No. 2026-1686 · 7 August 2026
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Позвонил узнать про ремонт духовки. Проблема — не греет. Вышло дешевле нового, что логично. Заодно поменяли: тэн. Позвонили заранее, предупредили, что задержится на полчаса. Шум пропал, работает мягко)
Алексей Г.Order No. TS-2412-273 · 5 August 2024
oursСимптом был очевидный: не греет. Дамир М честно сказал, что менять, а что ещё походит. Сделали аккуратно, следов разборки не видно)
Роман З.Order No. 582123 · 5 January 2024
oursАлдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды. Алдын ала айтқан уақыттан ерте бітірді. Бағасын алдын ала келістік, соңында өзгерген жоқ. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Бағасы базардағыдан қымбат емес. Кәсіби мамандар, рақмет.
Гаухар Н.Order No. 2023-8447 · 2 July 2023
oursПроблема — не закрываеться. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Сделали и забыл про проблему
Марат Ж.Order No. 569526 · 8 May 2022
oursПозвонил в три места, здесь единственые назвали цену сразу. Сначала сомневался, мало ли что. С чем пришёл: не держит температуру. Шум пропал, работает мягко.
Гульмира С.Order No. 587992 · 17 February 2021
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Проблема — не греет. Пользуюсь ежедневно, вопросов нет.
Кристина Л.Order No. 44876 · 3 February 2021
oursСмотрел, у кого есть запчасти на такую модель. Работает даже тише, чем до поломки.
Руслан Д.Order No. 48916 · 7 June 2020
oursОсновная жалоба — не греет. Отдельно спосибо мастеру — Радик Т, терпения ему хватило. Выбирал между парой сервисов, Tech-service взял адекватностью. Внешне как новый, если не считать мелкой царапины.
Лилия В.Order No. 457477 · 3 June 2020
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Утром работало, днём сломалось, вечером я уже искал сервис. Симптом был очевидный: не закрывается. Ответили быстро, не пришлось ждать на линии. Вернули в тот же день, всё функционирует
Диана М.Order No. TS-4513 · 18 July 2018
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Включил, проверил, работает!!
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost models have a width and height close to standard, with slightly less depth; compact options are shorter. Before buying, check the dimensions against your cabinet opening so you don't have to modify the furniture.
There's no single best model: the choice depends on the power type, capacity, and the modes you need. For installation, what matters more is that the dimensions and connection method suit your kitchen and wiring.
It depends on the model's power: low-power models can use a regular outlet, while high-power ones need a dedicated grounded line. A technician will check the wiring and advise on the safest way to connect your specific oven.
Yes, grounding is mandatory: without it, the body could become live, which is dangerous. A technician will check the circuit and, if needed, suggest a safe connection option.
Installation includes connecting to the power supply, fitting into the cabinet opening, and testing the appliance. Modifying furniture for dimensions and running a new line are considered separate work, and the technician will discuss this on site.
After installation, the technician turns on all modes, checks heating, door operation, and that the body doesn't heat up. If the breaker doesn't trip and there's no smell or sparks, the installation was done correctly.
Tech Service provides at-home oven installation in Almaty: a technician arrives within 60 minutes, performs free diagnostics, connects the oven to the power supply, and builds it into the cabinet niche. We offer a 1-year warranty on labor and parts and accept payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies. The technician provides the price after free diagnostics.
Installation, connection, and built-in mounting are not the same thing, and the difference determines whether you need a technician at all. Let's break down where mechanical work ends and electrical work begins.
The full cycle includes power supply, building into the cabinet niche, and performance check, while connection covers only the electrical part, and built-in mounting covers only the mechanical part. A built-in model is held by the cabinet niche guides and receives power via a separate cable through the terminal block on the rear panel. The electrical part includes stripping the wires, connecting according to the diagram on the body, and checking grounding — without it, the body becomes live. The mechanical part requires even gaps for ventilation: hot air escapes upward, and without gaps the body overheats and the furniture darkens. If the cabinet is already prepared and the socket is in place, the technician still checks ventilation gaps and grounding — these two parameters are most often violated during DIY work.
We explain what power line an oven needs, why grounding is necessary, and how an electric model differs from a gas one during installation.
We connect the oven to a grounded line, and whether a dedicated branch and circuit breaker are needed is determined by the technician based on the model's power and wiring condition during free diagnostics. A standard household socket is designed for limited current, while heating elements in grill and convection modes draw significantly more, especially when the oven heats up to 250 degrees. The input circuit breaker protects the cable from overheating, and its rating is checked against the wire cross-section: a thin wire under heavy load melts before the protection trips. The grounding circuit removes potential from the body if the heating element insulation breaks down — without it, touching the metal panel is dangerous. Even when the appliance is plugged into a regular socket, prolonged operation at high temperature causes weak wiring to heat up, and this is the first thing our specialist checks before connection.
| Parameter | Electric oven | Gas oven |
|---|---|---|
| Connection | Grounded line | Gas main |
| Who performs | Appliance technician | Gas service specialists |
| Key risk | Overheating of weak wiring | Gas leak |
| Grounding | Required | Not applicable |
We look at situations where an oven won't fit into a cabinet niche, the furniture was made for a different model, or you need to replace an old appliance with a new one. We show which mismatches can be solved on site and when you can't avoid modifying the cabinet.
We help when the appliance dimensions and the niche don't match: a technician assesses on site whether the opening can be modified or a different model is needed. Built-in appliances are designed for a standard width of 60 cm, but height varies from 45 to 60 cm across models, and depth can reach 55 cm — so a cabinet assembled for one appliance often won't accept another. The technician compares the body dimensions with the niche's specified dimensions, checks the gaps on the sides and top, and assesses whether the new fit blocks ventilation channels. A difference of a couple of centimeters is often solved by adjusting the niche rather than replacing the appliance — but only if ventilation and heat dissipation gaps are not compromised. If trimming a shelf or side panel eats into the convection gap, it's more honest to choose a model that fits the existing opening.
We install a new appliance into a cabinet made for a different model if the opening and ventilation allow it, and we remove the old one before installing the new one. During such a replacement, the technician removes the old appliance, clears the niche of fasteners and grease, then compares the opening with the new body's dimensions in width, height, and depth. Depth matters more than it seems: it differs across models, and an appliance that's too deep hits the back wall of the cabinet, so the door won't close and the body sits unevenly. At the same time, heat dissipation gaps and the position of ventilation openings are checked — with a tight fit, the appliance overheats and wears out faster. A Tech Service technician handles the removal of the old appliance and furniture adjustment on site, and after installation checks that the appliance is level and the door moves freely.
We show the path from request to performance check: what the specialist does from arrival to final switch-on. You'll know in advance what steps the process consists of, where your help is needed, and what to look at during acceptance.
A Tech Service specialist comes to your home, performs free diagnostics, connects the appliance to the power supply, builds it into the niche, and checks operation after installation. First, they inspect the site, compare dimensions with the niche, and test the power line under load. Then they connect the appliance, secure the body in the cabinet, level it, and run a test heating. Oven installation in Almaty follows the same order: from niche inspection to test switch-on. Duration depends on the model and the condition of the niche, so the exact time is given after inspection, not over the phone. The post-installation check includes heating in several modes — this shows that the appliance holds temperature and doesn't shut off under load. At acceptance, ask to see the test heating: this step confirms that connection and installation are fully completed.
A Tech Service specialist brings their own tools for installation and connection, while fasteners for a specific model are discussed when you place the request. A city visit takes up to 60 minutes, so they carry tools and consumables with them rather than returning to the warehouse for them. For built-in appliances, you need a level, a screwdriver, a set of bits and keys for the body screws. Fasteners depend on the model: some bodies have their own screws and brackets, while others are fine with the standard screws from the kit. If fasteners come with the appliance, it's best not to lose them during unpacking — some models are secured with special screws that aren't in a standard set. Before the visit, check the instructions: having the standard screws saves time on installation.
When choosing a technician, three things matter: who exactly will come, how quickly, and what happens with the work afterward. Let's look at how direct service differs from an aggregator and a private individual.
Tech Service is a direct provider: our technician comes to you, not a middleman from an aggregator, and we cover the whole city. Our technicians work with ovens from 4 to 20 years old, so they diagnose the issue on site instead of taking the appliance off to who knows where. When you book through an aggregator, you pay a markup for forwarding the request, and you only see the contractor on the day of the visit — many intermediary services in Almaty work this way. The price of oven installation depends on who does it: an intermediary builds the markup for forwarding the request into the total, while with a direct provider you pay only for the work itself. We take the request and handle it ourselves: diagnostics are free, and the same person who diagnoses also installs the oven. With an intermediary, there is no direct contact between you and the technician — warranty issues have to be resolved through the aggregator, not with the person who did the work.
To sum up: the result of oven installation depends on three things — the condition of the wiring, the geometry of the niche, and the technician's qualifications. Below are the key points to keep in mind before starting work.

If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read