Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a gas boiler

Gas Boiler Installation in Almaty

Boiler installation with free diagnostics: a technician will arrive within 60 minutes anywhere in the city and provide an estimate after inspection.

  • Removal of the old boiler
  • Connection to gas, water, and heating
  • Setting up the automation and checking draft

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database

1 yearwarranty on labor and parts

60 minutestechnician visit anywhere in the city

freediagnostics before installation

What the job includesIncludesTECH SERVICE02

What gas boiler installation includes in Almaty

Gas boiler installation is done step by step: preparing the space, connecting to utilities, installing the flue, setting up the automation, and testing operation. The cost of work is determined after free diagnostics.

Signs of a faultSigns of a faultTECH SERVICE03

When gas boiler installation is needed in Almaty

5

The service is ordered when buying a new boiler, moving to another home, or replacing worn-out equipment. The technician installs it in a prepared location, connects the boiler to the gas network, water supply, and electrical grid, configures its operation, and checks the heating and hot water system.

  1. Buying a new boiler

    After purchasing the equipment, the technician installs the boiler in a prepared location and connects it to the utilities.

  2. Replacing an old boiler

    When the previous equipment is worn out, the technician removes it and installs a new boiler with connection to the system.

  3. Moving to a new home

    When changing apartments or houses, the technician installs the boiler in the new location and sets up heating and hot water operation.

  4. Relocating to another place

    If the boiler needs to be moved within the premises, the technician disconnects it, relocates it, and reconnects it to the utilities.

  5. Built-in furniture installation

    When installing the boiler in a cabinet or niche, the technician places the equipment with consideration for ventilation and access to the utilities.

Before calling a technician, write down the error codes and shutdown dates — this will speed up the assessment of the boiler's condition.

Describe the symptoms
Parts and materialsPartsTECH SERVICE04

Parts and materials for gas boiler installation in Almaty

Parts compatible with the boiler model are installed. Original and aftermarket parts differ in price and availability; selection is by model or part number.

Original

Manufacturer parts

Compatibility
Full compliance with the boiler model
Warranty
1 year on labor and parts
Selection
By model or part number
Lead time
Depends on supplier availability

Aftermarket

Compatible parts

Compatibility
Checked against the boiler model
Warranty
1 year on labor and parts
Selection
By part number or model
Price
Usually lower than original
PricesPricesTECH SERVICE05

How much gas boiler installation costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Wall-mounted gas boiler installationmaterials separate

2–4 hours

from20 000 ₸

Floor-standing gas boiler installationmaterials separate

2–4 hours

from27 500 ₸

Boiler replacement: old removal and new installationmaterials separate

1 day

from24 000 ₸

Initial start-up and automation setupexact price — after the free diagnostics

1–2 hours

from9 000 ₸

Boiler connection to heating system (piping)materials separate

2–4 hours

from12 000 ₸

Work before and afterBefore and afterTECH SERVICE06

Before and after gas boiler installation in Almaty

Gas valve coil burned out

4–8 hourstime

from 7,000 ₸cost

Problem
The boiler would not ignite: ignition triggered, but gas did not reach the burner, and an error appeared after several attempts.
What we did
The technician shut off the gas, replaced the gas valve, checked the connections for tightness, and adjusted the gas pressure.
Result
The boiler ignites, gas reaches the burner, and the connections are tight.
I want the same
Ariston gas boiler: gas valve coil burned out — after repairBeforeAfter
01 / 01
All repairs
TechniciansTechniciansTECH SERVICE07

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a gas boiler at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book gas boiler installation in Almaty

Schedule a gas boiler installation: the technician will agree on a time, bring fasteners and consumables, install the boiler, and connect it to utilities.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE08

Reviews of gas boiler installation in Almaty

Эльмира Т.Order No. TS-3700 · 31 October 2025

ours

Симптом был очевидный: не зажигаеться. Проверили при мне, показали, что всё держит.

Repair: gas boiler repair in

Александра Н.Order No. ZK-2025/532 · 2 September 2025

ours

Құрылғы ескі болғандықтан, бөлшек табыла ма деп қорықтым. Күтуге уақытым жоқ еді, сол күні алып кеттім)

Repair: gas boiler repair in

Айгуль К.Order No. TS-3515 · 6 September 2024

ours

Пробовал найти мастера в своём районе, но все были заняты. Сдал в ремонт: газовая колонка. Повод для визита: не зажигается. Нагрев в норме, посторонних звуков нет.

Repair: gas boiler repair in

Айгуль К.Order No. TS-1267 · 15 July 2023

ours

Жалоба простая: не греет. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Проверили при мне, показали, что всё держит.

Repair: gas boiler repair in

Ержан А.Order No. 34055 · 18 May 2023

ours

Позвонил в три места, здесь единственые назвали цену сразу. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Бакыт Ж.Order No. TS-2209-675 · 27 December 2022

ours

Смотрел, у кого есть запчасти на такую модель. Разобрали, посмотрели: плата. Сделали аккуратно, следов разборки не видно)

Repair: gas boiler repair in

Ержан А.Order No. 14877 · 22 August 2021

ours

Симптом был очевидный: не греет. Никита М приехал в тот же день, хотя был конец смены. Работает даже тише, чем до поломки.

Repair: gas boiler repair in

Виктор Ф.Order No. 2020-4309 · 31 May 2020

ours

Симптом был очевидный: течёт. Отдельно спосибо мастеру — Никита М, терпения ему хватило. Пользуюсь ежедневно, вопросов нет.

Repair: gas boiler repair in

Станислав К.Order No. TS-2176 · 8 March 2020

ours

Первое, что заметил: не греет. Никита М всё объяснил и не пытался впарить лишнее. Техсервис в Алматы, если что, вот их адрес — не пожалел. Работает как раньше, придирок нет

Repair: gas boiler repair in

Максим Ю.Order No. 58907 · 7 March 2019

ours

Пробовал найти мастера в своём районе, но все были заняты. Повод для визита: не зажигается. Гудит ровно, не греется, всё как надо

Repair: gas boiler repair in
See all reviews
Questions and answersQuestionsTECH SERVICE09

Questions about gas boiler installation in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What are the requirements for installing a gas boiler in a private home in Kazakhstan?

The boiler is placed in a separate non-residential room with a window, supply ventilation, and exhaust, and the flue is routed above the roof. Gas connection is performed by a specialist with a permit, and the installation must comply with the home's gasification project.

What are the requirements for gas boiler installation?

The boiler is mounted on a non-combustible wall with a service clearance, and the flue and ventilation are done according to the standards for the specific model. The gas part is connected by a technician with a permit, after which commissioning and leak testing are carried out.

What does the technician's work include when installing a boiler?

In addition to connecting to gas, water, and electricity, the technician performs commissioning: sets the pressure, checks draft and ignition, and adjusts the modes. After that, the boiler is started in operating mode and checked for leaks.

How do you know if you need a gas boiler installation rather than repairing an old one?

If the boiler has already been repaired multiple times, often goes into error, makes noise, or leaks from the body, replacing it is more cost-effective than continuing to repair it. Installation is discussed when the unit is worn out or doesn't match the home's power needs.

Can you install a gas boiler yourself?

You can prepare the room and run water and electricity yourself, but the gas part cannot be connected without a permit. Installation and commissioning are entrusted to a technician, otherwise leaks and problems with approval from the gas service are possible.

Do you need to replace the gas pipe and meter when installing a new boiler?

Usually the pipe and meter are left if their capacity is sufficient for the new boiler. Replacement is done when the old components are worn out or not rated for the new power, and this is coordinated with the gas service.

Repair guideArticleTECH SERVICE10

Gas boiler installation in Almaty by Tech Service

Author: TECH SERVICE editorial team

Published
Updated

Tech Service installs gas boilers in Almaty as a direct contractor with its own technicians. A technician arrives at your home within 60 minutes, inspects the site and performs free diagnostics, then installs the boiler, connects it and carries out commissioning. We provide a 1-year warranty on labor and parts.

When you need installation, and when repair or replacement

The first question a homeowner asks is whether to repair the existing boiler or install a new one. We explain the signs that indicate it's time to replace the unit, and when repair is still justified.

Signs that the old boiler needs replacing, not repairing

  • Repeated control system failures: if the control board or safety sensors fail for the second time in a season, repair turns into a cycle.
  • Heat exchanger corrosion: pinholes, scale marks and microcracks on the heat exchanger cannot be reliably restored — the unit is replaced entirely.
  • Burner wear: the flame turns yellow and soot appears on the heat exchanger — the burner has reached the end of its service life and needs replacement.
  • Shut-off valves no longer hold: valves and taps on the piping stop shutting off gas and water, and compatible parts are no longer available for the model.
  • Repair costs more than the unit: if the same component is replaced for the third winter, money goes into a cycle rather than a result — replacing the boiler is cheaper in the long run.

How installation differs in a new vs. old building, and whether you can install in winter

In a new building, we more often install a boiler from scratch to fit the existing piping, while in an old building we first check the gas main, meter and flue — the installation scheme depends on their condition. In apartments and private houses, Tech Service installs boilers with shut-off valve piping and flue connection, and turnkey installation includes commissioning of the circuit. Gas boiler installation in Almaty in a new development and in an older house differs in the amount of preparatory work, and the technician quotes the price after free diagnostics. We perform diagnostics before work free of charge, the technician arrives within 60 minutes within the city, and the warranty is 1 year on labor and parts. Installation is not prohibited in winter, but at sub-zero temperatures it's important to start the heating system immediately to avoid freezing the circuit after connection: in summer there is time between piping and first firing, while in frost this gap is minimized.

How turnkey installation works

Turnkey installation is not just connecting to the main. We break down the steps from the specialist's visit to commissioning and explain what exactly is included in the work.

Installation steps from inspection to commissioning

We carry out gas boiler installation in Almaty step by step: visit and site inspection, free diagnostics, power selection, installation and connection to the gas main, commissioning with control system checks. During the inspection, the specialist assesses the room, flue and connection point — this determines the piping scheme and the set of parts. Diagnostics are free, so weak points are visible before work begins, not after the first start. Power selection is based on the house area and number of circuits: you need a reserve for heating and hot water, but not double. Then installation and connection to the main, followed by commissioning. Commissioning is a separate step, not a formality: without checking the control system and safety sensors, the unit may start but operate unsafely.

How long installation takes and what to do if the boiler shows an error after installation

A technician arrives within 60 minutes anywhere in the city, and installing a wall-mounted boiler from scratch takes longer than a replacement — the exact time is given after inspecting the site. The duration depends on the length of the pipe run, the number of bends, and the readiness of the flue: in a new building the layout is simpler, while in an old one additional rework of the connection is needed. Commissioning and automation checks are performed in your presence so you can see how the burner responds to commands. If an error appears on the display after installation, don't reset it yourself — the code shows at which stage of commissioning a parameter was missed. Note the code and call us: that way the cause is found faster than by repeated blind restarts. The 1-year warranty on labor and parts covers installation and commissioning. Gas boiler installation has no hidden costs: the technician gives the price after free diagnostics.

Room requirements and coordination with the gas service

Legal installation starts not with buying a boiler but with checking the room and documents. Here's what to check before installation, which parameters are critical, and what needs to be coordinated with the gas service.

Requirements for the room, ventilation, and flue

The boiler room must have an air supply for combustion, sufficient volume, and a properly routed flue — a wall-mounted unit usually needs a coaxial flue, while a floor-standing one needs a separate vertical channel. The air supply is calculated based on burner power: without a constant draft, the flame burns unstably and combustion products are not fully removed. A coaxial design is routed horizontally through the wall, while a separate channel goes through the roof, and its cross-section is selected for the specific model. The flue is checked for draft before installation, not after: weak draft throws the boiler into an error on the first start, and rework costs more. Gas boiler installation and repair begin with this check — it determines whether the room is suitable for the chosen model. In my opinion, draft and ventilation should be measured at the model selection stage — that makes it easier to choose the flue type without rework.

Permits, gasification project, and meter replacement

Installation is coordinated with the gas service, and a gasification project is prepared if necessary; replacing the gas pipe and meter is not always required — it depends on the condition of the main line and the requirements for the new boiler. We help assemble the package and go through coordination: we check the condition of the main line, compare the connection diagram with the room regulations, and advise whether a project is needed for the chosen model. Meter replacement is required if its capacity is not sufficient for the new boiler or the verification period has expired — otherwise the main line is left as is. It's better to start coordination before buying the boiler: some models and connection diagrams have different document requirements, and this affects the choice. Our technicians handle such coordination regularly and know which documents the service will request for a specific diagram.

Which boiler to choose for your home

The choice of boiler determines the installation scheme, piping, and future gas consumption. Here's how to match thermal power to the home's area and how a wall-mounted option differs from a floor-standing one.

How to match power to the home's area

We select the boiler's thermal power based on the heated area and the home's heat losses, not on the principle of 'the more, the better' — for a home of 100-150 sq.m, they rely on a basic calculation and refine it during the inspection. The calculation takes into account wall material, glazing, ceiling insulation, and ceiling height: a brick house with wooden windows loses heat noticeably faster than an aerated concrete one with double-glazed windows. During the inspection, the technician verifies these parameters and checks whether the burner can handle the load during peak frosts. An oversized reserve leads to cycling — the unit turns on and off frequently, which increases wear on the burner, heat exchanger, and automation with safety sensors. In my opinion, an accurate calculation for a specific home is more important than a reserve 'just in case': it extends the life of components and stabilizes the temperature in the rooms. Gas boiler installation price depends on power and piping scheme, so the technician gives the final amount after free diagnostics.

Wall-mounted or floor-standing boiler, and can it be installed in an apartment

ParameterWall-mountedFloor-standing
Placementon the wallon the floor
Fluecoaxial, through the wallseparate, vertical
Boiler room areacompactrequires a separate room
Heat exchangersteel, compactcast iron, heavy

Warranty, technician visit, and how to book

When booking, the contractor's responsibility and response time matter more than advertising. Here's exactly what our warranty covers and how a technician visit works.

What the installation warranty covers

What the installation warranty covers We provide a 1-year warranty on labor and parts — it covers the installation, connection, and commissioning performed by our technician. During this period, we fix defects caused by our work: flame failure due to incorrect settings, leaks at piping connections, and errors in connecting safety sensors and automation. The warranty applies specifically to the work and components used by our technician, so it's important to keep the completed work report and equipment documents — this will speed up the review of your request. If a defect appears, don't try to fix it yourself and don't hire third-party technicians: such interventions may be grounds for denial. Practical tip — if you notice flame failure, leaks at piping connections, or faults in safety sensors and automation, document the situation immediately and call our technician so we can fix the cause under warranty.

How to call a technician and what affects the cost

  • Request: you describe the task, we confirm the boiler model and address, then schedule a visit time.
  • Visit: the technician arrives within 60 minutes anywhere in the city.
  • Diagnostics: inspection is free; we check the gas line, flue, and boiler placement area.
  • Quote: the price for gas boiler installation is given after the inspection, not over the phone.
  • Payment: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer.

Why professional gas boiler installation matters

We've covered the key factors that determine the installation outcome: from the right decision to repair or replace, to choosing a contractor with a warranty and fast response.

  • Repair vs. replacement: if an old boiler requires frequent investments and parts, installing a new model is more cost-effective than repeated repairs.
  • Turnkey stages: inspection, design, installation, connection to gas and water, commissioning — each stage affects safety and stable operation.
  • Room and permits: ventilation, flue, and gas service approvals are checked before work begins, not after.
  • Equipment selection: capacity is calculated based on area and heat loss, and wall-mounted or floor-standing type is chosen for the specific room.
  • Warranty and visit: a 1-year warranty on labor and parts plus technician arrival within 60 minutes across the city — clear criteria when choosing a contractor.
Other servicesOther servicesTECH SERVICE11

Other services besides gas boiler installation in Almaty

If you ask, the technician will check other parts during the same visit.

BlogBlogTECH SERVICE12

Worth reading before gas boiler installation in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp