Factory part
Original
- Selection
- by part number and boiler model
- Compatibility
- exactly matches the factory part
- Delivery time
- depends on supplier availability
- Price
- higher, quoted after diagnostics
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 046 88 53Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Maintenance, cleaning, and repair of gas boilers at your home. Free diagnostics, and a technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




60 minutestechnician arrival anywhere in the city
1 yearwarranty on labor and parts
4–20 yearstechnician experience
Maintenance means scheduled cleaning and checking of the boiler components, not just fixing a breakdown. The technician cleans soot and carbon deposits from the heat exchanger and burner, checks the connections for leaks, and tests the controls. The cost of work is quoted after free diagnostics.
01
Step 1depending on boiler condition
Carbon deposits and soot are removed from the heat exchanger surface so heat transfers to the water without loss.
02
Step 2depending on boiler condition
The nozzles and combustion chamber are cleaned, and the flame is checked for even distribution across the burner.
03
Step 3depending on boiler condition
Gas and water joints are inspected, and connections are checked for tightness and leaks.
04
Step 4depending on boiler condition
Sensors, ignition, and safety functions are tested, and readings are compared with the boiler's data plate.
05
Step 5depending on boiler condition
Gas and air supply are adjusted so the flame is even and stable in all modes.
6
Owners notice six typical symptoms themselves: the boiler won't start, pressure drops, noise appears, an error shows on the display, there's a leak under the boiler, or the flame is yellow instead of blue. The technician identifies the cause of each during diagnostics.
Boiler won't start
Most often the cause is ignition, the flame sensor, or gas supply. Less often it's the control board or a fuse.
Pressure drops
A leak in the heating circuit, air in the system, or a faulty expansion tank. Joints and top-up are checked.
Noise during operation
Scale in the heat exchanger, air in the circuit, or pump wear. The type of noise points to the component.
Error on the display
The code points to a specific component: ignition, draft, sensor, or circulation. The meaning is checked against the manual.
Leak under the boiler
Loose connections, gaskets, or wear of the tank and pump. The source is found by the location of the leak.
The boiler often goes into a draft error or shuts down after heating — this points to flue or overheating problems.
Describe the symptomsThe part is selected by boiler model and revision, matching the number from the nameplate or manual. Compatibility is checked before ordering.
Factory part
or
Compatible option
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 7 000 ₸cost

BeforeAfterThe home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Leave a request — the technician will confirm the visit and ask for your boiler model by phone so they can bring the right parts.

Warranty question? Call us
+7 (778) 046 88 537 898 reviews of repairs at TECH SERVICE in total
Богдан С.Order No. 938445 · 24 March 2026
oursДруг посоветовал, у него похожая история была. Нужен был ремонт газовой колонки — обратился сюда. Проблема — не зажигается. Поставили новую деталь: мембрана. По цене не скажу, что дёшево, но справедливо. Заявку приняли по телефону, перезвонили через десять минут. Вернули в тот же день, всё функционирует.
Ольга М.Order No. 2024-2927 · 9 September 2024
oursОсновная жалоба — не греет воду. Никита М помог выбрать, без навязывания. Сказать, что доволен — ничего не сказать
Айгуль К.Order No. TS-1267 · 15 July 2023
oursЖалоба простая: не греет. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Проверили при мне, показали, что всё держит.
Ерасыл Б.Order No. TS-2202-231 · 2 April 2022
oursСимптом был очевидный: не зажигаеться. Никита М приехал в тот же день, хотя был конец смены. Уже полгода — ни одного сбоя.
Жасмин Р.Order No. 13909 · 18 December 2019
oursСмотрел, у кого есть запчасти на такую модель. Не люблю сервисы, но этот запомнил. Симптом был очевидный: не зажигается. Отдельно спосибо мастеру — Дамир М, терпения ему хватило. Нужна была замена: теплообменник. Уже полгода — ни одного сбоя.
Алмас Д.Order No. TS-1908-726 · 14 November 2019
oursСимптом был очевидный: ошибка. Дамир М помог выбрать, без навязывания. Пользуюсь ежедневно, вопросов нет
Максим Ю.Order No. 58907 · 7 March 2019
oursПробовал найти мастера в своём районе, но все были заняты. Повод для визита: не зажигается. Гудит ровно, не греется, всё как надо
Дмитрий Л.Order No. ZK-5171 · 21 July 2018
oursХотел сначала вызвать мастера на дом, потом передумал. Больше всего напрягало: ошибка. Сделали аккуратно, следов разборки не видно.
Дмитрий Л.Order No. ZK-2017/954 · 2 December 2017
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Первое, что заметил: не зажигаеться. Пользуюсь ежедневно, вопросов нет.
Руслан Д.Order No. 2017-6867 · 24 April 2017
oursПроблема — течёт. Никита М помог выбрать, без навязывания. Проверил дома — всё на месте, ничего не забыли.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionThe work is done by a service company technician licensed to work with gas equipment. At Tech Service, this is a staff specialist: they come to your home themselves and don't pass the request to middlemen.
The technician comes to your home, runs free diagnostics on the boiler, then cleans the burner and combustion chamber, and checks the connections and sensors. At the end, they start the boiler and make sure it runs without errors.
The danger comes from gas buildup due to faulty automation, a clogged burner, or blocked flue draft. Regular maintenance and draft checks reduce this risk, depending on the model.
Yes, for a working boiler, daily shutdown is not dangerous, but frequent cycles put extra stress on the components. If the boiler starts shutting down on its own more often, it's worth having it checked during maintenance.
If the boiler works but heats worse, it usually needs preventive service: cleaning components and adjusting settings without replacing parts. Repair comes in when diagnostics show a faulty component, and the technician gives you the price after a free check.
Check whether the company's own technician comes to you, not an aggregator's dispatcher, and whether there's a warranty on the work. Tech Service is a direct provider: our own specialist and a 1-year warranty on labor and parts.
Tech Service provides gas boiler maintenance in Almaty with its own technicians with 7 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and there's a 1-year warranty on labor and parts. We work with wall-mounted and floor-standing boilers from Bosch, Vaillant, Ariston, Baxi, Navien, Protherm.
Maintenance is scheduled preventive service according to the regulations, while repair is fixing a breakdown that has already happened. Let's look at how to tell one from the other by the boiler's behavior and when it's time to call a technician.
Maintenance is a scheduled procedure for the components that prevents breakdowns, while repair is fixing a malfunction that has already occurred. During scheduled maintenance, the technician disassembles the burner, checks the automation and sensors, flushes the heat exchanger to remove scale and soot, cleans the flue, and sets the gas pressure using a manometer. Gas boiler repair begins when a part has already failed: the heat exchanger is punctured, the three-way valve is stuck, the control board is burned out, or the circulation pump has failed. Repair and maintenance of gas boilers complement each other: preventive maintenance reduces the likelihood of accidents, and repair gets the equipment back up and running when a breakdown has already happened. A scheduled check before the heating season reduces the risk of an emergency shutdown and unplanned replacement of a component. If the boiler works but heats worse, makes noise, and the flame has lost its even blue color, most often what's needed is preventive maintenance with flushing of the heat exchanger, not replacement of parts. Regular scheduled checks help to notice component wear in time and avoid a sudden heating shutdown. Preventive maintenance of gas boilers in Almaty follows the same regulations and extends the service life of the equipment.
The maintenance regulations cover the heat exchanger, burner, automation, flue, and safety system. Here's the scope of work by component and the frequency, adjusted for local water.
| Component | What we do | What we look at |
|---|---|---|
| Heat exchanger | Flush to remove scale | Scale, reduced heat transfer |
| Burner | Clean and adjust | Flame uniformity |
| Automation and sensors | Test and read codes | Malfunctions, errors on the display |
| Circulation pump | Assess operation | Noise, pressure drop |
| Expansion tank | Measure pressure | Deviation from the norm |
| Flue | Check draft | Clogging, back draft |
| Safety system | Test sensors | Gas leak, draft |
We recommend scheduled gas boiler maintenance once a year before the heating season, and more frequent heat exchanger flushing if your water is hard. The harder the water, the more often flushing is needed — that's exactly what local regulations are based on. Gas boiler maintenance in Almaty should be planned with local water in mind: during a service visit, our technician reads the automation data, checks the expansion tank pressure, and measures draft — these readings show how far the boiler has drifted from factory settings over the season. Hard water in the city supply speeds up scale buildup in the heat exchanger: a layer just fractions of a millimeter thick reduces heat transfer and makes the burner run longer on every cycle. If the boiler works hard in winter, shorten the interval between flushes — once a year for scheduled service and more often if your tap water is noticeably hard. A cold water inlet filter helps slow scale growth: it doesn't remove deposits completely but noticeably reduces their formation.
A visit follows clear steps: arrival and free diagnostics, then work on the components and a check of the result. Let's walk through each stage so you know exactly what happens to your equipment.
Diagnostics are free: a specialist inspects the unit, reads the error code on the display, checks pressure with a gauge and flue draft, then determines whether maintenance or repair is needed. The inspection starts with the external condition of the heat exchanger, burner, and connections — soot and condensation show how long it's been since the unit was cleaned. Pressure in the circuit is measured separately and draft is checked, because backdraft in the flue often causes false errors on the control board. Based on the diagnostics, the technician quotes the price, and the owner decides whether to book the service or postpone it. The technician reports any error codes found before work begins — so you can see exactly what was found, not just hear a general conclusion. If the inspection shows that gas boiler service in Almaty is needed, the technician will immediately tell you which components require attention and to what extent.
Gas equipment requires certification and experience: a mistake in combustion setup costs more than any service. Below — about the warranty, technician qualifications, and the risks of cleaning it yourself.
We provide a 1-year warranty on labor and parts. A specialist arrives, checks the components, and only then quotes the scope of work. The warranty covers both the work performed and the parts installed — these are two separate commitments, and both are valid for one year. Our team's technicians have from 4 to 20 years of experience with gas equipment. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. A parts warranty separate from labor matters because if a component fails again, the owner doesn't pay twice for the same repair: the part and its installation are covered by the warranty obligation, not a new invoice. If you need a reliable gas boiler service center in Almaty, the 1-year warranty applies to both labor and parts.
Cleaning a gas boiler yourself is dangerous: without proper certification and tools, it's easy to disrupt the combustion settings and safety system. The burner, heat exchanger, and sensors are all part of one circuit, and disassembling any component changes how the others operate. A gas equipment technician checks gas pressure and draft after cleaning, and these parameters can't be seen without special tools. Even careful disassembly of the burner without subsequent adjustment throws off the combustion mode, and the boiler starts running unstably — with pops, incomplete combustion, and increased fuel consumption. After a DIY cleaning, it's usually the disrupted settings that need correcting, not mechanical breakdowns. Calling a certified technician is more reliable than dealing with the consequences of such disassembly: re-adjusting the unit requires proper tuning.
The market includes both aggregators and intermediaries who pass requests to third parties. Let's look at how to tell a direct provider apart and list the equipment we work with.
We are a direct provider: our own technician comes to you, not a contractor from a forwarded request, and the same service that provides the warranty does the work. Our specialists arrive at your home within 60 minutes anywhere in the city, diagnose for free, and determine whether maintenance or repair is needed. Gas boiler service in Almaty is performed by our staff technician, so your request isn't sent elsewhere. The warranty is 1 year on labor and parts, issued by our service, not a third-party organization. The gas equipment technician is personally responsible for the result. With an intermediary, the warranty is provided by a third party, so if the problem recurs, it's harder to make a claim — with a direct provider, there's a single point of responsibility, and someone to hold accountable: the same service that gave the warranty. Ask the dispatcher who exactly will come and who provides the warranty: if the answer is vague, you're dealing with a request reseller.
Here's a quick summary for gas appliance owners: what to make a habit before cold weather and which signals mean it's time to call a specialist.
If you ask, the technician will check other parts during the same visit.
Other large appliances