experience10 yearsMaksim S.
Graphics card repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are common symptoms and likely causes. The technician will pinpoint the exact cause after diagnostics.
Dead battery, oxidized contacts
from4 000 ₸
Memory card error, damaged ribbon cable
from9 000 ₸
Dirty lenses, worn zoom motor
from13 500 ₸
Damaged ribbon cable, cracked screen
from8 500 ₸
Worn contacts, damaged slot
from9 000 ₸
Worn battery, current leak
from4 000 ₸
Clogged fan, dried thermal paste
from7 000 ₸
Impact, drop, water damage
from3 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
5 steps

From request to checkup — five steps, free diagnostics.
Submit a request, and the technician will clarify the symptoms and prepare for the visit.
The technician will arrive anywhere in the city within 60 minutes after confirmation.
The technician confirms the address and a convenient time slot to avoid rescheduling.
The technician notes your complaints and shooting conditions to reproduce the issue.
Remove extra accessories from the device and back up files from the memory card.
The computer and laptop repair department in Almaty has 7 technicians with 6 to 15 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsGraphics card repair technician
experience6 yearsPC and laptop diagnostics technician
experience8 yearsLaptop repair engineer
experience10 yearsSoftware installation specialist
experience7 yearsPC and laptop repair technician
experience13 yearsDiagnostics and virus removal specialist
experience15 yearsConsultant
We reply during working hours
Request video camera repair in the way that suits you — the technician will confirm the time and clarify the symptoms.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Фарида К.Order No. 12881 · 16 October 2026
oursБұрын басқа сервиске барғанмын, бірақ бұл жолы осында келдім. Алдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды.
Индира П.Order No. 877701 · 11 October 2026
oursПовод для визита: разбит экран. Дамир М объяснил причину так, что понял даже я. Даже настройки не сбились, что удивительно.
Андрей П.Order No. 163008 · 29 July 2026
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Больше всего напрягало: не держит ось. Сделали и забыл про проблему.
Роман З.Order No. ZK-2118 · 10 June 2026
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Нужен был ремонт стабилизатора для камеры — обратился сюда. Проблема — не держит ось. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Цену обсудили до начала, сюрпризов не было. Из деталей — мотор. Мастер сразу сказал, что к чему, без размытых формулировок. С чистой совестью советую. Сказать, что доволен — ничего не сказать.
Малик Т.Order No. 73414 · 29 May 2026
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Ремонт видеокамеры — вот с этим и пришёл. Жалоба простая: дрожит картинка. В списке работ — шлейф. Всё оформили по договору, с печатью. Запчасть была в наличии, доплачивать не пришлось. Ставлю пятёрку. Проверили на всех режимах, всё чётко.
Эльмира Т.Order No. 81536 · 25 April 2026
oursДруг посоветовал, у него похожая история была. Проблема — сломался экран. Функции все на месте, ничего не отвалилось.
Асель Ж.Order No. TS-8836 · 22 December 2025
oursМаксим Снегирев не стал навязывать дорогую запчасть, поставил нормальную. Нужна была замена: герметизация. Второй месяц — полёт нормальный.
Александра Н.Order No. 424679 · 24 October 2025
oursЦена имела значение, но и горонтия тоже. Утром столкнулся с тем, что разбит экран. Отдельно спосибо мастеру — Дамир М, терпения ему хватило. Сказали 31 000, я согласился без торга. Приняли, выдали квитанцию, всё по-человечески. Заодно поменяли: герметизация. Вернули в тот же день, всё функционирует.
Асель Ж.Order No. ZK-2025/789 · 22 October 2025
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Такое чувство, что техника сговорилась ломатся вся разом. Первое, что заметил: сломался экран. Дамир М возился с этим дольше, чем планировал, но довёл до конца. Запчасть была в наличии, доплачивать не пришлось. Посмотрели, назвали срок — два дня. Мастер показал, что меняет: шлейф. Спасибо, выручили. Пользуюсь ежедневно, вопросов нет.
Роман З.Order No. 2025-4255 · 17 August 2025
oursДо этого обращался в другой сервис, там только развели руками. Симптом был очевидный: сломался экран. Даже настройки не сбились, что удивительно!!
Аскар Ж.Order No. 27533 · 8 May 2025
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Ещё утром всё работало, а к вечеру — запотела. Дамир М помог выбрать, без навязывания. Разобрали, посмотрели: аккумулятор. Могли бы взять больше, но взяли по-божески. Приняли без очереди, оформили за пять минут. Вернули в тот же день, всё функционирует
Айгерим Б.Order No. TS-3330 · 28 February 2025
oursПозвонил узнать про ремонт видеокамеры. Жалоба простая: сломался экран. Приехал без записи, приняли как есть. Заплатил 26 000, и не жалею. Деталь на замену — шлейф. Буду советовать знакомым. С тех пор ни разу не подвёл.
Дарья С.Order No. ZK-2025/412 · 25 February 2025
oursБольше всего напрягало: не включается. Максим Снегирев всё объяснил и не пытался впарить лишнее. Проверили при мне, показали, что всё держит.
Сергей Р.Order No. ZK-2024/802 · 7 November 2024
oursНужен был счёт и чек, у нас техника на балансе организации. Привёз на диагностику: экшн-камера. Жалоба простая: запотела. Заплатил 14 500, и не жалею. Прошивку не тронули, всё как было.
Елдос К.Order No. 604947 · 5 November 2024
oursПоломка застала перед командировкой, тянуть было нельзя. После выходных обнаружил: сломался экран. Всё оформили по договору, с печатью. Деталь на замену — матрица. Запчасть была в наличии, доплачивать не пришлось. Работает как раньше, придирок нет.
Наталья С.Order No. ZK-5443 · 19 September 2024
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Сначала думал, что ерунда, но появилось: сломался экран. Разобрали, посмотрели: шлейф. По деньгам вышло адекватно, в другом месте просили больше. Договорились на утро, к девяти уже был свободный мастер. Функции все на месте, ничего не отвалилось
Алишер У.Order No. 21664 · 16 October 2023
oursСмотрел, у кого есть запчасти на такую модель. Ремонт экшн-камеры — вот с этим и пришёл. Повод для визита: разбит экран. Отдельно спосибо мастеру — Максим Снегирев, терпения ему хватило. Вышло 11 000 тенге, дешевле, чем я рассчитывал. Диагностику сделали бесплатно, хотя я был готов платить. Поставили новую деталь: герметизация. Уже полгода — ни одного сбоя.
Ксения И.Order No. 49216 · 15 September 2023
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Включил, проверил, работает
Камила А.Order No. 64561 · 14 September 2023
oursЖалоба простая: дёргаеться. Дамир М принял, посмотрел и сразу сказал, что делать. Ребёнок уже проверил на прочность, держиться!!
Динара М.Order No. 76987 · 3 August 2023
oursДолго откладывал ремонт, потом всё-таки собрался. Вечером включил — и всё стало ясно: не включается. Заодно поменяли: дисплей. Даже с учётом запчасти вышло гуманно. Всё оформили по договору, с печатью. Включил, проверил, работает.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIn Kazakhstan, you can't point the lens into other people's windows, apartments, or private property without the owner's consent. Such cameras are considered a violation of privacy, so during repair and setup, the technician also checks the viewing angle.
For a private home, people usually choose outdoor IP cameras with protection against moisture and frost, and with IR illumination for night. If your camera is already installed and has broken down, the technician will tell you during diagnostics what's cheaper — fixing it or replacing it.
Usage depends on the model and resolution: cloud cameras use more, while local recording to a DVR barely loads the channel. If the camera stops connecting to the network, the cause may be the communication module — this is checked during repair.
Yes, this is a common issue: the slot, contacts, or firmware are usually to blame, less often the card itself. The technician will check the slot and board and offer slot repair or reflashing.
Yes, we take in both car dashcams and action cameras like GoPro. They have their own set of common failures, so we first do free diagnostics and tell you what can be fixed.
Yes, for replacing the sensor and lens, we provide a 1-year warranty — both on labor and on parts. If the same issue appears during this period, we'll handle it under warranty.
Tech Service repairs video cameras in Almaty at your home or in our service center: our technician arrives within 60 minutes anywhere in the city, diagnostics are free, and you get a 1-year warranty on labor and parts. We work on CCTV cameras, IP and analog, outdoor, dome, PTZ, action cameras, and dash cams.
Owners bring in cameras that stopped showing an image, won't turn on, fog up from the inside, or lose focus. We take on CCTV, action cameras, and dash cams — from outdoor domes to pan-tilt-zoom models.
| Camera type | What breaks most often | What we check |
|---|---|---|
| Outdoor dome | Sealing, condensation | Dome, seals, board |
| PTZ pan-tilt-zoom | Pan mechanism | Mechanics, motor, ribbon cable |
| IP camera | PoE module, port | Power, network port |
| Analog AHD/CVBS | Connector, cable | Line, connectors |
| Wi-Fi camera | Communication module | Antenna, network settings |
| Action camera | Lens, battery | Body, glass, contacts |
| Dash cam | Ribbon cable, sensor | Connections, board |
Inside a camera, the sensor, lens and focus ring, IR illumination, control board, power connector and PoE module, as well as the housing and dome seals, can fail. The sensor produces stripes, dead pixels, or a complete loss of image; the lens loses sharpness after a fall or temperature change; IR LEDs stop illuminating the scene in the dark. The control board suffers from voltage spikes and moisture, the power connector oxidizes, and the PoE module stops delivering power over twisted pair. Fogging from the inside almost always means compromised sealing rather than an electronics failure, so we restore the housing first, then check the board for oxidation. In my opinion, it's cheaper to disassemble the camera once and replace the seals than to replace an oxidized board later.
Before taking the camera off the wall, it's worth ruling out the cable, power supply, and recorder — we explain how to check each link yourself and when it's time to call a technician.
If the device shows live video but doesn't record, the DVR, memory card, or slot is usually to blame, not the camera itself. DVRs and NVRs record to storage, and when the drive is full, damaged, or worn out, the archive simply stops updating even though the live picture remains on the monitor. The slot also suffers from dust and oxidized contacts, especially on outdoor installations where temperature swings and humidity speed up wear. A separate camera can be fully functional—the signal is coming through and the sensor is working. It's easy to check: open the archive on the recorder. If recording is missing from all cameras at once, look for the cause in the recorder or storage, not in an individual camera.
If the camera works fine during the day but the image is black at night, the cause is the IR illumination or night mode settings, not the sensor. IR LEDs light up the scene with infrared light invisible to the eye, so when they fail, the picture disappears as soon as it gets dark. Exposure settings and the day/night switch threshold also matter: if the value is wrong, the device doesn't switch to night mode or overexposes the frame. Look at the camera in the dark through your phone—if the IR LEDs don't glow red, the illumination isn't working; if they glow but there's no image, check the exposure and night mode settings. With these symptoms, the sensor is usually intact and doesn't need replacing.
| Symptom | Likely cause | What to check |
|---|---|---|
| No signal on one camera | Cable or connector | Continuity test, connector condition |
| Camera won't turn on | Power supply | Output voltage of the power supply |
| Signal lost on a group of cameras | PoE injector or switch | Port, load, indicators |
| Image drops periodically | Oxidized connector | Contacts, moisture in the connector |
| Connection error in the interface | Camera's PoE module | Power at the camera input |
You don't always need to take a security camera off its mount and bring it in. Here's when a technician comes to you and when the work is done at the service center, and how each scenario goes.
We make house calls all over the city, the technician arrives within 60 minutes, and most security cameras are diagnosed and repaired on site. The technician brings tools to check the electrical line, cable, and signal—on site you can immediately see how the device behaves together with the recorder and switch. Most often, we replace the adapter or connector, adjust sensitivity, and eliminate line interference on the spot. A house call is convenient when the camera is mounted high up or connected to a surveillance system—taking it down and bringing it in takes longer than having a technician come to you. In our experience, this scenario saves the client a whole day: no need to remove an outdoor dome model, find transportation, and leave the property without surveillance.
You bring the camera to the service center when the sensor, lens, or board needs replacement—such work requires disassembling the housing and checking components on the bench. The sensor and lens are the optical part: after replacement, focus adjustment and image checks under different lighting are needed, and the control board is tested on the bench by applying voltage step by step. The housing is disassembled carefully: outdoor models have seals and sealant, and when reassembling it's important to preserve moisture protection. If the camera has been removed from its mount, bring it along with the adapter and cable—this way the specialist can rule out electrical issues faster and you won't have to come back. From experience, half of "dead" sensors turn out to be a simple voltage drop on the line.
We explain what free diagnostics includes, what makes up the repair cost, and when restoring the device is more cost-effective than buying a new one.
Our diagnostics are free: the technician checks the power, cable, PoE, settings, and device components and identifies the cause of the malfunction. First, they test the line from the power connector to the connectors and measure the input voltage, then check the PoE module and the integrity of the twisted pair, and after that — the device itself: control board, sensor, lens, and IR illumination. The technician also looks at the settings separately — sometimes the image disappears due to a corrupted profile, not hardware. Based on the inspection, you get a specific cause and a list of work needed for restoration. Free diagnostics also makes sense when the client is unsure about repairing — the results show whether the device is broken or the problem was in the communication line.
The technician quotes the cost after free diagnostics, and it depends on which component failed and what parts are needed. Replacing a connector or restoring the housing seal is one level of effort, soldering the control board is quite another, and replacing the sensor along with the lens also requires selecting a part for the specific model. That's why the amount is not given over the phone but after disassembly and component testing, when the real scope of work is clear. The calculation includes the technician's labor and parts, and approval happens before repair begins: you see what is being replaced and why. Board repair and installing a new sensor are different in labor intensity, so the exact amount cannot be quoted before disassembly and component testing.
Repair makes sense when the device's sensor and optics are working and only one component has failed — power, board, IR illumination, or sealing. In such cases, restoration brings the equipment back to working order, and the housing and mounting stay the same, which matters for an already installed system. It's a different story if both the sensor and lens are damaged and the housing is not sealed and moisture has gotten inside: then replacement is more reasonable than sequential repair of multiple components. The technician distinguishes a failure of the device itself from a problem with the cable, power supply, or recorder — and that changes the conclusion, because fixing the communication line instead of the device makes no sense. The decision is made after diagnostics, not by appearance: a cracked glass doesn't mean the equipment is worn out.
The warranty covers both the technician's work and the installed parts. We explain what exactly it covers when it comes to restoring a surveillance camera and how this affects repeat visits.
We provide a 1-year warranty on labor and parts — it applies both to the surveillance camera and to replacing the sensor or the lens assembly. There is one condition: the fault must be related to the component the technician worked on, not to new damage to the housing or a power surge on the line. Over 4–20 years of practice, technicians have seen how a one-time replacement "on a handshake" leads to a second visit and a second bill for the same part. The warranty on parts eliminates this scenario: if the replaced component fails again, you don't have to pay for it twice. Before handing in the camera, clarify which components are included in the scope of work — this list will make it easier to prove that the case is covered by the warranty.
Replacing the sensor and lens is covered by the same 1-year warranty as other work — both for the part itself and for the installation. The sensor is responsible for the image, the lens for focus and aperture, and both components are sensitive to moisture and temperature changes outdoors. When the dome fogs up, a Tech Service technician restores the sealing of the housing and the protective glass: without this, the new sensor will fog up just like the old one. Rubber seals, silica gel inside the housing, and the dome fit are the three points where an outdoor model most often loses its seal. These components require care, so after replacement it is important that the housing remains sealed; otherwise moisture will again disable the camera, and the replacement won't deliver the expected result even with a working part.
A direct service provider maintains equipment with its own specialists and is responsible for the result, while an aggregator or intermediary merely passes the request to a contractor. The difference becomes clear when you make a warranty claim.
We are a direct service provider: your device is serviced by our specialist, not a contractor from an aggregator, so we are responsible for the work and the warranty. Your request doesn't go to a third party — it is handled by the same service that later comes to your site. A 1-year warranty applies to labor and parts, and you need to claim it from us, not look for a contractor you didn't choose. When you go through an intermediary, the warranty is provided by someone you don't know and didn't choose. With a direct service provider, the same party is responsible for the work and the installed parts. In my view, this is the main thing to clarify before the camera is disassembled: who exactly is responsible for the replaced sensor or lens six months after service.
Our specialists have 4 to 20 years of experience, travel anywhere in the city within 60 minutes, and provide free on-site diagnostics. Such experience means the person has seen dozens of similar faults and can tell from external signs whether it's a dead IR illuminator or a sensor failure. The field technician arrives with tools and immediately checks the power, cable, and settings instead of taking the camera away blindly. An experienced specialist can often identify the faulty component from the symptoms before disassembly — this saves time and lets them say right away whether a part needs replacing or whether adjustment and sealing are enough. Free diagnostics removes the main risk: you don't pay for the inspection even if you decide to decline the service.
We service surveillance cameras at business sites — in shops, offices, and warehouses where the whole system needs to work, not just one camera. On-site camera repair in Almaty starts with checking the entire chain: the DVR, the PoE switch, and the power line. At the site, our technician first checks whether the whole line is affected — the recorder, switch, and power — because one faulty camera can cause errors across the entire system. In a shop or warehouse, surveillance downtime means an unmonitored perimeter, so a 60-minute response covers the most critical period. And on site, you can see exactly what caused the failure — one camera, or perhaps the shared power for the whole line. If there are multiple cameras, the specialist assesses which one to replace and which just needs reconfiguration.
Camera symptoms look similar, but the causes vary — from a simple cable to the image sensor. Below is a quick summary of where to start troubleshooting and what to look for when choosing a technician.
23brands
We repair video cameras from these manufacturers. Pick a brand to learn about common issues and parts.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your computer won't turn on, start simple: check the outlet, power cable, switch on the power supply, and the power button.
19 January 2026 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read












