Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a vacuum cleaner

Gutrend Vacuum Cleaner Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Filter replacementfrom1 500 ₸
  • Cord rewind mechanism repairfrom2 500 ₸
  • Motor brush replacementfrom2 500 ₸
  • Vacuum cleaner disassembly and cleaningfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Gutrend vacuum cleaner faults in Almaty

Below are the typical symptoms Gutrend owners report and the likely causes. The technician confirms the exact cause after free diagnostics.

PricesPricesTECH SERVICE03

How much Gutrend vacuum cleaner repair costs in Almaty

The table shows how much Gutrend vacuum cleaner repair costs: a "from" price for labor without parts and the timeframe, with the final amount agreed with the technician before any repair work begins.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Gutrend vacuum cleaner repair in Almaty

Howling and vibration, lost suction

1–3 business daystime

from 8 000 ₸cost

Problem
The Gutrend vacuum cleaner howled loudly and vibrated, suction dropped almost to zero — the motor bearings and impeller were broken.
What we did
The technician at the workshop disassembled the housing, replaced the motor entirely, reassembled the vacuum cleaner and checked suction in all modes.
Result
The howling and vibration are gone, suction is restored in all modes; 1-year warranty on labor and parts.
I want the same
Artel vacuum cleaner: howling and vibration, lost suction — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Gutrend vacuum cleaner repair works at your home in Almaty

Five steps from request to checking the vacuum cleaner.

  1. Requestsame day

    Describe the symptom and your Gutrend vacuum cleaner model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    What the technician brings for your specific model: consumables and fasteners for the body type and turbo brush.

  3. Diagnosticsfree

    What the technician uses on site: a portable tester, a set of screwdrivers and probes, and checks components along the power circuit.

  4. Approval and repairafter approval

    The technician shows the worn part, explains the choice of replacement and gives the final price from the price list before starting work.

  5. Check and warrantyafter reassembly

    The technician demonstrates the result on site, shows the replaced part and hands over the repair documents.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a vacuum cleaner at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Gutrend vacuum cleaner repair in Almaty

Provide your Gutrend vacuum cleaner model, the symptom and your address in the request, then agree on the day and time of the visit with the technician.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Gutrend vacuum cleaner repair in Almaty

Ержан А.Order No. ZK-5205 · 17 April 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Больше всего напрягало: не включается. Tech-service оказался ближе всех, за это и выбрал. Крутит ровно, без рывков.

Repair: stick vacuum

Андрей П.Order No. TS-4997 · 28 December 2023

ours

Хотел сначала вызвать мастера на дом, потом передумал. Запчасть была в наличии, доплачивать не пришлось. Уже полгода — ни одного сбоя.

Repair: stick vacuum

Сауле Н.Order No. ZK-2022/567 · 17 August 2022

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Вечером включил — и всё стало ясно: не включаеться. Позвонили заранее, предупредили, что задержится на полчаса. Вышло дешевле нового, что логично. Заодно поменяли: шланг. Не пожалел ни разу. Сделали и забыл про проблему

Repair: stick vacuum

Бакыт Ж.Order No. 2022-8882 · 15 August 2022

ours

Техниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Күтуге уақытым жоқ еді, сол күні алып кеттім. Бәрі жақсы, шағымаймын.

Repair: stick vacuum

Фарида К.Order No. ZK-2021/650 · 17 December 2021

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Привёз на диагностику: пылесос. Проблема — шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. По деньгам вышло адекватно, в другом месте просили больше. Мастер показал, что меняет: шланг. Мастер посмотрел, сказал, что возьмётся, и взялся. Если что — обращусь снова. Сделали и забыл про проблему.

Repair: stick vacuum

Индира П.Order No. TS-7580 · 17 January 2021

ours

Искал мастерскую поближе к дому, чтобы не мотатся с техникой через полгорода. Включил, проверил, работает

Repair: stick vacuum

Индира П.Order No. TS-2004-259 · 19 August 2020

ours

Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Руки чесались починить самому, хорошо, что не полез. С чем пришёл: шумит. Сравнивал с двумя другими — здесь вышло ровнее всех. Разобрали, посмотрели: шланг. Выбирал между парой сервисов, Tech-service взял адекватностью. Шум пропал, работает мягко.

Repair: stick vacuum

Ирина Т.Order No. 31352 · 20 July 2019

ours

Пробовал найти мастера в своём районе, но все были заняты. Проблема — шумит. Внешне как новый, если не считать мелкой царапины.

Repair: stick vacuum

Максим Ю.Order No. TS-9450 · 31 August 2017

ours

Техника на гарантии уже не была, так что выбор был свободный. Ещё утром всё работало, а к вечеру — не всасывает. В списке работ — шланг. Заплатил 12 000, и не жалею. Объяснили по телефону, что можно не везти, но я всё равно привёз. Крутит ровно, без рывков.

Repair: stick vacuum

Гаухар Н.Order No. ZK-3383 · 23 April 2017

ours

Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Заявку приняли по телефону, перезвонили через десять минут. Проверили при мне, показали, что всё держит.

Repair: stick vacuum
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Gutrend vacuum cleaner repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Which robot vacuum brand is best to repair in Almaty?

Choosing a brand is a personal decision, but if your Gutrend robot has already broken down, what matters more than the brand is having a technician and parts available. We repair Gutrend robots with on-site service across the city: free diagnostics and a 1-year warranty on labor and parts.

Why might a Gutrend vacuum stop turning on after cleaning?

Most often it's overheating: the motor protection kicked in or the filter got clogged, and the unit needs to cool down and dry out. If your Gutrend still won't start after a rest, check the base contacts and the button, and then you'll need diagnostics.

What should I do if my Gutrend vacuum smells musty after washing the water filter?

The smell appears if the filter was reassembled damp or debris is left in hard-to-reach places. Dry all the parts completely before reinstalling, and if the smell persists, a technician will check the seals and internal channels during disassembly.

How long does a Gutrend robot vacuum typically last before its first major repair?

Lifespan depends on the model and care: with regular cleaning of brushes and filters, the unit lasts noticeably longer. The battery is usually the first to need attention, while the motor and board last for years under normal use.

Can the battery in a Gutrend vacuum be replaced separately, or is the whole unit swapped?

It depends on the model: on many upright and robot vacuums the battery is removable and replaced as a separate component. In some cases the battery is built into the housing, so a technician disassembles the unit and selects a compatible replacement.

How can I tell if the turbo brush on my Gutrend vacuum is worn out rather than the motor being broken?

If the motor hums steadily but the brush doesn't spin or turns in jerks, the issue is the belt, shaft bearing, or hair wrapped around it. With weak suction and sluggish rotation without noise, the drive is usually to blame; diagnostics give the exact answer.

Repair guideArticleTECH SERVICE08

Gutrend vacuum cleaner repair in Almaty with a technician visit

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Gutrend vacuum cleaners in Almaty: robots, upright models, and wet-cleaning units with water filtration. A technician comes to your home within 60 minutes anywhere in the city or you can drop off the device at our service center. Diagnostics are free, we agree on the price after them, and we provide a 1-year warranty on labor and parts.

Symptoms and error codes for Gutrend vacuum cleaner repair

A blinking indicator and failure to start are the most common reasons people contact us about this brand. Let's look at what the indicator means and which components we check first.

Why a Gutrend robot vacuum won't turn on and the indicator blinks

A blinking indicator on a Gutrend robot usually points to a low battery or a control board fault rather than the motor — that's why we start diagnostics with the base contacts and battery condition. Gutrend robot vacuums get power through spring-loaded contacts on the base: oxidation or misalignment of the pads causes intermittent charging, and the unit goes into protection mode. When the contacts are clean, we check the battery voltage under load and inspect the control board for signs of overheating and liquid damage. With rhythmic blinking and no start even from a full base, the cause is almost always the board, not the battery — you can't tell the difference yourself without testing. Note the blink pattern before the technician arrives: the controller interprets steady and double flashes differently, and the recording makes diagnostics more accurate. We start this kind of Gutrend vacuum cleaner repair in Almaty with free diagnostics to pinpoint the faulty component.

Why a Gutrend vacuum cleaner hums or whistles loudly

Humming and whistling on a Gutrend usually come from a clogged HEPA filter, a foreign object in the turbo brush, or a worn motor bearing — we check these three components in order. First we remove the HEPA filter and inspect the cyclone: compacted dust on the mesh narrows the airflow and forces the motor to run at higher RPM. Then we disassemble the turbo brush — wound threads and hair on the shaft cause vibration and a characteristic rumble. If both are clean, we listen to the motor at idle: a metallic whistle at high RPM indicates bearing wear, not a clog. In our experience, a whistle with normal suction almost always points to the bearing, while a drop in suction along with noise indicates the filter and cyclone — so we assess airflow first, then listen.

What the error code on a Gutrend vacuum cleaner means

  • Blink sequence: note the number of flashes, pauses, and repeats — the controller uses this pattern to distinguish fault categories.
  • Display code: write down the characters completely, including the letter prefix that refers to a specific component.
  • When it appears: a signal right at power-on, on the charging base, or at the start of cleaning points to different causes.
  • Behavior after restart: check whether the indication repeats or was a one-off — a persistent fault and a single event require different approaches.
  • Conditions before the fault: overheating, water ingress, or a drop narrow the list of components to check and speed up finding the cause.

What to check yourself before calling a technician for Gutrend vacuum cleaner repair

Some Gutrend faults are visible without disassembly — contacts, clogs, battery swelling. Let's go over what you can check yourself and when you definitely need a technician.

Gutrend vacuum cleaner doesn't pick up debris or water from the aqua filter

When a Gutrend doesn't pick up debris or water, the culprit is usually a clog in the cyclone, container, or aqua filter rather than the motor — we start with cleaning and checking suction. First we remove the container and inspect the cyclone: compacted debris and hair block the channel, and air bypasses it. On Gutrend wet vacuums, we separately check the aqua filter — its grille and valve, through which water enters the turbine when overfilled. Then we look at the HEPA filter at the outlet: a clogged membrane creates back pressure, and the unit hums but doesn't suck. After washing the aqua filter, let it dry completely before reassembly — a damp filter causes a musty smell and reduces suction more than a clogged one. Dry the grille and valve separately from the container so water doesn't remain in the seal folds.

Turbo brush doesn't spin or the motor

  • Hair wrap: remove the brush from the shaft and clear away hair and threads — a thick layer on the shaft neck stops rotation even when the motor is fine.
  • Drive belt: check the belt for stretching and cracks — a slipping belt causes the brush to stop under load on carpet.
  • Shaft play: wiggle the shaft by hand; play in the bearings points to wear in the assembly, not the motor.
  • Manual spin: turn the brush by hand; stiff rotation with crunching indicates a problem in the drive mechanics.
  • Response when turned on: if the motor hums steadily but the brush stays still, the fault is local and not related to the motor.
  • Load on the drive: after cleaning hair from the brush, do not continue using it if the brush is stuck — the drive heats up and can take the board with it.

Gutrend not charging on the base

The "not charging" issue with Gutrend comes down to two causes — oxidized contacts on the base or a worn-out battery; we check the contacts first, then the battery capacity. First, we wipe the pads on the body and the base with alcohol: a thin film of dust and moisture causes poor contact, and the device simply doesn't detect the charge. Next, we place the robot on the base and watch the indicator — if it blinks but the charge doesn't increase, we measure the voltage at the battery terminals. We also check the HEPA filter separately: a clogged membrane doesn't affect charging but overloads the motor, and the device goes into protection prematurely. A swollen battery case is visible with the cover removed — do not use the vacuum with such a battery and do not try to recharge it.

Common failures by Gutrend line

Robot, upright, and wet-dry Gutrend vacuums break in different ways. Let's go over the typical components of each line and how to extend their life without a repeat visit from the technician.

Why your Gutrend upright vacuum holds less and less charge

Shorter run time on a Gutrend upright is natural battery wear; we measure capacity and replace the battery with a warranty on the new part. Cordless upright models lose charge faster when used at maximum power with the turbo brush: the brush drive and lights draw energy alongside the main motor, and summer heat in the apartment adds stress to the cells. During a visit, our technician checks capacity under load, not just voltage at the contacts — by voltage alone, a worn battery often looks fine. Don't store the upright vacuum discharged on a shelf — deep discharge accelerates cell degradation more than daily use. Keep the charge at around half capacity during idle periods longer than a week: that way the battery will last more cycles before its first replacement.

Do you repair Gutrend wet-dry vacuums with a water filter

Yes, we service Gutrend wet-dry vacuums with a water filter — from cleaning the container and eliminating musty odors to replacing components; it's just another line we work on, like robots and uprights. Most often, a model with weak suction comes in for diagnostics: the cause is clogged channels after washing or a container seal that no longer holds vacuum. We disassemble the unit, flush the air path, check the motor, and replace worn parts if needed. A musty smell after washing the water filter isn't always a breakdown: more often it's an incompletely dried filter or stagnant water in the container, not a motor fault. After each wet cleaning, disassemble the container and dry the filter completely, not just until damp — residual moisture in the folds causes odor within a day.

Typical components by Gutrend line

Gutrend lineWhat fails firstWhat we checkPrevention
Robot vacuumBoard, wheels, side brushesBase contacts, drives, indicatorsClean brushes and sensors
UprightBattery, turbo brushBattery capacity, brush driveDon't store discharged
Wet-dry with water filterWater filter, containerSuction, filter drynessDry completely after washing

How Gutrend vacuum repair works

We've set up Gutrend vacuum repair in Almaty in a clear order — from request and visit to diagnostics and approval of work. Below we break down each step.

Technician visit to your home or service at the shop

We arrive at your home within 60 minutes anywhere in the city, or you can bring your Gutrend vacuum to our service center — you choose the format, and the technician comes with their own tools. The on-site technician checks the device right there: opens the housing, inspects the contacts, turbo brush and control board, and if needed takes the unit in for a deeper check. The second option is service at the shop: you bring the device yourself and leave it for diagnostics. Both formats are handled by the same technician. If you're bringing the vacuum yourself, remove the battery and take a photo of the indicator before it turns off — that way the technician can see the symptom that won't reproduce on site. Include a short description of when the fault appears: on carpet, after washing, or when the battery runs low.

How free Gutrend diagnostics works

  • Request: you describe the symptom over the phone, and our team member clarifies the line and model — robot, upright or wet vacuum.
  • Visit or drop-off: at the agreed time the technician comes to your home or receives the device at the service center.
  • Checking components: charging contacts are tested, the battery is checked, and the motor, turbo brush and control board are inspected.
  • Approval: the technician names the cause and the cost of work before repair begins — you pay only for what you've approved.
  • Repair and testing: after parts are replaced, the device is run in operating modes to make sure the symptom is gone. The technician gives the price after the check — any figure over the phone is an estimate, not a quote.

What to bring to the service center

  • Charging base and contacts: without the station we can't check whether the device charges and whether the charging contact holds.
  • Battery: it shows the real capacity and how the device behaves when discharging.
  • Attachments and turbo brush: contact groups and brush rotation can only be checked when assembled with the housing.
  • Symptom description: write down when the fault appears — after washing, on carpet, when the battery runs low — this often saves a whole stage of checking.

Warranty and cost approval

A warranty and transparent pricing remove the main risk when you contact a service center. Here's exactly what our warranty covers, how the price is approved, and why dealing directly with the contractor is more reliable than going through an intermediary.

What warranty covers Gutrend vacuum repair

We give a 1-year warranty on labor and parts — it also covers a replaced Gutrend battery, not just the repair itself. If within this period a component we replaced or restored fails again due to our fault, we fix the recurring issue under warranty. The warranty is issued for a specific component and type of work, so it records exactly which element was serviced: motor, control board, battery or turbo brush. This approach works well for both the technician and the client — if you come back, you don't have to prove again how the fault relates to the previous visit. Battery capacity drops gradually, and the owner notices it months later. The warranty on a part lasts as long as the warranty on labor.

How much Gutrend vacuum repair costs in Almaty

The cost of servicing a Gutrend depends on the faulty component, and the technician gives you a quote after a free diagnostic check — before that, it's impossible to name an exact price. The diagnostic is free: the specialist opens the casing, checks the motor, control board, battery, and brush assembly, finds the cause, and only then quotes the work and parts. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer for companies, so you can choose how to pay. Everything is agreed before work starts: if the price or scope doesn't suit you, you can decline the service with no obligation. Don't agree to a 'typical price over the phone' without an inspection: the same symptom — 'not picking up' — can be caused by either the filter or the motor, and the repairs are different. In our experience, a remote estimate almost always differs from the actual cost, because the same behavior can come from different components. That's why we don't quote blindly — we show you the test results and explain exactly which part needs replacing.

Why go direct instead of through a middleman

Tech Service is a direct provider with its own technicians, each with 4 to 20 years of experience — not an aggregator: the same technician who comes for the diagnostic does the repair. A call-out anywhere in the city takes up to 60 minutes, and the specialist identifies the fault on the spot — no handing the device off to third parties and no repeat inspections. You can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies, and the 1-year warranty on labor and parts is provided by the person holding the tools. With a middleman there's an extra link between you and the technician — with a direct provider, the person holding the tools is responsible, not a dispatcher. In my view, that's the main difference: responsibility for the result isn't diluted between a call center and a contractor. When one person handles everything from diagnosis to final check, it's easier for them to honor the warranty — they remember what they did and how.

Key points on Gutrend vacuum cleaner repair

In short, what determines the outcome of a Gutrend vacuum cleaner repair: the right diagnosis, honest agreement on the work, and a warranty that covers both labor and the parts installed.

  • Control board and battery: a blinking indicator and failure to start on a Gutrend are more often caused by electronics or the battery, not the motor.
  • Clogs as the cause: a blocked cyclone, HEPA filter, and water filter reduce suction, and this is visible without disassembling the casing.
  • Different product lines: a robot, an upright model, and a wet-cleaning unit each fail in their own way, so maintenance differs by type.
  • Transparent terms: diagnostics should be free, and the technician quotes and agrees on the price before starting work.
  • Warranty: a year on labor and parts, including a replaced battery, is the key criterion when choosing a service center.

60brands

Besides Gutrend, we repair other vacuum cleaner brands in Almaty

We repair Gutrend vacuum cleaners and other brands that have their own pages on the site.

We also repairWe also repairTECH SERVICE09

Besides Gutrend vacuum cleaner repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Gutrend vacuum cleaner repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp