experience10 yearsMaksim S.
Graphics card repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 031 92 28Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Technician visit within 60 minutes across the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Select a symptom to understand which component is usually checked.
power, fuse, board
from14 500 ₸
roller, spring, sensor
from3 000 ₸
roller, guides, paper
from3 000 ₸
cartridge, drum, metering blade
from10 500 ₸
contacts, chip, board
from14 500 ₸
code indicates component
from5 500 ₸
lamp, cable, glass
from8 000 ₸
worn rollers, bearings, gearbox
from3 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 8,500 ₸cost

BeforeAfter5 steps

From request to performance check — five steps.
Submit a request, describe the symptom and MFU model.
The technician will clarify the model, error code, and print volume to bring the necessary parts.
After inspection, the client receives a list of works and parts for approval.
The client decides whether to install original or analog parts, considering lifespan and price.
Warranty applies to the performed work and installed parts.
The computer and laptop repair department in Almaty has 7 technicians with 6 to 15 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsGraphics card repair technician
experience6 yearsPC and laptop diagnostics technician
experience8 yearsLaptop repair engineer
experience10 yearsSoftware installation specialist
experience7 yearsPC and laptop repair technician
experience13 yearsDiagnostics and virus removal specialist
experience15 yearsConsultant
We reply during working hours
Choose a convenient booking channel and visit time — the technician will confirm the arrival and clarify details on site.

Warranty question? Call us
+7 (775) 031 92 287 898 reviews of repairs at TECH SERVICE in total
Сабина Г.Order No. TS-4606 · 22 October 2026
oursПозвонил в три места, здесь единственные назвали цену сразу. Оставил заявку на ремонт МФУ. Повод для визита: замятие. Мастер показал, что меняет: печка. Все разъёмы на месте, ничего не люфтит.
Аяна Е.Order No. 2026-8105 · 1 May 2026
oursОсновная жалоба — замятие. Сергей Архипов возился с этим дольше, чем планировал, но довёл до конца. Проверил дома — всё на месте, ничего не забыли.
Полина В.Order No. 25506 · 15 April 2025
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Ещё утром всё работало, а к вечеру — ошибка. Сергей Архипов объяснил причину так, что понял даже я. Даже с учётом запчасти вышло гумано. Ребёнок уже проверил на прочность, держится
Талгат С.Order No. 84340 · 9 March 2024
oursЦена имела значение, но и гарантия тоже. Техника работала годами, а тут — не сканирует. Роман Мигунов приехал в тот же день, хотя был конец смены. Сначала сказали одно, потом уточнили, но в итоге всё совпало. Поменяли: печка. Отдал 15 000, и это вместе с работой. Ребёнок уже проверил на прочность, держится
Айгерим Б.Order No. TS-2681 · 10 November 2023
oursСмотрел, у кого есть запчасти на такую модель. Отдал мастеру: МФУ. С чем пришёл: ошибка. Сергей Архипов возился с этим дольше, чем планировал, но довёл до конца. Поставили новую деталь: печка. Сравнивал с двумя другими — здесь вышло ровнее всех. Проверили при мне, показали, что всё держит.
Нурасыл М.Order No. TS-7201 · 19 July 2023
oursДруг посоветовал, у него похожая история была. Ещё утром всё работало, а к вечеру — не сканирует. Сказали 14 000, я согласился без торга. Сделали и забыл про проблему
Анна Т.Order No. TS-3103 · 1 October 2022
oursХотел сначала вызвать мастера на дом, потом передумал. С чем пришёл: ошибка. Сделали аккуратно, следов разборки не видно.
Елдос К.Order No. TS-7985 · 5 May 2021
oursСмотрел, у кого есть запчасти на такую модель. Основная жалоба — ошибка. Проверили на всех режимах, всё чётко.
Асель Ж.Order No. 96849 · 2 July 2020
oursСкажу прямо: ожидал худшего. Проблема — ошибка. Диагностику сделали бесплатно, хотя я был готов платить. Оплатил картой, чек дали. Под замену пошло: ролик. Однозначно да. Прошивку не тронули, всё как было.
Диана М.Order No. ZK-9764 · 17 December 2019
oursДолго откладывал ремонт, потом всё-таки собрался. Руки чесались починить самому, хорошо, что не полез. Больше всего напрягало: замятие. Прошивку не тронули, всё как было
Дмитрий Л.Order No. TS-1912-513 · 14 September 2019
oursРоман Мигунов возился с этим дольше, чем планировал, но довёл до конца. Проверили на всех режимах, всё чётко
Айнур М.Order No. TS-1908-507 · 6 April 2019
oursДолго откладывал ремонт, потом всё-таки собрался. Настроения писать не было, но пусть будет. Повод для визита: ошибка. Диагностику сделали бесплатно, хотя я был готов платить. В списке работ — ролик. Могли бы взять больше, но взяли по-божески. Второй месяц — полёт нормальный.
Акбота Т.Order No. TS-1804-773 · 29 August 2018
oursНужен был счёт и чек, у нас техника на балансе организации. Нужен был ремонт МФУ — обратился сюда. Жалоба простая: не сканирует. Прошивку не тронули, всё как было
Акбота Т.Order No. TS-1811-886 · 12 March 2018
oursС чем пришёл: ошибка. Сергей Москоленко не стал навязывать дорогую запчасть, поставил нормальную. Проверили на всех режимах, всё чётко.
Сергей Р.Order No. ZK-5644 · 15 February 2018
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. До последнего откладывал, но пришлось признать: ошибка. Запчасть была в наличии, доплачивать не пришлось. Договорились на утро, к девяти уже был свободный мастер. Сделали и забыл про проблему
Станислав К.Order No. ZK-9724 · 22 November 2017
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Обидно было, техника не старая совсем. Первое, что заметил: замятие. Назвали 8 000 сразу, в конце сумма не изменилась. Вернули в тот же день, всё функционирует.
Молдир С.Order No. 80902 · 21 February 2017
oursПробовал найти мастера в своём районе, но все были заняты. Диагностика МФУ — с этого всё началось. Симптом был очевидный: замятие. Сергей Москоленко подсказал, как продлить жизнь технике. Приехал вечером, мастер ещё был на месте. С тех пор ни разу не подвёл
Эльмира Т.Order No. ZK-3376 · 10 February 2017
oursПроблема — ошибка. Сергей Москоленко перезвонил, когда всё было готово. С тех пор ни разу не подвёл.
It's fixing a multifunction device when it won't print, scan, turn on, or shows an error. The technician finds the faulty component and fixes the cause, not just the visible symptom.
Most often it's worn pickup rollers or a dirty paper feed path. You can wipe the rollers with a damp lint-free cloth, but if paper keeps slipping, the rollers need replacing — a technician does that.
The cause can be the cartridge, the drum unit, the fuser, or dirty optics — it depends on the model and print type. During diagnostics, the technician will identify what's causing the defect and suggest cleaning or replacing the component.
The code points to a specific component: paper feed, fuser, cartridge, or scanner, but the interpretation depends on the model. Write down the code and give it to the technician so they can bring the right parts.
If the color hasn't returned after cleaning the head, the issue may be clogged nozzles, the cartridge, or the head. Diagnostics will show whether flushing will fix it or the component needs replacing — it depends on the model.
This symptom is often linked to an overheating fuser, a clogged ventilation duct, or a power fault — it depends on the model. The technician will check the heating unit and power during free diagnostics and tell you what to replace.
Tech Service repairs laser and inkjet MFUs in Almaty: our technician arrives at your home within 60 minutes or the device is repaired at our service center. Diagnostics are free, the technician gives you the price after diagnostics, and we provide a 1-year warranty on labor and parts. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
The owner comes with a specific symptom: the device is silent, jams paper, or displays a code. Below we break down the most common signs—what they mean and how a technician handles them.
Most often the power supply or the control board is to blame, but before bringing the device in, we check the outlet, cable, and power button—this is part of the free diagnostics. The power supply delivers voltage to the MFU's components, and if capacitors break down, the device either won't start at all or shuts off a few seconds after startup. The control board is responsible for starting the motor and warming up the fuser, so its failure produces a similar picture—the device clicks but the print cycle doesn't begin. Technicians with 4 to 20 years of experience distinguish one cause from another by measuring the voltage at the power supply output. If the MFU clicks but won't start, the issue is almost always the power supply, not the button—the technician will confirm this on site and tell you whether the unit can be repaired or needs replacement, and the MFU repair price depends on the faulty unit and is determined after diagnostics.
The code on the display points to a specific unit or failure mode, but the same codes mean different things on different brands, so it must be decoded by model. In laser devices, some messages relate to the fuser and thermistor, in inkjet ones—to carriage parking and ink levels, while paper feed codes point to pickup rollers. Resetting the error with a button or through the service menu clears the message but doesn't fix the cause: a worn unit returns the same code after a few copies. Some messages are service-related and can be cleared with a setting, others directly indicate real wear of a part. A technician must tell them apart: without that, a reset only gives a short break, and the fault will reappear—sometimes on the very next page of the document.
The main fear of a broken device owner is "they'll come and charge a fortune." So we show exactly which components the specialist checks on site, when the price is given, and what affects the arrival time.
The specialist gives you the price after a free diagnostic, once the cause is known — before that, you don't pay anything. First, they take the device apart, test the components and check them in operation, then explain which part failed and what work is needed. The final MFU repair price depends on the nature of the breakdown and the parts required, not on a rough guess from a price list. This approach protects you from surprises on the bill: if after disassembly it turns out another part is needed, the specialist will agree on it separately rather than adding it silently. You can refuse the work at any point — you still won't pay for the inspection, because it's free. In our experience, this is the main argument for those who have dealt with pushy services before. Ask the specialist which components they checked and why they chose that particular solution — it makes it easier to understand what you're paying for.
The specialist arrives at your home within 60 minutes anywhere in the city, and the on-site MFU diagnostic itself doesn't take long — they'll give you the exact time over the phone when they take your request. At your home, they can realistically check the power supply, paper feed, cartridge and connection to the computer: that's enough to make a preliminary diagnosis. If the symptom clearly indicates that disassembly is needed, the specialist will suggest the service center — so you don't waste time on a second visit. Our inspection is free both at your home and at the workshop, and the 1-year warranty covers labor and parts after the repair. Describe over the phone how the device behaves: the code on the panel, noise, paper jams — this helps the specialist bring the right tools and avoid a second trip. It's best to give the exact address when you place the request — that way the technician can plan the visit faster.
Not every breakdown can be fixed on site. Here's what the engineer does at your home, what requires the service center, and how to choose the right option for your symptom.
We take the device to the service center when the fuser needs replacing, the control board or power supply needs repair, or after an ink spill — these jobs require disassembly and checking internal components. The fuser is the most heavily loaded part of a laser device: the roller and thermal film wear out from constant heating, and replacement requires access inside the casing. The control board and power supply fail after voltage surges, and they are tested on a disassembled device. An ink spill in inkjet models is dangerous because the liquid gets onto nearby boards and contacts. If the diagnostic reveals a service-center repair, the technician doesn't disassemble the device on site — this reduces the risk of damaging nearby components during transport. We carry out MFU repair in Almaty at the service center with a 1-year warranty on labor and parts.
| Symptom or unit | Where it's fixed | What the technician does |
|---|---|---|
| Paper jam | at your home | replaces pickup rollers, cleans the paper path |
| Service error code | at your home | checks the area, clears the code |
| No Wi-Fi connection | at your home | checks settings and the communication board |
| Fuser wear, streaks | at the service center | disassembles, replaces the roller or fuser |
| Won't turn on, power supply | at the service center | checks power and the control board |
| Ink spill (inkjet) | at the service center | disassembles, cleans the units |
Laser and inkjet MFPs have different weak points: one wears out mechanically, the other dries out its ink. Here's why "dried-out head" means an inkjet, while "worn roller" means a laser.
In a laser MFP, the pickup rollers, fuser, and toner cartridge wear out — these are parts with mechanical wear, and faults show up as streaks, jams, and dark prints. Rubber pickup rollers lose grip on the paper, and the sheet gets stuck at the entrance to the paper path or feeds in at an angle. The fuser bonds the toner to the sheet, and its fuser film and pressure roller wear down from constant heating, so the print comes out faded or smudges when touched. The toner cartridge adds defects when the photoconductor drum reaches the end of its life: a repeating streak appears along the edge of the sheet, and the background turns gray. The fuser in a laser MFP wears out gradually: first streaks appear on thick paper, then on regular paper, so the early sign is easy to miss.
In an inkjet MFP, the printhead suffers most often: ink dries out during idle periods, one color stops printing, and after an ink spill you need disassembly and cleaning of the units. The head nozzles clog if the device sits for weeks without printing, and then a stripe of one color disappears on the sheet or white gaps appear across the entire width. An ink spill happens because of an overfilled waste ink tank or a damaged pump, and the liquid gets onto the board and mechanics, leaving sticky smudges inside the casing. If an inkjet MFP won't print in one color, cleaning doesn't always help — after long idle periods, ink clogs the head channels, and then replacement is needed, not flushing. During free diagnostics, the technician checks the nozzles, pump, and waste ink tank to pinpoint the cause and agree on the scope of work before starting the repair.
We work with both home and office MFPs. Below are the brands customers bring to us most often, and the typical weak points of each line.
We service both home and office MFPs: office machines wear out their fuser and pickup rollers faster due to constant load, but the diagnostic logic stays the same — from symptom to part. An office machine prints hundreds of pages a day, so its consumable parts fail earlier than the manufacturer's stated lifespan, while an inkjet model in the office sits idle between jobs and more often suffers from dried ink in the head. We arrive within 60 minutes anywhere in the city and determine on site whether the part can be repaired or needs replacement. It's important to stop an office MFP before it completely fails: a worn fuser takes the shaft and nearby mechanisms with it, and delayed service costs more than a planned replacement at an early stage.
If your brand isn't on the list, leave a request — the technician will clarify the model over the phone and tell you whether they take it on before the visit. The list above isn't a limitation but a record of requests: we also get rarer machines and models from previous generations. Based on the model name and symptom, a specialist can often tell on the call whether restoration makes sense — so you don't waste time if the part is unavailable or the work isn't worthwhile. Our diagnostics are free, the warranty is 1 year on labor and parts, and the technician quotes the price after inspection. If you're unsure whether a specific model is worth repairing, just describe what's happening with it.
The warranty is the final decision trigger: it shows whether the service is ready to stand behind its results. Here's what our 1-year warranty covers and where to turn if the problem comes back.
We provide a 1-year warranty on labor and parts — that is, both on the technician's work and on the parts they installed. Both are covered by a single twelve-month term, and that's fundamental: the owner doesn't need to figure out whose defect it is — the unit after soldering or a new component from the batch. If a replaced element fails within a year, the issue is resolved under the service's warranty obligations. In our practice, disputed situations are more often related to parts than to assembly. Warranty on parts is no less important than warranty on labor: when a component fails early, it's replaced free of charge rather than billed again.
If the problem comes back within the warranty period, contact us — the technician will check whether it's related to the service and resolve it under warranty. First, they perform a repeat diagnosis: they check the unit that was repaired and nearby elements to find the cause. Around the city, a technician arrives within 60 minutes, so a follow-up inspection doesn't stretch into weeks. Then it depends on the check result: a confirmed case is closed free of charge, while a new fault is discussed separately. A repeat failure doesn't always mean poor work: sometimes a neighboring unit that was still working during the first check acts up — the technician will check that separately to avoid replacing a working part. If the case is recognized as warranty, we perform the repeat repair at no charge, and for a new fault we agree on the work separately.
A warranty matters more than a low price, because cheap service with no obligations often comes back as a second breakdown — and you end up paying twice. First for questionable work, then for fixing the consequences, and together it costs more than going straight to a technician who stands behind the result. The price is made up of parts and labor, while a service warranty is the extra layer that shifts the risk to the provider. Our diagnostics are free, so the technician quotes the price after the inspection, once the real cause of the failure is clear. When choosing a provider, ask not only about the price but also what exactly the warranty covers — labor, parts, or both; these are different things, and their terms may vary.
We've gathered in one place what most often shapes the decision about a broken multifunction printer: what to start with when choosing a technician and what to look for so you don't have to repeat the service.
17brands
Our technicians service MFUs and printers of popular brands. Choose a brand to learn about common issues.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your computer won't turn on, start simple: check the outlet, power cable, switch on the power supply, and the power button.
19 January 2026 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read












