Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a vacuum cleaner

Kirby Vacuum Cleaner Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics.

  • 1-year warranty on labor and parts
  • Technicians with 4 to 20 years of experience
  • You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Filter replacementfrom1 500 ₸
  • Cord rewind mechanism repairfrom2 500 ₸
  • Motor brush replacementfrom2 500 ₸
  • Vacuum cleaner disassembly and cleaningfrom3 000 ₸
All prices
2ГИСЯours4,96 064 reviews
2GIS · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Kirby vacuum cleaner faults in Almaty

Causes of suction loss in Kirby vacuums: clogged airflow path, worn motor brushes, leaks in the housing, clogged filters.

PricesPricesTECH SERVICE03

How much Kirby vacuum cleaner repair costs in Almaty

The table shows how much vacuum cleaner repair for Kirby costs in Almaty: a starting labor price without parts and the timeframe, with the technician confirming the total before any work begins.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Kirby vacuum cleaner repair in Almaty

Howling and vibration, lost suction

1–3 business daystime

from 8 000 ₸cost

Problem
The Kirby vacuum cleaner howled loudly and vibrated, suction dropped almost to zero — the motor bearings and impeller were broken.
What we did
The technician at the workshop disassembled the housing, installed a new motor, reassembled the vacuum cleaner and checked suction in all modes.
Result
The vacuum cleaner runs smoothly, without howling or vibration, suction is restored in all modes; 1-year warranty on the work and on the parts.
I want the same
Artel vacuum cleaner: howling and vibration, lost suction — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Kirby vacuum cleaner repair works at your home in Almaty

Five steps from request to checking the vacuum's performance.

  1. Requestright away

    Leave a request, and the technician will confirm the time and address.

  2. Technician visitcitywide

    The technician comes anywhere in the city.

  3. On-site conditionsbefore work

    The technician checks the location, access to a power outlet, the model, and the symptoms.

  4. Work approvalbefore repair

    You approve the list of work and part replacements.

  5. Acceptanceafter reassembly

    We check suction and noise after reassembly.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a vacuum cleaner at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Kirby vacuum cleaner repair in Almaty

Call or leave a request on the site and choose a convenient time slot — the technician will confirm the time and address with you.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Kirby vacuum cleaner repair in Almaty

Светлана Д.Order No. ZK-2025/235 · 20 August 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Не люблю сервисы, но этот запомнил. Проблема — шумит. Рустем Т возился с этим дольше, чем планировал, но довёл до конца. Заявку приняли по телефону, перезвонили через десять минут. Запчасть была в наличии, доплачивать не пришлось. Починили и дали гарантию на месяц.

Repair: stick vacuum

Даулет С.Order No. ZK-2025/381 · 23 April 2025

ours

Смотрел, у кого есть запчасти на такую модель. Заодно поменяли: шланг. Ребёнок уже проверил на прочность, держиться

Repair: stick vacuum

Алексей Г.Order No. 25570 · 13 November 2024

ours

Основная жалоба — не включается. Дамир М приехал в тот же день, хотя был конец смены. Нагрев в норме, посторонних звуков нет.

Repair: stick vacuum

Ринат Х.Order No. 229820 · 10 February 2022

ours

Пробовал найти мастера в своём районе, но все были заняты. Нужен был ремонт пылесоса — обратился сюда. Повод для визита: шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Гудит ровно, не греется, всё как надо.

Repair: stick vacuum

Индира П.Order No. TS-7580 · 17 January 2021

ours

Искал мастерскую поближе к дому, чтобы не мотатся с техникой через полгорода. Включил, проверил, работает

Repair: stick vacuum

Индира П.Order No. TS-2004-259 · 19 August 2020

ours

Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Руки чесались починить самому, хорошо, что не полез. С чем пришёл: шумит. Сравнивал с двумя другими — здесь вышло ровнее всех. Разобрали, посмотрели: шланг. Выбирал между парой сервисов, Tech-service взял адекватностью. Шум пропал, работает мягко.

Repair: stick vacuum

Ирина Т.Order No. 31352 · 20 July 2019

ours

Пробовал найти мастера в своём районе, но все были заняты. Проблема — шумит. Внешне как новый, если не считать мелкой царапины.

Repair: stick vacuum

Максим Ю.Order No. TS-9450 · 31 August 2017

ours

Техника на гарантии уже не была, так что выбор был свободный. Ещё утром всё работало, а к вечеру — не всасывает. В списке работ — шланг. Заплатил 12 000, и не жалею. Объяснили по телефону, что можно не везти, но я всё равно привёз. Крутит ровно, без рывков.

Repair: stick vacuum

Гаухар Н.Order No. ZK-3383 · 23 April 2017

ours

Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Заявку приняли по телефону, перезвонили через десять минут. Проверили при мне, показали, что всё держит.

Repair: stick vacuum

Акбота Т.Order No. 16516 · 20 April 2016

ours

Үйдегілер «лақтыр» деді, мен шешім қабылдамай тұрып көрсетуге апардым. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды

Repair: stick vacuum
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Kirby vacuum cleaner repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What is the power of a Kirby vacuum cleaner?

Power depends on the model and year of manufacture; there is no single value. For repair, what matters more is not the rated wattage but the condition of the motor and the airtightness of the air path: a worn motor loses suction.

Which Kirby vacuum cleaner is the most expensive?

The most expensive are considered the top models in the line with an extended set of attachments and a wet cleaning system. This has little effect on repair: the components are similar across most models, and the technician selects a solution for the specific unit.

Which vacuum cleaner is considered the best according to reviews?

Reviews praise equipment that lasts long and is easy to maintain, and Kirby is often included among such models. But even a successful model requires care: a worn motor or a clogged filter negate the advantages.

Why does a Kirby vacuum cleaner smell like burning plastic during operation?

This usually indicates motor overheating, melted wiring, or friction from a jammed impeller. The exact cause will be shown by free diagnostics: the technician will check the winding, brushes, and connections and prevent it from leading to a fire.

Kirby stopped suctioning but the motor hums, what could have broken?

If the motor hums but there is no suction, a clog or a break in the air path is most often to blame, less often wear of the impeller or motor brushes. The technician will disassemble the unit on site and determine what to replace and what to restore.

Can the power switch unit of a Kirby be repaired, or is it only replaced entirely?

It depends on the model and condition of the unit: sometimes it is enough to restore the contacts and the button mechanism, sometimes the unit is replaced entirely. The technician makes the decision after disassembly and agrees it with you before starting work.

Repair guideArticleTECH SERVICE08

Kirby vacuum cleaner repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Kirby vacuum cleaners in Almaty: a technician arrives at your home within 60 minutes or takes the equipment to the service center. Diagnostics are free, we agree on the price after diagnostics, and we provide a 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience know the design of water-filter washing models.

Kirby design and why Kirby vacuum repair is best left to a specialist

Kirby is an upright water-filtration vacuum cleaner with a set of attachments. Its design and premium components differ from household models, so a general technician doesn't always get it right. Let's look at how it's built and where the weak spots are.

How Kirby differs from a regular vacuum cleaner

Kirby is an upright water-filtration vacuum cleaner with a separate switch assembly and removable attachments, not a classic "tube with a bag." Instead of a bag or bin, dust is trapped by water in the water filter, and the motor and impeller sit in a separate housing. The attachments — main, wet cleaning, and turbo brush — are held by belts and come off without disassembling the body. Because of the wet mode and water filter, the components also face a wet environment: leaks and odors become a common reason for service, not just the motor. In my view, owners underestimate the water circuit. Before the first run after washing, check that the water filter is assembled and the seal is dry — moisture in the electrical parts kills contacts faster than motor wear.

What components make up a Kirby and which ones fail most often

  • Motor: creates suction and spins the impeller; as the brushes wear, it loses speed and hums louder than usual.
  • Motor brushes: graphite contacts with predictable wear; they wear out first and cause sparking.
  • Impeller: generates suction and suffers from dust and small debris that get past the water filter.
  • Switch assembly: connects power and modes; vulnerable to moisture from the water filter and to overheating.
  • Main attachment belt: transfers rotation to the brush; stretches and breaks when threads and hair wrap around it.
  • Wet cleaning belt: works in wet mode and wears faster than the dry one due to constant contact with water.
  • Water filter: traps dust in water and needs regular rinsing, otherwise odor appears and suction drops.

Why Kirby models over 10 years old are still worth repairing

We service older Kirby models too, because their components — motor, brushes, belts, switch assembly — are serviceable and replaced individually. The body and attachments of premium equipment are built for a long life, and what wears out first is the consumable mechanics: graphite brushes, belts, water filter seals. Replacing one component restores suction and saves you from buying a new vacuum. In our practice, people most often bring in machines with worn brushes and stretched belts — these parts are replaced and the vacuum works at full power again. Premium equipment has a longer-lasting body and attachments than budget models, so replacing one component extends the life of the whole machine. Before writing off an old Kirby, ask a technician to check the brushes and electrical parts: if that's the only wear, servicing costs less than a new machine.

Common Kirby failures and symptom-based diagnostics for Kirby vacuum repair

We break down frequent Kirby complaints and link each one to a likely component, so you know what to check and what to expect from the technician.

Kirby vacuum smells like burning

A burning smell from a Kirby is most often caused by motor overheating due to worn brushes, a clogged filter, or damaged wiring. We first remove the housing and inspect the motor brushes: the graphite blocks wear down, start to spark, and ignite carbon buildup on the commutator. The second source is a clogged filter, which reduces airflow and makes the winding heat up more. The third is frayed wiring near the power switch: an exposed contact gives off the characteristic smell of melting insulation. Our technician at Tech Service checks all three components in turn, because externally they produce the same symptom but the scope of work differs significantly. If the smell appears, it's best to turn the vacuum off right away: running with sparking brushes accelerates commutator wear and increases the amount of work needed. This symptom is common in Kirby vacuums, and it's important not to delay diagnostics.

Kirby won't turn on or won't pick up

If your Kirby won't turn on, the switch assembly and wiring are checked first. If the motor runs but there's no suction, the impeller, hose, and clogged filter are the usual suspects. The first step is to test the start circuit: oxidized contacts or a broken cord can leave you with complete silence even when the motor is fine. When the motor hums but no air moves, the cause is almost always a blocked path: compacted dust in the hose, a clogged filter, or broken impeller blades. We trace the airflow from the nozzle to the exhaust and inspect every connection, checking the impeller for chips and play. A hum without suction means the motor is running but the airflow is blocked, so diagnostics start with the impeller and hose, not with replacing the motor.

Kirby symptoms and likely components

SymptomLikely componentWhat the technician does
Burning smellMotor, brushes, wiringInspects brushes and windings, fixes overheating
Won't turn onSwitch assembly, wiringTests the start circuit and contacts
Hums but no suctionImpeller, hose, filterLooks for clogs and inspects the impeller
Loud noise and whistlingBearing, impellerChecks impeller rotation and fit
Shampoo mode not workingWater filter, shampoo beltServices the water filter, replaces the belt

What we replace and what we repair

Not every Kirby component is replaced as a whole—some parts can be restored. Here's what we usually replace, what can be repaired, and what determines the choice in each case.

What we replace and what we restore in a Kirby

ComponentUsually replacedUsually repaired
Motor brushesWearNo
Attachment beltStretchingNo
ImpellerDamageContamination
Switch assemblyOpen circuitOxidized contacts
Hose adapterCrackLoose fit

Where to get Kirby parts and what it means for service

We source parts for the specific Kirby model: components differ in fit and specs across versions. The main attachment belt, impeller, and switch assembly may look similar on neighboring generations, but they differ in pulley diameter, blade geometry, and connector—a universal part won't sit right. Our technicians verify the part number against the housing and nameplate before replacement, not after. A part that doesn't match the model accelerates wear on nearby components: a misaligned drive belt strains the shaft bearing, and a wrong impeller changes airflow and loads the motor. For the same reason, a stretched attachment belt slips and reduces suction—it gets replaced, not tightened. That's why matching the model matters more than speed of replacement: it's cheaper to wait for the right part than to come back to the same component a month later.

Do you service Kirby shampoo models with a water filter

Yes, we service Kirby shampoo models with a water filter: we clean the system, check the shampoo belt, and fix leaks. In these versions, water passes through the tank and sprayer, so scale builds up on the tank walls, and moisture gradually reaches the drive element and shaft. The technician disassembles the unit, flushes the path, checks connection seals and the condition of the shampoo belt—a stretched belt slips and weakens the spray. We also inspect the tank seals separately: a cracked ring lets water reach nearby parts even after cleaning. The water filter needs regular service, otherwise moisture and scale spread to nearby components, and the smell returns after cleaning. In the city, a technician arrives within 60 minutes, diagnostics are free, and there's a 1-year warranty on labor and parts.

How Kirby vacuum repair works in Almaty

We walk you through the process from request to pickup: how free diagnostics work, how the cost is agreed upon, and what the warranty on completed work covers.

Free diagnostics and cost approval

Diagnostics are free, and the technician quotes the price after them, once the faulty unit and scope of work are clear. First, the engineer checks suction at the inlet and outlet, listens to the motor under load, inspects the brushes, turbine, and housing for cracks, and tests the wiring and switch. These measurements show exactly what failed: the motor winding, bearing, power switch, or a clogged airway. Then they explain which operations are needed and which parts will be replaced, and only after that quote the total for labor and parts. The cause is identified first, then repair is discussed—so you don't pay for work unrelated to the breakdown. You can decline the service at any stage, and diagnostics remain free. That's how Kirby vacuum repair in Almaty starts with precise diagnostics, not guesswork.

Repair at home or at the service center

A Tech Service technician arrives at your home within 60 minutes anywhere in the city, or repairs the vacuum at the service center if a more complex teardown is needed. The mobile specialist brings tools and fixes typical issues on site: replaces the belt, cleans the airway, checks contacts, adjusts the brushes, tightens the housing fasteners, and tests suction after reassembly. When motor overhaul, winding soldering, or bearing replacement is required, the unit is taken to the service center—there, disassembly happens on a workbench where it's easier to handle small components and keep parts organized. At-home visits are convenient for typical breakdowns, while units requiring full disassembly are repaired faster and more carefully at the service center. Before the visit, confirm the model—it helps the technician know which tools to bring and which housing fasteners to expect.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts, so after service you're covered if the unit acts up again. The same condition applies to both home visits and service center repairs: the replaced part and the replacement itself are covered equally, with no separation of "part separately, labor separately." The warranty covers both the part and the work, so it doesn't matter what failed—the replaced component or the replacement itself. If the vacuum misbehaves again during this period, the specialist returns and investigates the cause. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and warranty cases are handled without additional conditions for the owner. Keep the record of completed work—it makes it easier to confirm the date of your request.

Repair or a new vacuum, and how to choose a service provider

We help you decide whether to repair your Kirby or replace it with a new one, and explain how dealing directly with a service provider differs from using an intermediary or a general repair shop.

When Kirby repair is more cost-effective than buying new

Repair is usually more cost-effective when the breakdown involves a single component—brushes, belt, or power switch—and the housing and attachments are fine. Kirby upright vacuums are modular: the turbo brush, telescopic wand, bag, and motor unit are separate components, and replacing a consumable gets the machine working again without buying a new one. On models with a water filter, you also need to service the water tank and seals—their wear alone isn't a reason to replace the appliance; replacing the gaskets and rinsing the tank is enough. The motor's condition is assessed separately: if it runs smoothly and doesn't overheat, a major replacement isn't needed. In this case, Kirby vacuum repair in Almaty costs less than a new unit, and the decision should be based on the condition of several components at once: if only a consumable is worn, replacement is cheaper than a new machine, but if the motor and housing fail, the calculation is different.

Direct service provider or intermediary

Tech Service is the direct provider: your vacuum is serviced by our own technician, not by a third party that receives the request. Request intake, diagnostics, and work on a specific Kirby unit all go through one provider, so they see the service history and know which component has already been replaced. With an intermediary, you don't see who exactly works on the Kirby, while with a direct provider the technician is personally responsible for the result and the warranty. Our warranty is 1 year on labor and parts, diagnostics are free, and the technician arrives at your home within 60 minutes anywhere in the city. If a request is resold to a third party, warranty obligations get blurred between the dispatcher and the subcontractor — ask who will physically disassemble the unit.

How to choose a Kirby technician in Almaty

  • Experience specifically with Kirby: ask how many years the provider has worked with this brand, not with vacuums in general.
  • Free diagnostics: a no-cost check shows the service is confident in its work and doesn't charge for inspection.
  • Warranty on labor and parts: ours is 1 year, and it should cover both, not just the part.
  • Arrival speed: the technician arrives within 60 minutes anywhere in the city, with no multi-day wait.
  • Who will come: clarify whether the provider does the work themselves or passes the request to a subcontractor.
  • Team experience: our team includes technicians with 4 to 20 years of experience, and relevant experience matters more than overall tenure.

Key points on Kirby vacuum cleaner repair

We've gathered the key points that help a Kirby owner decide on restoring their equipment: from recognizing the symptom to choosing the component and the provider. Below are brief takeaways for each step.

  • Device and components: Kirby is an upright water-filter vacuum cleaner, and its components are serviced individually rather than by replacing the whole unit.
  • Symptom and cause: a symptom points to a likely component, but diagnostics confirm the exact cause — without it, it's easy to replace a working part.
  • Replacement and restoration: consumable parts are replaced, while some components are restored after inspection, so the decision is made based on the actual disassembly.
  • Repair or new unit: restoration is more cost-effective than a new vacuum when one component is worn out and the housing and motor are intact.
  • Choosing a technician: a Kirby specialist is more useful than a general "all brands" service — in terms of understanding components and the symptom map.

60brands

Besides Kirby, we repair other vacuum cleaner brands in Almaty

We repair Kirby and other vacuum brands that have dedicated pages on the site.

We also repairWe also repairTECH SERVICE09

Besides Kirby vacuum cleaner repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Kirby vacuum cleaner repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISЯYandex Maps
Send a review with photos on WhatsApp