experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, technicians with 4 to 20 years of experience.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and the components that most often cause them.
magnetron, diode, capacitor
from4 000 ₸
mica, waveguide contamination, coating
from3 000 ₸
fuse, switch, power supply
from2 500 ₸
fan, transformer, magnetron
from4 000 ₸
mica or displaced antenna
from3 000 ₸
capacitor breakdown, diode, transformer
from4 000 ₸
switches, hinges, latch
from4 000 ₸
motor, coupling, rollers
from3 500 ₸
The table shows what microwave repair costs in Almaty: a starting labor price without parts and the timeline; the technician confirms the total before any work begins.
1–2 hourstime
from 4 000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the oven's operation.
Describe the symptom and model — the technician will prepare for the visit.
The technician will arrange a convenient visit time and ask you to prepare the oven model for diagnostics.
The technician will agree on the scope of work and parts with you before starting the repair.
The technician performs the work on site; ask what will be needed when disassembling your model.
The technician demonstrates the result, and you accept the oven after checking.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Choose a convenient visit time and contact method — the technician will confirm the appointment and answer your questions. Ask the technician about a convenient time and payment method.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Ержан А.Order No. 2025-6043 · 18 November 2025
oursХотел сначала вызвать мастера на дом, потом передумал. Основная жалоба — не греет. Tech-service оказался ближе всех, за это и выбрал. Работает даже тише, чем до поломки.
Бекзат Т.Order No. ZK-2025/306 · 17 September 2025
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Я человек терпеливый, но тут уже думал всё. С чем пришёл: искрит. Дамир М взялся за то, от чего другие отказались. Заодно поменяли: трансформатор. Проверил дома — всё на месте, ничего не забыли.
Арман К.Order No. TS-5806 · 9 November 2024
oursДруг посоветовал, у него похожая история была. Починили и дали гарантию на месяц.
Марина В.Order No. 23039 · 24 October 2022
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Поломка застала врасплох: не крутится тарелка. Радик Т всё объяснил и не пытался впарить лишнее. Мастер показал, что меняет: двигатель. Вышло дешевле нового, что логично. Ответили быстро, не пришлось ждать на линии. Рекомендую. С тех пор ни разу не подвёл)
Татьяна Б.Order No. 2020-7052 · 14 October 2020
oursДруг посоветовал, у него похожая история была. Проблема — не греет. С тех пор ни разу не подвёл!!
Санжар О.Order No. ZK-2020/875 · 5 August 2020
oursЦена имела значение, но и гарантия тоже. Поломка застала врасплох: не греет. Дамир М всё объяснил и не пытался впарить лишнее. Поменяли: двигатель. Всё оформили по договору, с печатью. Сказали 12 000, я согласился без торга. На звонок ответили не с первого раза. Техсервис на Абая, если не ошибаюсь, — вот туда и поехал. Сделали аккуратно, следов разборки не видно.
Владимир Н.Order No. 65903 · 21 June 2020
oursДо этого обращался в другой сервис, там только развели руками. Настроение было испорчено конкретно. Симптом был очевидный: не крутится тарелка. Радик Т всё объяснил и не пытался впарить лишнее. В списке работ — двигатель. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Работает как раньше, придирок нет.
Айгерим Б.Order No. TS-2010-912 · 28 January 2020
oursХотел сначала вызвать мастера на дом, потом передумал. Симптом был очевидный: не греет. Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Проверили при мне, показали, что всё держит.
Дамир И.Order No. 250505 · 16 October 2019
oursСмотрел, у кого есть запчасти на такую модель. Повод для визита: не крутится тарелка. Вернули в тот же день, всё функционирует.
Руслан Д.Order No. TS-1826 · 17 September 2019
oursПробовал найти мастера в своём районе, но все были заняты. Основная жалоба — искрит. В тех сервис привёл знакомый, у него тут чинили ноут. Ребёнок уже проверил на прочность, держится.
Полина В.Order No. 61503 · 21 November 2018
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Повод для визита: не крутится тарелка. Второй месяц — полёт нормальный.
Индира П.Order No. 2018-7365 · 16 April 2018
oursОсновная жалоба — не греет. Отдельно скажу про мастера: Радик Т — спокойный, без лишней суеты. Работает как раньше, придирок нет!!
Алия Ш.Order No. ZK-3315 · 13 October 2017
oursНужен был счёт и чек, у нас техника на балансе организации. Привёз на диагностику: микроволновая печь. С чем пришёл: искрит. Приняли без очереди, оформили за пять минут. Цену обсудили до начала, сюрпризов не было. Вернули в тот же день, всё функционирует.
Алия Ш.Order No. TS-8157 · 9 September 2016
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Первое, что заметил: искрит. Проверили при мне, показали, что всё держит.
Сергей Р.Order No. TS-1602-689 · 15 April 2016
oursҚұрылғы ескі болғандықтан, бөлшек табыла ма деп қорықтым. Асығыс болмасам да, бір күнде бітіретінін айтты. Асыққан адамға ыңғайлы.
Алексей Г.Order No. 35582 · 16 January 2016
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Проблема — не греет. Tech-service оказался ближе всех, за это и выбрал. Сделали и забыл про проблему)
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost often the oven stops heating because of the magnetron, diode, or capacitor, and it sparks when the mica plate is damaged. Other issues happen too: it won't turn on, it's noisy, or the turntable won't spin. Free diagnostics will pinpoint the exact cause.
You can paint the outside of the case with heat-resistant enamel for home appliances, but the inside cavity can't be painted. If the interior coating is damaged, it's unsafe, and it's better to replace the part or have a technician look at it.
If the oven can't be repaired, take it to an electronics drop-off or recycling point. But first have a technician check it: sometimes the problem is fixed inexpensively and the appliance can still be used.
Yes, sparking can be caused by a damaged mica plate or burnt residue, and it's dangerous for the cavity and electronics. It's best not to turn the oven on and to call a technician to inspect it and replace the part.
Most likely one of the heating components has failed: the magnetron, high-voltage diode, or capacitor. The oven runs, but no microwaves are produced. A technician will check the circuit and replace the faulty part.
Yes, a technician will come to your home anywhere in the city and run free diagnostics. He'll fix most issues on the spot, and if a complex repair is needed, he'll take the appliance to the service center.
Tech Service repairs microwaves in Almaty at your home or in our service center: our technician arrives within 60 minutes anywhere in the city, diagnostics are free, and there's a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
Each symptom points to a specific component. Here's what's behind complaints like "won't heat," "sparks," and "won't turn on"—and what you can safely check yourself before the technician arrives.
If the light is on and the turntable spins but the food stays cold, the voltage doubler circuit has usually failed—the magnetron, high-voltage diode, or capacitor. The magnetron generates the microwaves that heat your food, while the diode and capacitor double the voltage so the tube can deliver power. When one part fails, the whole circuit breaks, so the appliance still looks like it's working: the fan hums, the timer counts down, and the light is on. Diagnostics here start with checking the high-voltage section under load, not the control board. If you'd rather not dig into the components yourself, our technician can repair your microwave at home after a free diagnostic. Before calling a technician, try a simple test: put a glass of water in and turn on the heat. If the water doesn't heat at all—not just weakly—that's a sign of a failed component, not a power setting issue.
Sparks are almost always caused by a burnt mica plate, grease residue, or metal cookware—and you shouldn't turn the appliance on until it's been checked. The mica plate protects the waveguide from grease and moisture, and the waveguide carries microwave energy from the magnetron into the cavity. When the plate burns through or gets soaked with grease, arcing strikes it and the waveguide wall. Another common cause is user error: foil, dishes with metal trim, or a fork or spoon left inside. A third scenario is carbon buildup around the cavity edges and on the rack. If sparks continue after cleaning the cavity and switching to glass cookware, the waveguide cover is the problem—it needs to be replaced, not patched, or the magnetron will fail next.
A complete lack of response usually points to the high-voltage fuse or the control board, while "heats the dish but not the food" is often caused by low mains voltage or old wiring. The high-voltage fuse blows first when the diode or capacitor fails and protects the rest of the circuit—replacing the fuse without checking the circuit will just blow it again. The control board handles commands from the panel, and its failure shows up in different ways: buttons don't respond, the display is dead, or the door doesn't start a cycle. Low mains voltage mimics a heating failure: the appliance hums but doesn't have enough power. Before taking the appliance to a service center, plug it into a different outlet in another room—if the picture is the same, the problem is in the appliance itself, not your home's wiring.
Most failures involve a handful of components. Here's what gets replaced and how it relates to the symptom you notice on the panel or inside the cavity.
We check the entire voltage doubler circuit one part at a time—the emitter, high-voltage diode, and capacitor—because their failures look the same from the outside, but each part is replaced differently. The magnetron generates microwaves, while the diode and capacitor double the voltage to power it: a failed diode or a capacitor that's lost its capacitance produces the same "light is on but food is cold" symptom as a burnt-out emitter. On callouts, the technician first tests the diode and capacitor, and only then checks the wave generator—this avoids unnecessarily replacing an expensive part. To avoid burning it out, don't run the microwave empty and don't heat dishes with metal trim—reflected energy goes back into the generator and shortens its life.
We restore the touch panel if the issue is with the contacts or the ribbon cable, and replace it entirely when the matrix itself is damaged — the decision depends on diagnostics. On models with touch controls, this panel is connected to the control board via a ribbon cable: oxidized contacts after wet cleaning cause dead zones, while a crack in the matrix leads to erratic touches or no response at all. The technician disassembles the unit, checks the ribbon and board traces, and only replaces the part if the matrix is confirmed faulty. If the touch panel gets stuck after a liquid spill, don't press it repeatedly hoping it will start working: moisture under the glass accelerates corrosion of the traces, and then board restoration will be added to the job.
| Symptom | Likely component | Technician's action |
|---|---|---|
| Not heating, light on | Magnetron, diode, capacitor | Checks the voltage doubler circuit, replaces the failed part |
| Sparking inside | Mica plate, waveguide | Replaces the protective cover, cleans the waveguide |
| Won't turn on | Fuse, control board | Checks the power circuit, repairs the board |
| Turntable not spinning | Turntable motor | Replaces the rotation motor |
| Touch not responding | Touch panel, ribbon cable | Repairs contacts or replaces the panel |
We can repair your appliance at your home or at our service center — the choice depends on the fault and the model. Here's how each format works and what happens step by step.
Our technician arrives at your home within 60 minutes anywhere in the city, performs free diagnostics, quotes the price, and after approval carries out the work on site. The mobile format covers most requests: replacing the magnetron, high-voltage diode, capacitor, and fuse, adjusting the door mechanism, and cleaning the cavity don't require transporting the appliance. The technician brings tools, so microwave service at home avoids the downtime of shipping it back and forth. Home microwave repair is also convenient because you don't have to take the appliance to the service center. Acceptance takes a few minutes: you check heating with a glass of water, no sparking, and smooth door operation. Another benefit is built-in models: they don't need to be removed from the niche if the fault doesn't require full disassembly. The mobile technician works on the control panel right in your kitchen, and complex boards are noted for the service center stage.
If the fault requires board soldering or replacing a component that can't be installed on site, we take the microwave to our service center and return it after repair. This scenario is typical for touch panels, control boards with burnt traces, transformers, and rare imported models where the part is matched to a specific part number. Some operations with the board and windings can't be done in your kitchen — they are performed at the service center. Drop-off and pickup are at the same address, and the 1-year warranty on labor and parts applies regardless of the format. The technician first confirms the diagnosis at your home so we don't take the appliance to the service center over a fuse or carbon buildup on the mica. For complex boards and rare models, the service center format saves time: you don't have to wait for a second visit with the needed part.
A signal on the display is a hint, not a verdict. We explain what common codes mean and how they relate to the components the technician checks first.
An error signal points to the component where protection tripped or a sensor activated, but only diagnostics reveals the exact cause — the same code can mean different things across brands. The display shows a conditional number stored in the control board: the manufacturer ties it to a specific circuit — temperature sensor, touch matrix, magnetron winding. So decoding from a single table without testing is misleading: E-24 on one model indicates a failed thermal sensor, while on another it signals a fault in its power circuit. The technician tests the component with a multimeter and cross-checks readings against the service documentation for the specific series, not a generic reference. Note the code and model before calling the technician: this pair makes it easier to prepare the needed part in advance and avoid a second visit.
| Code | Likely cause | What we check |
|---|---|---|
| SE | Touch panel or ribbon cable fault | Contacts and touch matrix |
| E-24 | Temperature sensor failure | Sensor and control circuit |
| E-1 / E-2 | Control board issue | Board and its power supply |
| Overheat code | Magnetron cooling fan | Fan and airflow |
| Lock code | Door latch mechanism | Door and latch |
When a signal appears, unplug the microwave, do not try to restart it repeatedly, and note the code — this speeds up diagnostics. Repeated switching cycles the protection and stresses the component that is already out of its operating range: the magnetron takes longer to heat up, contacts on the board burn. Just unplug it, let the cavity cool down, and do not touch the door until the technician arrives. We provide free diagnostics before restoration: the specialist opens the body, tests the circuit, and identifies the cause. If the error does not return after restarting but heating has become weaker, it does not mean there is no fault: the component may have gone into protection, but its resource is already reduced, and the failure will recur under load.
Cost depends on the component and model, and the warranty depends on what was replaced. We explain how the decision is made and when repair no longer makes sense.
The technician gives you the price after a free diagnostic. It depends on which component failed and which part is needed for your specific model. The technician quotes microwave repair prices in Almaty based on the inspection results. First we check the magnetron, high-voltage diode, capacitor, and control board, then match the findings with the symptom the owner described. The final amount consists of three parts: replacing the component, the part itself for your model, and the amount of disassembly required. On models with a touch panel, we also check the ribbon cable and board contacts—a separate operation that affects the total. After the diagnostic, you get a specific list of actions, not a vague range. Ask for the amount before work starts: that way you compare a specific scope for your breakdown, not an "average repair price."
How much microwave repair costs in Almaty is a question that can't be answered with a single number: two seemingly identical breakdowns are fixed with different replacements. If it doesn't heat, it could be the magnetron, diode, or capacitor—and each component requires its own operation. If it sparks, it's often the mica plate or a dirty cavity, and then the scope is smaller. We calculate the cost based on the actual check: the technician identifies the fault, selects the part, and only then names the amount. In our experience, the difference between a simple replacement and dealing with the control board is significant, so the "average city price" guideline rarely matches reality. Ask what exactly is included in the quoted amount—the replacement, the part, or both.
We provide a 1-year warranty on labor and a 1-year warranty on parts—if the fault returns after repair, we handle it under warranty. The term is the same for replacing the magnetron, diode, capacitor, and for control board operations: we install new components, not ones taken from other units. The warranty covers the component that was replaced, so keep in mind what exactly was repaired. Tech Service technicians have 4 to 20 years of experience, and repeat calls for the same component are a signal for us to recheck the entire heating chain, not just the replaced part. Keep the information about which component was replaced: on a repeat call, this speeds up the check and helps quickly determine whether the new symptom is related to the previous repair.
Repair stops making sense when several expensive components need replacing at once, or when the body and cavity are damaged so badly that restoration isn't justified. A magnetron plus a control board means two major replacements, and on a high-mileage unit they rarely pay off. The second red flag is a damaged cavity: chips, burnt coating, arcing marks on the walls. The third is a body that has warped or split at the seams after overheating. An honest guideline is to compare the scope of replacements with the appliance's remaining life: if the microwave is many years old and more than one component needs replacing, a new model may be the smarter choice. We're a direct service provider, not an aggregator, so we tell you this upfront, not after disassembly. If restoration isn't justified, the technician explains why and doesn't push the work: the decision stays with the owner.
You can book a technician to come to your home or bring the appliance to the service center. Here's how a home visit works, what to clarify when you book, and what to look for when choosing a service provider.
We take your request and a technician arrives at your home within 60 minutes anywhere in the city. Diagnostics are free, and the technician gives you the price on the spot after inspecting the appliance. Our mobile technicians work with both freestanding and built-in units, so you don't need to pull the appliance out of its niche beforehand. When you call, the dispatcher asks for your address, model, and symptom: not heating, sparking, not turning on, or showing an error code. Then we agree on a convenient time, and the specialist arrives with their own tools. Repairing microwaves at home covers most breakdowns, from the magnetron to the control panel. Our technicians have 4 to 20 years of experience with these appliances, so based on your description of the symptom they can often name the likely cause before the visit. If you need microwave repair near your address, describe the symptom and model when you request service: this helps the technician bring the likely parts and avoid a second visit.
A direct contractor sends their own technician and gives you the price after diagnostics, while an aggregator passes the request to a subcontractor and adds a markup. In practice, the difference shows up on the first call: with a middleman, the dispatcher doesn't know the microwave model and can't explain who exactly will come. A direct service answers the question about the technician specifically: experience, specialization, which components they repair. Another marker is the warranty: with a middleman, it's usually provided by the subcontractor, not by the service you contacted. People look for nearby service based on reviews on 2GIS and Google, but the listing doesn't show who does the work. Ask who exactly will come and whether the contractor provides a warranty on labor and parts. That immediately weeds out middlemen.
Here's a quick summary on microwave repair: what the symptoms mean, how to tell a simple mistake from a breakdown, and what to look for when choosing a contractor.
40brands
Our technicians work with appliances from various brands. Choose a brand to go to its page.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












