experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
The most frequent symptoms and their likely causes. The technician finds the exact cause during diagnostics.
Clog, filter, hose
from1 500 ₸
Cord, switch, motor
from2 500 ₸
Filter, ventilation, motor
from1 500 ₸
Motor brushes, wiring
from2 500 ₸
Bearings, impeller
from3 000 ₸
Thermal cutoff, control board
from7 000 ₸
Bag, cyclone, brushes
from3 000 ₸
Cord rewind mechanism
from2 500 ₸
The table shows vacuum cleaner repair costs: a starting labor price without parts and turnaround time; the technician will confirm the final amount with you before any repair begins.
1–3 business daystime
from 8 000 ₸cost

BeforeAfter5 steps

From request to final check — five steps.
Leave a request and describe the symptom and your vacuum cleaner model.
A technician arrives anywhere in the city within 60 minutes of your request.
The technician clarifies the scope of work, the part needed and a convenient time.
Work starts once the scope and the price are agreed.
You test the vacuum cleaner in every mode yourself before accepting the work.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Tell us what happened to your vacuum cleaner — we arrive within 60 minutes and find the cause of the fault free of charge.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Светлана Д.Order No. ZK-2025/235 · 20 August 2025
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Не люблю сервисы, но этот запомнил. Проблема — шумит. Рустем Т возился с этим дольше, чем планировал, но довёл до конца. Заявку приняли по телефону, перезвонили через десять минут. Запчасть была в наличии, доплачивать не пришлось. Починили и дали гарантию на месяц.
Томирис Ж.Order No. ZK-8598 · 22 May 2025
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Отдал мастеру: пылесос. Основная жалоба — шумит. Из деталей — двигатель. Нагрев в норме, посторонних звуков нет!!
Даулет С.Order No. ZK-2025/381 · 23 April 2025
oursСмотрел, у кого есть запчасти на такую модель. Заодно поменяли: шланг. Ребёнок уже проверил на прочность, держиться
Ержан А.Order No. ZK-5205 · 17 April 2025
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Больше всего напрягало: не включается. Tech-service оказался ближе всех, за это и выбрал. Крутит ровно, без рывков.
Алексей Г.Order No. 25570 · 13 November 2024
oursОсновная жалоба — не включается. Дамир М приехал в тот же день, хотя был конец смены. Нагрев в норме, посторонних звуков нет.
Анна Т.Order No. ZK-3408 · 18 May 2024
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Повод для визита: не включается. Вернули в тот же день, всё функционирует.
Аскар Ж.Order No. 35488 · 29 March 2024
oursДо этого обращался в другой сервис, там только развели руками. Проблема — не всасывает. Техсервис в Алматы, если что, вот их адрес — не пожалел. Сказать, что доволен — ничего не сказать.
Андрей П.Order No. TS-4997 · 28 December 2023
oursХотел сначала вызвать мастера на дом, потом передумал. Запчасть была в наличии, доплачивать не пришлось. Уже полгода — ни одного сбоя.
Талгат С.Order No. ZK-9595 · 22 December 2023
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Повод для визита: шумит. Проверил дома — всё на месте, ничего не забыли!!
Томирис Ж.Order No. 603271 · 10 November 2023
oursЖалоба простая: шумит. Дамир М честно сказал, что менять, а что ещё походит. Проверили на всех режимах, всё чётко.
Сауле Н.Order No. ZK-2022/567 · 17 August 2022
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Вечером включил — и всё стало ясно: не включаеться. Позвонили заранее, предупредили, что задержится на полчаса. Вышло дешевле нового, что логично. Заодно поменяли: шланг. Не пожалел ни разу. Сделали и забыл про проблему
Бакыт Ж.Order No. 2022-8882 · 15 August 2022
oursТехниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Күтуге уақытым жоқ еді, сол күні алып кеттім. Бәрі жақсы, шағымаймын.
Ринат Х.Order No. 229820 · 10 February 2022
oursПробовал найти мастера в своём районе, но все были заняты. Нужен был ремонт пылесоса — обратился сюда. Повод для визита: шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Гудит ровно, не греется, всё как надо.
Фарида К.Order No. ZK-2021/650 · 17 December 2021
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Привёз на диагностику: пылесос. Проблема — шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. По деньгам вышло адекватно, в другом месте просили больше. Мастер показал, что меняет: шланг. Мастер посмотрел, сказал, что возьмётся, и взялся. Если что — обращусь снова. Сделали и забыл про проблему.
Максат О.Order No. 984085 · 10 August 2021
oursДо этого обращался в другой сервис, там только развели руками. Записался на диагностику пылесоса. Проблема — шумит. Ни копейки сверху, как и обещали. Вернули в тот же день, всё функционирует
Айгуль К.Order No. ZK-2021/900 · 31 March 2021
oursЦена имела значение, но и гарантия тоже. После выходных обнаружил: не всасывает. Дамир М всё объяснил и не пытался впарить лишнее. Деталь на замену — двигатель. По цене не скажу, что дёшево, но справедливо. Мастер сам перезвонил, когда появилась запчасть. Сделали аккуратно, следов разборки не видно)
Индира П.Order No. TS-7580 · 17 January 2021
oursИскал мастерскую поближе к дому, чтобы не мотатся с техникой через полгорода. Включил, проверил, работает
Индира П.Order No. TS-2004-259 · 19 August 2020
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Руки чесались починить самому, хорошо, что не полез. С чем пришёл: шумит. Сравнивал с двумя другими — здесь вышло ровнее всех. Разобрали, посмотрели: шланг. Выбирал между парой сервисов, Tech-service взял адекватностью. Шум пропал, работает мягко.
Ирина Т.Order No. 31352 · 20 July 2019
oursПробовал найти мастера в своём районе, но все были заняты. Проблема — шумит. Внешне как новый, если не считать мелкой царапины.
Максим Ю.Order No. TS-9450 · 31 August 2017
oursТехника на гарантии уже не была, так что выбор был свободный. Ещё утром всё работало, а к вечеру — не всасывает. В списке работ — шланг. Заплатил 12 000, и не жалею. Объяснили по телефону, что можно не везти, но я всё равно привёз. Крутит ровно, без рывков.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost often, a vacuum cleaner stops suction due to a clog or a worn filter, won't turn on because of a faulty button or cord, and hums and overheats when the motor wears out. There are also breakdowns of the turbo brush and the cord rewind mechanism.
Humming without suction usually means a clog in the hose, pipe, or filter, less often worn motor brushes. Check the hose and container, and if suction doesn't return, you need diagnostics at a service center.
Turn off the vacuum cleaner immediately and don't turn it on until inspected: the burning smell is caused by motor overheating, brush sparking, or melted wiring. A technician will check the electrical parts and tell you what can be repaired.
Yes, in most cases the motor is repaired: brushes, bearings, or windings are replaced. If restoration is impossible, the technician will suggest a replacement, depending on the model.
Inspect the hose for cracks and clogs, check the hose for kinks and tight connections. If suction hasn't recovered, you need diagnostics at a service center.
Most often, the tank seals are damaged, the housing is cracked, or the drain valve is clogged. A technician will check the wet cleaning system and replace worn parts.
Vacuum cleaner repair in Almaty by Tech Service technicians is done at your home or in our service shop: a technician arrives within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. We fix corded, cordless stick and wet vacuums, quote the cost after diagnostics and accept payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies.
A vacuum cleaner has only a few main assemblies: the motor, the power circuit, the airflow path with its filters, and the brushes. Each symptom points to its own group of parts, so it is clear in advance where to start checking and which parts may be needed.
The heart of a corded vacuum is its universal brushed motor, so we start every vacuum cleaner repair in Almaty by checking its carbon brushes, commutator and impeller. The graphite brushes wear down gradually: the motor loses speed, starts to spark and smell of ozone, and when the wear is severe it only starts after a light tap on the housing. If the commutator is intact, replacing the brushes is enough; if the commutator segments are burnt or the winding has an inter-turn short, the motor is usually replaced as a whole. The impeller gets damaged by small hard objects that slip through a torn filter, which causes vibration and a metallic rattle. Our technicians tell brush wear from a burnt winding by sound and a resistance measurement, so a working motor is never replaced without need. Overheating from clogged filters speeds up brush wear, so when the brushes are replaced it makes sense to clean the filters and the airflow path as well. Sparks in the vent slots and an ozone smell in the first seconds of operation are a reason to switch the vacuum off until it is inspected, not to finish the cleaning first.
If the vacuum cleaner does not turn on at all and makes no sound, the cause lies in the power circuit — the plug, the cord, the contacts of the cord reel or the switch. The cord most often frays near the plug and where it leaves the housing, the places where it bends constantly, so power cutting out when you move the cable almost always means a broken wire inside. The slip contacts of the reel oxidize and burn over time, and then the vacuum turns on only every other time. When the cable stops rewinding or goes in with jerks, the reel's coil spring has usually weakened or snapped, while the brake pedal tends to jam with dust. The switch and the power control fail when their contacts burn: power jumps up and down, and the motor runs only at full speed. A cord with a cracked jacket should never be wrapped in electrical tape and used further — it is replaced entirely, because the break inside the insulation heats up and can short out.
| Symptom | Likely part | What we check first |
|---|---|---|
| Won't turn on, total silence | Cord, plug, switch | Power circuit continuity |
| Hums but pulls weakly | Filters, hose, dust container | Clogs and airtightness of the path |
| Sparks, smells of ozone | Carbon brushes | Brush wear and commutator |
| Shuts off after a few minutes | Thermal cutoff, clogged filter | Motor heating and filters |
| Cord won't rewind | Reel spring | Reel spring and brake |
| Turbo brush won't spin | Belt, brush motor | Tangled hair and drive |
| Battery drains fast | Battery, charger | Capacity and charging circuit |
The design defines the weak spots: a corded bag vacuum, a cordless stick vacuum and a wet vacuum break down in different ways, so troubleshooting starts with the parts typical for that type rather than with a general list of every possible fault.
In corded models with a bag or a cyclone container we usually find the cause of weak suction not in the motor but in the airflow path. An overfilled bag, a clogged pre-motor filter and a greasy HEPA filter at the exhaust all restrict the airflow: the motor hums louder and heats up, while the carpet stays dirty. In cyclone containers, suction drops because of cracks in the housing and hardened lid seals that let air leak in. Our vacuum cleaner service checks the path section by section: first without the floor head, then without the wand and the hose — this shows exactly where the clog sits. Bagged models need bags of the right size only: a poorly seated bag lets dust through to the motor filter and speeds up motor wear. If suction dropped right after you changed the bag, check that the frame is latched and that the inlet is not blocked by the flap — sometimes the power comes back without any repair at all.
The main weak spots of a cordless stick vacuum are the lithium-ion battery, the charging circuit and the motorized brush head. The battery loses capacity over time: a model that used to clean the whole apartment starts running flat long before the job is done, especially in maximum power mode. If the battery does not charge at all, the power adapter, the connector and the dock contacts are checked first, and only then the board and the battery itself. The motorized brush stops because of hair and threads wound around the roller, a worn belt or a failure of its own motor; the main motor keeps running meanwhile, and the owner only notices that debris stays on the floor. In some models the battery can be replaced only by opening the housing, and similar-looking packs differ in connectors and voltage, so buying a battery by guesswork from a photo is risky. A swollen battery must not be charged or opened at home: disconnect it from the charger and show it to a technician.
We repair wet vacuums and models with a water filter with water in mind: besides the motor, we check the pump, the tanks, the supply hoses and the seals. If a wet vacuum leaks from the bottom, the cause is usually a crack in the clean water tank, a loose clamp or a hardened gasket at a hose joint. When the cleaning solution stops reaching the floor head, the technician checks the pump, the spray button on the handle and the nozzle, which may be clogged with limescale. In models with a water filter, the water in the bowl traps dust, but when the bowl is overfilled or poorly assembled, moisture reaches the motor — deposits then form on the commutator and the bearings start to rust. After the repair, our technician fills the tanks and checks the joints for leaks before handing the vacuum back to the owner. After every wet cleaning, the tanks, bowl and filters are dried disassembled, otherwise moisture is drawn into the motor compartment and a musty smell appears inside.
Before the technician arrives, it helps to note how exactly the vacuum behaves: what sound appeared, what it smells like and after how long the change happens. These details noticeably shorten the search for the cause.
A burning smell is a signal to switch the vacuum off at once and pull the plug: this is how an overheated motor, scorched brushes or melted wire insulation smell. A hot plastic smell often comes from a motor that has run for a long time with a clogged filter, while a sharp burnt rubber smell comes from the belt of a turbo brush jammed with carpet fibers. A hot housing near the exhaust confirms overheating: the motor is not getting enough air for cooling. In such cases we check the filters and the airflow path first, then the winding and the commutator, to see whether the motor itself is affected. Vacuum cleaner repair stays inexpensive precisely when the vacuum was switched off at the first smell: often the job is limited to cleaning and new brushes. If you keep cleaning, the overheating spreads to the winding, and instead of the brushes the whole motor has to be replaced. New brushes or a new motor may give off a faint smell in the first minutes of operation, but it is weak, fades quickly and comes without a hot housing.
A vacuum cleaner that shuts off by itself after a few minutes and starts again once it cools down is usually protecting its motor from overheating with a thermal cutoff. The protection trips when the motor is short of air: the filter is clogged, the dust container is full or large debris is stuck in the hose. If the shutdowns continue after the airflow path is cleaned, the cause may lie in the motor itself — worn bearings and brushes increase the load and the heat. Less often the culprit is the thermal cutoff itself or a temperature sensor that trips too early, and in models with electronic controls, a board that loses contact as it warms up. A simple observation helps tell these cases apart: how long the vacuum runs before it shuts off, and whether it restarts immediately or only after a pause. Switching it on again and again right after the protection trips speeds up motor wear, so let the vacuum cool down completely and only then look for the cause.
The cost becomes clear only after the inspection, so it helps to know in advance what the technician checks, which work can conveniently be done on site and what makes up the final amount for labor and parts.
Our vacuum cleaner diagnostics are free and follow a set order: first the power circuit, then the motor, suction and filters, and finally the brushes, the cord reel and the electronics. The technician tests the cord and the switch with a multimeter, measures the motor winding resistance, inspects the carbon brushes and listens to the bearings at different speeds. Suction is checked at every section of the airflow path to tell a clog from motor wear. Cordless models also get a battery test under load and a check of the charging circuit, wet models a check of the pump and the joints. After the inspection the owner gets a clear conclusion: which part is faulty, what needs replacing and what can simply be cleaned. If there are several faults, the technician names them all at once rather than one by one during the repair. Before the inspection, tell the technician about every symptom you have noticed, even minor ones — for example, occasional clicks or a smell after long use: they help avoid missing a second fault that would show up later.
| Job | Where it is easier | Why |
|---|---|---|
| Cleaning filters and airflow path | At home | Disassembly without soldering is enough |
| Replacing the cord, plug or switch | At home | Parts are reachable once the cover is off |
| Replacing the carbon brushes | At home or in the shop | Depends on access to the motor |
| Replacing the motor | In the shop | Needs full disassembly of the housing |
| Replacing the cord reel | At home or in the shop | Depends on the housing design |
| Repairing the control board | In the shop | Needs soldering and a load test |
| Repairing a wet vacuum pump | In the shop | Needs a leak test |
The price of vacuum cleaner repair in Almaty depends on three things — the faulty part, the model and the spare part — so the technician names the amount after free diagnostics, not over the phone. Cleaning the airflow path and replacing the carbon brushes usually cost noticeably less than replacing the motor, the board or the battery of a stick model. The design also affects the total: in some vacuums the motor is reachable after removing a few screws, in others the housing is held by snap latches and needs careful disassembly. We name the amount before the work starts, and the owner decides whether to repair the vacuum or not. Whether an old vacuum is worth fixing is decided by comparing the cost of the work with the price of a new model of the same class. If the repair comes close to the cost of a new vacuum, the technician says so right after the inspection, so the owner can choose without extra expense.
When choosing a technician, a few things matter: who actually does the work, what the warranty covers, how fast the specialist gets to your apartment and how you can pay for the repair.
Tech Service works as a vacuum cleaner repair service with its own technicians, not as a middleman that passes the request on to someone else. Your vacuum is inspected and repaired by our specialist, so the description of the fault does not get lost along the chain, and the same service that took the request is responsible for the result. Our technicians have 4 to 20 years of experience, which is enough to handle corded, stick and wet models of many different designs. A middleman scheme adds a link that never holds the appliance in its hands: responsibility for a repeat fault gets split between the dispatcher and the contractor. For the owner, a direct provider is also convenient because warranty questions are solved in the same place where the repair was done. When you call, ask who exactly will come — a staff member of the service or an outside technician on referral — and the answer will show you right away whom you are dealing with.
We give a 1-year warranty on labor and parts for the work done and the parts installed. For the owner, this means we are responsible for both parts of the result: the quality of the assembly and the new part itself — brushes, cord, motor, battery or board. The split matters because a fault after a repair comes in two kinds: an assembly error shows up quickly, while a hidden defect in a part appears after weeks or months of use. One year is long enough for both causes to show themselves, even if you vacuum rarely. This is especially important for the motor and the battery, since the vacuum's performance depends on these parts most of all. Our diagnostics are free, so if an unusual sound appears after the repair, it is wiser to show the vacuum to a technician than to wait for the problem to grow. Write down which part was replaced and when the new symptom appeared: a precise description helps tell a repeat fault from a failure of another part faster.
A technician arrives within 60 minutes anywhere in the city, so vacuum cleaner repair in Almaty near your home does not require searching for a repair shop in your district or hauling the appliance through traffic. A home visit is especially handy for bulky models — wet vacuums with tanks and corded vacuums with a long hose that are awkward to carry. On site, the technician runs free diagnostics and names the cost, does the jobs that can be done at home right in front of the owner, and complex repairs are carried out in the service shop. You can pay for the work in whatever way suits you — Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. When leaving a request, describe the model and the symptom — this helps the technician understand in advance which part they will be dealing with. Before the visit, get all the attachments, the hose, the wand and the charger ready: without them some checks cannot be done, and the fault may be hiding in an accessory — for example, a cracked wand or the turbo brush.
Many repeat failures come from care rather than from part quality: a few simple habits noticeably extend the life of the motor, filters and cord, and keep the suction at the level it had right after the repair.
The hose and the cord wear out from kinks and jerks, so how long they last depends directly on how the vacuum is used and stored. The hose cracks where it bends all the time — at the inlet to the housing and near the handle, especially if the vacuum is pulled around the apartment by the hose or stored with the hose twisted around the body. The cord gets damaged when it is yanked out of the socket, run over by the wheels or rewound with a knot: the reel winds a twisted cable unevenly, and the spring works under overload. It is best to store the vacuum in a dry place, away from radiators, with the wand detached and the hose laid loosely. Cordless models should not be left fully discharged for months: a lithium-ion battery loses capacity faster that way. When rewinding the cord, hold the plug with your hand — this way it does not hit the housing or break the contacts, and the cable winds onto the reel evenly.
A vacuum cleaner is simpler than many other household appliances, but finding the cause still takes a consistent approach: from symptom to part, from a simple check to a complex one, from inspection to the decision to repair.
60brands
Our technicians work with many household appliance brands. The brands that have their own pages are listed below.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












