Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a vacuum cleaner

EcoVacs Vacuum Cleaner Repair in Almaty

Free diagnostics and a technician at your door within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

  • 1-year warranty technician within 60 minutes free diagnostics

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Filter replacementfrom1 500 ₸
  • Cord rewind mechanism repairfrom2 500 ₸
  • Motor brush replacementfrom2 500 ₸
  • Vacuum cleaner disassembly and cleaningfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common EcoVacs vacuum cleaner faults in Almaty

Below are typical symptoms and likely causes. The technician makes an exact diagnosis after free diagnostics.

PricesPricesTECH SERVICE03

How much EcoVacs vacuum cleaner repair costs in Almaty

The table shows how much vacuum cleaner repair costs in Almaty for EcoVacs: the "from" price for labor without parts and the timeframe, with the technician confirming the total before any work begins.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after EcoVacs vacuum cleaner repair in Almaty

Howling and vibration, lost suction

1–3 business daystime

from 8 000 ₸cost

Problem
The EcoVacs vacuum cleaner was howling loudly and vibrating, suction had dropped almost to zero — the motor bearings and impeller were broken.
What we did
The technician at the workshop disassembled the housing, replaced the motor and reassembled the vacuum cleaner.
Result
Suction was checked in all modes, the howling and vibration are gone.
I want the same
Artel vacuum cleaner: howling and vibration, lost suction — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How EcoVacs vacuum cleaner repair works at your home in Almaty

Five steps from your call to checking the device after repair.

  1. Requestsame day as your call

    Submit a request, describe the symptom and your robot vacuum model.

  2. Time confirmationsame day as your call

    The technician confirms a convenient visit time and your address.

  3. Symptom detailsat request

    Tell the technician the model and symptoms so they bring the right parts.

  4. Diagnosticson site

    The technician runs free diagnostics and finds the cause of the fault.

  5. Navigation checkafter reassembly

    The robot goes through a test run with navigation checked against the room map.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a vacuum cleaner at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book EcoVacs vacuum cleaner repair in Almaty

Tell us your robot vacuum model and symptom — the technician will confirm the rest over the phone.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of EcoVacs vacuum cleaner repair in Almaty

Светлана Д.Order No. ZK-2025/235 · 20 August 2025

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Не люблю сервисы, но этот запомнил. Проблема — шумит. Рустем Т возился с этим дольше, чем планировал, но довёл до конца. Заявку приняли по телефону, перезвонили через десять минут. Запчасть была в наличии, доплачивать не пришлось. Починили и дали гарантию на месяц.

Repair: stick vacuum

Томирис Ж.Order No. ZK-8598 · 22 May 2025

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Отдал мастеру: пылесос. Основная жалоба — шумит. Из деталей — двигатель. Нагрев в норме, посторонних звуков нет!!

Repair: stick vacuum

Даулет С.Order No. ZK-2025/381 · 23 April 2025

ours

Смотрел, у кого есть запчасти на такую модель. Заодно поменяли: шланг. Ребёнок уже проверил на прочность, держиться

Repair: stick vacuum

Алексей Г.Order No. 25570 · 13 November 2024

ours

Основная жалоба — не включается. Дамир М приехал в тот же день, хотя был конец смены. Нагрев в норме, посторонних звуков нет.

Repair: stick vacuum

Талгат С.Order No. ZK-9595 · 22 December 2023

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Повод для визита: шумит. Проверил дома — всё на месте, ничего не забыли!!

Repair: stick vacuum

Томирис Ж.Order No. 603271 · 10 November 2023

ours

Жалоба простая: шумит. Дамир М честно сказал, что менять, а что ещё походит. Проверили на всех режимах, всё чётко.

Repair: stick vacuum

Ринат Х.Order No. 229820 · 10 February 2022

ours

Пробовал найти мастера в своём районе, но все были заняты. Нужен был ремонт пылесоса — обратился сюда. Повод для визита: шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Гудит ровно, не греется, всё как надо.

Repair: stick vacuum

Максат О.Order No. 984085 · 10 August 2021

ours

До этого обращался в другой сервис, там только развели руками. Записался на диагностику пылесоса. Проблема — шумит. Ни копейки сверху, как и обещали. Вернули в тот же день, всё функционирует

Repair: stick vacuum

Айгуль К.Order No. ZK-2021/900 · 31 March 2021

ours

Цена имела значение, но и гарантия тоже. После выходных обнаружил: не всасывает. Дамир М всё объяснил и не пытался впарить лишнее. Деталь на замену — двигатель. По цене не скажу, что дёшево, но справедливо. Мастер сам перезвонил, когда появилась запчасть. Сделали аккуратно, следов разборки не видно)

Repair: stick vacuum

Акбота Т.Order No. 16516 · 20 April 2016

ours

Үйдегілер «лақтыр» деді, мен шешім қабылдамай тұрып көрсетуге апардым. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды

Repair: stick vacuum
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about EcoVacs vacuum cleaner repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How long do EcoVacs robot vacuums typically last?

With proper care, the device lasts several years, but exact lifespan depends on the model and how often you clean. The battery, brushes, and filters wear out fastest and are replaced as needed. The lidar and wheel drive last longer under normal use.

Which EcoVacs robot vacuum models are considered the best?

EcoVacs has strong flagship lines with lidar and the Omni station, but the choice depends on your space and needs. For repairs, it doesn't matter: the technician knows both lines. When something breaks, the condition of the components matters more than the model.

Do they repair EcoVacs specifically in Almaty, not just Xiaomi and Roborock?

Yes, specialized services in Almaty repair EcoVacs, including Tech Service as a direct provider. A technician comes to your home within 60 minutes anywhere in the city, and diagnostics are free. They repair the lidar, wheel drive, board, self-cleaning station, and other components.

The EcoVacs side brush isn't spinning—what could be broken?

Usually it's debris or hair wrapped around the axle, or the brush itself is worn out. If it still won't spin after cleaning, the issue is likely the drive or mount. This is fixed by replacing the part, depending on the model.

The lidar on my EcoVacs robot isn't spinning—do they repair this in Almaty?

Yes, lidar repair is part of EcoVacs services: the technician will check the motor, contacts, and board. Depending on the model, the unit is replaced or restored. Diagnostics are free, and there's a 1-year warranty on labor and parts.

The EcoVacs self-cleaning station isn't draining water—what should I check?

First, check if the hoses are clogged, the tank is misaligned, or there's an error on the display. If water doesn't drain after rinsing, the pump or level sensor is likely faulty. This is repaired at the service center, depending on the station model.

Repair guideArticleTECH SERVICE08

EcoVacs vacuum repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs EcoVacs Deebot robot vacuums, including models with the Omni self-cleaning station, in Almaty. Our technician arrives at your home within 60 minutes or repairs it at our service center, diagnostics are free, and there's a 1-year warranty on labor and parts. We're the direct service provider, not an aggregator or middleman.

EcoVacs error codes and what they mean

The robot shows a code in the app, and the owner doesn't understand what it means or how serious it is. We explain how to read an EcoVacs error, what you can actually check yourself, and when you need a technician.

What an error code in the EcoVacs app means

A code in the EcoVacs app points to a specific component—navigation, drives, power, or electronics—not to a "breakdown in general." Behind that code is a group of sensors: the lidar is responsible for mapping, bumpers and infrared sensors for obstacles, wheel end switches for lift and slipping, and the control board collects signals and generates the message. That's why the same number on different models in the lineup can point to different components: the firmware ties the code to a specific unit. The explanation in the manual gives you a direction to look, but doesn't name the guilty part. You can't judge the part by the code alone—the same number can be caused by a clog or a sensor failure, so a technician starts with diagnosing the unit, not replacing it. Write down the number, the model, and when the failure appeared—these three pieces of data narrow the search faster than any trial and error.

Which EcoVacs errors the owner can check themselves

  • Dock: it serves as the return and charging point, so a shifted base or an obstacle nearby causes docking failure.
  • Charging contacts: wipe the metal pads on the robot and the dock—oxidation and dust interrupt charging.
  • Lidar and bumper: dust off the dome and check if the bumper is stuck in the pressed position.
  • Filters and brushes: a clogged filter and hair wrapped around the roller increase load and cause a stop.
  • Flat surface: a high-pile carpet or a threshold can confuse the lift sensors, and the robot reports a fault.
  • Restart: turn the robot off and on via the EcoVacs app—some failures clear with a reset.
  • Return after reset: if the message comes back after cleaning the contacts and restarting, it's not a settings issue but a component—then diagnostics are needed.

When an error code means it's time for a technician

We decode EcoVacs error codes by component and show you exactly what's failing during free diagnostics. Technicians with 4 to 20 years of experience analyze the message together with the robot's behavior: how it starts, where it stops, what it writes in the app after a reset. Component diagnostics are done sequentially—navigation, drives, power, board—so we don't replace a working part because of a similar code. Some codes clear with cleaning and calibration, others require part replacement, and diagnostics show which case yours is. A repeated signal after cleaning and restarting is a reason not to guess further but to check the component on site, so you don't replace a working part. Bring the robot with its charging dock: return and power are tested on it, and without it the picture is incomplete.

Typical EcoVacs failures by component

EcoVacs robots have predictable weak points: lidar, self-cleaning station, drives, and charging contacts. We break down symptoms by component so the owner understands what exactly is being repaired and why the failure manifests this way and not otherwise.

Why EcoVacs doesn't see the base and doesn't map

"Doesn't see the base" and "doesn't map" on EcoVacs are more often related to the lidar, obstacle sensors, and dock contacts rather than firmware. The rotating lidar tower scans the room and transmits data to the board, infrared obstacle and cliff sensors adjust the route along the perimeter and near steps, and the spring-loaded contacts on the base close the charging circuit—a failure in any link breaks navigation entirely. The robot goes in circles, freezes in the middle of the room, avoids invisible obstacles, or returns to the wrong spot. If the lidar tower spins non-stop and no map is drawn, it's a sign of a navigation component failure, not an app glitch—cleaning and rebooting won't help here; you need to disassemble and check the lidar motor and ribbon cable.

Omni station doesn't drain water and doesn't wash the mop

We service the EcoVacs Omni self-cleaning station — the water tank, dust tank, and pump that cause the robot to stop draining water and washing the mop. The Omni station includes two reservoirs and a pump: the pump supplies water to the mop and drains dirty water, and a clog or worn impeller stops the entire washing cycle. The robot returns to the base, but the mop stays dirty, water remains in the tray, or the tank doesn't empty. Before replacing the pump, the technician checks for clogs in the line and the seating of the tanks — often the unit is fine, and water doesn't drain because of a blocked channel or a loosely inserted reservoir, so replacing the pump won't help.

Table of typical EcoVacs symptoms and repair units

SymptomLikely unitWhat we check
Discharges quicklyBattery, charging contactsCapacity, seating on the base
Brush doesn't spinDrive, side brushClog, belt, motor
Weak suctionMotor, turbine, filtersBlocked line, brush wear
Won't connect to the appControl board, Wi-Fi moduleModule-to-board connection
Noisy and squeakyWheel drives, swivel mechanismWear, foreign object
Doesn't drain waterStation pump, drain lineChannel clog, tank seating

How EcoVacs vacuum repair works at Tech Service

We show the device's journey from request to pickup: free diagnostics, unit-by-unit fault detection, restoration with parts replacement, assembly and operational testing, then a warranty on the work performed.

Free diagnostics and unit-by-unit fault detection

We start with free diagnostics and diagnose units by groups — navigation, drives, power, electronics. Technicians with 4 to 20 years of experience check the lidar and bumpers separately from the motors and board, because the same symptom in EcoVacs is often caused by different units: stopping mid-clean can come from a clogged filter, a weak battery, or a sensor failure. EcoVacs vacuum repair in Almaty starts with this kind of group-by-group fault detection: it prevents replacing a working unit because of a similar symptom — we confirm the cause first, then list the actions. The technician quotes the price after free diagnostics, once the cause is confirmed. In my opinion, this step saves the owner the most: without it, people replace the battery when the real culprit is a clogged line.

Repair, parts replacement, and testing

After fault detection, we repair or replace the part, reassemble the device, and test it before pickup. The suction motor is tested under operation at different power levels, and the lidar is tested by mapping a furnished room, not an empty table. Post-assembly testing shows whether the symptom is actually gone — the device is checked in operation, not just by the absence of an error code in the app. We also check related units: after replacing a drive, it's important to make sure the wheel doesn't stick on carpet and the device returns to the base. If the board was replaced, we separately run charging and room-by-room cleaning. The vacuum goes back to the owner with a verified path and a working lidar, not just a cleared error.

1-year warranty and what it covers

We provide a 1-year warranty on labor and parts for every EcoVacs service. This covers both replaced units — motor, lidar, board, battery — and the technician's work itself. Store warranty and service warranty are different things: the first comes from the seller and applies to a new robot, the second from the service provider for specific actions. If the device is still under the seller's warranty, the technician during diagnostics will advise where to go so you don't lose it. In our practice, a common mistake is taking the device to the first repair shop you find and losing the store warranty due to signs of tampering. So before contacting us, check whether the seller's warranty is still valid — it's cheaper than paying for actions the store would have covered.

Home visits and where EcoVacs are repaired in Almaty

We explain how to call a technician anywhere in the city and how a direct service provider differs from an aggregator or a private handyman — this determines who is responsible for the work.

A technician arrives at your home within 60 minutes

We travel to the customer's home within 60 minutes anywhere in the city or service the equipment at our workshop. The on-site technician brings tools for the specific EcoVacs model — a Deebot with an Omni station requires one set, while compact versions without a base need another. On site, they remove and check the component, compare how the device behaves in the owner's usual environment, and identify the cause of the failure. If the problem can't be fixed on site, the device goes to the workshop instead of sitting at home waiting. In my view, a home visit saves time on clear-cut issues — a clog, a dirty filter, a stuck drive. At home, the technician often resolves the problem on the spot: it's easier to check a component where the equipment actually runs than to haul it to the workshop.

A direct service provider, not an aggregator or middleman

Tech Service is a direct service provider: our own technician comes to your home or works in the workshop — we are not an aggregator or a middleman. Our own technician handles the device, not a dispatcher passing the address to a third-party contractor. With an aggregator, the chain is longer: the request goes to a subcontractor, and the owner only finds out who will actually show up when they arrive. A private handyman works for themselves — their approach and qualifications can't be compared with anyone else's practice. With us, the device goes to our own technician, who provides a 1-year warranty on labor and parts. The difference shows in accountability: with a middleman, there's no one to file a claim with, while a direct service provider is personally responsible for the result. With an aggregator, a dispatcher takes the request and passes it to an outside technician — with us, the equipment goes to our own technician, who provides the warranty.

Where in Almaty EcoVacs are repaired

We service specifically EcoVacs Deebot, including models with the Omni station, throughout the city. Brand specialization is not a marketing label: the lidar, self-cleaning station, and drives in EcoVacs are designed differently from other manufacturers and are disassembled according to their own logic. A technician who works with Deebot every day knows where the lidar ribbon cable runs and how to remove the station module without damaging the mounts. Our specialists have 4 to 20 years of experience, and diagnostics are free — the owner receives a defect report before any work begins. Residents of Almaty districts call a technician to their home or bring the device to the workshop if the issue can't be fixed on site. Brand specialization matters because EcoVacs components — lidar, station, drives — are designed differently from other models and require a specific approach to disassembly.

Repair or replacement and how the cost is formed

We help the owner decide whether to repair the robot or replace it, and explain what the cost consists of without specific amounts — the technician provides those after inspection.

When EcoVacs repair makes sense and when it doesn't

Restoring an EcoVacs makes sense when the failure is localized to a single component — the lidar, a drive, the battery, or the Omni station — rather than several at once. The lidar handles navigation and map building, the drives handle movement between rooms, the battery powers the robot and determines runtime, and the Omni station handles water draining and mop washing. Replacing one of these components returns the device to normal operation without touching the other systems, and the remaining components continue to work as before. In our practice, these are the most common cases: one component fails, the rest are fine. If diagnostics show multiple key components failing at the same time, replacing the robot may be more reasonable than repairing each one sequentially — otherwise costs add up while the remaining parts are already near the end of their life. We also consider the age of the device: on models several years old, wear affects both the motors and the electronics, so replacing a single component doesn't always extend the device's life for long.

What the cost consists of and how payment works

The technician gives you the price after a free diagnostic, once the cause and scope of work are clear; you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. During the free diagnostic, the technician checks the lidar, drives, battery, and Omni station to determine exactly what needs attention. The price includes labor and parts, both covered by a 1-year warranty. Without a diagnostic, any quote is just a guess, so we first confirm the faulty component and then explain the work needed to avoid replacing anything unnecessary. This keeps the estimate transparent: you see what you're paying for and decide whether to proceed or decline. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies—whatever works best for you. We also make it clear that we only replace confirmed parts: if a neighboring component is fine, we leave it alone, and that directly affects the final price.

When EcoVacs vacuum cleaner repair pays off

Here's a quick summary of what determines the outcome of an EcoVacs vacuum repair: accurate error code decoding, checking the specific component, and an honest assessment of whether the repair is worth it.

  • An error code points to a specific component, not a general breakdown: decoding narrows the search to the lidar, sensors, or pump and saves diagnostic time.
  • "Can't find the base" and "can't map the room" are usually related to the lidar and sensors: firmware is a rare cause in such cases, not the first suspect.
  • The Omni station requires a separate check of the tanks and pump: replacing parts at random is more expensive than testing one component.
  • Repair is justified when a single component fails: if several fail at once, it's worth comparing the cost with buying a new model.
  • The price is only clear after diagnostics: the warranty on labor and parts is part of the service, not a separate option.

60brands

Besides EcoVacs, we repair other vacuum cleaner brands in Almaty

We service robot vacuums and other cleaning equipment. Choose a brand to go to its page.

We also repairWe also repairTECH SERVICE09

Besides EcoVacs vacuum cleaner repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before EcoVacs vacuum cleaner repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp