Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a boiler and water heater

Boiler and Water Heater Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • 4 to 20 years of experience we accept Kaspi QR, Kaspi Red, card, cash or bank transfer

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Check valve replacementfrom2 500 ₸
  • Safety valve replacementfrom3 500 ₸
  • Temperature sensor replacementfrom3 500 ₸
  • Power cord replacementfrom4 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common water heater faults in Almaty

The symptom points to a component, but the technician determines the exact cause after free diagnostics. Below are typical combinations.

PricesPricesTECH SERVICE03

How much water heater repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Check valve replacementparts not included

1–2 hours

from2 500 ₸

Safety valve replacementparts not included

1–2 hours

from3 500 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Power cord replacementparts not included

1–2 hours

from4 000 ₸

Magnesium anode replacementparts not included

1–3 hours

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after water heater repair in Almaty

Leak along tank seam

1 visittime

from 5,500 ₸cost

Problem
The water heater leaked along the welded seam of the tank: rusty streaks appeared on the metal, and a puddle collected under the body.
What we did
The technician drained the water, removed the tank, cleaned the seam of corrosion, sealed it, and checked the joint under pressure.
Result
The seam is dry and sealed, the surface is clean, and water does not seep. 1-year warranty on labor and parts.
I want the same
Water heater: leak along tank seam — before repairWater heater: leak along tank seam — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How water heater repair works at your home in Almaty

Five steps from request to checking the work. Diagnostics are free.

  1. Requestsame day

    Submit a request and a technician will arrive within 60 minutes anywhere in the city.

  2. Preparationbefore repair

    The technician brings tools and supplies and prepares the area for safe work.

  3. Approval of workafter inspection

    You approve the scope of work and the cost of parts.

  4. Repairafter

    The technician performs the work and checks for leaks and proper heating.

  5. What to ask the technicianafter repair

    Ask about documents, return of the old part, and further operating instructions.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book water heater repair in Almaty

Provide your boiler model and describe the symptom — the technician will calculate the cost of work for your model.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE06

Reviews of water heater repair in Almaty

Серик М.Order No. ZK-2026/649 · 5 June 2026

ours

С чем пришёл: течёт. Никита М снял деталь, показал износ, вопросов не осталось. Работает как раньше, придирок нет.

Repair: water heater

Ксения И.Order No. ZK-2026/250 · 27 April 2026

ours

Жалоба простая: не греет. Отдельно спосибо мастеру — Никита М, терпения ему хватило. Включил, проверил, работает

Repair: water heater

Елдос К.Order No. TS-3590 · 12 April 2026

ours

Друг посоветовал, у него похожая история была. Сначала думал, что ерунда, но появилось: выбивает. Заявку приняли по телефону, перезвонили через десять минут. Деталь на замену — тэн. Смета совпала с итогом, что редкость. Ставлю пятёрку. Проверил дома — всё на месте, ничего не забыли.

Repair: water heater

Павел Ш.Order No. 2026-5745 · 9 February 2026

ours

Нужен был счёт и чек, у нас техника на балансе организации. Не люблю сервисы, но этот запомнил. Первое, что заметил: течёт. Даже с учётом запчасти вышло гуманно. Нужна была замена: тэн. Договорились на утро, к девяти уже был свободный мастер. В общем, доволен. Проверил дома — всё на месте, ничего не забыли.

Repair: water heater

Татьяна Б.Order No. TS-5492 · 22 July 2025

ours

Жалоба простая: выбивает. Дамир М взялся за то, от чего другие отказались. Уже полгода — ни одного сбоя)

Repair: water heater

Зарина Ш.Order No. ZK-5811 · 15 March 2025

ours

Смотрел, у кого есть запчасти на такую модель. Настроения писать не было, но пусть будет. Симптом был очевидный: не греет. Из деталей — термостат. Могли бы взять больше, но взяли по-божески. Приняли без предоплаты, это подкупило. Включил, проверил, работает.

Repair: water heater

Игорь Щ.Order No. ZK-2024/840 · 30 December 2024

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Сначала сомневался, мало ли что. Проблема — течёт. Позвонили заранее, предупредили, что задержиться на полчаса. Работает даже тише, чем до поломки

Repair: water heater

Камила А.Order No. 2024-7061 · 16 September 2024

ours

Позвонил в три места, здесь единственные назвали цену сразу. Вечером включил — и всё стало ясно: не греет. Дамир М взялся за то, от чего другие отказались. Из деталей — тэн. Крутит ровно, без рывков.

Repair: water heater

Талгат С.Order No. ZK-2024/687 · 31 May 2024

ours

Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Работает как раньше, придирок нет.

Repair: water heater

Александра Н.Order No. ZK-8643 · 25 April 2024

ours

Нужен был счёт и чек, у нас техника на балансе организации. Поломка застала врасплох: течёт. Заявку приняли по телефону, перезвонили через десять минут. Ни копейки сверху, как и обещали. Поставили новую деталь: тэн. Сделали и забыл про проблему.

Repair: water heater
Questions and answersQuestionsTECH SERVICE07

Questions about water heater repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why do water heaters in Almaty break down more often because of the water, and what can be done about it?

Almaty's water has a lot of hardness salts, so scale builds up faster on the heating element, and the magnesium anode wears out sooner than expected. Regular tank cleaning and anode replacement help — how often depends on the model and water hardness.

How can you tell if the heating element is covered in scale, and can it be fixed without replacing it?

Signs include noise and crackling during heating, slow heating, and the safety cut-off tripping. Scale is removed during tank cleaning, but if the heating element is already damaged or shorted, it needs to be replaced — the technician decides during inspection.

Can a tankless water heater be repaired, or is it easier to replace?

Most often a tankless water heater can be repaired: the heating element, thermostat, or flow sensor is replaced if the housing is intact. Replacement makes more sense if the tank is cracked or corroded — the technician will advise after free diagnostics.

What should I do if the water heater leaks at night?

Cut the power to the water heater and shut off the water supply at the tank inlet, then mop up the water from the floor. Book a service call — a technician will come to your home and find the cause of the leak after free diagnostics.

The water heater trips the breaker in the panel when heating — is it the heating element or the wiring?

The cause could be a shorted heating element, a faulty thermostat, or loose wiring connections — it depends on the model. The technician will pinpoint the cause during inspection, and until then it's best not to use the appliance.

How long is the warranty on water heater repair?

We provide a 1-year warranty on labor and parts. If a fault caused by our work appears during this period, the technician will sort it out — warranty terms depend on the specific case.

Repair guideArticleTECH SERVICE08

Boiler repair in Almaty by Tech Service with home visits

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs storage and tankless water heaters and gas water heaters in Almaty. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and we agree on the work after diagnostics. We provide a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience.

Why the boiler doesn't heat, leaks, or trips the breaker

A symptom alone doesn't name the fault — the same complaint can come from different components. Let's look at three common scenarios and what's behind them.

The boiler turns on but the water stays cold

Most often the culprit is a heating element covered in scale or burned out, or a thermostat that isn't sending the command to heat. Scale on the coil acts like a blanket: a layer just a couple of millimeters thick reduces heat transfer, the water takes longer to heat and stops reaching the set temperature, and the element itself overheats and breaks. The thermostat regulates heating based on the temperature sensor readings — if the sensor is off or the contact is burned, the command to the coil doesn't arrive. We start by measuring the heating element's resistance and testing the thermostat circuit: this way the cause is visible without disassembling the tank. If the heating indicator is on but the water in the tank is cold, it's almost always the heating element; if the indicator is off, we check the thermostat and temperature sensor. On models with electronic controls, there's also a control board, and diagnostics should start there — it saves time and preserves the seals.

Water leaks from the boiler

Leaks almost always come from three places — the safety valve, the flange seals, or the tank body, and the location determines whether the component can be repaired or needs replacement. The safety valve is responsible for pressure relief: when the water in the tank heats up and expands, the excess drains out, and drops under the valve during heating are normal relief, not a tank failure. It's a different story when there's moisture on the body and a rusty trace along the seam: that's corrosion from the inside, and seals won't help here. Gaskets and the flange wear out over time and with hard water, so water seeps along the joint rather than pouring out. Before disassembling the unit, wipe the body dry and see where the first drop appears — this immediately narrows down the causes and saves you from unnecessary disassembly.

The breaker trips and an error code appears

The breaker trips due to current leakage on the heating element or wiring overload, and the error code on the display points to a specific component — sensor, thermostat, or heating element. An RCD trips when there's current leakage: a punctured coil and moisture on contacts cause leakage, and the protection cuts power to the line before a regular breaker would trip. The error code narrows the search — it immediately shows the technician which component to check, so don't reset it by restarting. Don't replace the breaker with a more powerful one just to stop the tripping — that removes the protection, not the cause; it's better to photograph the error code before the technician arrives and unplug the unit from the mains. The list of common codes differs between storage and tankless models, and during diagnostics we check it against the specific manufacturer's table — this way the cause is found faster and without replacing working parts.

How repair differs for storage, tankless water heaters, and gas water heaters

The three types have different designs, so diagnostics also proceed differently. Below is what exactly differs in the work and what we check first.

Storage boiler and its weak points

In a storage boiler, the heating element, magnesium anode, and safety valve most often fail, and the tank suffers from corrosion when the anode is worn out. Our technician starts by checking the heating element: scale on the coil reduces heating and increases electricity consumption, and insulation breakdown causes current leakage to the body. The magnesium rod protects the steel tank from corrosion — it depletes gradually and breaks down faster than the heating element itself. The safety valve relieves excess pressure during heating; if it's clogged with scale, the tank and gaskets get extra stress. The tank is the most expensive component, and its condition determines whether restoration makes sense at all. The anode depletes faster than the heating element and is replaced preventively — if you wait until it leaks, repair won't help anymore.

Tankless water heater and gas water heater

Tankless water heaters and gas water heaters have no storage tank — water is heated as it flows, so diagnostics focus on the heating element, flow sensors, and control board. In a tankless unit, the technician checks the heating coil, flow sensor, and power relay: with low water pressure, the water either doesn't heat or the unit shuts off by itself. In a gas water heater, you also have the ignition system — the piezo igniter, electrode, flame sensor, and draft sensor; scale buildup on the heat exchanger reduces heating and causes popping sounds when igniting. We service both types at your home and in our workshop, and a technician arrives anywhere in the city within 60 minutes. Tankless units are more repairable than they seem: if the casing is intact but heating is poor, the issue is usually the heating element or sensor, not a "disposable" appliance.

Comparing repair by type

Appliance typeWhat we check firstWhere we repair
Storage water heaterHeating element, magnesium anode, safety valve, tankAt your home or in our workshop
Tankless water heaterHeating element, flow sensor, control boardAt your home or in our workshop
Gas water heaterHeating element, sensors, ignition systemAt your home or in our workshop

How repair works at home and in our workshop

Most breakdowns are fixed on site, but some components are easier to work on in our workshop. Here's how the process works from request to warranty.

Repair at home or in our workshop

We repair at your home and only take the appliance to our workshop if it needs disassembly that can't be done on site. Water heater repair in Almaty usually happens right in your apartment: the technician removes the cover, checks the heating element, thermostat, and contacts, and replaces the faulty component. Appliances go to our workshop when they need full tank disassembly, descaling soak, or work on the electronics of a tankless heater — these operations aren't done in a residential bathroom because of dirt, water, and the risk of damaging the casing. At your home, the technician immediately sees the connection conditions — wiring, circuit breaker, water pressure — and this often explains the cause of the breakdown faster than the appliance itself. If your water heater trips the breaker, check the line and grounding first, not just the heating element.

How a technician visit works

  • Request: you describe the symptom — not heating, leaking, tripping the breaker — and the specialist records the model and nature of the breakdown.
  • Visit: the technician arrives within 60 minutes anywhere in the city.
  • Diagnostics: inspection of wiring, circuit breaker, pressure, and appliance components is free, without disassembly that changes anything in the device.
  • Approval and work: after diagnostics, you see what will be replaced and why, approve the scope, and can decline before work begins.

How long repair takes at your home

Duration depends on the component: replacing a heating element and descaling follow a predictable scenario, while finding a leak or working on the control board takes more steps. The heating element and anode are replaced after draining the water and removing the cover: this is a predictable operation with a clear set of parts. Leaks are more complex — you need to find exactly where the connection or gasket is leaking, and sometimes the cause is a crack in the tank, in which case the technician assesses whether it's repairable at all. The control board of a tankless heater and gas water heater requires step-by-step checking of sensors, board, and valves, so diagnostics take longer. The technician gives an exact timeframe after diagnostics, because before disassembly only the symptom is visible, not the scope of work. Quoting time over the phone before inspection almost always leads to a wrong estimate.

What to do before the technician arrives

While the technician is on the way, three things matter — keep yourself safe, don't make the breakdown worse, and save information for diagnostics. Below is a short procedure for typical situations.

If your water heater is leaking

  • Shut off the water: close the valve at the boiler inlet to stop water from entering the tank and halt the leak.
  • Cut the power: unplug the electric boiler or flip the breaker if water has reached the outlet.
  • Clean up the water: wipe up the puddle with a cloth so moisture doesn't seep under the baseboard or down to the neighbors below.
  • Note where it's leaking: remember exactly where it's dripping from — under the flange, from the safety valve, or along the body.
  • Don't touch the valve: don't tighten the safety valve that handles pressure relief, and don't seal gaps with caulk.

What not to do yourself

Don't take the casing apart or remove the heating element yourself — without experience, it's easy to damage the flange, gaskets, and wiring, which adds new problems to the existing one. Over time, the heating element gets coated with scale, and if you pull it out carelessly, the fragile shell cracks and the rubber seals lose their shape and start letting water through. Even if it seems like it's just buildup, a heater that's been removed and reinstalled incorrectly will leak or overheat — and fixing that costs more than the original problem. Also, don't try to rewire anything or "upgrade" the breaker in the panel: that's a matter of electrical safety, not cosmetics. In my view, the sensible limit for DIY is shutting off the water and cutting the power — everything else is best left to a technician.

How to prepare the space and the appliance

  • Clear access: move furniture and remove shelves so the boiler and the panel can be reached from all sides.
  • Clear the floor: remove items, rugs, and appliances from under the unit — the technician needs room for tools.
  • Note the symptom: write down when the problem appears — on power-up, while filling, or during heating — and what the display shows.
  • Take a photo of the error code: capture the whole screen so the numbers and symbols are readable — this speeds up diagnostics.
  • Check access to the panel: make sure the boiler's breaker is labeled and you can reach it without a stepladder.

Almaty water, scale, and maintenance

Hard water speeds up wear on heating elements. Here's how scale leads to breakdowns, what gets replaced during maintenance, and the signs it's time to call a technician.

How scale takes a boiler out of service

Scale on the heating element acts as a thermal insulator — the element gets hotter, overheats, and fails, while the layer on the tank walls speeds up corrosion. Calcium and magnesium salts settle on the metal in a thin layer within just a few months of running on hard water, and with each heating cycle the deposits grow. Heat from the coil transfers to the liquid less effectively, the metal heats above its design temperature, and the nichrome wire burns out. On the inner walls, the same film traps moisture underneath and eats away at the protective coating from the inside. Constant overheating from scale also takes a toll on the thermostat — it trips more often and wears out faster, so cleaning extends the life of not just the heating element but the whole control system.

Descaling and anode replacement

We descale the boiler and replace the magnesium anode — two maintenance steps that reduce the risk of overheating and tank corrosion. We remove deposits from the heating element and the walls, and check the seals and contacts along the way. The magnesium rod is consumed on its own, taking the corrosion instead of the tank metal. Our technicians work on storage and tankless models, with 4 to 20 years of experience, and provide a 1-year warranty on labor and parts. The anode is replaced based on condition, not on a schedule: if it's almost completely worn, cleaning without replacing the anode only gives a temporary effect. The rod wears down gradually, and its condition tells the technician how much life the tank has left. If the anode crumbles in your hands, cleaning alone isn't enough — the tank metal is already unprotected, and you shouldn't put off the replacement.

When to call a technician for maintenance

  • Takes longer to heat: the unit reaches temperature noticeably slower than before — limescale buildup prevents heat from transferring to the water.
  • Noisy when heating: clicking, humming, and crackling indicate that the heating element is overheating under the scale.
  • Smell from the water: a musty or metallic odor appears when the magnesium anode is depleted and the metal has started to corrode.
  • Not cleaned in a long time: with hard water, maintenance should be planned in advance, without waiting for a leak.
  • Prevention is cheaper than restoration: internal corrosion cannot be stopped by replacing just one heating element, so a visit before a leak is cheaper than tank repairs.
  • Time to call a technician: we provide free diagnostics, and a specialist arrives at your home within 60 minutes in the city.

When repair is justified and when it's time to replace the boiler

The decision to repair or replace depends not on the age of the unit, but on which component has failed and the condition of the inner tank.

When repair makes sense

Restoring boilers is justified when the failure is local — heating element, thermostat, safety valve, gaskets — and the inner tank is intact and not damaged by internal corrosion. In such cases, our technicians replace the failed component: the heating element with a new one, the thermostat with one that has the correct setting, the check valve with a similar pressure rating, and the flange seals. Replacing consumable components eliminates the local fault, and the unit works normally again. There is no point in replacing the entire appliance because of one heating element or a stuck valve — the other parts remain functional. Most often, these are exactly the cases: water doesn't heat or leaks at the flange, while the tank itself is dry and without holes. After replacing the component, the unit performs its function again, and further operation depends on the condition of the remaining parts.

When replacement is more reasonable than repair

Replacement is more reasonable if the inner tank is damaged, there is through-corrosion or a leak in the body — these defects cannot be fixed by restoration. The magnesium anode protects the metal from rust until it dissolves: when it is depleted, the walls begin to deteriorate from the inside, and the metal thins to the point of a pinhole leak. Through-corrosion cannot be eliminated by restoration, and sealant under pressure doesn't last long. The second signal is repeated failures of different components in a row: the heating element was replaced, a month later the thermostat failed, then the valve leaked. This indicates general wear, and investments in restoration don't pay off. Another sign is water with rusty sediment and odor, even after cleaning: this means the inner coating is destroyed. In such cases, it's more honest to tell the owner that a new appliance will last longer than a series of patch-ups on the old one.

Selection criteria in the table

What's brokenRepairReplacement
Heating element, thermostat, valveJustifiedNot needed
Seals and flangeJustifiedNot needed
Tank corrosion, through leakCannot be fixedMore reasonable
Repeated failures of different componentsDebatableOften more cost-effective

Warranty and trust in the service provider

When repairing appliances, it matters who exactly comes and what happens to the unit after the work. Here's how the warranty and direct contractor work are structured.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts — this covers both the replaced heating element and the restoration work itself. The condition applies equally to storage water heaters and tankless models: after replacing the heating element or fixing a leak, we remain responsible for the result for one year. Warranty on a part and on labor are different things: if a part fails, it's important that its replacement is also covered, not just the part itself. Therefore, it's important that the warranty covers both the part and its installation, not just the cost of the spare part. In my opinion, it's the combination of 'part plus labor' that distinguishes a proper warranty from a formal piece of paper where, if the heating element fails, you just get its cost back without installation.

Direct service provider, not an intermediary

Tech Service is a direct service provider: our technician comes to you, not a contractor through an aggregator, so responsibility for the work stays the same at every stage. Our technician handles diagnostics, disassembly, part replacement, and post-repair checks—the appliance doesn't get passed between contractors. With a direct provider, the technician sees the whole appliance, not just a forwarded description, and is accountable to you directly for the result. This matters when the cause isn't obvious: a strange noise in the drum or an intermittent controller fault is hard to describe in words but easy to catch on site. With an intermediary scheme, an extra layer of approvals appears between you and the person holding the tools, and a small part like a gasket or sensor turns into a separate request.

Free diagnostics and experienced technicians

Diagnostics are free, and our technicians have 4 to 20 years of experience—enough to quickly pinpoint the cause from a symptom. The technician quotes the cost after inspection, once it's clear which component has failed: heating element, thermostat, magnesium anode, or seal. Experience shows in the details: the technician checks not only the appliance but also the connection conditions, because a tripping breaker can be caused by something external—a burnt socket or a loose contact on the line. Sometimes the boiler is fine, but the wiring triggers the protection, and replacing the heater won't fix it. This approach saves you time and removes the temptation to replace parts at random. Once the cause is clear, the scope of work is discussed specifically, not just in case.

Boiler and water heater repair essentials

The signs gathered together help you understand in advance what happened to the appliance and what to expect from a specialist's visit. Below is a brief summary of the entire article.

  • A symptom is not a diagnosis: "not heating," "leaking," and "tripping the breaker" point to different components, and each needs its own approach.
  • The appliance type determines the scope of work: storage boilers, tankless heaters, and gas water heaters have different weak points and different sets of tasks.
  • Safety comes first before the technician arrives: shut off the water, disconnect power, and don't open the casing yourself.
  • Hard water speeds up wear: scale on the heating element and a worn anode are common causes of overheating and tank corrosion.
  • Repair or replace is a matter of the component: local faults are fixed, a damaged tank is replaced, and on-site diagnostics decides which.

12brands

Which water heater brands we repair in Almaty

We work with various water heater brands. Choose a brand to learn about repairing that specific equipment.

We also repairWe also repairTECH SERVICE09

Besides water heater repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before water heater repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp