Original
Original part
- Selection
- by gamepad model
- Compatibility
- full with the device
- Warranty
- 1 year on labor and parts
- Cost
- after diagnostics
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We fix PlayStation and Xbox gamepads: sticks, buttons, batteries, syncing.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician at your door anywhere in the city
freediagnostics
The technician opens the case and checks the board, contacts, and stick mechanics. Cleans out dirt, replaces worn modules, buttons, and the battery. After reassembly, tests the connection to the console and charging.
01
Step 1quick
We remove the case and inspect the board, contacts, and stick mechanics for dirt and damage.
02
Step 2quick
We remove dust and dirt from the board, buttons, and stick modules, and check that the mechanism moves freely.
03
Step 3based on diagnostics
We replace stick modules, buttons, the battery, or the connector — based on diagnostics and your approval.
04
Step 4quick
We connect the gamepad to the console and check syncing, charging, and the response of all buttons and sticks.
05
Step 5quick
We put the case back together, run a final test, and hand over the device with a 1-year warranty on labor and parts.
5
Five typical signs point to worn mechanics or electronics in the gamepad. The sooner you get it looked at, the easier it is to restore the device.
Stick drift
The cursor or character moves without you touching the stick. Most often the cause is a worn potentiometer or dirt in the stick mechanism.
Button sticks
The button doesn't spring back or only works every other press. Usually it's a dirty membrane or dirt stuck under the button.
Trigger crunches
L2 or R2 doesn't return smoothly, and you hear a click or squeak. The cause is a worn spring or dirt in the trigger mechanism.
Charging port is loose
The cable doesn't sit tight and charging only works at an angle. A crack near the port or damaged contacts needs inspection.
Stick caps are worn
The cap surface is worn, your finger slips, and the cap itself spins. This is a sign of worn rubber.
If you notice one or more of these signs, don't take the gamepad apart yourself — it can make diagnostics harder.
Describe the symptomsParts are selected based on the gamepad model. You can choose an original module or a compatible analog. The price of parts and labor is given after diagnostics.
Original
or
Analog
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 5 000 ₸cost

BeforeAfterThe digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience7 yearsGame console repair technician
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
We reply during working hours
Send a request — the technician will arrive in 60 minutes anywhere in the city. The cost of labor and parts is agreed on site. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Бакыт Ж.Order No. TS-2608-221 · 23 February 2026
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Основная жалоба — дрифт стиков. Проверил дома — всё на месте, ничего не забыли.
Татьяна Б.Order No. TS-2509-491 · 22 December 2025
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Жена сказала выкинуть, я решил сначала показать мастеру. Больше всего напрягало: не включаеться. Приняли без предоплаты, это подкупило. Заплатил 13 500, и не жалею. Поменяли: стик. Включил, проверил, работает.
Максим Ю.Order No. ZK-2023/124 · 24 September 2023
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Скажу прямо: ожидал худшего. Первое, что заметил: перегревается. Дмитрий Радионов взялся за то, от чего другие отказались. Деталь на замену — система охлаждения. Заявку приняли по телефону, перезвонили через десять минут. Цену обсудили до начала, сюрпризов не было. Сделали аккуратно, следов разборки не видно.
Елдос К.Order No. TS-2201-509 · 10 November 2022
oursСмотрел, у кого есть запчасти на такую модель. Жалоба простая: не заряжается. Пользуюсь ежедневно, вопросов нет.
Ринат Х.Order No. ZK-9366 · 25 July 2022
oursТехника на гарантии уже не была, так что выбор был свободный. Под замену пошло: плата. Проверили при мне, показали, что всё держит.
Елена К.Order No. 536189 · 1 September 2021
oursТехника на гарантии уже не была, так что выбор был свободный. Диагностика VR-шлема — с этого всё началось. Жалоба простая: мутность. Максим Снегирев перезвонил, когда всё было готово. Приняли, выдали квитанцию, всё по-человечески. Назвали 10 500 сразу, в конце сумма не изменилась. Из деталей — плата. Починили и дали гарантию на месяц.
Азамат Е.Order No. 26840 · 16 April 2021
oursОтдельно спасибо мастеру — Максим Снегирев, терпения ему хватило. Проверили на всех режимах, всё чётко.
Андрей П.Order No. TS-2138 · 7 September 2020
oursТехниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Бірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Рақмет, техника әлі күнге дейін жұмыс істеп тұр.
Елена К.Order No. TS-1905-483 · 13 June 2019
oursПроблема — не определяется. Дмитрий Радионов возился с этим дольше, чем планировал, но довёл до конца. Все разъёмы на месте, ничего не люфтит.
Богдан С.Order No. ZK-6036 · 20 August 2017
oursСимптом был очевидный: не включается. Отдельно спасибо мастеру — Дмитрий Радионов, терпения ему хватило. Ребёнок уже проверил на прочность, держится.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, stuck buttons and triggers can be repaired: the technician opens the case, cleans the contacts and membranes, and replaces worn parts. The complexity depends on the gamepad model.
Yes, Joy-Con drift is fixed by replacing the stick and calibrating it—a standard job for our technicians. Free diagnostics will show the exact scope of work.
Test the gamepad on another device or connect a second controller to the console: if only one malfunctions, the issue is with it. Diagnostics at the service center will confirm the cause.
Drift won't go away on its own: the worn stick mechanism keeps degrading, and over time you may need more complex board repair. It's better to show the gamepad to a technician right away.
The DualSense is harder to disassemble due to adaptive triggers and tight layout, so it requires more care. The DualShock 4 is simpler in design, but the outcome depends on the specific fault.
Yes, a sticking A button is usually fixed by cleaning the contact pad or replacing the membrane. The technician will determine the cause after disassembling the gamepad.

Author: Bakdaulet E.,Game console repair technician
Published
Updated
Tech Service repairs PlayStation, Xbox, and Nintendo Switch joysticks in Almaty: our technician comes to your home or takes the gamepad to the service center. Diagnostics are free, we cover the whole city within 60 minutes, and you get a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.
A joystick rarely breaks completely—usually one component fails, and the technician can already tell from the symptom what to check first during diagnostics.
Stick drift is when the analog module stops returning to neutral, and the character moves on its own even though you're not touching the stick. It shows up in different ways: the camera slowly drifts to the side, the aim in a shooter pulls without command, menus scroll in jumps, and in sports simulators the character leans to one side. The cause is wear on the resistive tracks and graphite coating inside the stick module: after hundreds of hours of active gaming, the contact loses precision, and the controller reads the position as offset from center. The mechanical part is still intact—the stick springs back and clicks as usual. Drift almost always sits in the stick module itself, not the board, so the technician first checks the module's response and only then looks at the rest—this avoids unnecessary disassembly.
If the joystick won't charge, the technician checks the charging port and battery, and after a fall also examines the board and case. The USB-C or micro-USB port is the most vulnerable spot: with frequent cable connections, the contacts loosen, oxidize, or detach from the board, and the charge simply doesn't reach the battery. Sometimes it's the opposite—the port is fine, but the battery capacity has dropped so much that the indicator shows charging, yet the gamepad holds it for only a few minutes. After a fall, cracks in the solder and board displacement inside the case add to these causes. Power issues aren't always in the battery—sometimes the port or contact is to blame, so replacing the battery "blind" doesn't solve the problem: we first test the entire power circuit.
To repair or buy new—this fork isn't decided by price blindly, but by the type of fault, model, and condition of the case. Let's break down how we look at this fork and what conclusions the check gives before a decision.
Diagnostics are free at our service, and based on the results, the technician names the cause and the cost — before you decide whether to restore the joystick. During the check, the connector contacts are tested, the analog sticks are tested for drift and response, and the controller board is examined under magnification. We also check how the gamepad behaves when paired with the console: some complaints about a stuck stick turn out to be a pairing failure or a console setting issue. Around the city, a technician arrives within 60 minutes, so the check doesn't stretch over days. Diagnostics are valuable because they separate a real malfunction from a false symptom — sometimes a non-working joystick turns out to be a console problem, not a gamepad one. For the owner, it's also a way to compare two paths: repair one component or spend money on a new device.
The on-site format is convenient because you don't have to leave the joystick at the service center for several days: the technician comes, diagnoses, and works on the spot while you're nearby.
Our on-site visit takes up to 60 minutes anywhere in the city, and you can book a home visit or service at our center. We accept requests by phone or messenger: the staff member clarifies the gamepad model, symptoms, and convenient address, then heads out. This format covers both joystick repair at home when you don't have time to bring the device in, and scheduled drop-off at the service center if that's more convenient. The on-site technician brings tools for typical faults, so some work is completed right on the spot without a second visit. A Tech Service technician reaches any location within an hour, and that's the only timeframe we promise before inspection — the rest depends on the fault. If you need joystick repair, Almaty is covered by on-site visits throughout the city, and the technician comes to your home or takes the gamepad to the service center.
The on-site format is convenient for private owners and gaming clubs, where joysticks break regularly and in batches. For a private owner, an on-site visit saves travel: no need to find a service center, bring the gamepad, and pick it up later. For a club, the technician comes to the fleet of devices at once, not one by one — so inspection and maintenance proceed in a stream, without gaming spots sitting idle. We work throughout the city, so both apartments and club premises are within the on-site coverage area. In my opinion, for a club, an on-site visit is also more advantageous because it's assessed on the spot which gamepads are easier to replace and which are worth repairing. For a fleet of devices, this saves time: you don't have to transport each one separately.
Each platform has its own weak points, so the technician approaches DualSense, DualShock 4, Xbox controller, and Joy-Con differently. Let's look at which components fail more often and what we check first.
| Platform | Common fault | What we check |
|---|---|---|
| DualSense (PS5) | Stick drift, charging port | Stick module, USB-C |
| DualShock 4 (PS4) | Stick drift, buttons sticking | Stick, button contacts |
| Xbox controller | Buttons and triggers sticking | ABXY buttons, triggers |
| Joy-Con (Switch) | Stick drift | Stick module |
Our repair logic is the same for all platforms: first a free diagnostic, then replacement of the failed component and a response check. A Tech Service technician identifies the cause of the joystick malfunction during diagnostics — stick module wear, worn button contacts, or controller board damage — and only then disassembles the relevant unit. Analog sticks, buttons, and triggers in DualSense, DualShock 4, Xbox controller, and Joy-Con are built differently, but response testing and calibration are performed the same way on all models. We provide a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. The difference between platforms lies in the design of components, not in the approach, so the technician starts with diagnostics rather than assuming based on the model: this way the cause is found faster, and unnecessary parts remain untouched.
Warranty and a transparent payment process remove the main fear of any owner — overpaying to restore an old gamepad. Here we explain what cases our service covers and what makes up the final amount.
We provide a 1-year warranty on labor and parts, so if the same issue comes back, it's handled under warranty and not charged again. The warranty covers both replaced components and the repair procedure itself for sticks, buttons, and the board. Technicians with 4 to 20 years of experience remember which parts were replaced, so on a repeat visit they don't waste time disassembling and searching for the cause. Beyond responsibility for the work performed, responsibility for parts matters: if a component fails, it's covered and not considered a new breakdown. That's why on a repeat visit you just need to describe the previous issue — it's easier to confirm that the failure falls under warranty and isn't new damage from a drop or liquid spill.
Here are the key things to keep in mind before contacting us: what factors influence the decision to repair and what criteria to use when choosing a service provider.
If you ask, the technician will check other parts during the same visit.

If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read





