Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a gas boiler

Gas Boiler Cleaning in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics. 1-year warranty on labor and parts.

  • Technicians with 4 to 20 years of experience
  • Kaspi QR, Kaspi Red, card, cash, or bank transfer accepted
  • Gas boiler cleaning and maintenance

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database

1 yearwarranty on labor and parts

60 minutestechnician arrival anywhere in the city

freediagnostics

What the job includesIncludesTECH SERVICE02

What gas boiler cleaning includes in Almaty

The technician takes the boiler apart, removes scale and soot from the heat exchanger, cleans the burner, and checks the sensors and controls. Diagnostics are free, and the cost of labor and parts is quoted after. 1-year warranty on labor and parts.

Signs of a faultSigns of a faultTECH SERVICE03

When you need gas boiler cleaning in Almaty

5

Five signs of clogging and scale that a homeowner notices without any instruments. In winter they get worse because the boiler runs longer and at higher output.

  1. Noise during operation

    Humming, whistling, or clicking appears due to scale in the heat exchanger and a dirty burner.

  2. Lower output

    The boiler heats less, water takes longer to warm up, and radiators stay cool.

  3. Soot and carbon marks

    Soot or carbon marks near the sight glass and on the casing indicate incomplete combustion.

  4. Higher gas consumption

    Compare meter readings for the same period at the same outdoor temperature and note the difference.

  5. Flame color and shape

    Check through the sight glass: the flame should be blue with an even cone, without yellow tips or soot.

Note the signs over a week: noise, gas consumption, error codes — this will help the technician find the cause faster.

Describe the symptoms
Parts and materialsPartsTECH SERVICE04

Parts and materials for gas boiler cleaning in Almaty

To select a part, we need the boiler model, serial number, and the component number from the nameplate. The technician checks this data against the manufacturer's catalog.

OEM

Factory part

Selection
By model, serial number, and component number from the nameplate
Compatibility
Matches the component exactly
Lead time
Depends on supplier availability
Warranty
1 year on labor and parts

Aftermarket

Compatible part

Selection
By model, serial number, and component number from the nameplate
Compatibility
We check against the manufacturer's catalog
Lead time
Depends on supplier availability
Warranty
1 year on labor and parts
PricesPricesTECH SERVICE05

How much gas boiler cleaning costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Cleaning of wall-mounted gas boilerexact price — after the free diagnostics

1–2 hours

from6 500 ₸

Cleaning of double-circuit boiler (both heat exchangers)exact price — after the free diagnostics

2–4 hours

from14 500 ₸

Cleaning / flushing of floor-standing boilerexact price — after the free diagnostics

2–4 hours

from17 500 ₸

Chemical flushing of main heat exchangerexact price — after the free diagnostics

2–4 hours

from13 000 ₸

Flushing of secondary DHW heat exchangerexact price — after the free diagnostics

1–2 hours

from12 000 ₸

Work before and afterBefore and afterTECH SERVICE06

Before and after gas boiler cleaning in Almaty

Gas valve coil burned out

1–2 hourstime

from 7,000 ₸cost

Problem
The boiler would not ignite: ignition triggered, but gas did not reach the burner, and an error appeared after several attempts.
What we did
The technician shut off the gas, replaced the gas valve, checked the connections for tightness, and adjusted the gas pressure.
Result
Ignition works, the burner lights, and the boiler runs without errors. 1-year warranty on labor and parts.
I want the same
Ariston gas boiler: gas valve coil burned out — after repairBeforeAfter
01 / 01
All repairs
TechniciansTechniciansTECH SERVICE07

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a gas boiler at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book gas boiler cleaning in Almaty

Describe your boiler model and symptoms; the technician will confirm the visit time and answer your maintenance questions.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE08

Reviews of gas boiler cleaning in Almaty

Эльмира Т.Order No. TS-3700 · 31 October 2025

ours

Симптом был очевидный: не зажигаеться. Проверили при мне, показали, что всё держит.

Repair: gas boiler repair in

Александра Н.Order No. ZK-2025/532 · 2 September 2025

ours

Құрылғы ескі болғандықтан, бөлшек табыла ма деп қорықтым. Күтуге уақытым жоқ еді, сол күні алып кеттім)

Repair: gas boiler repair in

Айгуль К.Order No. TS-3515 · 6 September 2024

ours

Пробовал найти мастера в своём районе, но все были заняты. Сдал в ремонт: газовая колонка. Повод для визита: не зажигается. Нагрев в норме, посторонних звуков нет.

Repair: gas boiler repair in

Ержан А.Order No. 34055 · 18 May 2023

ours

Позвонил в три места, здесь единственые назвали цену сразу. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Мирас С.Order No. ZK-5244 · 24 November 2022

ours

Техника на гарантии уже не была, так что выбор был свободный. Вернули в тот же день, всё функционирует

Repair: gas boiler repair in

Айнур М.Order No. 2022-1316 · 28 April 2022

ours

Долго откладывал ремонт, потом всё-таки собрался. Долго искал, кому это отдать, и вот нашёл. Жалоба простая: течёт. Поменяли: насос. Заявку приняли по телефону, перезвонили через десять минут. Проверил дома — всё на месте, ничего не забыли

Repair: gas boiler repair in

Ержан А.Order No. 14877 · 22 August 2021

ours

Симптом был очевидный: не греет. Никита М приехал в тот же день, хотя был конец смены. Работает даже тише, чем до поломки.

Repair: gas boiler repair in

Сабина Г.Order No. ZK-7520 · 4 October 2020

ours

Техниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Техника кенеттен істен шықты, қатты асығыс едім. Достарыма да айттым.

Repair: gas boiler repair in

Виктор Ф.Order No. 2020-4309 · 31 May 2020

ours

Симптом был очевидный: течёт. Отдельно спосибо мастеру — Никита М, терпения ему хватило. Пользуюсь ежедневно, вопросов нет.

Repair: gas boiler repair in

Вероника П.Order No. 2019-7397 · 21 July 2019

ours

Больше всего напрягало: не греет воду. Дамир М возился с этим дольше, чем планировал, но довёл до конца. Сказать, что доволен — ничего не сказать.

Repair: gas boiler repair in
See all reviews
Questions and answersQuestionsTECH SERVICE09

Questions about gas boiler cleaning in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How can you tell if the heat exchanger in a gas boiler is clogged?

The boiler takes longer to heat water and radiators, you hear noise and humming during operation, and gas consumption goes up at the same load. Scale or soot builds up on the walls of the heat exchanger — this is visible during disassembly and depends on the model.

Can you clean the heat exchanger of a gas boiler yourself?

You can flush the heat exchanger yourself, but without experience it's easy to damage the seals and flood the electronics. Gas equipment requires care, so it's safer to leave cleaning to a technician.

How often should the heat exchanger in a gas boiler be flushed?

Typically the heat exchanger is flushed once every few years, but in Almaty hard water makes scale build up faster. If the boiler is heating water worse, it's worth checking sooner.

Are Navien and Bosch gas boilers cleaned differently?

Yes, disassembly and access to components differ between brands and depend on the model. The technician chooses the cleaning method for the burner and heat exchanger for each specific boiler to avoid damaging parts.

Should the chimney be cleaned along with the boiler?

That's a separate service: boiler cleaning and chimney cleaning are different jobs. If draft is weak or there are traces of soot, tell the technician — they'll advise what to do about the chimney.

Is there a warranty on gas boiler cleaning?

Yes, we provide a 1-year warranty on labor and parts. If the boiler works incorrectly after cleaning, the technician will find the cause.

Repair guideArticleTECH SERVICE10

Gas boiler cleaning in Almaty with a technician on-site in 60 minutes

Author: TECH SERVICE editorial team

Published
Updated

Tech Service provides at-home gas boiler cleaning in Almaty: a technician arrives within 60 minutes anywhere in the city, diagnostics are free, and we give a 1-year warranty on labor and parts. The technician first checks the boiler and shows you what's dirty, then agrees on the scope of cleaning and quotes the price.

When a gas boiler really needs cleaning

Cleaning is needed based on symptoms, not the calendar. Below are the signs that help both the technician and the owner decide if it's time to call a specialist.

Signs that it's time to clean

  • Gas consumption has gone up: at the same indoor temperature, the meter shows more cubic meters than last season.
  • The boiler takes longer to heat water: heating the DHW circuit takes noticeably more time, and the tap runs only lukewarm.
  • The flame color has changed: instead of a steady blue burn, the burner produces yellow tongues with soot—a sign of carbon buildup.
  • Noise and whistling appeared: you hear clicks, humming, or whistling during operation that weren't there before.
  • Soot on the casing and in the chamber: dark deposits on the burner and combustion chamber walls are visible during inspection.
  • The boiler goes into error more often: protection triggers on overheating or draft, even though it didn't happen before.

What happens if you don't clean the boiler for several years

Without maintenance, carbon deposits on the burner and scale in the heat exchanger build up, the unit takes longer to heat water and uses more gas for the same load. A layer of scale in the DHW and heating circuits acts as insulation: metal transfers heat to water less efficiently, the burner has to run longer, and boiler efficiency drops. Carbon deposits on the burner disrupt the gas-air mixture—the flame turns yellow and sooty, and soot settles in the combustion chamber and on the heat exchanger walls. A clogged heat exchanger conducts heat poorly, so the water at the outlet stays cool even though the burner is running at full capacity. Some "breakdowns" after startup are the result of contamination, not part failure, which is why gas boiler diagnostics come before replacing components. In my opinion, it's cheaper to check the burner and heat exchanger once a season than to replace a component washed out by scale.

What gas boiler cleaning includes

Gas boiler cleaning isn't just "blowing off the cover"—it's sequential work on each component. We show which parts are removed, how they're checked, and by what signs you can tell the work was actually done, not just faked.

Which boiler components are cleaned and checked

ComponentWhat we doWhat we check
Gas burnerRemove and clean carbon depositsFlame uniformity, nozzles
Heat exchangerFlush the DHW circuit to remove scaleFlow capacity, signs of overheating
FlueCheck and clean the channelDraft, no blockages
Flame sensorCheck operationResponse to flame
Gas valveCheck operationLeak-tightness, stem movement
Blower fanCheck operationImpeller movement, noise

How to tell carbon deposits on the burner from scale in the heat exchanger

Carbon deposits are combustion products on the burner and in the flue, while scale is buildup on the DHW circuit side of the heat exchanger, and they're removed with different tools. We remove the burner and treat it mechanically, blow out the nozzles so the flame spreads evenly along its entire length again. The heat exchanger is flushed separately: the city's hard and mineral-rich water creates a dense layer of salts that reduces flow in the DHW circuit and causes uneven heating. We check the flue channel during the same visit because a clogged channel sends some combustion products back into the boiler, making carbon deposits build up faster. These two types of contamination shouldn't be confused: treating the burner doesn't remove scale, and flushing the heat exchanger doesn't remove carbon deposits. Our technicians work with boilers from 4 to 20 years old and separate these operations in the report.

How to tell the technician actually cleaned the boiler

  • Removed components: the burner and heat exchanger were taken out, not just blown with compressed air from above.
  • Replaced consumables: new O-rings and gaskets were installed; otherwise, a leak is possible after reassembly.
  • Tested sensors: the flame sensor, gas valve, and control board were tested, not just visually inspected.
  • Post-reassembly parameters: the technician measures the boiler's operation after service and shows you the result instead of closing the casing right away.
  • Explanation of work: ask to see the removed burner and to explain what was checked — this is a normal part of the job, not an extra request.

Cleaning, repair, or maintenance

In search results, three services are often mixed up: scheduled maintenance is sold as cleaning, and a regular flush is sold as repair. We explain which service to order if the boiler is working normally, and what to do when a code appears on the display.

How cleaning differs from maintenance and repair

ServiceWhen it's neededWhat we do
Gas boiler cleaningDraft has dropped, the burner is noisy, gas consumption is risingWe remove carbon deposits from the burner and flush the heat exchanger
Gas boiler maintenanceOnce a season, with no complaints about operationCleaning plus checking the automation, pressure, and tightness
Gas boiler repairA component has failed, the symptom persists after flushingWe replace or restore the part

If the boiler shows an error but still heats

When an error appears on the display, we first perform free diagnostics and only based on its results decide whether flushing is needed or repair is already required. The code on the screen is read together with the readings from the flame sensor and pressure sensor: a discrepancy between them points to the control board or incorrect settings, not a dirty heat exchanger. So it's not worth starting with a random flush — you'll pay for a procedure that doesn't eliminate the cause. A malfunction while the boiler is running usually comes from a sensor or settings, and such a symptom won't disappear after flushing. An experienced technician with 4 to 20 years of experience distinguishes one from the other in a single visit, and the 1-year warranty on labor and parts covers any of the three scenarios. Scheduled maintenance once a season reduces the likelihood of a sudden breakdown during frosts — in our practice, boilers without maintenance fail exactly during cold snaps.

How a technician visit works and what they do at your home

We break down the request process step by step: from the call to checking the boiler after reassembly. We show how much time the specialist spends at the client's place and how the work changes in winter, in an apartment, and in a private house.

From request to post-cleaning check

  • Request and visit: we arrive at your home within 60 minutes anywhere in the city, so there's no need to take the boiler to a service center.
  • Free diagnostics: the specialist inspects the burner, heat exchanger, and flue duct, and identifies the cause of carbon deposits and scale.
  • Approval of work: after diagnostics, we discuss the scope of work and cost with you, and we start only with your consent.
  • On-site cleaning: we disassemble the components, remove carbon deposits and buildup, flush the heat exchanger, blow out the burner, and check draft and joint tightness.
  • Post-reassembly check: we start the boiler, monitor ignition, flame, and pressure, and make sure heating and hot water work properly.
  • Warranty: we provide a 1-year warranty on labor and parts — if the problem recurs, the specialist will return under warranty.

Cleaning in winter, in an apartment, and in a private house

Gas boiler servicing in Almaty is available at any time, including during the heating season, and it works the same way in apartments and private houses — the only difference is access to the flue. In apartments, the flue is usually a shared duct that vents through the facade, so work focuses on the burner and heat exchanger inside the unit without touching the building's shared systems. In a private house, we also check the individual flue and air duct: soot buildup there affects draft more than a dirty burner does. Wall-mounted and floor-standing models are disassembled differently, but the set of steps is the same — remove soot, flush the heat exchanger, check for leaks. In winter, we schedule the work so the heating isn't off any longer than the procedure itself. Our 4 to 20 years of experience tells us not to put off routine servicing until a breakdown in freezing weather — thawing and restarting a frozen circuit is harder than servicing it in advance.

How often to clean a boiler in Almaty and how to check

Service frequency depends on water hardness and gas quality in the city, while the warranty and rules for DIY work are the final barrier before booking. Below we cover both points in detail.

How often to clean a boiler given local water and gas

The technician's guideline is to check the unit once a year, and with hard water and heavy hot water use — more often, based on symptoms. Scale builds up in the hot water circuit faster the harder the water: a 1 mm layer noticeably reduces heat transfer, and gas consumption climbs quickly. Wall-mounted models with a bithermic heat exchanger are more sensitive to deposits than floor-standing models with a cast-iron block — their channels are narrower, so clogs show up sooner. Gas boiler diagnostics are free: the technician opens the combustion chamber, assesses soot on the burner and the condition of the heat exchanger, rather than just looking from the outside. Gas boiler cleaning in Almaty is performed for wall-mounted and floor-standing models, but the scope of work differs. There's no single standard, so the decision is based on the condition of components during diagnostics, not on the calendar — with soft water and moderate use, the interval between procedures can be longer.

Warranty and can you clean it yourself

We provide a 1-year warranty on labor and parts, and we don't recommend DIY cleaning — without disassembly and checking components, it's easy to damage gaskets and sensors. O-rings and gaskets on heat exchanger connections tear during careless disassembly, temperature and pressure sensors are removed with force and fail, and a leak after reassembly shows up during the heating season. A technician arrives within 60 minutes anywhere in the city, diagnoses for free, and quotes the cost of work before servicing begins. Tech Service is a direct contractor: our own technician comes to your home, not a middleman. If the unit is under the manufacturer's warranty, service by a direct contractor doesn't interfere with warranty work.

Gas boiler cleaning for safe heating

We've covered the key factors that determine the result of servicing: when to book it, which boiler components the work affects, and why prevention costs less than unscheduled repairs.

  • When to call: pressure drops, unusual noise during ignition, a weak flame, and rising gas consumption are signals not to delay a technician's visit.
  • Scope of work: the heat exchanger is removed and flushed, the burner is cleaned of soot, and sensors, controls, and connections are checked for leaks.
  • Diagnostics: free, so the cause of the fault is identified first, and the technician quotes the cost of work after inspecting the components.
  • Frequency: Almaty's hard water speeds up scale buildup, so it makes sense to check the heat exchanger once a season.
  • Warranty: one year on labor and parts — with the recommended service interval, the boiler maintains its rated output.
Other servicesOther servicesTECH SERVICE11

Other services besides gas boiler cleaning in Almaty

If you ask, the technician will check other parts during the same visit.

BlogBlogTECH SERVICE12

Worth reading before gas boiler cleaning in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp