Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a dehumidifier

Dehumidifier Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • 4 to 20 years of experience we accept Kaspi QR, Kaspi Red, card, cash or bank transfer

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Schrader valve solderingfrom7 000 ₸
  • Evaporator cleaningfrom8 000 ₸
  • Preventive maintenance and servicefrom8 000 ₸
  • Circuit tube solderingfrom8 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common dehumidifier faults in Almaty

Below are typical symptoms and their likely causes. The technician will pinpoint the exact cause after free diagnostics.

PricesPricesTECH SERVICE03

How much dehumidifier repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Schrader valve solderingparts not included

1–2 days

from7 000 ₸

Evaporator cleaningexact price — after the free diagnostics

1–2 hours

from8 000 ₸

Preventive maintenance and serviceexact price — after the free diagnostics

1–3 hours

from8 000 ₸

Circuit tube solderingexact price — after the free diagnostics

1–2 days

from8 500 ₸

Humidity sensor replacementparts not included

1–2 hours

from10 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after dehumidifier repair in Almaty

Air filter clogged with dust

1–2 hourstime

from 8,000 ₸cost

Problem
The dehumidifier began drawing in air worse, the airflow weakened, and a dense layer of gray dust, lint, and pet hair accumulated on the filter grille.
What we did
The technician removed the air filter, cleaned the mesh of dust and lint, washed and dried it, and checked the fit of the frame and the airflow.
Result
The airflow is restored, the filter is clean and white, and the dehumidifier runs smoothly. The technician checked the operation on site.
I want the same
Air dehumidifier: air filter clogged with dust — before repairAir dehumidifier: air filter clogged with dust — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How dehumidifier repair works at your home in Almaty

Five steps from request to post-repair check.

  1. Requestsame day

    Leave a request and a technician will come to you.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Approval of workafter inspection

    The technician explains the cause and scope of work, and you decide what to do next.

  4. Repairby appointment

    We perform the work and accept payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies.

  5. Post-repair checkafter repair

    We check the operation. 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book dehumidifier repair in Almaty

Describe the fault and the device model; the technician will clarify the details and suggest a convenient visit time.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE06

Reviews of dehumidifier repair in Almaty

Вероника П.Order No. 2025-6678 · 21 January 2025

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Обратился по поводу осушителя воздуха. Симптом был очевидный: шумит. Приняли без очереди, оформили за пять минут. Под замену пошло: вентилятор. Шум пропал, работает мягко.

Repair: dehumidifier repair in

Аида Т.Order No. TS-2409-568 · 6 August 2024

ours

Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Скажу прямо: ожидал худшего. Проблема — шумит. Никита М объяснил причину так, что понял даже я. Запчасть была в наличии, доплачивать не пришлось. Заодно поменяли: вентилятор. Приехал вечером, мастер ещё был на месте. Нагрев в норме, посторонних звуков нет.

Repair: dehumidifier repair in

Дамир И.Order No. TS-2411-554 · 9 April 2024

ours

Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Честно, уже готовился покупать новое, но обошлось. Первое, что заметил: шумит. Посмотрели, назвали срок — два дня. Даже с учётом запчасти вышло гуманно. Заодно поменяли: компрессор. Второй месяц — полёт нормальный.

Repair: dehumidifier repair in

Малик Т.Order No. ZK-8307 · 30 March 2024

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Вечером включил — и всё стало ясно: шумит. Никита М принял, посмотрел и сразу сказал, что делать. Ответили быстро, не пришлось ждать на линии. Вернули в тот же день, всё функционирует)

Repair: dehumidifier repair in

Татьяна Б.Order No. ZK-2023/941 · 11 August 2023

ours

С чем пришёл: не собирает влагу. Никита М принял, посмотрел и сразу сказал, что делать. Техсервис на Абая, если не ошибаюсь, — вот туда и поехал. Второй месяц — полёт нормальный.

Repair: dehumidifier repair in

Динара М.Order No. TS-1662 · 2 February 2023

ours

С чем пришёл: шумит. Дамир М принял, посмотрел и сразу сказал, что делать. Крутит ровно, без рывков

Repair: dehumidifier repair in

Даулет С.Order No. 125176 · 9 December 2022

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Привёз на диагностику: осушитель воздуха. Первое, что заметил: шумит. Цену обсудили до начала, сюрпризов не было. Гудит ровно, не грееться, всё как надо.

Repair: dehumidifier repair in

Эльвира Д.Order No. 98600 · 12 November 2022

ours

Позвонил в три места, здесь единственные назвали цену сразу. Вечером включил — и всё стало ясно: шумит. Дамир М честно сказал, что менять, а что ещё походит. Крутит ровно, без рывков.

Repair: dehumidifier repair in

Светлана Д.Order No. ZK-6895 · 23 September 2022

ours

Хотел сначала вызвать мастера на дом, потом передумал. Проверил дома — всё на месте, ничего не забыли.

Repair: dehumidifier repair in

Ерасыл Б.Order No. 12692 · 21 May 2022

ours

Настроение было испорчено конкретно. Проблема — шумит. Сделали и забыл про проблему)

Repair: dehumidifier repair in
Questions and answersQuestionsTECH SERVICE07

Questions about dehumidifier repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How can I tell if my dehumidifier is faulty?

Signs of a problem include not collecting moisture, leaking, making noise, not shutting off when the target level is reached, or showing an error code. If any of these appear, it's worth getting a free diagnostic.

How do I clean a dehumidifier?

Remove and rinse the filter, wipe down the housing, and check the drain hole for clogs. Cleaning the accessible parts extends the unit's life, but if it still doesn't work after cleaning, you'll need a technician.

How long can a dehumidifier run without a break?

Most household models are designed for continuous operation, but the exact lifespan depends on the model and conditions. If the unit shuts off by itself or hums louder than usual, it's best to have a technician take a look.

The dehumidifier hums but the fan doesn't spin—is it repairable?

Yes, most often the issue is the fan motor or its winding, and less often the control board. A technician will check the assembly and replace the faulty part if repair is possible.

The dehumidifier compressor won't start—can it be fixed or does it need replacing?

It depends on the cause: sometimes the start capacitor or board is at fault, and repair is possible. If the winding is burned out or the shaft is seized, the compressor is replaced—the technician decides after diagnostics.

Why is a clogged drain in a dehumidifier dangerous?

A clog prevents condensate from draining into the tank, so it can overflow onto the floor or get inside the housing. Regularly checking the drain and cleaning the filter helps avoid leaks and unnecessary breakdowns.

Repair guideArticleTECH SERVICE08

Air Dehumidifier Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs household and industrial air dehumidifiers in Almaty: a technician comes to your home within 60 minutes or the work is done at our service center. Diagnostics are free, the technician gives you the price after inspection, and there is a 1-year warranty on labor and parts. Our technicians have 4 to 20 years of experience.

Why the dehumidifier doesn't collect moisture and won't turn on

The two most common calls are: the unit hums but there's no condensate in the tank, or it doesn't start at all. Let's look at the causes of each symptom and what the technician checks.

The dehumidifier runs but doesn't collect moisture

We start by checking the compressor and refrigerant level, because in compressor models moisture is collected through condensation on the evaporator. The technician measures the pressure in the circuit, inspects the evaporator and condenser, and listens to how the compressor runs under load. When the unit starts but the evaporator stays warm, the culprit is usually a refrigerant leak or a dirty heat exchanger, not the control board. Evaporator fins clogged with dust reduce heat exchange, and condensate simply doesn't have time to form on the surface. A leak is found by oil traces at the joints and by pressure drop in the circuit, not by eye. We also check the fan: reduced airflow lowers moisture collection just as noticeably as low refrigerant. If the compressor starts but the evaporator isn't cold, the cause is a refrigerant leak or a dirty heat exchanger, not the control board.

The dehumidifier won't turn on

Our diagnostics start with the control board and sensors, because no response to the button is more often related to them than to the compressor itself. The technician checks the power at the board input, tests the button and display circuit, and reads the water level sensor and float. When the float sticks in the "full tank" position, the electronics block startup and show no signs of life — from the outside it looks like a complete failure. Oxidized contacts on the display ribbon cable cause the same effect, so the technician also inspects the connectors. Before taking the unit to the service center, check the outlet and power cord — some "won't turn on" calls are solved on the spot in minutes. Often owners think it's a breakdown when the overflow protection has tripped, though all it takes is draining the water and resetting the float.

The compressor won't start

We check the start relay and compressor windings to see if the unit is repairable or needs replacement. The technician measures winding resistance, inspects the relay contacts, and checks whether the start command comes from the control board. A burnt relay is a common cause when the motor stays silent even though power is fine. When the windings are open or shorted, the unit is replaced entirely rather than rewound. If the compressor hums and won't start, don't keep turning it on — that adds load to the windings. Diagnostics are free, and the warranty on labor and parts is 1 year. A compressor dehumidifier without a working compressor doesn't dry air at all, so the relay and windings are checked first, before any conclusions about the board.

Why the dehumidifier leaks and makes noise

Leaks and noise are the second most common reasons to call a technician. Let's look at where the water on the floor comes from and why the unit hums.

Water leaks from the dehumidifier

We clean the drainage system and drain hose, and check the tank and float, because a leak almost always follows the condensate path. Moisture flows into the tray, then into the tank or directly into the drain through the hose — and any clog, kink, or crack along that route puts water on the floor. We also inspect the tank seal: over time it hardens and stops sealing the joint. If water appears when the tank is full, the cause may be a level sensor that doesn't stop the unit in time. In our practice, this fault is more common than it seems: the float sticks to the wall, and the unit keeps collecting condensate over a full tank. Before calling a technician, check that the dehumidifier isn't tilted — a tilt shifts the condensate flow away from the drain.

The dehumidifier is very noisy and vibrates

Our technician checks the fan and impeller, the compressor mounts, and filter contamination — these are the main sources of noise. The hum is divided into two types: aerodynamic whistling from a clogged coarse filter and mechanical rumbling from loose compressor mounts. The first is fixed by washing or replacing the filter, the second by tightening and replacing the vibration mounts. Over time, the fan impeller collects dust and loses balance, causing rattling at high speeds. If it hums but the fan doesn't spin, the problem may be a jammed impeller rather than the motor itself — and then replacing the motor is not needed. Listen to where the sound comes from: from below — the compressor, from the side near the grille — the fan. This will give the technician a direction even before the visit.

The dehumidifier does not turn off by humidity

We diagnose the humidity sensor (hygrostat), because it controls the shutdown of the device when the level is reached. In compressor models, the hygrostat is linked to the compressor: the sensor measures the relative humidity in the room and opens the circuit when the reading drops to the set level. The sensor gets clogged with dust, oxidizes on the contacts, or drifts — and the device dries the room without stopping. This mode leads to excess electricity consumption and extra load on the compressor, so it brings on a more serious breakdown. It's easy to check: set a high threshold and listen to see if the unit turns off after a reasonable time. If it doesn't turn off, the problem is in the sensor or in the control board that reads it. Diagnostics are free: the technician will measure the actual humidity and compare it with the hygrostat readings.

What the error code on the dehumidifier display means

A signal on the screen is not a verdict but a hint about which unit to check. We show how the technician reads the signal and what fault lies behind it.

How to read the error code

We decode the signal from the screen according to the dehumidifier model and check the unit it points to, rather than replacing parts at random. The information is output by the control board: the electronics detect a deviation from the norm in a specific circuit — hygrostat, float, compressor windings, drainage. In household models, the same symbol like E1 or F2 is tied to different units for different manufacturers, so we verify the decoding against the table for your specific brand. In our practice, technicians with 4 to 20 years of experience first take readings from the sensor referenced by the board, and only then conclude that a part needs replacing. The same symbol can mean different things on different models, so without reference to the specific unit, decoding gives nothing.

Common signals and what they mean

Signal groupWhat it indicatesWhat the technician checks
Humidity sensorhygrostat failurereadings and shutdown by level
Water level sensorfloat or tankoverflow protection activation
Drainageclog or drainhose and drain patency
Compressorstart or refrigerantrelay, windings, refrigerant leak
Control boardelectronicscontacts, display, logic errors

The same error again after repair

We re-examine a repeat signal because the return of an error usually means the symptom was fixed, not the cause. If after cleaning the drain the electronics again displays an overflow message, the technician checks the float itself and the hose connection — the clog could remain further down the drain. The return of a humidity signal is more often associated with a sensor giving false readings rather than the board: replacing the electronics in that case only postpones the repeat. We provide diagnostics free of charge and based on its results explain which unit failed and what intervention is needed. If the error returned after cleaning, it's worth checking whether the cause remains in the sensor or drainage, rather than replacing the board.

How the repair is done at home or in the service center

Some breakdowns can be fixed on-site, while others require a workshop. Here's how a service visit works, what we check during the inspection, and when the equipment is taken to the workshop.

What can be fixed on-site

We arrive at your home within 60 minutes anywhere in the city and fix on the spot those breakdowns that don't require disassembling the compressor or recharging refrigerant. In Almaty, our on-site service for dehumidifiers covers the drainage system, humidity sensors, fan, and control board — these components are accessible without opening the refrigerant circuit. The technician comes with their own tools, checks the drainage for clogs and misalignment, tests the sensors for accurate readings, inspects the fan blades for play and dirt, and tests the board. We don't look for made-up causes: first we measure, then we give a verdict. Typically, drainage, sensors, fan, and board issues are resolved on-site — those that don't require opening the circuit and vacuuming the system. This kind of dehumidifier repair in Almaty is done right at your place, without transporting the equipment to the workshop. Before calling, describe over the phone how exactly the unit is behaving — this helps us bring the necessary parts in advance.

When repair in the workshop is needed

We take to the workshop equipment that requires work on the compressor, refrigerant, or deep board repair. Replacing the compressor, finding a refrigerant leak, vacuuming the circuit, and soldering require special equipment — such operations are not done on-site. Control boards with multilayer assembly are also repaired in the workshop, where there are conditions for soldering small components. If the on-site technician sees that the case is not suitable for an on-site visit, they say so honestly before starting work, not after. You know in advance that the unit will be taken away, and you agree to it knowingly. This approach saves time for both sides: we don't waste a visit on operations that will have to be brought to the workshop anyway.

How diagnostics and approval work

Diagnostics are free, and the technician gives you the price after the inspection, once the cause is clear. First, they check component by component: power, compressor, sensors, drainage, board — and note which element has failed. Then they explain which part is being replaced and why, and only after your approval do they start work. Approval before work protects you from surprises — you know in advance why a particular replacement is needed and whether a new line will appear in the list. We provide a 1-year warranty on labor and parts, and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. If the cause turns out to be trivial — for example, a clogged drain — they will tell you right away and won't push unnecessary work.

How repair of compressor and desiccant models differs

The two types of dehumidifiers are built differently, so their breakdowns are different too. We show the scope of inspection in each case and why the troubleshooting logic changes from model to model.

How a compressor dehumidifier works

A compressor dehumidifier collects moisture through condensation on the evaporator, so the key components here are the compressor, refrigerant, and heat exchanger. The fan drives moist air through the evaporator, the surface cools below the dew point, water settles and flows into the tray, and the condenser returns heat to the air before it is released into the room. The compressor itself can fail — it stops starting or runs with overheating — as can the circuit, which loses refrigerant through microcracks in soldered joints and connections. A dust-clogged evaporator also reduces moisture collection: air doesn't reach the cold surface, settles on the dust layer, and returns warm. If such a unit doesn't collect moisture, the inspection logic goes from the compressor to a refrigerant leak, not to the electronics — the control board is usually working.

How a desiccant dehumidifier works

A desiccant dehumidifier uses a rotary drum and a heating element, so breakdowns are tied to the rotor, heating, and drive. The silica gel drum rotates slowly between two air streams: one takes moisture from the room, the other, heated by the element, dries the rotor sector and vents the vapor outside. There's no compressor or refrigerant here, but there is a drive motor, a belt or rotation gear, and a heating element with a temperature sensor. When the drum stops, moisture transfer stops and drying ceases even though the fan is running. If the heating element burns out, the rotor doesn't regenerate and becomes saturated with moisture to the limit, and a damp smell starts coming from the housing. If such a dehumidifier stops drying, the cause may be the heating element or the rotor, and there's no compressor at all.

Comparison by Components and Breakdowns

ParameterCompressorDesiccant
Key componentcompressor and refrigerantrotary drum and heating element
Common cause of "not drying"refrigerant leak, evaporator contaminationheating element or rotor failure
What the technician checkscompressor, heat exchanger, drainagerotor, heating, drive
Where repairs are more often doneon-site or at the service centerat the service center

Warranty, Diagnostics, and Dehumidifier Maintenance

Before ordering, it's useful to know the scope of the warranty, whether diagnostics are paid, and how to care for the equipment so it breaks down less often. Below are the terms of service and practical maintenance rules for a dehumidifier.

What the Warranty Covers

We provide a 1-year warranty on labor and parts, meaning we stand behind both the quality of the work performed and the parts installed. The terms are the same for compressor and desiccant models: after fixing the issue, you receive a commitment for the scope of work performed and the components replaced. If during this period a part fails or the work malfunctions, we investigate the cause again. A separate warranty on parts is important because some breakdowns recur specifically due to a part, not the work. The technician who installs a component is responsible for its lifespan just as much as for their own soldering and assembly. When contacting us, keep the description of the work performed — it makes it easier to match a recurring symptom with an already replaced element.

Why Diagnostics Are Free

Our diagnostics are free, so you pay only for the agreed scope of work, not for the inspection itself. A technician arrives within 60 minutes anywhere in the city, opens the housing, checks the compressor, sensors, drainage, and electronics, then names the cause and the scope of work. You learn the cost before work begins and decide for yourself whether to proceed or limit yourself to a consultation. Free diagnostics make sense when the technician immediately names the cause — otherwise it's just a formality. In our practice, the inspection takes as much time as finding the fault: without an accurate diagnosis, work turns into replacing components at random. This approach cuts out unnecessary work — you agree only to what actually affects the dehumidifier's operation.

Maintenance and Prevention

  • Coarse filter: rinse it as it gets dirty, otherwise airflow drops and the compressor runs overloaded.
  • Drainage and drain hose: check for clogs so condensate goes into the tank, not onto the floor.
  • Condensate tank: empty the water on time and keep an eye on the float that shuts off the unit when it overflows.
  • Humidity sensor: check that the dehumidifier turns off at the set level and doesn't run nonstop.
  • Fan: keep the impeller clean and watch for vibration and unusual humming during operation.

Dehumidifier repair questions answered simply

We've gathered the key points that determine the outcome of the work: where to look for the cause, which tasks can be handled on-site, and how to avoid the same breakdown happening again.

  • Compressor and circuit: if moisture isn't collecting, check the compressor, refrigerant, and heat exchanger, not just the control board.
  • Drainage and float: leaks and noise are more often caused by the drain hose, float sensor, and fan, rather than a major component failure.
  • Error code: the signal on the display hints at which component to inspect, but the decoding should be checked against the specific dehumidifier model.
  • Where the work is done: cleaning, drainage, and electrical issues can be resolved on-site, while work involving the compressor and refrigerant requires a service center.
  • Prevention: regular cleaning of the filter and drainage reduces the risk of repeat issues and extends the life of components.

10brands

Which dehumidifier brands we repair in Almaty

We repair dehumidifiers from popular brands. Choose a brand to see the repair details.

We also repairWe also repairTECH SERVICE09

Besides dehumidifier repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before dehumidifier repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp