Original
Manufacturer's part
- Compatibility
- Full match to model and year of manufacture
- Selection
- By the part number or E-Nr on the nameplate
- Delivery time
- Depends on supplier availability
- Warranty
- 1 year on labor and parts
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We connect your dishwasher to water, drain, and power, check for leaks, and run the first cycle.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
Freefree diagnostics
The technician unpacks the machine, connects it to the water supply and drain, builds it into the cabinetry if needed, and checks all connections for leaks. The price is quoted after free diagnostics. There is a 1-year warranty on labor and parts.
01
Step 1quick
We remove the packaging, check the contents, and inspect the body and hoses for damage.
02
Step 2quick
We install a T-fitting or connect to an existing outlet, fit a shut-off valve and a coarse filter.
03
Step 3quick
We connect the drain hose to the sink siphon or a separate outlet and set the correct loop height.
04
Step 4quick
We secure the machine in the niche, level it, attach the cabinet front, and check that the door opens freely.
05
Step 5quick
We run a short cycle and explain what to watch in the first cycles: salt level and hose position.
5
Customers order this service when buying a new dishwasher, after moving, or when replacing old appliances. The technician will unpack the machine, place it in position, connect it to the water supply and drain, check that it works, and show you how to use it.
Buying a new machine
After the new dishwasher is delivered, the technician will unpack it, inspect it for damage, and prepare it for connection.
Moving to a new home
When moving, the appliance is disconnected from its old location and reconnected at the new one, taking the layout of the utilities into account.
Replacing old appliances
The old machine is disconnected and removed, and a new one is installed and connected in its place.
Relocating to another spot
If the kitchen is being reconfigured, the technician will move the machine and extend or reroute the water supply and drain lines.
Built-in installation
The technician will secure a built-in model in the cabinet niche, level it, and connect it to the utilities.
The technician matches the error code with the manufacturer's table and checks the corresponding component: water fill, drain, heating, or motor.
Describe the symptomsThe part is selected by the number on the body or the machine model. For Bosch, the E-Nr number is on the label inside the door. The technician quotes the price after diagnostics.
Original
or
Compatible
The table shows the cost of dishwasher installation and repair: a starting labor price excluding parts and the time it takes; the technician confirms the final amount before any work begins.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
We reply during working hours
Choose a convenient time — the technician will arrive within 60 minutes anywhere in the city. When booking, provide your address and preferred time window.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Наталья С.Order No. 555643 · 24 June 2026
oursДамир М подсказал, как продлить жизнь технике. Сделали и забыл про проблему
Эльвира Д.Order No. ZK-6073 · 20 November 2025
oursСмотрел, у кого есть запчасти на такую модель. Заметил случайно: течёт. Дамир М объяснил причину так, что понял даже я. Деталь на замену — помпа. Включил, проверил, работает.
Серик М.Order No. 93900 · 10 April 2025
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Оставил заявку на ремонт посудомоечной машины. Проблема — не моет. Дамир М перезвонил, когда всё было готово. Деталь на замену — тэн. Включил, проверил, работает.
Рустам А.Order No. ZK-5710 · 28 February 2025
oursАлдын ала бірнеше жерге қоңырау шалдым, бірақ нақты жауап осында ғана алдым. Техника кенеттен істен шықты, қатты асығыс едім.
Богдан С.Order No. TS-2411-562 · 9 February 2024
oursНужен был счёт и чек, у нас техника на балансе организации. До последнего откладывал, но пришлось признать: течёт. По деньгам вышло адекватно, в другом месте просили больше. Заодно поменяли: модуль. Сначала сказали одно, потом уточнили, но в итоге всё совпало. Проверили при мне, показали, что всё держит.
Асель Ж.Order No. ZK-6646 · 1 August 2023
oursСимптом был очевидный: ошибка. Радик Т снял деталь, показал износ, вопросов не осталось. Крутит ровно, без рывков.
Эльвира Д.Order No. ZK-2023/459 · 14 July 2023
oursТехниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Бірінші рет осында жүгіндім, бұрын басқа жерге барғанмын. Кәсіби мамандар, рақмет)
Аружан К.Order No. ZK-2023/423 · 27 June 2023
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Мастер сразу сказал, что к чему, без размытых формулировок. Вернули в тот же день, всё функционирует.
Карина А.Order No. 2019-4179 · 25 November 2019
oursСмотрел, у кого есть запчасти на такую модель. Сначала думал, что ерунда, но появилось: течёт. Назвали 8 500 сразу, в конце сумма не изменилась. Поставили новую деталь: насос. Приняли без очереди, оформили за пять минут. Считаю, что нашёл своего мастера. Сделали и забыл про проблему.
Максат О.Order No. TS-4168 · 28 March 2016
oursПроблема — ошибка. Дамир М перезвонил, когда всё было готово. Уже полгода — ни одного сбоя)
Didn’t find the answer? Message us on WhatsApp.
Ask a questionThe drain hose is connected to the sink trap or a dedicated outlet through a check valve, and the hose loop is secured at a height to prevent dirty water from flowing back. After connection, the joints are checked for leaks and a test drain is run.
It should not be placed next to a stove, radiator, or other heat sources, in an unheated room, or where there is no water supply and drain. A niche without ventilation is also undesirable — exact restrictions depend on the model.
The machine is leveled, the inlet hose is connected to the water supply, the drain is routed to the trap or outlet, and the plug is inserted into a grounded socket. Then a test run is always performed and the connections are checked for leaks.
Yes, most often it is built into an existing cabinet set without modifying the countertop: the machine is secured in the niche and covered with a front panel. The technician checks the niche dimensions on site and selects the mounting for your model.
Consumables for connection are usually purchased by the owner, while the technician brings tools and everything needed for installation. What exactly needs to be purchased for your model is clarified before the visit so that installation can be done in one go.
Technically, connection to hot water is possible, but most models are designed for cold water, and hot water from the mains can be too hot and contain impurities. This reduces the service life of components, so the decision depends on the model and the condition of the pipes.

Author: Radik T.,Dishwasher repair technician
Published
Updated
Tech Service provides at-home dishwasher installation in Almaty: a technician arrives within 60 minutes anywhere in the city, performs free diagnostics, and connects the machine to water, drainage, and power with a test run. 1-year warranty on labor and parts, Kaspi QR, Kaspi Red, card, cash or bank transfer accepted.
DIY installation is possible if the utilities are ready and the model is freestanding. Otherwise, the risk of leaks and voiding the warranty outweighs the time saved.
During free diagnostics, we check water and drain points, pipe condition, outlet grounding, and the model type to accurately determine the scope of work. The technician inspects the shut-off valve and drain siphon — whether they suit the specific machine or need replacement. We measure the distance from the sink to the installation site and the drain height to ensure water flows by gravity without backflow. In a rental apartment, we assess in advance whether we can avoid drilling the countertop and tapping into the riser, so that removal during relocation leaves no traces. Based on the inspection, we provide an exact list of works and the cost — no guesswork. Request diagnostics before buying consumables: this way you won't purchase unnecessary hoses and adapters that don't fit your pipes. Dishwasher installation in Almaty starts with such a check — the technician sees all components in advance and selects the right parts.
Turnkey installation is a sequence from the technician's arrival to the test run. Each step addresses a specific risk rather than just connecting hoses.
Turnkey work includes removing transport bolts, connecting to water via a tee and shut-off valve, draining into the sewer, connecting to a grounded outlet, leveling, leak testing, and a test run. Our technician comes to your home or works in the service center — a direct contractor, not an intermediary. Dishwasher connection begins with inspecting the connection point: the technician checks water pressure, the condition of the drain riser, and outlet grounding. The tee and shut-off valve are installed so water can be shut off without dismantling the appliance, and the drain hose is secured with a loop above the pump level. Technician arrival within the city — in 60 minutes, diagnostics are free. Transport bolts are removed before the first run — if left in, the drum and mounts operate under overload, and the machine vibrates during spin.
The technician arrives with their own tools for installation and leveling, while consumables — hoses, a tee, a shut-off valve, a filter — are selected for the specific model and connection point after diagnostics. The owner needs to clear space for the appliance, provide access to the water supply and drain, and remove fragile items from the work area. Before the visit, confirm the machine model: the length of the inlet hose and the type of drain connection depend on it. A coarse filter at the water inlet protects the valve from sand and rust that clog the nozzles and cause low water pressure. The entire installation takes one visit, and we provide a 1-year warranty on labor and parts. After installation, it's best to keep the packaging and shipping bolts until the warranty ends — you'll need them for moving or service requests.
Three connections determine how the machine behaves in the first months — water supply, drain, and power. A mistake in any of them leads to leaks, error codes on the display, or warranty denial.
We connect the machine to cold water through a tee with a shut-off valve and a coarse filter — hot water from the mains can be inconsistent in temperature and contaminated with scale. The inlet hose connects the appliance to the water supply point, and the shut-off valve lets you cut off the supply without draining the entire system. In Almaty homes with iron pipes, an inlet filter is essential: rust and scale clog the inlet valve and damage the level sensor. The technician selects a tee matching the pipe diameter and checks the threaded connections before the first run, while also assessing the mains pressure and the condition of the shut-off valves. If you connect to hot water to save electricity, the appliance will get water with particles from old pipes, and the coarse filter will need cleaning much more often.
| Connection point | What we check | Risk if done wrong |
|---|---|---|
| Drain hose | Slope and loop height | Backflow of water |
| Siphon with branch | Joint tightness | Leak under the sink |
| Grounded outlet | Grounding present | Control board failure |
| Extension cord | Wire gauge and load | Overheating of wiring |
| Dedicated circuit breaker | Rating in the panel | Shutdown during washing |
| Drain pump | Joint tightness | Leak during pumping out |
The body type determines the scope of work: a freestanding unit sits on the floor without built-in installation, while a built-in model requires fitting under the countertop and hanging the cabinet door. Let's look at how these scenarios differ.
| Appliance type | What's included | What we check |
|---|---|---|
| Freestanding | Connection to water, drain, outlet | Floor levelness, clearance for hoses |
| Built-in | Installation into the niche, hanging the door | Niche width and height, countertop supports |
| Compact | Installation in a narrow cabinet | Cabinet depth, plumbing connections |
| Built-in into an assembled kitchen | Removing the door and plinth, securing | Access to the niche without removing the countertop |
Fitting a unit into an assembled kitchen set without altering the countertop is possible if there is a niche of the right width and height and water, drain, and power are connected to it. During free diagnostics, we measure the niche and compare it with the dimensions of the chosen unit — built-in models vary in height and depth by a few centimeters, and this gap determines whether the appliance will fit. If the space is already there but the countertop cannot be removed, the technician works from the front: removes the door and plinth rather than disassembling the entire kitchen set. A freestanding model in such a situation is simply rolled out onto the floor and connected without touching the furniture. For a small kitchen, a compact unit less than standard depth is often placed in a narrow cabinet — we clarify this during diagnostics before the visit so the technician brings the right fasteners.
After installation, the most important thing is to understand who is responsible for the result. With a direct contractor who has their own technicians, responsibility is not diluted among subcontractors, and the warranty is held by the person who performed the work.
We provide a 1-year warranty on labor and parts — if a connection leaks after installation or the machine shows an error related to our work, the visit and fix are covered by the warranty. Before handing over, the technician checks the tightness of all joints and does a test run with filling and draining water to see how the hoses and seals behave under pressure. Responsibility lies entirely with us: you don't need to figure out who installed the hose and who connected the power — one person accepts the work and is responsible for the result. The first signs of improper installation are moisture under the machine, vibration during operation, and a water fill error; it's best to show these to the technician right away rather than wait for the leak to reach the neighbors.
Tech Service is a direct contractor with its own technicians with 4 to 20 years of experience: arrival within 60 minutes across the city, free diagnostics, and a 1-year warranty on labor and parts. The dishwasher installation is done by our own technician, not a third-party subcontractor selected from a request — so the same organization is responsible for the quality of work and for the consequences. With an aggregator, the installation is performed by a contractor you didn't choose, and the warranty has to be claimed through an intermediary; with a private technician, you can only make a claim to them personally, and if they stop answering the phone, the conversation ends. In my opinion, the difference shows up precisely in a disputed situation: when something leaks, what matters is not advertising but a specific address to file a claim. With a direct contractor, responsibility is the same at all stages — from diagnostics to the warranty visit.
Dishwasher installation comes down to a few decisions: whether to do the work yourself, what turnkey installation includes, and by what criterion to choose a contractor.

If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
Dishwasher error codes are the codes on the display that point to a specific component: water fill or drain, heating, sensors, or the door.
3 December 2025 · 14 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read