experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Free diagnostics and a technician at your door within 60 minutes anywhere in the city. 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will pinpoint the exact issue during free diagnostics.
yeast, temperature sensor, heating element
from6 000 ₸
outlet, power cord, fuse
from3 500 ₸
belt, bearing, shaft mount
from6 000 ₸
belt, motor, paddle
from14 500 ₸
temperature sensor, heating element, thermostat
from6 000 ₸
latch, hinges, misaligned body
from3 000 ₸
seal, pan, overloading
from6 000 ₸
drive, shaft, motor
from14 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 6 000 ₸cost

BeforeAfter5 steps

From request to final check — five clear steps.
Leave a request and the technician will agree on a convenient visit time.
Clear access to the outlet and work surface, and have the pan and paddle ready.
The technician checks fasteners and gaskets so nothing gets lost during reassembly.
Once the price is agreed, the technician performs the repair.
The technician cleans up dough residue and dust, and puts the pan and paddle back in place.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Choose a convenient visit window — agree on a time so the technician arrives when the bakery isn't kneading.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Гульмира С.Order No. 2025-1983 · 8 November 2025
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Внешне как новый, если не считать мелкой царапины.
Айгерим Б.Order No. TS-2505-571 · 3 May 2025
oursДо этого обращался в другой сервис, там только развели руками. Самое обидное — поломка случилась не вовремя. Жалоба простая: не месит. Проверил дома — всё на месте, ничего не забыли
Алмас Д.Order No. TS-2404-809 · 5 April 2024
oursДамир М честно сказал, что менять, а что ещё походит. Ребёнок уже проверил на прочность, держиться.
Сауле Н.Order No. ZK-2023/126 · 22 July 2023
oursЖалоба простая: не печёт. Отдельно спасибо мастеру — Радик Т, терпения ему хватило. С тех пор ни разу не подвёл
Павел Ш.Order No. 677582 · 7 June 2023
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Обидно было, техника не старая совсем. Проблема — не месит. Радик Т всё объяснил и не пытался впарить лишнее. Поменяли: тэн. Второй месяц — полёт нормальный.
Ольга М.Order No. 2023-2745 · 6 February 2023
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Сдал в ремант: хлебопечка. Симптом был очевидный: не печёт. Радик Т помог выбрать, без навязывания. Уже полгода — ни одного сбоя.
Арман К.Order No. 57811 · 29 December 2021
oursПоломка застала перед командировкой, тянуть было нельзя. Обидно было, техника не старая совсем. С чем пришёл: не месит. В списке работ — двигатель. Заплатил 16 500, и не жалею. Сначала сказали одно, потом уточнили, но в итоге всё совпало. В помещении тесновато, но это мелочи. Рекомендую. Включил, проверил, работает)
Томирис Ж.Order No. 70669 · 25 November 2021
oursСимптом был очевидный: не печёт. Радик Т объяснил причину так, что понял даже я. Ребёнок уже проверил на прочность, держиться!!
Талгат С.Order No. 2021-4302 · 23 February 2021
oursЖұмыстан кейін үлгеру үшін жақын жердегі шеберхана іздедім. Алдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды. Жалпы әсер жақсы, кемшілік байқамадым.
Рустам А.Order No. 87393 · 4 November 2017
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Основная жалоба — не месит. Внешне как новый, если не считать мелкой царапины.
Павел Ш.Order No. ZK-2956 · 29 March 2017
oursПозвонил в три места, здесь единственные назвали цену сразу. Больше всего напрягало: не печёт. Починили и дали гарантию на месяц.
Данияр С.Order No. TS-1605-419 · 25 May 2016
oursБірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Кепілдік берді, бұл мен үшін маңызды. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Жұмыс барысын көрсетіп отырды, жасырған жоқ. Бағасы базардағыдан қымбат емес. Бір айдан бері ешқандай мәселе жоқ
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, most common issues — the belt, heating element, sensor, buttons, power cord — are fixed on site by a technician. If board soldering or complex gearbox repair is needed, the appliance is taken to the service center. Diagnostics are free.
Yes, we repair these brands, just like Panasonic, LG, and others. We provide a 1-year warranty on labor and installed parts, including a new heating element or motor.
First check the outlet and power cord, then try resetting the program by unplugging the appliance. If the panel doesn't respond, it's likely the buttons or control board — this is fixed at the service center.
Most often the drive belt has slipped or broken, less often the coupling or gearbox is worn. The motor itself may be fine. The exact cause will be determined by a technician after disassembly, depending on the model.
It's better not to use it: a burning smell usually comes from overheating wiring, the heating element, or the motor, and that's a risk of short circuit and fire. Unplug the appliance and call a technician for diagnostics.
The cause is usually the heating element, temperature sensor, or power circuit on the board. Testing the components will show what exactly broke. It depends on the model, so guessing without diagnostics is pointless.
Tech Service repairs bread makers in Almaty as a direct provider, without aggregators or middlemen. Our technician arrives at your home within 60 minutes anywhere in the city or takes the appliance to the service center. Diagnostics are free, and the cost is quoted after diagnostics. We provide a 1-year warranty on labor and parts.
A bread maker doesn't break "in general" — it breaks in specific components. Below we break down common symptoms and what's behind them, so you know what to tell the technician.
Most often, "won't turn on" isn't the whole appliance burning out — it's the power circuit, the lid lock mechanism, or the control board that won't let the program start. The electronic module stores all modes in memory and displays them on the screen, so when it fails, the buttons stop responding and the display goes dark. The lid lock is the second most common culprit: if the latch doesn't reach the sensor, the start is blocked, since the manufacturer built in protection against starting with the lid open. The third possibility is the delay timer accidentally set many hours ahead: the panel lights up but mixing doesn't start. If the screen comes on but the program won't start, it's almost always the buttons or the lid sensor, not the motor — so don't write off the appliance just yet. If you need bread maker repair in Almaty, just tell the technician the symptom to narrow down the fault.
The heating element and temperature sensor are responsible for heating the pan, while noise and burning smell almost always come from the paddle drive — the belt, coupling, or motor, which wear out when kneading dense dough. The heating element works from below, and the temperature sensor tells the electronics when to reduce heat; if it's inaccurate, the dough either doesn't rise or burns on top. The drive belt stretches over time and starts to slip — hence the unusual hum and jerking during kneading. The coupling wears out faster with stiff dough: the paddle spins freely and kneading doesn't happen. Burning smell is the one symptom where you should immediately unplug the appliance and not start it until inspected: overheated wiring is more dangerous than it seems, and it won't go away on its own.
| Symptom | Likely cause | What the technician checks |
|---|---|---|
| Won't turn on | power circuit, lock, board | power, lock, electronics |
| Doesn't heat or heats intermittently | heating element, temperature sensor | coil resistance, sensor readings |
| Paddle doesn't spin | belt, coupling, motor | belt, coupling, shaft rotation |
| Noisy during kneading | worn belt, bearing | drive, motor mount |
| Burning smell | overheated wiring, heating element | wiring, heater, contacts |
| Error code on display | electronics, sensors | code decoding, sensor readings |
| Leaks from the bottom | shaft seal, pan crack | seal, pan integrity |
| Dough doesn't rise | sensor, heater, recipe | heating, sensor readings, mode |
You don't always need to take the bread maker to the workshop — some faults can be fixed right in your kitchen. Here's what the technician handles on-site and what requires disassembling the body and working with electronics.
At home, we fix issues that don't require a test bench or full disassembly: we replace the drive belt or coupling, the oil seal, check and replace the heating element, temperature sensor, repair the lid mechanism and lock. Our technician arrives with their own tools and common spare parts — consumables are installed on the spot, so you don't have to hunt for parts in stores. If a rare component for a specific model is needed, we'll agree on it with you and bring it on a follow-up visit. This kind of bread maker repair at home in Almaty covers most requests: leaking oil seal, slipping belt, heating element not heating, lid lock not holding. So you don't need to look for consumables yourself — common parts are already in the technician's bag, and rare ones will be delivered after approval. This format saves you travel: the appliance stays in place and keeps working after the unit is replaced.
We take the appliance to the workshop when work on the control board, motor replacement, or electronics soldering is needed — this requires disassembling the case and working with the board, which can't be done neatly in your kitchen. The control board is responsible for programs and error codes, the motor turns the paddle, and both units require access to the inside of the appliance and testing under load. A specialist during free diagnostics determines whether the breakdown falls into this category. If they see that the case is a service one, they say so right away instead of disassembling the bread maker at home for nothing — you pay only for the actual work. This approach saves time: instead of two visits, you immediately get a clear plan of work for the specific unit and understand which part will be replaced.
| What we repair | At home | At the service center |
|---|---|---|
| Drive belt and coupling | yes | yes |
| Shaft oil seal | yes | yes |
| Heating element and temperature sensor | yes | yes |
| Lid mechanism and lock | yes | yes |
| Control board | no | yes |
| Drive motor | no | yes |
| Electronics soldering | no | yes |
Diagnostics is the first step in restoring a bread maker, and it's free with us. Here's what the technician checks and when you learn the cost of work.
During free diagnostics, we check the power supply and control board, the heating element's heating and temperature sensor readings, motor rotation and belt condition, the oil seal and lid mechanism — we go through all the units that cause your symptoms. First, the technician inspects the bread maker from the outside: looks for signs of overheating on the case, panel gaps, stains on the bottom — they indicate an oil seal leak. Then they test the heating element and compare resistance with the norm for the specific model Panasonic, Moulinex, Redmond. Separately, they listen to the motor under load and check belt tension: slipping causes a characteristic jerk during kneading. Diagnostics are free regardless of whether you agree to the repair or not — this lets you first understand the cause and then decide, instead of paying for a blind inspection.
The technician quotes the cost after free diagnostics, when the cause and scope of work are clear — before that, naming a figure would be guessing. The cause is only visible after disassembly and checking the units: a complaint of "not heating" in a Panasonic bread maker turns out to be a failed heating element, while in a Moulinex it's oxidized contacts on the board or a temperature sensor failure. The belt, oil seal, and control board cost and are replaced differently, so the amount depends on what is confirmed during inspection. We show the worn part and explain why it needs replacement, rather than just naming the total. This order protects against surprises: you approve the work and parts in advance and know exactly what you're paying for, instead of finding out the total after the work is done.
You can book a diagnostic by leaving a request on the website — a technician arrives at your home within 60 minutes anywhere in the city, and you can pay for the work in any convenient way. In your request, specify the bread maker model and what exactly is happening: it won't turn on, won't start a program, won't heat, makes noise while kneading, leaks from the bottom, shows an error code on the display. The technician uses these details to bring the necessary parts right away and avoid a second visit. If the symptom is intermittent — the appliance sometimes doesn't heat or makes noise — describe in your request which programs it happens on: at what stage of baking, with what loaf weight, after how much operating time. Such a description makes it easier to predict the faulty unit before the visit. Diagnostics at home are free, and based on the results you decide whether to repair the bread maker or not.
After a repair, it's important to understand how the appliance will behave going forward. We provide a 1-year warranty on labor and parts — let's break down what that means in practice.
Our 1-year warranty covers both the technician's labor and the installed parts — if a replaced heating element, belt, or motor fails again, we take care of it under the warranty. The heating element, drive belt, and motor are the three most stressed components in a bread maker, and they are the ones most often replaced. The coil operates under constant heating cycles, the belt experiences jerks during kneading of dense dough, and the motor pulls the paddle through the thick mass. The conditions are the same for both labor and parts: it doesn't matter what failed — the soldering or the part itself, we handle it. A warranty on components is just as important as on labor: a low-quality part shows itself in the first months, and you're not left to deal with it alone.
A breakdown after service is more often due to a part that couldn't handle the load rather than a technician's mistake, so the warranty should cover both labor and the part. A specialist can install a component carefully and correctly, but if the part itself is defective or not designed for the lifespan, it will fail within a few weeks. A bread maker operates under tough conditions: heating alternates with kneading, flour and moisture accumulate inside, and the mechanisms experience vibration. In such conditions, the quality of a part becomes obvious quickly — a good one lasts for years, a weak one gives up in the first months. When asking about the warranty, clarify this point: services often provide it only for labor, and then you have to pay again for a repeat replacement of the part.
If after service the bread maker acts up again, contact us and describe the symptom — under the warranty we will identify the cause and fix it. Just say what exactly changed: a program won't start, it doesn't heat, there's a smell or unusual noise. From the description, the technician already knows where to look and compares it with what was done during service. Then we check whether the new malfunction is related to the replaced part or is a separate mechanism — that determines whether the situation is covered by the warranty. Don't try to disassemble the bread maker yourself after service: interfering with a mechanism that was under warranty complicates the situation, even if you meant well.
Different bread maker brands have their own weak points and their own error code logic. Here are the brands we service and the typical complaints their owners have.
Panasonic, Moulinex, and Redmond bread makers come to us more often than others. With Panasonic, the electronic module and temperature sensor often fail; with Moulinex, the program won't start; with Redmond, the paddle drive and belt are common issues. For Panasonic, a typical case: the unit turns on but the dough doesn't rise because the sensor misreads the chamber temperature. For Moulinex, we get complaints about buttons and the lid lock — the cycle won't start until the contact engages. For Redmond, the technician first checks the belt, coupling, and motor if the paddle stops turning. Error codes on the display for these brands are decoded differently, so when you call, tell us the model — the specialist will know in advance what kind of fault logic they're dealing with.
We also service Ardesto, Ava, Rondell, Philips, and BORK bread makers — a rare brand is no reason to refuse service; their components are largely similar to common models. With Ardesto and Ava, the heating element and oil seal often fail: heating stops or a leak appears along the shaft. With Rondell and Philips, pay attention to the lid mechanism and sensor — the lock doesn't engage and the cycle won't start. With BORK, the main area is the electronic module; the rest of the internals last longer. For rare brands, parts are harder to find, so it's important for the technician to know the exact model in advance — that way they can assess whether a part is available before the visit. Diagnostics are free, and we provide a 1-year warranty on labor and parts.
| Brand | Common faults | What we check |
|---|---|---|
| Panasonic | electronics, temperature sensor | module, sensor |
| Moulinex | program won't start, buttons | board, buttons, lock |
| Redmond | paddle drive, belt | belt, coupling, motor |
| Ardesto, Ava | heating element, oil seal | heating, shaft seal |
| Rondell, Philips | lid mechanism, sensor | lock, sensor |
| BORK | electronic module | board |
When a bread maker breaks down, the owner faces two questions: fix it or replace it, and who to trust with the job. Let's look at both calmly, without pushing.
Repair usually makes sense when a single component fails — heating element, belt, oil seal, or sensor — and the housing, pan, and electronics are intact. Replacing the appliance is more logical when the board is seriously damaged along with the housing: a burnt controller often takes burnt traces and connectors with it, and the baking pan itself is deformed or burnt through. In our practice, "not heating" equally often means a cheap temperature sensor, a shorted heating element, or a control board that has gone into error — the symptom is the same, but the cause is different each time. That's why you should decide after diagnostics, not based on an external sign: the difference between replacing a sensor and resoldering a board is crucial. Focus on the condition of the housing and electronics, not the age of the device.
When choosing a technician, look at three things: whether they work directly or through an aggregator, whether diagnostics are free, and whether they provide a warranty on parts — with us, all three align. A technician aggregator adds a middleman to the job, so you pay more for the same work, and often there's no one to hold accountable for the result: the contractor came on request and left. A direct contractor is responsible for the work themselves, and their warranty is not a formality but a commitment to you. Ask about diagnostics before booking — whether it's paid or not; ours is free, and the technician quotes the price only after inspection. Check whether the warranty covers parts, not just labor: with us, it's a year for both. And verify who exactly will come — a staff technician or a subcontractor.
Tech Service is a direct provider: our technicians have 4 to 20 years of experience, so the same team takes your request and does the job—no middlemen. A technician arrives within 60 minutes in the city, diagnostics are free, there's a 1-year warranty on labor and parts, and you can pay any way you like. When a technician is on staff rather than sent by a marketplace, they care about making sure the unit doesn't break again—their own warranty and reputation with you depend on it. A marketplace just wants the job marked as closed; a staff technician wants your bread maker to last the season without a comeback. In my view, that's the main argument for going direct: the person holding the tools is the one accountable for the result.
Here's what to keep in mind when your bread maker stops working—from the first symptom to choosing who fixes it, how, and what the warranty covers.
10brands
Our technicians work with popular home appliance brands. Choose a brand to see the repair details.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












