Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a intercom and video intercom

Intercom and Video Intercom Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Vasiliy Z.Maulet T.Madi T.Ivan K.

Repair prices

  • Tube replacementfrom4 000 ₸
  • Exit button replacementfrom4 500 ₸
  • Video intercom repairfrom5 000 ₸
  • Audio intercom repairfrom5 000 ₸
  • Call-out and diagnosticsfrom5 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common intercom faults in Almaty

Pick your symptom to see which component we check first.

PricesPricesTECH SERVICE03

How much intercom repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Tube replacementparts not included

1–3 hours

from4 000 ₸

Exit button replacementparts not included

1–2 hours

from4 500 ₸

Video intercom repairparts not included

1–3 hours

from5 000 ₸

Audio intercom repairparts not included

1–3 hours

from5 000 ₸

Call-out and diagnosticsexact price — after the free diagnostics

30–60 min

from5 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after intercom repair in Almaty

Burnt power supply

1 visittime

from 5,500 ₸cost

Problem
The intercom would not turn on: after a voltage surge, a blackened capacitor, signs of heating, and a melted component were visible inside the power supply.
What we did
The technician performed diagnostics, confirmed the power supply had failed, and replaced it, checking the soldering and connections.
Result
The intercom turns on again and works stably; the technician checked the call and door opening. 1-year warranty on labor and parts.
I want the same
Intercom: burnt power supply — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How intercom repair works on site in Almaty

The workflow from request to checking the result.

  1. Requestsame day

    We take your request, confirm the address and the symptoms.

  2. Preparationbefore arrival

    Make sure the technician can access the electrical panel, entry panel and handset.

  3. Diagnosticsfree

    The technician checks the power supply, line, panel, handset and lock.

  4. Repairby appointment

    We agree on the scope of work with you before starting.

  5. Checkafter repair

    The technician shows you the result and answers questions about the warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our digital electronics repair technicians in Almaty

The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

  • 7 technicians in Almaty
  • 7–18 years of experience in the department
  • Article author Vasiliy Z., 10 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 7 specializations — they are listed on the technicians' cards.

01 / 07
Vasiliy Z., senior TV repair technicianexperience10 years

Vasiliy Z.

Senior TV repair technician

Maulet T., TV board repair technicianexperience10 years

Maulet T.

TV board repair technician

Madi T., electromechanical technicianexperience10 years

Madi T.

Electromechanical technician

Ivan K., audio and DVD repair technicianexperience13 years

Ivan K.

Audio and DVD repair technician

Nikolay K., smartphone repair technicianexperience18 years

Nikolay K.

Smartphone repair technician

Aleksandr L., screen and battery replacement technicianexperience8 years

Aleksandr L.

Screen and battery replacement technician

Bakdaulet E., game console repair technicianexperience7 years

Bakdaulet E.

Game console repair technician

We reply during working hours

Book intercom repair in Almaty

Describe the symptoms and your intercom model in the request so the technician arrives prepared.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE06

Reviews of intercom repair in Almaty

Максим Ю.Order No. TS-2604-156 · 13 October 2026

ours

Сергей Москоленко честно сказал, что менять, а что ещё походит. Проверил дома — всё на месте, ничего не забыли.

Repair: intercom and video intercom repair in

Данияр С.Order No. ZK-5471 · 30 September 2026

ours

Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Обратился по поводу видеодомофона. Проблема — не звонит. Сергей Москоленко помог выбрать, без навязывания. По цене не скажу, что дёшево, но справедливо. Пользуюсь ежедневно, вопросов нет.

Repair: intercom and video intercom repair in

Рустам А.Order No. ZK-2026/114 · 10 August 2026

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Проблема — не звонит. Проверили на всех режимах, всё чётко.

Repair: intercom and video intercom repair in

Даулет С.Order No. TS-2608-759 · 21 March 2026

ours

Алдын ала бірнеше жерге қоңырау шалдым, бірақ нақты жауап осында ғана алдым. Телефонмен кеңес сұрадым, тегін айтты. Мастер кешке дейін күтпей, сол күні аяқтады. Жұмыс сапасы жақсы, артық шуы жоқ. Ескі бөлшекті қайтарып берді, әдетте олай жасамайды. Бағасы базардағыдан қымбат емес. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Ұсынамын, текке ақша алмайды.

Repair: intercom and video intercom repair in

Аида Т.Order No. ZK-6083 · 18 October 2025

ours

Алдын ала бірнеше жерге қоңырау шалдым, бірақ нақты жауап осында ғана алдым. Балалар бар, техникасыз қиын, сондықтан тез жөндеу керек еді.

Repair: intercom and video intercom repair in

Евгений М.Order No. 12810 · 5 October 2025

ours

Жалоба простая: нет изображения. Дамир М перезвонил, когда всё было готово. Внешне как новый, если не считать мелкой царапины.

Repair: intercom and video intercom repair in

Даулет С.Order No. TS-2507-373 · 27 July 2025

ours

Смотрел, у кого есть запчасти на такую модель. Утром работало, днём сломалось, вечером я уже искал сервис. Симптом был очевидный: не звонит. Дамир М подсказал, как продлить жизнь технике. Поменяли: монитор. Приехал вечером, мастер ещё был на месте. Оплатил картой, чек дали. Уже полгода — ни одного сбоя.

Repair: intercom and video intercom repair in

Куаныш Б.Order No. 66868 · 30 June 2025

ours

Повод для визита: не звонит. Сергей Москоленко всё объяснил и не пытался впарить лишнее. Функции все на месте, ничего не отвалилось)

Repair: intercom and video intercom repair in

Нурасыл М.Order No. TS-2510-965 · 6 June 2025

ours

Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Техника работала годами, а тут — нет изображения. Приняли без очереди, оформили за пять минут. Под замену пошло: плата. Даже с учётом запчасти вышло гумано. Сделали аккуратно, следов разборки не видно.

Repair: intercom and video intercom repair in

Светлана Д.Order No. ZK-1893 · 31 May 2025

ours

Симптом был очевидный: не открывает. Сергей Москоленко не стал навязывать дорогую запчасть, поставил нормальную. Прошивку не тронули, всё как было.

Repair: intercom and video intercom repair in
Questions and answersQuestionsTECH SERVICE07

Questions about intercom repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Who should I call to get an intercom installed?

Contact a service that handles both intercom repair and installation: a technician will come to your home, help you choose a model that fits your building entrance, and connect it. At Tech Service, we install and service intercoms and video intercoms, and diagnostics before any work is free.

How do I call someone on the intercom?

Dial the apartment number on the panel and press the call button — the handset in the apartment will ring. If the call doesn't go through, check whether the handset is off the hook and whether the panel backlight is working. If there's a line or unit failure, you'll need a technician.

Can an intercom be repaired if it's been flooded with water or after a power surge?

Yes, in most cases such an intercom can be repaired: the technician dries the board, checks the power supply, and replaces any burnt-out components. Free diagnostics will show exactly what's damaged, and we provide a 1-year warranty on labor and parts.

Do you repair Commax, Cyfral, and Vizit intercoms?

Yes, these brands are among the most common, and our technicians work with them regularly. Repairs are possible for video intercoms, call panels, and power supplies from these manufacturers, depending on the model and the specific fault.

Can a video intercom be repaired if the camera or screen isn't working?

Yes, usually the problem is local: a loose contact, a failed camera module, or a monitor backlight issue. A technician will check the camera, cables, and power supply at your home and tell you what's cheaper — replacing the component or the whole device.

Why can't I hear the intercom — is it a quiet speaker or a line problem?

The cause could be the handset speaker itself, the volume control, or a damaged line between the panel and the apartment. The technician will test the line and check the handset to determine exactly what needs replacing and what just needs adjusting.

Repair guideArticleTECH SERVICE08

Doorphone repair in Almaty with technician visit and 1-year warranty

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs audio and video doorphones in Almaty: our technician arrives at your home within 60 minutes or you can bring the device to our service center. Diagnostics are free, and we quote the price after diagnostics. We provide a 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience fix the root cause, not just the symptom.

Why doorphone repair is needed when malfunctions occur and what the symptoms mean

A doorphone breaks for specific reasons, and the symptom usually points to a particular component: the call panel, the handset, the lock, the power supply, or the communication line. Here's what each sign means.

The doorphone doesn't open the door even though the call goes through

If the call to the apartment goes through but the door doesn't open, the most common culprit is the electromagnetic or electromechanical lock, and less often the controller that manages it. The subscriber handset only sends a command in this scheme, while the lock does the actual work: an electromagnetic lock loses its hold when power is removed, and an electromechanical one triggers a retracting coil with a latch. The controller receives the signal from the handset and the key reader, converts it into a pulse of the required duration, and supplies power to the lock. Our technician traces the entire circuit from the handset to the lock during free diagnostics. A simple check: hold a key to the reader—if the lock clicks from the tag but not from the handset, the problem is in the control circuit, not the lock itself.

The doorphone doesn't ring in the apartment or the resident can't be heard

Silence in the handset or a quiet speaker points to three components—the call panel, the communication line, or the handset itself—and the exact culprit can only be identified during diagnostics. The call panel contains a speaker and a microphone: if the speaker crackles or is silent, sound doesn't reach the apartment, and the microphone may fail to transmit the resident's voice back. The communication line—the cable between the panel and the apartment—suffers from moisture, contact oxidation, and mechanical damage, causing the signal to fade in a specific section. The subscriber handset connects to the call panel via the line and the switch, so a break can occur anywhere. If sound is lost in all apartments of the entrance at once, look for the cause in the panel or the line, not the apartment handset—this narrows the search even before the visit.

The doorphone beeps, shows an error code, or stops working after a power surge

Beeping and an error code are the controller's signal of a power or line failure, and after a power surge or water ingress, the power supply is most often damaged. The power supply feeds the call panel, the lock, and the handset, so its failure disables several functions at once. A power surge in the grid or a lightning strike near the building can blow capacitors and stabilizers, while moisture on the board causes trace oxidation and short circuits. In such cases, the controller displays an error code or intermittent beeping but remains functional—there's no point in replacing it prematurely. After a thunderstorm or a power surge, don't turn the doorphone back on until diagnostics are done—reapplying power can finish off the surviving components.

How doorphone repair in Almaty works

Doorphone repair in Almaty starts with free diagnostics and ends with an on-site check of the result. Here are the steps our technician follows and what you should personally verify.

Free diagnostics and fault finding

We start with free diagnostics: the technician checks the communication line, power supply, handset, and lock one by one to find the real cause rather than replacing the first suspicious part. First, the line from the call panel to the apartment is tested—a break or oxidized contacts produce the same symptoms as a burned-out module. Then the voltage at the power supply is measured: a drop below the operating threshold disrupts calling and door opening. After that, the handset and the electromagnetic lock are tested—a sticking latch or worn coil shows up as 'the door won't open.' We also check the call button and the panel microphone separately: a stuck button or a clogged membrane can mimic a board failure. Ask the technician to name the verified component and show the faulty part—this way you can see the work was done based on an actual fault, not just 'to be safe.'

Replacing components and adjusting after the work

After the inspection, we replace the faulty component and reconfigure the intercom, then test the call, sound, and door release on site. Replacing the call panel, handset, power supply, or key reader takes less time than finding the cause: the new unit is installed in its original place and connected to the same line. Configuration restores the working parameters—volume level, lock activation threshold, and key binding to the reader. If the panel was replaced, we re-enter the apartment numbers so calls go to the right address. We test in your presence—call the apartment from the panel and open the door with the handset and key: this way you can see that the whole chain works, not just the replaced part.

How long does the work take and what affects the cost

The technician gives you the price after a free diagnostic, once the cause and the needed component are clear, and the work time depends on which unit has failed. Replacing a handset and power supply is one thing; restoring the communication line along the riser and repairing a panel with a circuit board is another: the deeper the fault, the more operations are needed. The final amount depends on the type of component, not on the address or floor, so it's impossible to give an honest price over the phone in advance. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. Don't agree to a "ballpark price over the phone" before inspection—without testing, any sum is a guess, and an honest technician will only name it after seeing the problem. If the cause turns out to be in the board or the line, the technician will explain what operations are needed and why the price can't be given without an inspection.

Which intercoms and brands we repair

We service both audio and video intercoms of various types and brands. Below are the models people ask about most often and what typically fails in them.

Types of intercoms and what breaks most often

Intercom typeWhat breaks most oftenWhat we check
Audio intercomhandset, speaker, lockline, panel, handset
Video intercomcamera, screen, backlightcamera, monitor, power
GSM intercomGSM module, phone callmodule, SIM slot, power
IP intercomnetwork module, controllernetwork, controller, power
Wiredcable, communication lineline integrity, contacts
Wirelessradio module, batterypair connection, batteries

Video intercoms with a non-working camera or screen

If a video intercom's camera doesn't work or the screen has gone dark, we check the power, the cable, and the module itself—most often one of these three is to blame, not the whole device. The camera on the call panel is responsible for the picture, and the monitor in the apartment for displaying it, so a failure in one unit doesn't kill the other. The power supply sags under load: the backlight dims, the image flickers, the screen goes dark when someone calls. The cable between the panel and the monitor wears out at bends and where it enters the wall. Our technicians check each unit separately and replace only the faulty one. A scratched or compressed image that eventually disappears is an early sign of a problem with the cable or camera power, and it's cheaper to fix before it completely fails.

Commax, Cyfral, Vizit intercoms and GSM models

We work with devices from various brands, including Commax, Cyfral, and Vizit, as well as GSM models where the call goes to a phone instead of an apartment handset. With Commax and Cyfral, the call panels suffer most often: buttons stick, the key reader stops seeing the fob, the speaker crackles from moisture. With Vizit, the panel's power supply or the building controller often fails. In GSM intercoms, calling a phone depends on the GSM module and SIM slot: the module loses network, contacts oxidize, power sags. During diagnostics, the technician determines which unit is causing the failure. In GSM intercoms, the breakdown often masquerades as "no signal"—check the module and power before changing the SIM card or plan.

Repair at home or at the service center

Not every repair requires a trip to the service center. Here's when a technician visit to your home is enough, and when it's better to bring the device to the workshop.

When a technician visit to your home is enough

The technician arrives at your home within 60 minutes anywhere in the city, and most faults — lock, handset, line, power — are fixed on the spot. A home visit covers typical cases: the electromagnetic lock doesn't engage, communication between the panel and the apartment is lost, settings get messed up after a power surge, contacts in the call button oxidize. We provide free diagnostics at your home: the technician tests the line, checks the power supply of the unit and the condition of the lock, then names the cause and scope of work. For a wall-mounted apartment device, this format saves time — you don't need to remove the handset from its mount and carry it across town. A home visit is convenient when the intercom is in the entrance hall or on the wall and can't be removed without dismantling — then on-site repair preserves the connection and saves you from reconfiguring the line.

When it's better to bring the intercom to the service center

If the fault requires disassembly and work on the circuit board, it's more convenient to bring the device to the service center — there it is tested and repaired in proper conditions. The control board, the call panel processor, the key memory module — these components require a soldering station and stable power, which can't be provided on a stairwell. At the service center, the technician opens the case, inspects the traces for burns and cracks, checks capacitors and microchips, and replaces components if necessary. Service center repair is also suitable for video intercoms with a damaged screen or camera: replacing the display and lens requires care and a clean surface. Before you go, take a photo of the wiring diagram and label the wires — this way reinstallation will go smoothly without confusion in the line.

How we check the result after repair

After repair, we check the entire chain — call from the panel, sound in the handset, door opening with the handset and key — to make sure not only the replaced part works. First, the technician presses the call button on the call panel and listens for the signal in the apartment, then checks the volume and clarity of speech in both directions. Next — opening the lock with the handset, the exit button, and the key via the reader: if at least one method fails, the cause is not fixed. Setup and testing take separate time, and we don't consider the repair complete until the whole system works. If after repair only the settings are reset but the cause remains, the breakdown will return within days — so testing must cover the entire system, not just one component.

Warranty and repair transparency

A warranty and clear terms remove the main fear — 'it'll be fixed and break again.' Here's what exactly we guarantee, how we quote the price, and who is responsible for the result.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts — if the fault returns within this period due to our fault, we fix it under warranty. The commitment covers everything the specialist touched: replacement of the call panel, repair of the power supply, setup of the handset in the apartment, reflashing of the controller. Twelve months is enough time for soldering errors, a hidden defect in a new part, or corrupted firmware to show up. In our service center, a warranty case is re-examined and fixed free of charge if the breakdown is related to the work performed or the component supplied. But the warranty on a part and on labor are different things: clarify what exactly is covered so that you're not left without support if the breakdown recurs. Ask about this before work begins, not after — it's easier to understand what the service center is responsible for six months later.

Free diagnostics and no surprise costs

Our diagnostics are free, and the technician gives you the price after the diagnosis — when the cause and the needed part are known, not some “average price over the phone.” We first check the power, the communication line, and the lock itself, then open up the entry panel or the unit to see the condition of the board and contacts. Only after that do we explain which component failed and what to do about it: re-solder a trace, replace a button, install a new unit. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. This transparent approach — cause first, price second — protects you from unnecessary work: you pay for the specific component that was fixed, not for “diagnostics in general.” In my view, this order is what separates a proper service from a hastily quoted price: the technician first proves the cause, and only then talks about the fix.

Experienced technicians, direct contractors with no middlemen

Tech Service is a direct contractor with its own technicians who have 4 to 20 years of experience, not an aggregator or a middleman, so the person who does the work is the one who stands behind it. The technician comes to your home or takes the equipment to the service center, runs the diagnostics, and fixes the problem — there’s no dispatcher between you and the person with the soldering iron passing the request along. A call within the city takes up to 60 minutes. A middleman has no warranty of their own on the work performed — ask who exactly will come and who is responsible for the result. The difference is clear from the first call: a direct contractor names the technician and takes on the obligation, while a reseller just forwards the request.

Entrance intercoms and choosing a technician

Entrance intercoms aren’t only the residents’ responsibility, and that affects who you should call. Here’s how to sort out who’s responsible for what and choose the right contractor.

Who is responsible for the entrance intercom

The building’s maintenance company is usually responsible for the entrance intercom, while the owner is responsible for the apartment and its handset, so it’s best to start by clarifying who’s responsible for what. The maintenance company handles the shared power supply, controller, lock, and the riser line; the resident is responsible for the unit in the hallway and its connection. If the call doesn’t work throughout the entire entrance, that points to a shared fault — the controller, power supply, or line. If only one apartment is affected, the problem is more often in the subscriber unit or its cable. This approach saves time: you don’t need to call a technician to your place when the cause is outside. If the whole entrance is down rather than just one apartment, it’s usually resolved through the maintenance company — that saves residents time and money.

How to choose an intercom repair technician

  • Who will come: ask whether it’s their own technician or an outside contractor, and who will be responsible for the result.
  • Warranty: ask what exactly it covers — labor, parts, or both.
  • Cost: the technician gives you the price after a free diagnosis, not over the phone before seeing the problem.
  • Diagnostics: a free inspection before repair is a sign of a transparent approach, not an excuse for unnecessary work.
  • Checking the result: they should show you the work on site — by calling from the apartment and opening the lock.
  • Direct contractor: with a middleman or aggregator, responsibility is blurred, while the warranty comes from whoever actually did the work.

Entrance vs. apartment intercom: what’s different for repairs

An entrance intercom serves the whole riser and shared components, while an apartment intercom serves a single subscriber panel and its connection, so the scope of work and the set of parts to check are different. In the entrance system, the technician checks the controller, power supply, electromagnetic lock, and the communication line to the apartments, as well as the call address settings. In the apartment system, they inspect the call panel, microphone, speaker, door release button, and the cable to the floor connector. At Tech Service we service both entrance and apartment intercoms, so the technician knows where to look for the cause on the first visit and doesn’t replace working parts at random. In practice, it’s usually the shared part — power and line — that fails most often, so it makes sense to start diagnostics there. When something breaks in the entrance, check the shared unit and line first, not the apartment unit — that’s the fastest way to find the real cause.

Intercom repair key points

A quick rundown of what to keep in mind when your intercom stops working — from the first suspicion to choosing a technician and discussing who's responsible for what.

  • The symptom points to the component: door won't open — check the lock and controller; no call — check the panel and line; beeping — check the unit's power supply.
  • Diagnostics come first: without them, a 'phone diagnosis' and any quoted price are just guesses.
  • Most breakdowns are fixed on-site: only devices that need board-level repair are taken to the service center.
  • A warranty on labor and parts plus clear pricing after diagnostics: the two main criteria when choosing a technician.
  • The building intercom and your apartment are the responsibility of different parties: clarify this before calling someone out so you don't pay for something that's not your responsibility.

11brands

Which intercom brands we repair in Almaty

We repair audio and video intercoms from popular brands. Choose a brand to learn about common issues.

We also repairWe also repairTECH SERVICE09

Besides intercom repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before intercom repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp