experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, final price after inspection.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and the most common cause of each. The technician will pinpoint the exact fault during free diagnostics.
cord, button, or circuit board
from2 500 ₸
filter, hose, or turbine
from1 500 ₸
clogged filter or motor
from1 500 ₸
bearing or air duct
from3 000 ₸
retraction mechanism
from2 500 ₸
battery wear
from9 500 ₸
worn brushes or winding
from2 500 ₸
burnt component or trace
from7 000 ₸
The table shows how much vacuum cleaner repair costs in Almaty for Artel models: a starting labor price without parts and the turnaround time. The technician confirms the total with you before any work begins.
1–3 business daystime
from 8 000 ₸cost

BeforeAfter5 steps

Five steps from your call to checking the result.
Describe the symptom and your vacuum cleaner model so the technician brings the right tools.
The technician arrives anywhere in the city within an hour of your request.
Clear some space for the work and make sure there's a power outlet available to test the vacuum cleaner.
Once you approve, the technician performs the work and replaces parts.
After the repair, you check suction and noise together with the technician.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the model and symptom when you request a visit so the technician brings the right tools. Diagnostics are free, with a 1-year warranty on labor and parts. Ask the technician about payment.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Светлана Д.Order No. ZK-2025/235 · 20 August 2025
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Не люблю сервисы, но этот запомнил. Проблема — шумит. Рустем Т возился с этим дольше, чем планировал, но довёл до конца. Заявку приняли по телефону, перезвонили через десять минут. Запчасть была в наличии, доплачивать не пришлось. Починили и дали гарантию на месяц.
Томирис Ж.Order No. ZK-8598 · 22 May 2025
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Отдал мастеру: пылесос. Основная жалоба — шумит. Из деталей — двигатель. Нагрев в норме, посторонних звуков нет!!
Даулет С.Order No. ZK-2025/381 · 23 April 2025
oursСмотрел, у кого есть запчасти на такую модель. Заодно поменяли: шланг. Ребёнок уже проверил на прочность, держиться
Алексей Г.Order No. 25570 · 13 November 2024
oursОсновная жалоба — не включается. Дамир М приехал в тот же день, хотя был конец смены. Нагрев в норме, посторонних звуков нет.
Талгат С.Order No. ZK-9595 · 22 December 2023
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Повод для визита: шумит. Проверил дома — всё на месте, ничего не забыли!!
Томирис Ж.Order No. 603271 · 10 November 2023
oursЖалоба простая: шумит. Дамир М честно сказал, что менять, а что ещё походит. Проверили на всех режимах, всё чётко.
Ринат Х.Order No. 229820 · 10 February 2022
oursПробовал найти мастера в своём районе, но все были заняты. Нужен был ремонт пылесоса — обратился сюда. Повод для визита: шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Гудит ровно, не греется, всё как надо.
Максат О.Order No. 984085 · 10 August 2021
oursДо этого обращался в другой сервис, там только развели руками. Записался на диагностику пылесоса. Проблема — шумит. Ни копейки сверху, как и обещали. Вернули в тот же день, всё функционирует
Айгуль К.Order No. ZK-2021/900 · 31 March 2021
oursЦена имела значение, но и гарантия тоже. После выходных обнаружил: не всасывает. Дамир М всё объяснил и не пытался впарить лишнее. Деталь на замену — двигатель. По цене не скажу, что дёшево, но справедливо. Мастер сам перезвонил, когда появилась запчасть. Сделали аккуратно, следов разборки не видно)
Акбота Т.Order No. 16516 · 20 April 2016
oursҮйдегілер «лақтыр» деді, мен шешім қабылдамай тұрып көрсетуге апардым. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, modern Artel robots are designed for constant connection to the dock: the controller stops charging once the battery is full. But if the battery is already worn out, it's better not to leave the robot on the dock for days on end — it speeds up discharge. It depends on the model.
Most often people come in with motor, brushes, cord rewind mechanism, and the battery of upright models. It depends on the model, but these components can be repaired or replaced separately.
Lifespan depends on the model and care: with regular cleaning, the device works for several years. The battery wears out fastest, and replacing it brings the robot back to life.
At Tech Service, a technician comes to your home or accepts the robot at the service center. Diagnostics are free, and there's a one-year warranty on labor and parts.
Yes, the turbo brush is often restored: the shaft is cleaned of hair and threads, the belt or bearing is replaced. It depends on the model, and if the housing and motor are intact, the unit keeps working.
Yes, the control board is repaired as a standalone unit: traces and components are checked, and the module is replaced if necessary. It depends on the model, and diagnostics will show what's cheaper.
Tech Service repairs Artel vacuum cleaners in Almaty as a direct provider with its own technicians: we come to your home or take the equipment to our service center, diagnostics are free, and there's a 1-year warranty on labor and parts. A technician arrives within 60 minutes anywhere in the city, and our technicians have 4 to 20 years of experience.
Artel symptoms almost always have a specific cause — a clog, worn brush, motor overheating, or a control board failure. Let's break down what leads to what and how to tell a simple issue from a serious breakdown.
Most often the appliance won't turn on due to a faulty power button, a broken cord, or motor protection kicking in after overheating — during diagnostics we check the power circuit step by step. First we test the power cord and plug: a break at the base or where it exits the housing is visible by the bent insulation. Then we check the power button — on corded models it's mechanical and the contact burns out over time, on cordless ones we also test the battery. We test the control board separately: if power reaches it but the motor is silent, the cause is in the electronics or the motor itself. If the device doesn't come back to life after cooling down, it's not the protection but the motor or board — further attempts to turn it on under load only finish off the unit. The technician quotes the repair cost for Artel vacuum cleaners after free diagnostics, once the cause is clear.
Weak suction on an Artel with an empty bag is usually caused by a clog in the hose or tube, a clogged filter, or a leak at a joint — we locate the area by the drop in airflow. We check the hose against the light: a clump of dust or a small object in the corrugation cuts airflow more than it seems, and in the tube a clog often hides behind a bend. We inspect filters and the dust container against the light — a clogged fabric lets less air through even if it looks clean. We also check the joints: a cracked seal or a detached pipe releases pressure, and the motor runs idle. A washable filter must be completely dry before use, otherwise moisture draws dust into the motor and suction drops even more. If airflow isn't restored after cleaning all parts, we look deeper — at the impeller or the motor itself.
A burning smell and sharp noise from an Artel vacuum cleaner signal motor overheating or bearing wear, and we don't recommend using the appliance until it's fixed. A metallic hum and increasing vibration point to bearing wear: the shaft starts to wobble and the impeller hits the housing. A steady hum turning into a whistle indicates motor winding overheating — usually after long use with a clogged filter. Housing vibration with a working motor often comes from an unbalanced impeller or a loose mount. The smell from burnt winding doesn't go away on its own — if you delay repair, combustion products settle on the board and add electronics to the motor replacement. So at the first smell of burning, it's best to turn off the appliance and not start it until inspected.
Artel indicators give a signal before the appliance finally stops — let's break down what blinking and codes mean and when it's solved by adjustment versus a technician's intervention.
| Signal | Probable cause | What we do |
|---|---|---|
| Indicator blinks, motor won't start | board or button failure | check the power circuit |
| Filter light on | clogged filter or container | clean the filtration unit |
| Blinking during operation | motor overheating | check the motor and airflow |
| Charge indicator stays on | battery failure on upright models | test the battery |
| Signal after charging | power supply issue | diagnose the charging unit |
If the Artel indicator goes off after cleaning the filter and restarting, no intervention is needed — but repeated blinking with a working filter we consider a control board fault. During free diagnostics, the technician checks the power circuit, button contacts, and the condition of the filtration unit: some signals are cleared by cleaning or a proper restart, while others point to a control board, battery, or charging unit failure. Resetting the error without fixing the cause brings the signal back after a few cycles, so we first find the faulty unit and only then clear the code. The same signal on different Artel lines can mean different things, so we always cross-check the interpretation with the model, not just the indicator. Then the technician agrees on the scope of work and gives the price after diagnostics.
Upright, corded, water-filter, and robot Artel vacuum cleaners break down differently — each category has its own weak component, and the repair approach varies.
An upright Artel that discharges quickly usually suffers from battery wear, not the spinning turbo brush — from tangled hair and a worn roller. The battery loses capacity after several hundred charge cycles: runtime drops from the usual minutes to five or seven, and the unit dies mid-clean. The brush roll stops when hair and pet fur wrap around the shaft, and the plastic blades wear down against hard floors. A separate issue is the contacts in the housing: dust and moisture cause oxidation, and the charge doesn't reach the cells even though the indicator shows full. We replace the battery in Artel upright vacuum cleaners and restore turbo brush rotation, also checking the drive belt and contact points. We test the battery under load, not by the indicator: a fully charged battery can sag right when the brush starts running.
In corded Artel vacuum cleaners, the cord doesn't rewind due to a stretched spring or a broken latch in the mechanism — this is a common fault, and we repair the rewind unit. Over time the spring loses tension, the latch cracks from yanking, and the power cord either hangs outside or jams in the drum. The motor itself may be fully functional — suction remains, and only the rewind causes inconvenience. The second most frequent unit is the motor itself: overheating and dust on the commutator cause humming, sparking, and smell, and the motor brushes wear down to graphite dust. We disassemble the drum, replace the spring and latch, check the contacts on the rings, and service the motor if worn. If you yank the cord while the rewind is jammed, the live wire breaks at the base — then a power cord replacement is added to the mechanism repair.
We also take in Artel water-filter vacuum cleaners and robots: in water-filter models, the filtration unit and pump suffer; in robots, the electronics and brushes. The pump stops supplying water if scale from hard water builds up, and the filtration unit loses seal and lets dirty water into the motor compartment. In robots, the charging base contacts, obstacle sensors, and side brushes fail — the latter wear against baseboards — and dust on the board causes navigation glitches: the unit circles in place or doesn't see the room. We service Artel water-filter vacuum cleaners, flush and replace the pump, and for robots we repair the electronics, clean the sensors, and replace the brushes. Don't leave water in the water filter between cleanings — stagnant moisture causes scale in the pump, and the unit loses performance ahead of time.
Our work follows a transparent process — free diagnostics, approval, repair, and warranty. Here's each step and exactly what the warranty covers.
Our diagnostics are free, and a technician can be at your door within 60 minutes anywhere in the city — you don't have to bring your Artel vacuum to the service center if it's easier to have a specialist come to you. Artel vacuum repair in Almaty always starts with this free at-home diagnostics. The technician inspects the body, cord, contacts, filter, and motor right on the spot and immediately identifies the cause of the failure. Most common issues with corded and upright models can be fixed on-site: replacing the cord, cleaning the air path, checking the power button. If the motor or control board needs to be taken apart, the unit is transported to the service center — the technician will let you know in advance. At your home, the specialist checks the power supply and components in your electrical system — sometimes what seems like a breakdown is actually a problem with the outlet or extension cord, and that's only visible on-site. So before calling, test the outlet with another appliance — this will speed up the diagnostics.
After diagnostics, we agree on the scope of work, carry it out, and provide a 1-year warranty on labor and parts — this covers both replaced components and the quality of the work itself. First, the technician explains what exactly has failed and what options are available; then you confirm the work, and only after that does he start. Parts are selected for your specific Artel model: brush rollers, belts, cords, buttons, contacts. Replacement and installation are bundled together, so you don't pay separately for removing and reinstalling a component. The warranty applies specifically to the repaired unit, so if you come back, the technician checks what was replaced last time and doesn't charge for it again. Keep the work description — it makes it easier to track what has already been replaced in your appliance.
The cost of Artel vacuum repair depends on the breakdown and the part needed, and the exact amount is given by the technician after free diagnostics — quoting a figure before that wouldn't be fair. Three things affect the price: the type of fault, the cost of the part itself, and whether the body or motor needs to be disassembled. The same "won't turn on" symptom on different Artel models can mean different amounts of work — from a button to the control board — so the price is calculated after disassembly, not based on the symptom. We don't give a figure over the phone: without inspection, it's easy to misdiagnose the component and mislead you. After diagnostics, you get a clear estimate and decide whether to proceed — diagnostics remain free. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. In my opinion, it's more honest to give an exact amount after disassembly than to scare you with a rough figure beforehand.
Some Artel breakdowns can be prevented with proper care, and sometimes it's cheaper and more sensible to repair the appliance than to replace it — we look at both questions from a practical angle.
Restoring is usually more cost-effective when a single component fails on an Artel — a brush, cord, battery, or winding mechanism — while the body and motor are still in good shape. Replacing the brush roller, resoldering the cord, or swapping the battery pack gets the appliance working again without the cost of a new one. The motor and control board are a different story: these components determine the lifespan of the device, and their condition decides whether further investment makes sense. And diagnostics show this accurately, not just by eye. If after checking it turns out that both the motor and the board need replacing at the same time, it's worth honestly weighing: sometimes the total cost of repairs on old equipment approaches the price of a new one, and the technician will tell you straight. In my opinion, it's smarter to invest in restoring one component on a machine with a healthy motor than to replace the whole appliance because of a wear part.
Here's the key information every Artel vacuum cleaner owner should keep in mind: from reading symptoms to maintenance that delays a service visit.
60brands
Our technicians service appliances from various brands. Choose a brand to open a page describing the work.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












