experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Free diagnostics, a technician at your door within 60 minutes anywhere in the city. 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are the symptoms our technicians see most often on service calls. The exact cause is confirmed after free diagnostics.
dead battery or faulty control board
from9 500 ₸
clogged filter or blockage in the cyclone
from1 500 ₸
worn battery cells or charging fault
from9 500 ₸
motor overheating or low battery
from7 000 ₸
hair wrapped around it or drive failure
from2 500 ₸
foreign object in the turbine
from3 000 ₸
overheat protection triggered by a blockage
from3 000 ₸
poor contact in the connector
from7 000 ₸
The table shows Dyson vacuum repair costs: a "from" labor price without parts and the timeframe. The technician confirms the total before any work begins.
1–2 hourstime
from 3 000 ₸cost

BeforeAfter5 steps

Five steps from your call to checking the result on site.
You describe the symptom, and the technician confirms the model and the nature of the fault.
The technician brings the right nozzles and fasteners to disassemble the housing for your specific model.
The technician records the model, symptom, and accessories in the request, then agrees on the scope of work.
What the technician leaves behind after the repair: checked components, the replaced part, and operating tips
How the visit time is agreed and what to do if your plans change
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the symptom — a technician will arrive within 60 minutes anywhere in the city and run free diagnostics. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Ержан А.Order No. ZK-5205 · 17 April 2025
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Больше всего напрягало: не включается. Tech-service оказался ближе всех, за это и выбрал. Крутит ровно, без рывков.
Андрей П.Order No. TS-4997 · 28 December 2023
oursХотел сначала вызвать мастера на дом, потом передумал. Запчасть была в наличии, доплачивать не пришлось. Уже полгода — ни одного сбоя.
Сауле Н.Order No. ZK-2022/567 · 17 August 2022
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Вечером включил — и всё стало ясно: не включаеться. Позвонили заранее, предупредили, что задержится на полчаса. Вышло дешевле нового, что логично. Заодно поменяли: шланг. Не пожалел ни разу. Сделали и забыл про проблему
Бакыт Ж.Order No. 2022-8882 · 15 August 2022
oursТехниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Күтуге уақытым жоқ еді, сол күні алып кеттім. Бәрі жақсы, шағымаймын.
Фарида К.Order No. ZK-2021/650 · 17 December 2021
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Привёз на диагностику: пылесос. Проблема — шумит. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. По деньгам вышло адекватно, в другом месте просили больше. Мастер показал, что меняет: шланг. Мастер посмотрел, сказал, что возьмётся, и взялся. Если что — обращусь снова. Сделали и забыл про проблему.
Индира П.Order No. TS-7580 · 17 January 2021
oursИскал мастерскую поближе к дому, чтобы не мотатся с техникой через полгорода. Включил, проверил, работает
Индира П.Order No. TS-2004-259 · 19 August 2020
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Руки чесались починить самому, хорошо, что не полез. С чем пришёл: шумит. Сравнивал с двумя другими — здесь вышло ровнее всех. Разобрали, посмотрели: шланг. Выбирал между парой сервисов, Tech-service взял адекватностью. Шум пропал, работает мягко.
Ирина Т.Order No. 31352 · 20 July 2019
oursПробовал найти мастера в своём районе, но все были заняты. Проблема — шумит. Внешне как новый, если не считать мелкой царапины.
Максим Ю.Order No. TS-9450 · 31 August 2017
oursТехника на гарантии уже не была, так что выбор был свободный. Ещё утром всё работало, а к вечеру — не всасывает. В списке работ — шланг. Заплатил 12 000, и не жалею. Объяснили по телефону, что можно не везти, но я всё равно привёз. Крутит ровно, без рывков.
Гаухар Н.Order No. ZK-3383 · 23 April 2017
oursДамир М не стал навязывать дорогую запчасть, поставил нормальную. Заявку приняли по телефону, перезвонили через десять минут. Проверили при мне, показали, что всё держит.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIt depends on the model and the condition of the unit: sometimes the motor can be restored, but if it's worn out or the bearings are damaged, it's usually replaced. The technician disassembles the housing, checks the rotor and windings, and suggests an option after free diagnostics.
If the vacuum turns on from the mains or starts briefly but doesn't reach full speed and hums, the problem is more often the motor; if the charge drains quickly, the battery is suspected. The technician makes a precise conclusion after checking both components.
Diagnostics for a Dyson vacuum is free: the technician comes to your home within the city, inspects the unit, and identifies the cause. They provide the cost of work after the inspection.
The technician fixes some issues right at your home, while complex cases involving motor or board disassembly are taken to the service center. They will tell you what's needed after the inspection.
First check the power adapter and the contacts on the dock, then try charging the battery separately. If the indicator doesn't respond, the cause may be the battery or the board — a technician's diagnostics is needed.
The cause is often incorrect assembly, worn bearings, or impeller imbalance. The technician will check the unit and fix the issue so the appliance runs quietly.
Tech Service repairs Dyson cordless stick vacuums in Almaty: our technician arrives at your home within 60 minutes or accepts the device at the service center. Diagnostics are free, the technician gives you the price after diagnostics, and there's a 1-year warranty on labor and parts. We deal with error codes, suction loss, battery, and motor issues.
A Dyson rarely dies without warning. A red light, a brief start, and a refusal to charge are diagnostic signs that help a technician narrow down the fault before even opening the unit.
A red light on a Dyson indicates a fault in the power circuit or motor, not a low battery—when the battery is low, the light behaves differently. On the V8 and V11, it comes on when the control board detects a current deviation through the digital motor or a voltage drop in the battery pack. A steady light is more often linked to the battery, while intermittent flashing points to board protection, and flashing with a simultaneous click indicates the motor trying to start and immediately resetting. These models don't display an error code, so the technician reads the signal by the pattern and duration of the flashes. The flashing pattern (steady, intermittent, or with a click) narrows the search: intermittent usually points to board protection, steady to a battery issue, and the technician starts by checking that signal. If you need Dyson vacuum repair in Almaty, the technician will determine the cause from the signal pattern and the results of free diagnostics.
We check three components in sequence—the battery under load, the power circuit, and the control board—because a brief start followed by shutdown almost always means protection has kicked in. The battery may show normal voltage at rest but drop under motor current, so the board sees a dip and shuts the unit down. We check the power circuit for oxidation and frayed wires, and the board for signs of overheating and damaged traces. The digital motor in this setup is checked last, although a jammed motor can produce a similar symptom. If the housing is noticeably warm after shutdown and the bin and filter are clean, the cause is more often motor overheating or a battery that can't hold current—these are different repairs, and it's best not to confuse them.
Our diagnostics start by measuring the voltage at the charger output and at the battery contacts—this shows whether the adapter, the battery itself, or the board that isn't accepting charge is to blame. We test the adapter under load, not at idle: without current it may output correct values and still fail to charge. Then we inspect the contacts on the dock and in the housing connector—burn marks and oxidation produce the same symptom as a dead battery. The control board is ruled out last, by the lack of response to a known-good charger. A common cause of "won't charge" is oxidized or worn dock contacts rather than a failed battery; cleaning the contacts sometimes restores charging without replacing components, so the technician checks them before recommending replacement.
Loss of suction in a Dyson is almost always due to a clog in the airflow path, a dirty filter membrane, or motor wear—and the technician distinguishes these causes by how the device behaves.
If the bin is empty and the filter membrane is clean, weak airflow points to a clog in the cyclone, wand, or attachment, as well as a drop in motor speed—the entire path from brush to exhaust needs checking. Dust compacts in the connector, in the bend of the wand, and at the base of the motorized brush, while the channel may look clear. Another cause is a drop in digital motor speed: suction weakens even though dust isn't accumulating anywhere, and the sound changes to a steady hum. Less often, the pre-motor membrane is to blame if it was installed wet—residual water blocks the air channel. A clog in the connector or wand bend is often invisible from the outside but sharply reduces suction; we blow out the path section by section rather than just replacing the consumable, otherwise the problem returns within a week.
| What we check | Sign of a problem | What the technician does |
|---|---|---|
| Filter and cyclone | dust on the filter, weak airflow | cleans or replaces the filter |
| Tube and connectors | clog in the bend | blows air through the duct section by section |
| Motorized brush | roller doesn't spin | cleans or repairs the brush |
| Digital motor | humming without suction | checks RPM and power supply |
Our service includes cleaning the cyclone and membranes, and it's a separate service, not just restoration — after it, suction often comes back without replacing parts. The specialist disassembles the cyclone, washes the bin and rinses the pre-motor and HEPA elements, then blows air through the duct section by section. We do free diagnostics before the service: we check airflow and motor RPM so we don't clean a unit that already needs replacement. You can't wash a consumable "by eye" and put it back damp: leftover water reduces suction and causes odor, so the technician dries and checks it before reassembly instead of just rinsing it. We provide a 1-year warranty on labor and parts, and a specialist arrives within 60 minutes in the city.
Most often, a Dyson owner is afraid to hear that everything needs to be replaced at once. Here's what components we check, what can actually be restored, and when replacement is justified.
We test the battery under load, not just by a single charge indicator, and the result shows whether the battery is losing capacity or there's a fault in the charging circuit. Diagnostics take two steps: first we measure voltage on the cells under load, then we test the control board and charging contacts for voltage drops and oxidation. In a worn battery, capacity drops unevenly — some cells hold charge, others don't, and the device shuts off abruptly under load. If the drop is in the power circuit, the battery isn't to blame — the electronics are. Fast discharge after a full charge usually indicates worn cells rather than a faulty board; but if the vacuum drains even when turned off, you should look for a leak in the electronics, not the battery.
We first check the digital motor at RPM and by current draw, and only if the unit can't be restored do we discuss replacement — not the other way around. The technician takes readings at idle and under load, listens to the bearing, and sees how the unit holds RPM when voltage drops. This data shows whether the commutator brushes are worn, if there's shaft play, and whether the impeller is sticking. The motor and battery give a similar symptom of "lost power," but they differ in behavior: with a weak battery, the device loses suction gradually, while a problem with the winding causes a sharp drop along with a change in sound. That's why we don't replace the power unit based on a single sign of "it got weaker" — we first rule out the battery and duct so we don't replace a working unit.
| Component | What we check | Approach |
|---|---|---|
| Battery | capacity under load | restore or replace |
| Digital motor | RPM and current draw | repair or replace |
| Control board | power-on circuit and modes | diagnostics and repair |
| Motorized brush | roller rotation | clean or repair |
The format depends on the breakdown: some faults we fix on-site, others require the service center. Here's what can be done at home and how a visit works.
At your home, we handle duct cleaning, filter replacement, power diagnostics, and attachment restoration, while complex motor and board work is usually done at the service center. The visiting technician brings tools to check contacts, the power button, and the charging unit—these operations are enough to rule out a clog, a dead battery, or a faulty attachment. The digital motor and control board are checked differently: they require disassembling the housing, accessing the winding, and bench testing under load. So if a motor issue is suspected, the visiting technician arranges intake, and the device goes to the service center. The format is chosen based on the breakdown, not the client's preference: when testing requires disassembling the housing and bench diagnostics, it's better to take the device to the service center than to try to do it in the kitchen.
We arrive within 60 minutes anywhere in the city—the specialist comes to your home or picks up the device for the service center if the breakdown requires in-house diagnostics. This timeframe applies throughout Almaty, including residential areas and new developments on the outskirts, so you don't have to wait until the next day. The visiting technician brings tools to check power, test contacts, and inspect the airflow path. The speed of arrival doesn't affect diagnostic quality: the check is done on-site, not just by eye, so the verdict on the breakdown is made on the first visit. When restoration is possible at home, it's done immediately; when the service center is needed, they arrange device intake and further steps. The technician doesn't limit the visit to just an inspection: they immediately test the unit under load, so you don't have to come back a second time for the same verdict.
We first disassemble the Dyson motorized brush and check the roller and drive, and only discuss replacing the attachment if there's irreparable wear. A common cause of "the brush won't spin" is tangled hair and a clogged roller, not a drive failure; cleaning the roller restores rotation without replacement, so disassembly starts before a verdict on replacement. During inspection, they check the condition of the bristles, the roller bearing, and the contact in the attachment connector—an oxidized contact gives the same symptom as a dead drive. If the bristles are worn or the roller housing is damaged, cleaning won't restore cleaning performance. In our practice, most attachment requests are resolved by disassembly and cleaning, not by buying a new brush—this is worth considering before looking for a replacement.
The service terms address the main fear of a Dyson owner—"will they push extra work and will it break again?" We explain how free diagnostics work, the cost approval process, and warranty obligations after the work.
Diagnostics are free: the specialist checks power, airflow, and components, identifies the cause, and agrees on the scope of work before any intervention. First, they test the charging circuit and battery controller, then remove the container and cyclone to assess duct clogging, and check the digital motor under load by sound and RPM. Attachments are tested separately—the shaft and coupling often give a false picture of "the motor is dead." Based on the disassembly and fault detection, the client receives a list of what needs attention and what can be left as is. Free diagnostics doesn't mean a "quick look": the unit is tested under load, not just visually inspected, so the verdict on the breakdown is accurate and doesn't change after disassembly.
The technician gives you the price after a free diagnostic — once the cause and scope of work are clear, not “at the door.” The Dyson owner learns which components will be replaced, which will be cleaned or resoldered, and how much each option will cost, before the machine even goes on the workbench. We agree on the work with the client based on the actual faults found: if a replacement is recommended, we explain why repair isn't practical and leave the decision to the owner. This approach protects the client from surprises: if disassembly reveals a different cause, the cost is discussed again rather than silently added to the original estimate. We accept Kaspi QR, Kaspi Red, card, cash or transfer, and the client chooses. The technician states the amount out loud before work begins, so there's no misunderstanding at the final stage.
We provide a 1-year warranty on labor and a 1-year warranty on parts — these are two separate commitments, and both apply after service. Based on our technicians' experience with 4–20 years on the job, most returns are due to either a defective component or an installation error, and separate warranties let us distinguish these cases without argument. When replacing the digital motor, battery, or board, the Dyson owner gets protection on both fronts: the part covers its service life, and the technician covers correct installation and setup. Separate warranties matter when replacing components: if the problem returns due to the part, the parts warranty applies; if due to installation, the labor warranty applies — and the client doesn't have to prove which case it is. Dyson vacuum repair in Almaty is covered by the same warranty — it doesn't matter whether we fixed it at your home or at the service center.
Dyson breakdowns come down to a few recurring scenarios: indicator signals, loss of suction, battery behavior, and the digital motor. Below is a quick summary to help you understand what the owner is dealing with.
60brands
Our technicians service Dyson vacuums and other appliances from these brands — each has its own page with the details.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












