Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a commercial refrigerator

Commercial Refrigerator Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • Arrival within 60 minutes
  • Free diagnostics

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Condenser cleaningfrom5 500 ₸
  • Filter drier replacementfrom6 000 ₸
  • Drain cleaningfrom6 000 ₸
  • Start relay replacementfrom7 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common commercial refrigerator faults in Almaty

Below are common symptoms, likely causes, and inspection time. The technician will determine the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much commercial refrigerator repair costs in Almaty

The cost depends on the type of fault and the equipment model. Below are the main services and prices.

Condenser cleaningexact price — after the free diagnostics

1–2 hours

from5 500 ₸

Filter drier replacementparts not included

1–2 hours

from6 000 ₸

Drain cleaningexact price — after the free diagnostics

1–2 hours

from6 000 ₸

Start relay replacementparts not included

1–2 hours

from7 500 ₸

Door seal replacementparts not included

1–2 hours

from8 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after commercial refrigerator repair in Almaty

Door seal wear

1 visittime

from 8,000 ₸cost

Problem
The industrial refrigerator door stopped closing tightly: the seal along the edge dried out, cracked, and peeled off in places; warm air was entering the chamber through the gaps.
What we did
The technician removed the old seal, cleaned and degreased the door's seating groove, installed a new seal around the entire perimeter, and adjusted the door's closing pressure.
Result
The door closes tightly along the entire contour, with no gaps. The technician checked the fit and the refrigerator's operation. Warranty 1 year.
I want the same
Industrial refrigerator: door gasket wear — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How commercial refrigerator repair works at your site in Almaty

Five steps from request to check. Free diagnostics, arrival within 60 minutes.

  1. Request1 day

    Leave a request and a technician will arrive within 60 minutes anywhere in the city.

  2. Visit schedulingbefore arrival

    We'll agree on a convenient visit window and the exact site address.

  3. Approvalafter inspection

    You approve the estimate and timeline; only then does repair begin.

  4. Repairafter estimate

    The technician performs the work and checks the equipment in operation.

  5. Startup checkupon completion

    The technician demonstrates startup and records the result.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book commercial refrigerator repair in Almaty

When requesting, tell us the equipment type, brand, and symptoms so the technician arrives prepared. 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of commercial refrigerator repair in Almaty

Гульнара Б.Order No. ZK-1383 · 30 August 2026

ours

Бірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Ұсынамын, текке ақша алмайды.

Repair: commercial refrigerator repair in

Артём К.Order No. TS-5106 · 18 June 2026

ours

Никита М всё объяснил и не пытался впарить лишнее. Мастер сразу сказал, что к чему, без размытых формулировок. С тех пор ни разу не подвёл.

Repair: commercial refrigerator repair in

Николай Ч.Order No. 2026-8160 · 10 April 2026

ours

Позвонил в три места, здесь единственные назвали цену сразу. С чем пришёл: не держит холод. Проверил дома — всё на месте, ничего не забыли.

Repair: commercial refrigerator repair in

Диана М.Order No. 918250 · 14 January 2026

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Такое чувство, что техника сговорилась ломаться вся разом. С чем пришёл: утечка фреона. Никита М взялся за то, от чего другие отказались. Починили и дали гарантию на месяц.

Repair: commercial refrigerator repair in

Сабина Г.Order No. TS-2989 · 31 October 2025

ours

Смотрел, у кого есть запчасти на такую модель. После выходных обнаружил: не держит холод. Сравнивал с двумя другими — здесь вышло ровнее всех. Деталь на замену — вентилятор. Мастер сам перезвонил, когда появилась запчасть. С чистой совестью советую. Внешне как новый, если не считать мелкой царапины.

Repair: commercial refrigerator repair in

Ляззат К.Order No. TS-6723 · 17 October 2025

ours

Бірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Жөндеуге кепілдік бар, сол сенімді.

Repair: commercial refrigerator repair in

Елена К.Order No. TS-4858 · 3 July 2025

ours

Нужен был счёт и чек, у нас техника на балансе организации. Повод для визита: не держит холод. Гудит ровно, не грееться, всё как надо

Repair: commercial refrigerator repair in

Гульмира С.Order No. 36378 · 2 July 2025

ours

Друг посоветовал, у него похожая история была. Мастер показал, что меняет: испаритель. Уже полгода — ни одного сбоя.

Repair: commercial refrigerator repair in

Ильяс Н.Order No. TS-2403-920 · 17 August 2024

ours

Друг посоветовал, у него похожая история была. Была паника, если честно. Основная жалоба — не держит холод. Никита М объяснил причину так, что понял даже я. Ни копейки сверху, как и обещали. Нужна была замена: компрессор. Объяснили по телефону, что можно не везти, но я всё равно привёз. Техсервис в Алматы, если что, вот их адрес — не пожалел. Рекомендую. Второй месяц — полёт нормальный

Repair: commercial refrigerator repair in

Евгений М.Order No. 2024-7965 · 3 May 2024

ours

Дильмурат С объяснил причину так, что понял даже я. Работает как раньше, придирок нет!!

Repair: commercial refrigerator repair in
Questions and answersQuestionsTECH SERVICE07

Questions about commercial refrigerator repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How can you tell if a refrigerator compressor has failed?

Signs: the compressor won't start or runs without cooling, you hear clicking, and the chamber doesn't reach temperature. A technician will give an exact diagnosis after free on-site diagnostics.

How is commercial refrigerator repair different from residential?

Commercial equipment is built for continuous load and large volumes, so it has different compressor power, defrost patterns, and electronics. A technician needs experience with such units and access to a three-phase power supply.

Can a commercial refrigerator be repaired without moving it from the site?

Yes, commercial refrigerator repairs are usually done right on site, and the technician comes with their own tools. Equipment is taken to the service center only when the fault can't be fixed on site.

How can you tell if a commercial refrigerator is leaking refrigerant?

Signs of a leak are weak cooling while the compressor is running, warm pipes, and a gradual rise in chamber temperature. Sometimes an oily film is visible on the connections, and diagnostics will show the exact cause.

Why does the refrigerator chamber get covered in ice inside?

Ice usually appears due to a defrost failure, a faulty heating element, sensor, or clogged drain. It depends on the model: sometimes the cause is a door that isn't closed tightly or damaged door seal.

What should I do if a commercial refrigerator shows an error code?

Write down the code and check the manual for the model — it explains what it means. Don't reset the error repeatedly and call a technician: they will read the controller parameters and find the cause.

Repair guideArticleTECH SERVICE08

Industrial Refrigerator Repair in Almaty by Tech Service

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs industrial refrigerators in Almaty as a direct contractor: our technician arrives at your site within 60 minutes anywhere in the city or takes the equipment to our service center. Diagnostics are free, you get a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience.

How to Tell When Industrial Refrigerator Repair Is Urgent

An industrial refrigerator breakdown rarely starts with a complete failure—more often it's a temperature deviation, frost buildup, or an unusual noise. Let's look at which signals point to a problem and what they mean.

The Industrial Refrigerator Won't Hold Temperature

If the chamber or display case consistently goes outside its operating range, the cause is usually a refrigerant leak, a dirty condenser, or a faulty thermostat. Refrigerant circulates between the condenser and evaporator, and a loss of circuit integrity reduces cooling capacity gradually, not all at once. A heat exchanger clogged with dust and lint stops releasing heat, so the motor runs longer and gets hotter. The thermostat and temperature sensors give incorrect readings, and the unit either undercools or cycles too frequently. Industrial refrigerator repair in Almaty starts with free diagnostics: the technician identifies exactly what's throwing off the temperature. Check whether the condenser is clogged with dust and whether the door seals tightly—these two causes account for up to half of all temperature-related calls and can be fixed without replacing components. For display cases in the sales area, there's another factor: warm air flowing in from the entrance.

It Hums but Doesn't Cool, and Other Sound Signals

A compressor that runs nonstop without producing cold usually points to a refrigerant leak or motor wear, not an electronics failure. The unit compresses refrigerant in the cooling circuit, and when gas is low, it's just running on empty: the motor hums but the evaporator stays warm. The pressure switch may fail to shut off the unit, so it runs for days without pausing. A worn motor adds a metallic knock or a thick, jerky hum to the noise, while a faulty fan produces whistling and rustling. If the compressor hums continuously, don't yank the power cord—let the technician hear the sound; it speeds up diagnostics and helps distinguish a leak from mechanical wear. A whistle when the door is open often comes from the fan bushings, not the circuit.

Frost, Leaks, and Error Codes on the Display

  • Frost buildup in the chamber: the evaporator ices over when the defrost heaters or timer fail—cooling is present, but airflow is blocked.
  • Puddle under the unit: a circuit leak or clogged drain; condensate doesn't drain and pools on the floor.
  • Loose door gaskets: warm air from the sales floor gets inside, and frost forms around the edges of the chamber.
  • Error code on the display: electronic control boards detect a specific sensor failure and show it on the screen.
  • Won't turn on: check the power supply and circuit breaker—if they're fine, the signal points to the board or start relay.
  • Take a photo of the error code before the technician arrives: it makes it easier to match the fault to a specific sensor or board.

How Industrial Refrigerator Repair Works On-Site

Industrial refrigeration equipment is rarely taken to a workshop—in most cases, the technician works right in the store, restaurant, or warehouse. Let's look at how an on-site visit works, what's included in free diagnostics, and when you still can't avoid the service center.

The Technician Comes to You

Our technician arrives at your location within 60 minutes anywhere in the city and in most cases fixes the equipment on site without taking it away. We work as a direct contractor — our own employee comes to you, not a middleman with a subcontractor, so they identify the cause of the breakdown themselves and start work right away. Our technicians have 4 to 20 years of experience; over that time they have worked on cold rooms in warehouses, display cases in sales areas, and chest freezers in food production kitchens. Before the visit, we ask for the model of the unit, the nature of the fault, and the type of refrigerant, so the technician brings the right tools, gauges, and spare relays without wasting time on trips back for parts. We also ask how the equipment is connected to the power supply and whether there is a free outlet nearby for measuring instruments. Before we arrive, please clear access to the unit — the rear grille and compressor area should be open, otherwise diagnostics will take longer and some checks will have to be postponed.

What free diagnostics includes

  • Temperature mode: we measure the actual temperature in the chamber and compare it with the controller setpoint stored in the settings.
  • Refrigerant circuit: we inspect the tubes and connections, looking for signs of refrigerant leaks, oil stains, and scuff marks on the line.
  • Compressor: we check startup, current draw, and pressure switch operation, and listen for unusual noises during startup.
  • Electronics: we test control boards, temperature sensors, and wiring for breaks, and compare readings with actual measurements.
  • Door seals: we assess fit, wear, and icing around the opening perimeter, and check how tightly the door closes.
  • Cost of work: the technician gives it after diagnostics — by then you already understand which component is suspect and what repair options are available.

On site or in the workshop

SituationWhere we repairWhat we check
Refrigerant leak, dirty condenserOn siteCircuit, condenser, recharge
Compressor wearOn siteCompressor, pressure switch
Control board failureIn the workshopElectronics, sensors
Chamber icingOn siteEvaporator, defrost heaters

What types of equipment does commercial refrigerator repair cover

The approach depends on the type of equipment: a cold room, display case, cabinet, and chest freezer are built differently. Here is how working with each type differs.

Cold and freezer rooms in warehouses and production facilities

In cold rooms, the compressor, defrost heaters, and seals most often fail, and icing on the walls is the first sign of a defrost fault. Commercial cold rooms in warehouses handle large volumes of product, so the technician first checks the refrigerant circuit and defrost cycle, and only then the electronics. Freezer rooms with an operating temperature below minus eighteen degrees put continuous load on the unit, and the slightest refrigerant leak shows up here first — at the door edges, then across the entire evaporator surface. We service such rooms throughout the city: technician arrival within 60 minutes, free diagnostics, 1-year warranty on labor and parts. In low-temperature rooms, icing builds up faster, so it is worth scheduling a preventive inspection before ice appears on the products.

Display cases, cabinets, and chest freezers in stores and cafes

Display cases and commercial refrigerators have a weak spot: door gaskets and circulation fans, which cause the case to stop holding cold. Refrigerated display cases in stores and cafes are open on the customer side, so warm air constantly enters, and the circulation fan blows it throughout the volume—when the impeller wears out, airflow drops and the shelf temperature rises. Cabinets and chest freezers are simpler: their thermostat, start relay, and the same gasket around the lid perimeter are more likely to fail. We visit the site, check the fan draft and door seal tightness, not just the sensor readings. If the display case is near an entrance or in a warm air stream, the load on the power unit increases—sometimes relocating it solves the problem without calling a technician.

How commercial refrigerator maintenance differs from home units

ParameterCommercial refrigeratorHome refrigerator
Operating modeContinuous, under loadCyclic
What we checkCircuit, compressor, electronicsCompressor, thermostat
Where we repairMore often on siteAt home or in the shop

Error codes and electronics of commercial refrigerators

Modern commercial equipment reports a fault with a code on the controller display. We explain what typical codes mean, which components wear out first, and when electronics intervention is required.

What error codes on the display mean

  • Temperature sensor: the controller detects an open circuit or short in the circuit—the element itself, the connector, and the wiring to the board are checked.
  • Defrost: a signal that the heating element or timer did not complete the cycle, and the evaporator is covered with ice.
  • Pressure: the relay tripped at an emergency value—the cause may be refrigerant leak or a clogged filter drier.
  • Compressor: protection shut off the unit due to overheating, voltage drop, or seizing—winding and start relay checks are needed.
  • Communication: the control board does not see the panel or expansion module—often the ribbon cable, oxidized connector contact, or less commonly the controller port itself is to blame.

Which parts fail most often

Most often, the compressor, temperature sensors, defrost heaters, and door gaskets need replacement—they operate under the most demanding conditions. A commercial refrigerator compressor wears out from continuous starts and increased load on the circuit, sensors lose accuracy due to moisture and temperature fluctuations, and defrost heaters burn out during frequent cycles. Door gaskets harden and stop sealing, letting warm air into the chamber. Filter driers clog with oil breakdown products and stop retaining moisture in the circuit. Part lifespan depends on operating conditions: a dusty condenser and a loose door accelerate compressor wear, so cleaning the heat exchanger and checking door seal pressure extend the unit's life more noticeably than rare unscheduled replacements. We replace the commercial refrigerator compressor with a check of the start relay and circuit pressure after reassembly.

Repair of control boards and sensors

We either restore or replace control boards and sensors, and before replacement we check the entire power circuit so the new part doesn't fail for the same reason. In our practice, a common picture is a burned triac on the board after a voltage spike in the facility's network, and installing a new module without checking the stabilizer leads to repeated failure. We check temperature sensors and pressure relays against the rated value, test ribbon cables for continuity, and inspect connectors for oxidation. If the error returns after replacing the sensor, the cause is usually in the wiring or connector, not the element itself. Therefore, we diagnose electronics across the entire circuit from sensor to controller, not just by the display code. Warranty on labor and parts is 1 year, diagnostics are free.

What to do before the technician arrives

While the technician is on the way, a few simple steps will help you save the products and keep the breakdown from getting worse. Here's what to do first and what you should never do.

First steps when a breakdown happens on site

  • Products: move perishable stock to backup cold storage or a nearby working unit so you don't lose goods.
  • Symptoms: write down exactly what's happening — not holding temperature, humming, leaking — and copy the error code from the display.
  • Power: leave the equipment plugged in, don't pull the plug or flip the breaker before the technician arrives.
  • Access: clear the way to the unit and the condenser, and move boxes and supplies away from the back grille.
  • Disassembly: don't remove panels or unscrew the casing — this makes diagnosis harder and can hide the cause of the breakdown.

Why you shouldn't repair it yourself

Doing your own repair on a commercial refrigerator is dangerous for both the equipment and the person: the pressurized circuit, refrigerant, and electrical components require tools and certification. Trying to tighten connections or replace a compressor without gauges and a vacuum pump ends with moisture getting into the circuit, and that threatens the entire refrigeration system. Even a "simple" refrigerant top-up without finding the leak brings the breakdown back in a few weeks — the cause stays in the circuit, and the refrigerant leaks out again. After the owner has intervened, finding the refrigerant leak often takes longer than the original fault: you have to check both what was broken and the traces of the DIY repair. A commercial unit holds noticeably more refrigerant in the circuit than a household fridge, so a mistake during charging costs more in both equipment and lost product. The technician fixes the leak and charges refrigerant properly — with evacuation and pressure control, not by eye.

How to choose a technician for commercial refrigerator repair

Choose a direct contractor with their own technicians, not a middleman: that way you're talking to the person responsible for the work and the warranty. Ask about the warranty on labor and on parts separately — they are different obligations, and the contractor should promise them, not an aggregator. Our technicians have 4 to 20 years of experience, diagnostics are free, and we give a 1-year warranty on labor and parts. Tech Service is a direct contractor: our technician comes to your site and handles the repair from diagnosis to final check. In my view, it's more honest when the person who names the cause of the breakdown also fixes it — then there's someone to hold accountable.

Warranty, payment, and service terms

The service terms matter as much as the repair itself: they determine what you get after the technician's visit. Here's a look at the warranty, payment procedure, and what happens when the equipment is still under the manufacturer's warranty.

1-year warranty on labor and parts

We give a 1-year warranty on labor and parts, and these are two separate obligations: one covers the quality of work, the other covers the part itself. If a compressor fails, after replacement it remains under warranty as a component, not just as a performed operation. The same goes for electronic control boards: after repair or replacement of the module, the obligations apply to the module itself and to its operation in the equipment's circuitry. Our technicians have 4 to 20 years of experience with refrigeration equipment, and that experience affects the accuracy of identifying the cause, not just the symptom. In my view, an honest warranty starts with proper diagnostics: correctly finding the cause makes a repeat visit for the same component unlikely. Keep records of the work performed — if you contact us again about the same component, it speeds up the review.

Equipment still under the manufacturer's warranty

If your equipment is still under the manufacturer's warranty, check the terms with your supplier first — having a third-party service center work on it may affect those obligations. It's not just about replacing a compressor: even opening a unit for diagnostics is sometimes treated by the supplier as grounds to reconsider their obligations. So your first step is to pull out the supply contract and clarify exactly what the warranty covers and what actions on the equipment it allows. After that, the decision is yours: wait for a warranty visit or pay for the repair yourself when downtime costs more. We provide maintenance and preventive inspections — a separate procedure that doesn't replace warranty work but helps keep your equipment running. Many breakdowns show up as a failed component, while the real cause lies in operating conditions; understanding the cause helps avoid a repeat.

On-site visit within 60 minutes and payment by Kaspi QR, Kaspi Red, card, cash or bank transfer

  • On-site visit within 60 minutes: a technician comes to your location anywhere in the city to inspect the equipment on site and identify the cause.
  • Free diagnostics: inspection and fault finding are not charged separately — you pay only for the work.
  • Payment methods: you can pay for the work in the way that suits you, including bank transfer.
  • 4 to 20 years of experience: every technician has hands-on practice with refrigeration and freezing units of various classes.
  • Price after diagnostics: the technician gives you the price once the suspected unit is identified, and you decide knowing the cause.

What to know about commercial refrigerator repair

Here are the key things to keep in mind as the owner of refrigeration equipment on site — from the first signs of a breakdown to the warranty terms for restoring your equipment.

  • Early signs: a breakdown can be spotted by temperature, ice buildup, leaks, or an error code — not only when the equipment stops working completely.
  • Where the work happens: most tasks are done on site; equipment is taken to the service center only for complex electronics repairs.
  • Equipment type: a cold room, display case, cabinet, or chest freezer determines which components are checked first.
  • Before the technician arrives: keep the food safe and note the symptoms, but don't take the unit apart yourself.
  • Warranty: terms for labor and parts are clarified before work begins, not after.

6brands

Which commercial refrigerator brands we repair in Almaty

We repair industrial refrigerators from common brands. Choose a brand to learn more.

We also repairWe also repairTECH SERVICE09

Besides commercial refrigerator repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before commercial refrigerator repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp