Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a quadcopter

Quadcopter Repair in Almaty

Free diagnostics, a technician at your door within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Maksim S.Dmitriy R.Rais M.Roman M.

Repair prices

  • Diagnostics0 ₸
  • Ribbon cable replacementfrom4 000 ₸
  • Antenna replacementfrom4 000 ₸
  • Firmware update and calibrationfrom4 500 ₸
  • Battery repair or replacementfrom6 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common quadcopter faults in Almaty

Below are typical symptoms and likely causes. The technician will pinpoint the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much quadcopter repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Ribbon cable replacementparts not included

1–3 hours

from4 000 ₸

Antenna replacementparts not included

1–3 hours

from4 000 ₸

Firmware update and calibrationexact price — after the free diagnostics

1–2 hours

from4 500 ₸

Battery repair or replacementparts not included

1–2 hours

from6 500 ₸

Beam replacementparts not included

1–3 hours

from7 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after quadcopter repair in Almaty

Blurry video and loss of focus

1–2 hourstime

from 8 500 ₸cost

Problem
After an impact, the quadcopter was recording blurry video and would not focus.
What we did
The technician disassembled the camera head, aligned and secured the shifted sensor-and-lens module, and installed new fasteners.
Result
Focus was restored and the video is sharp again — the technician checked the footage after reassembly.
I want the same
Disassembled quadcopter camera head: the sensor module with lens and internal housing fasteners are visibleBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How quadcopter repair works at your home in Almaty

From request to check — five steps, free diagnostics.

  1. Requestsame day

    Submit a request, describe the symptom and your drone model.

  2. Technician visitwithin 60 minutes

    The technician will arrive anywhere in the city within 60 minutes.

  3. On-site diagnosticsfree

    The technician finds the cause and outlines the scope of work.

  4. Repair and part replacementon site

    The technician performs soldering and part replacement on site.

  5. Warranty1 year

    1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our computer and laptop repair technicians in Almaty

The computer and laptop repair department in Almaty has 7 technicians with 6 to 15 years of experience.

  • 7 technicians in Almaty
  • 6–15 years of experience in the department
  • Article author Maksim S., 10 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 7 specializations — they are listed on the technicians' cards.

01 / 07
Maksim S., graphics card repair technicianexperience10 years

Maksim S.

Graphics card repair technician

Dmitriy R., PC and laptop diagnostics technicianexperience6 years

Dmitriy R.

PC and laptop diagnostics technician

Rais M., laptop repair engineerexperience8 years

Rais M.

Laptop repair engineer

Roman M., software installation specialistexperience10 years

Roman M.

Software installation specialist

Sergey A., PC and laptop repair technicianexperience7 years

Sergey A.

PC and laptop repair technician

Sergey M., diagnostics and virus removal specialistexperience13 years

Sergey M.

Diagnostics and virus removal specialist

Turarbek K., consultantexperience15 years

Turarbek K.

Consultant

We reply during working hours

Book quadcopter repair in Almaty

Describe the issue and your drone model — the technician will arrange a convenient time and place. Ask about payment and part availability.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of quadcopter repair in Almaty

Аяна Е.Order No. 2026-2285 · 29 October 2026

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Отдал 20 000, и это вместе с работой. Сказать, что доволен — ничего не сказать.

Repair: drone

Юлия А.Order No. 792045 · 1 December 2025

ours

Позвонил в три места, здесь единственные назвали цену сразу. Пользуюсь ежедневно, вопросов нет!!

Repair: drone

Аяна Е.Order No. 781234 · 26 November 2024

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Жалоба простая: не держит высоту. Проверили при мне, показали, что всё держит.

Repair: drone

Кристина Л.Order No. 2024-5397 · 11 May 2024

ours

Нужен был счёт и чек, у нас техника на балансе организации. Утром работало, днём сломалось, вечером я уже искал сервис. Симптом был очевидный: отказал мотор. Максим Снегирев принял, посмотрел и сразу сказал, что делать. Мастер сам перезвонил, когда появилась запчасть. Могли бы взять больше, но взяли по-божески. Под замену пошло: плата. Считаю, что нашёл своего мастера. Прошивку не тронули, всё как было.

Repair: drone

Владимир Н.Order No. ZK-2024/884 · 17 April 2024

ours

Дамир М всё объяснил и не пытался впарить лишнее. Оплатил картой, чек дали. Включил, проверил, работает.

Repair: drone

Виктор Ф.Order No. ZK-2024/577 · 27 March 2024

ours

Нужен был счёт и чек, у нас техника на балансе организации. Повод для визита: отказал мотор. Проверил дома — всё на месте, ничего не забыли

Repair: drone

Аяна Е.Order No. TS-2406-436 · 2 March 2024

ours

Техника на гарантии уже не была, так что выбор был свободный. Первое, что заметил: разбит при крушении. Проверил дома — всё на месте, ничего не забыли.

Repair: drone

Юлия А.Order No. ZK-1451 · 16 November 2023

ours

Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Заметил случайно: не держит высоту. Мастер показал, что меняет: плата. Ответили быстро, не пришлось ждать на линии. Оплатил картой, чек дали. Рекомендую. Работает как раньше, придирок нет

Repair: drone

Наталья С.Order No. TS-2301-560 · 17 October 2023

ours

Жұмыстан кейін үлгеру үшін жақын жердегі шеберхана іздедім. Бірнеше жерге қоңырау шалдым, осында ғана нақты айтты. Тексеру кезінде бәрін өзі көрсетті. Ұсақ ақауларды да тегін жөндеп берді. Мастер кешке дейін күтпей, сол күні аяқтады. Алдын ала айтқан уақыттан ерте бітірді. Бір күнде жөндеп берді, кешіктірмеді. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Бәрі жақсы, шағымаймын.

Repair: drone

Тимур А.Order No. TS-1673 · 13 July 2023

ours

Хотел сначала вызвать мастера на дом, потом передумал. Техника работала годами, а тут — не держит высоту. Дамир М взялся за то, от чего другие отказались. Разобрали, посмотрели: пропеллер. Вышло 30 000 тенге, дешевле, чем я рассчитывал. Приехал вечером, мастер ещё был на месте. Спасибо за работу. Прошивку не тронули, всё как было.

Repair: drone
Questions and answersQuestionsTECH SERVICE07

Questions about quadcopter repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a drone be repaired after falling into water?

There's a chance if the drone was turned off immediately after the fall and no attempt was made to charge or power it on. The service center disassembles the body, dries the boards, and checks the components; the outcome depends on the model and how long it was in the water.

How can you tell if the motor is broken and not the ESC when the drone won't take off?

They check one by one: a jammed or partially jammed motor turns by hand with resistance, while with a working motor the problem is more often in the ESC or wiring. An accurate conclusion comes from diagnostics and depends on the model.

The drone loses connection with the remote at a distance—is it a repair or a setting?

First, the antennas, connectors, and calibration are checked; often the issue is in the settings or a damaged antenna after a fall. If the antenna or communication module is damaged, drone repair with replacement of the unit is needed.

Can the drone gimbal be repaired separately from the camera?

Yes, the gimbal and camera are repaired as separate units: ribbon cables, stabilization motors, and mounts are replaced. The technician determines what exactly is damaged during free diagnostics, and it depends on the model.

Why is it dangerous to keep flying a drone with a cracked body?

A crack weakens the mounting of components, vibration increases the damage, and it can affect the gimbal or board. It's better not to take the drone into the air until inspected, so a minor drone repair doesn't turn into replacing components.

Are FPV drones and Autel or Xiaomi models repaired in Almaty?

Yes, besides DJI, they accept Autel, Xiaomi, and FPV drones, including custom-built ones. The set of work and parts depends on the model, so the exact scope is quoted after free diagnostics.

Repair guideArticleTECH SERVICE08

Quadcopter repair in Almaty by Tech Service with on-site technician

Maksim S., graphics card repair technician

Author: Maksim S.,Graphics card repair technician

Published
Updated

Tech Service repairs quadcopters and drones in Almaty as a direct provider: our technician comes to your home or accepts the device at the service center. Diagnostics are free, on-site visits across the city within 60 minutes, and a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.

Why your drone won't turn on, won't take off, or overheats

Owners come with a specific symptom: the device is dead, pulls to one side, or shows an error on screen. Let's go over the most common complaints, show which component is behind them, and what to do in the first few minutes.

Drone won't turn on after a fall

After a fall, a drone most often won't turn on due to a torn power cable, a cracked control board, or a shorted battery, and our technician determines which component is damaged during free diagnostics. On impact, the load travels along the chain: the battery supplies current, cables carry it to the control board, and the thin traces on it break first. A crack in the PCB may be invisible from the outside but causes a short circuit when power is applied. A shorted battery after a fall also acts dead: the indicator doesn't light up even though the cells inside are intact. The technician tests the power circuit, checks the cables and board separately to avoid replacing working parts. This quadcopter repair in Almaty starts with finding the damaged component, not with replacing everything. Don't try to turn the drone on again 'just in case' — reapplying power to a shorted board turns a local fault into a burned-out area, and the scope of work grows.

Won't take off, drifts to one side, or loses connection to the remote

Drifting to one side and refusal to take off usually point to a motor, ESC, or IMU calibration, while loss of connection to the remote points to a communication module or antennas, and we check these components one by one during diagnostics. A motor with a damaged bearing spins unevenly, and the device pulls toward it. The ESC — the speed controller — when overheated or after an impact stops holding the speed of one propeller, causing yaw and altitude drop. The IMU gets misaligned after a hard landing, and the drone loses spatial orientation. Loss of connection is caused by a cracked antenna in a leg or in the remote's body: the signal drops at a distance where it used to hold reliably. If the drone consistently pulls to one side rather than chaotically, it's more often a hardware cause (motor or ESC) than a software glitch — and calibration alone won't fix it.

Gimbal overload error, overheating, and fast discharge

A gimbal overload error and a shaking camera most often mean a damaged gimbal ribbon cable or a jammed gimbal motor, while overheating and fast discharge with a new battery point to a power board issue or the battery itself. The gimbal rests on three axes, and a ribbon cable broken in a fall cuts power to one of them: the gimbal motor stalls, and the board reports an overload. Camera shaking in level flight is the same sign. The body heating up without flight and discharging in minutes indicate a leak on the power board or a cell that has lost capacity. The technician opens the gimbal, tests the ribbon cables, and checks the battery under load separately from the device. If the gimbal overload error returns immediately on power-up after a reboot, the gimbal ribbon cable is already damaged — further flights finish off the gimbal motor, and more parts need replacing.

What to do right after a breakdown and when you need service

Some actions after a breakdown help save the drone, others make it worse. Let's separate what you can really do yourself from where you need a technician, and in which cases delay costs more than the repair.

Drone fell into water or snow

If a drone has been in water, don't turn it on or charge it until it's been fully disassembled and dried — moisture inside the body causes a short circuit, and our diagnostics show which components are affected. First, remove the battery: it's the battery that causes a short on the board in a wet environment, and electronics are more afraid of contact corrosion than of a one-time soaking. Next, the body is opened, remaining moisture is removed, and each component is checked individually — without this step, powering it on turns a minor fault into a replacement of the electronics. The chance of recovery is higher if the device fell into fresh water and was powered off immediately than if it sat turned on — so the first action after retrieval is to remove the battery, not to check whether it works.

What you can do yourself and what to leave to a technician

  • Propellers: replacement takes minutes; they're attached with screws or clips and don't require disassembling the body or special tools.
  • Arm mounts: check the screws and arm seating for play — tightening fasteners is among the safe actions.
  • Battery: charge it separately and check whether it holds a charge — this will show if the battery survived the fall.
  • Board and soldering: leave disassembling the body, soldering electronics, and replacing gimbal ribbons to a technician — this requires equipment and schematics.
  • IMU calibration: a calibration failure mimics a hardware fault, but without a test bench and software it can't be done correctly — leave it to a specialist.

Repair an old drone or buy a new one

Restoration makes sense when individual components are damaged — the gimbal, motor, ribbon, or body — while replacement is justified if the board is burned out along with the power supply and the battery is damaged. The gimbal and motor are replaced separately, the gimbal ribbon is a consumable part, and the body often cracks locally and can be restored without replacing the power section. The board along with the power supply is the most expensive combination: if both components are burned out, the scope of work approaches the price of a new device, and then replacement is more reasonable. The decision is made based on diagnostic results, not on appearance: an externally intact body often hides a cracked board, while a drone with visible arm damage may only need a ribbon replacement. That's why we agree on the scope of work with the client after free diagnostics, not based on a photo of the damage.

How quadcopter repair works with a direct contractor

We show the drone's journey from request to pickup: at your home or at the service center, with free diagnostics and approval of the scope before work begins.

Free diagnostics and work approval

Our diagnostics are free: a specialist checks the components, states the likely cause and repair cost, and work begins only after your approval. The inspection covers the gimbal, motors, control board, GPS, and communication module — for each component, we record which part has failed and what repair options are possible. Approval happens before disassembly: you see the list of operations and understand what you're paying for. At Tech Service, the cost is quoted based on free diagnostics, not taken at random from a price list. In our practice, some requests are resolved with calibration or replacement of consumables, and the owner learns about this before the device is disassembled. Diagnostics are valuable not for the inspection itself but because afterward you make a decision with open data — you can decline restoration if the scope of operations isn't justified.

Repair at home or at the service center

We work in two formats: a mobile technician comes to you within 60 minutes anywhere in the city, or you bring the drone to our service center — both are handled by the same Tech Service employee, no middlemen. On-site service is convenient when the device won't start, drifts to one side, or has a cracked body after a fall: the technician opens it on the spot and immediately tells you which part needs replacing and which can be restored. You choose in-service repair when board soldering, gimbal ribbon cable replacement, or work with small components is needed — such operations require stationary conditions and can't be done on the fly. Quadcopter repair in any format starts with the same diagnostics, so the location only affects logistics, not the list of operations. The choice is dictated by the type of damage: propellers, arms, and the body are usually replaced on-site, while board soldering and gimbal ribbon cables require the stationary conditions of a service center.

What we check and replace by component

ComponentWhat we checkWork options
Gimbal and cameraribbon cable, gimbal motor, mountribbon cable, motor, module
Motors and ESCwinding, rotation, signalmotor, ESC, contact soldering
Control boardsigns of short circuit, tracessoldering, components, board
Body, arms, chassiscracks, geometryarm, body restoration
GPS, compass, IMUreadings, calibrationcalibration, module
Remote controller and communication moduleconnection, antennasantenna, module repair
Obstacle sensorsresponse to obstaclescleaning, sensor

Which drone brands and models we repair

We break down which brands and types of drones people bring to us most often, how quadcopter repair differs by class, and what that means for diagnostics.

DJI drones — Mavic, Air, Mini, Avata, Inspire, Matrice

DJI drones are the most common category in our practice: we repair Mavic, Air, Mini, Avata, Inspire, and Matrice, including gimbal, ribbon cables, motors, board, and communication module. The Mavic and Air line are consumer folding models where, after a fall, the three-axis gimbal with camera is the first to suffer. The Mini has a compact body and thin arms, so impacts with the ground more often affect the frame and connectors. The Avata is a protected FPV drone with propellers in ducts, so the load goes to the motors and ESC. The Inspire and Matrice are heavy platforms with greater mass, and on hard landings we check the gimbal mounts, ribbon cables, and power section. With DJI, most damage involves the gimbal and ribbon cables — they are the first to suffer in a fall even if the body looks intact, so we start diagnostics with them.

Autel, Xiaomi, and FPV drones

Besides DJI, we service drones from other brands, including Autel and Xiaomi, as well as FPV drones — they have their own specifics regarding motors, ESC, and frames. Autel and Xiaomi are consumer devices with a stabilized camera, and their failure logic is similar to folding DJI models: gimbal, ribbon cables, communication module, connectors after moisture. FPV drones are built for speed and sharp maneuvers, so the frame, arms, and electronic speed controllers are consumables during hard landings. FPV drones more often suffer motor, ESC, and frame damage after hard landings, while consumer Autel and Xiaomi models more often have gimbal and communication module issues, so diagnostics follow different scenarios. During a visit, the technician immediately clarifies the drone class — this determines which components we check first.

What problems people come with most often

  • Impact: hits against the ground, walls, and obstacles are the most common reason people contact us; after these we check the gimbal, frame, and mounts.
  • Moisture: water or snow causes corrosion on the board and connectors, so don't power the device on until it's been inspected.
  • Gimbal overload: this gimbal error signals a jammed motor, a bent ribbon cable, or a camera that's lost calibration.
  • Won't turn on: the drone is dead after charging or a crash — the cause is often the power system, button, or control board.
  • Won't take off: the device powers up but won't lift off the ground or drifts to one side — we check the motors and communication module.
  • Diagnosis summary: the type of issue can point to a narrow set of components in advance, but only free diagnostics gives the final answer, because one symptom can point to different parts.

Warranty and service terms

A warranty isn't a marketing slogan — it's the condition under which you come back to us if something goes wrong. Below is what exactly we cover, who will come to you, and how work is approved before it starts.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts: if the fault returns on our end after the repair is complete, you come back to us instead of looking for a new technician. The warranty covers both components at once — the installed part and the actions of the specialist who replaced it. This distinction is fundamental for drones: some failures are related to the part itself, not the installation, and without a warranty on the part you'd have to prove where the component came from. In my experience, people argue more about what counts as a repeat visit than about the work itself — that's why the terms are fixed before work begins, so we don't have to revisit that conversation later. A warranty on parts separate from labor matters because some failures are related to the part itself, not the installation — and in that case both the part and the repeat work are covered.

Technician experience and who comes to you

A Tech Service technician with 4 to 20 years of experience comes to you — the same specialist who then handles the repair at the service center, with no handing the drone off to third parties. This sets a direct contractor apart from an intermediary: one person handles diagnostics, approval, and repairs, so the history of the breakdown isn't lost between stages. The mobile technician arrives within 60 minutes across the city instead of sending you to a courier or through an intermediate link. With drones this shows up in tricky cases: a floating contact in the gimbal ribbon cable or a crack in an arm after a crash manifests differently depending on how the device was handled. Experience matters not in years but in the fact that the technician has already seen similar symptoms and narrows down the components faster during diagnostics — this saves time and reduces the risk of unnecessary replacements.

Payment and approval process

We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician quotes the price after free diagnostics — before work begins you know what you're paying for. Diagnostics are free and take place before any manipulations with the device, so the discussion is based on facts, not assumptions. Payment is accepted in the form that's convenient for you, and the price itself is determined after the inspection and agreed with you. Approval before work starts protects you from unexpected scope: if diagnostics reveal that an additional part is needed, the technician comes back to you for confirmation instead of doing it on the fly. In our practice, this step eliminates most disputes — you see the list of work before the drone is disassembled and can decline anything unnecessary.

Where to repair a drone in Almaty and how to call a technician

We explain where to take your drone and how to call a specialist: we work across the city with arrival within 60 minutes and two service formats — at your home or at the service center.

Technician arrival within 60 minutes across the city

Our technician travels anywhere in Almaty within 60 minutes — you're not tied to one district and you don't have to wait for a gap in the service schedule. We take requests at whatever location works for you: apartment, office, country house, or a flying site. On site, the technician inspects the body, arms, gimbal, and connectors, checks how the drone responds when powered on, and reads data from the remote controller. This format covers typical cases — frame cracks, bent arms, knocked-off calibration, damaged camera cable. A visit makes sense when the problem doesn't require workshop conditions: if the inspection shows that board soldering or motor replacement with body disassembly is needed, the technician takes the drone to the service center and returns it after the work. Before the visit, describe the symptom over the phone — this helps bring the right parts and avoids stretching the appointment into a second trip.

Direct provider, no middlemen

Tech Service is a direct provider: your drone is serviced by our own technician, not passed through an aggregator or middleman, so you talk to the person holding the tools. Your request isn't resold to a third party, and the same person handles diagnostics and repairs — from the first inspection to the post-assembly check. Our experience ranges from 4 to 20 years across different equipment classes, from compact Minis to heavy Matrices. A direct provider matters for the warranty: if you make a warranty claim, you return to the same employee and the same work, not start over with a new contractor. Knowing exactly who is responsible for the result saves time when you need to clarify a detail about completed work — the question is resolved with the person who remembers your device.

How to book diagnostics

You can book either a technician visit or service at the center — diagnostics are free, and based on the results you decide whether to proceed with the work. Describe what's happening with the device: it won't turn on, it drifts to one side, the motor hums, or an error appears on the remote controller screen. Based on your description, the employee will suggest the right format and agree on a visit time. They quote the cost of work after the inspection, once the cause is clear — until then you don't confirm anything. If the symptom is intermittent and the drone "sometimes" won't turn on, it's better to book a visit: the technician will see the behavior on site, not just hear about it. Fixing a quadcopter this way is simplest: first inspection, then a decision — repair, replace a component, or decline the work.

Quadcopter repair essentials for pilots

To sum up diagnostics and drone repair: what to remember before contacting a technician and which signs of failure to look at first.

  • Power after a fall: don't turn the drone on after an impact or moisture exposure — reapplying power makes the damage worse and adds more damaged components to the list.
  • What you can do yourself: it's safe to replace propellers and check arm mounts, but leave body disassembly and board soldering to a technician.
  • Gimbal overload error: a shaking camera and gimbal failure more often point to a damaged ribbon cable than to a firmware software error.
  • Diagnostics first: inspection should come before repair — its results determine the scope of work and the list of parts to replace.
  • Warranty as a criterion: the provider's responsibility period for labor and parts is one of the conditions to consider when choosing a service center.

7brands

Which quadcopter brands we repair in Almaty

We repair drones from popular brands. DJI drone repair service center in Almaty.

We also repairWe also repairTECH SERVICE09

Besides quadcopter repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before quadcopter repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp