Original
Manufacturer's part
- Selection
- by part number or machine model
- Marking
- for Bosch — E-Nr on the label inside the door
- Compatibility
- matches the model and series
- Cost
- given after free diagnostics
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We'll connect the machine to water and drainage, check the fill and drain. A technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
freediagnostics
The technician unpacks the machine, removes the shipping bolts, levels the body, and connects the hoses to the water supply and drainage. Then they check the water fill and drain, inspect the connections for leaks, and run a short cycle.
01
Step 1—
Releases the drum from the shipping bolts and removes the packaging so the machine runs without vibration.
02
Step 2—
Adjusts the feet so the body stands steady and doesn't touch the hoses or walls.
03
Step 3—
Attaches the inlet hose to the tap, checks the connection is tight and there are no leaks.
04
Step 4—
Secures the drain hose to the siphon or drain outlet at the right height so water flows away.
05
Step 5—
Runs a short cycle, checks the water fill, drain, and that there are no leaks under the machine.
5
The service is ordered when buying a new appliance, moving, or replacing an old machine, as well as when the unit needs to be moved to another location or built into furniture. The technician connects the machine to the water supply and sewer, levels it, checks its operation, and configures the main modes.
Buying a new machine
After a new washing machine is delivered, the technician unpacks it, removes the shipping bolts, and connects it to the utilities.
Moving to a new place
When changing apartments or offices, the technician disconnects the appliance, helps prepare it for transportation, and installs it at the new address.
Replacing old equipment
When the old machine breaks down, the technician removes it and installs a new one in the vacated space.
Relocating to another room
If the machine needs to be moved to the bathroom, kitchen, or another room, the technician connects it to the pipes and drain at the new location.
Built-in furniture installation
To install the machine in a cabinet or niche, the technician adjusts the connections and levels the body in place.
You can drain the water through the emergency hose next to the filter — the water may be hot.
Describe the symptomsThe part is selected by part number or machine model. For Bosch, the E-Nr is on the label inside the door.
Original
or
Analog
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
Installation and connection of washing machineexact price — after the free diagnostics
1–2 hours
from6 000 ₸
Installation of built-in washing machineexact price — after the free diagnostics
2–4 hours
from10 500 ₸
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsSenior washing machine repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the problem over the phone — the technician will arrive with tools and equipment. The cost of work and parts is agreed before repair begins.

Warranty question? Call us
+7 (778) 746 00 267 898 reviews of repairs at TECH SERVICE in total
Сабина Г.Order No. 564334 · 23 September 2026
oursХотел сначала вызвать мастера на дом, потом передумал. Жалоба простая: течёт. Вернули в тот же день, всё функционирует
Богдан С.Order No. 69617 · 14 July 2026
oursСимптом был очевидный: не отжимает. В techservice попал случайно — и остался. Сказать, что доволен — ничего не сказать.
Айгуль К.Order No. ZK-2025/223 · 11 September 2025
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Уже не верил, что это можно починить. Повод для визита: не сушит. Дима помог выбрать, без навязывания. Могли бы взять больше, но взяли по-божески. Заодно поменяли: тэн. Tech-service посоветовали в чате дома, спасибо им. Второй месяц — полёт нормальный!!
Ксения И.Order No. 819682 · 12 May 2025
oursСмотрел, у кого есть запчасти на такую модель. Позвонили заранее, предупредили, что задержиться на полчаса. Пользуюсь ежедневно, вопросов нет!!
Ержан А.Order No. TS-1927 · 3 May 2024
oursС чем пришёл: течёт. Ораз принял, посмотрел и сразу сказал, что делать. Проверили на всех режимах, всё чётко!!
Кристина Л.Order No. TS-9241 · 13 January 2021
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Отдал мастеру: стирально-сушильная машина. Симптом был очевидный: не сушит. Ораз взялся за то, от чего другие отказались. Сначала сказали одно, потом уточнили, но в итоге всё совпало. Оплатил картой, чек дали. В списке работ — тэн. Не пожалел ни разу. Ребёнок уже проверил на прочность, держится
Владимир Н.Order No. ZK-5322 · 16 October 2019
oursЖалоба простая: течёт. Работает как раньше, придирок нет. Сделали и забыл про проблему.
Алмас Д.Order No. ZK-2018/189 · 30 September 2018
oursСимптом был очевидный: не сушит. Рустем Т перезвонил, когда всё было готово. Гудит ровно, не греется, всё как надо.
Виктор Ф.Order No. TS-6901 · 15 June 2017
oursПробовал найти мастера в своём районе, но все были заняты. Пользуюсь ежедневно, вопросов нет.
Мирас С.Order No. TS-6042 · 15 January 2017
oursОтдельно спосибо мастеру — Рустем Т, терпения ему хватило. Запчасть была в наличии, доплачивать не пришлось. Проверили при мне, показали, что всё держит
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIf the machine is new and you have the time, you can try it yourself, but a technician ensures proper connection to water and drainage, leveling, and a test run. Mistakes during DIY installation often lead to vibration, leaks, and breakdowns.
Installation usually takes about an hour, but it may take longer with complex connections or if leveling is needed. The exact time depends on the conditions and the machine model.
If you don't remove the shipping bolts, the machine will vibrate heavily and "jump" during the spin cycle, which can damage the drum and other components. Be sure to remove the bolts before the first run.
Yes, if you have the skills to connect to water and drainage and feel confident. But without experience, it's easy to make mistakes with leveling or sealing connections, which can cause vibration or leaks.
Yes, for safety it's advisable to connect the machine through a dedicated circuit breaker and ensure grounding. This protects against electric shock and damage to electronics during voltage surges.
Yes, we provide a 1-year warranty on labor and parts. If problems arise after installation due to our fault, a technician will come and fix them.
Tech Service installs washing machines at your home in Almaty: our technician arrives within 60 minutes anywhere in the city, diagnostics are free, and we provide a 1-year warranty on labor and parts. We connect the machine to water, drainage, and power, remove the shipping bolts, level it, and test it with a trial run.
Installation and connection are not the same thing, and confusing them can lead to vibration, leaks, and errors on the first spin. Let's clarify where the owner's responsibility ends and the technician's work begins.
Connection is just water, drainage, and power, while installation includes unpacking, removing shipping bolts, leveling, and a test run. Shipping bolts secure the drum during transport: if you don't remove them, the drum hits the body during the spin cycle and the machine literally jumps across the floor. Leveling distributes the weight across all four legs—a tilt of just a couple of degrees causes noticeable knocking even at medium speeds, typically 800–1600 rpm depending on the model. At this stage, the flexible hose and drain hose are checked for leaks under pressure, not just screwed onto the threads. If you skip leveling and testing, the machine is formally "connected" but vibrates and shows an error on the first spin—that's why installation and testing are done as a single cycle.
We break down the work into stages—from checking the location and utilities to the test run—so you understand what the technician is responsible for and what you'll see at handover.
Our washing machine installation in Almaty starts with checking the location and utilities, then we remove the shipping bolts, connect water, drainage, and power, level the unit, and finish with a test run on different programs. Water connection includes a flexible hose to the cold water supply via a separate valve, a drain hose secured at the correct height, and a grounded outlet—no extension cords or daisy-chained adapters for permanent use. Shipping bolts are removed before the first power-on: if even one is left in, the drum hits the walls during the spin cycle. We level the machine using a spirit level, adjusting the feet so it stands without wobbling on the floor. A dedicated circuit breaker and grounding are checked before connection—if the line is weak, the technician will tell you before starting work.
| What we check | How we check | Normal indication |
|---|---|---|
| Water fill | Start a short program | Drum fills smoothly |
| Connection tightness | Inspect hoses and valve | Dry at joints and threads |
| Drain and hose height | Drain during spin | Water drains and doesn't flow back |
| Spin cycle | Program with maximum speed | Machine stands without vibration |
| Leaks under machine | Inspect floor after cycle | Floor dry near legs |
Most "breakdowns" after a move or first installation are the result of connection mistakes. We break down typical symptoms and their causes so you understand where adjustment helps and where repair is already needed.
Transport bolts left in place cause strong vibration and damage the drum, improper leveling leads to imbalance during spinning, and loosely tightened connections cause leaks from below. The bolts secure the drum to the body during transport, and they must be fully unscrewed; leaving even one in place damages the drum mount. The feet are adjusted using a spirit level: a tilt of just a couple of degrees already causes drum displacement and knocking at 800–1600 rpm. A leak from below usually comes from the hoses and inlet hose—a loosely tightened connection lets water seep under the machine. Vibration is dangerous not in itself—it makes the machine "walk" out of place and overloads the bearing, so the cause must be fixed before the first serious wash. If installation has already caused damage, washing machine repair and installation are carried out based on the results of free diagnostics.
A drain error after installation is more often related to drain height or a pinched hose rather than a pump failure—E18 or F18 (d02 on some models) indicates a drain problem, E17 or F17 means water is not filling within the allotted time. The drain hose should not be pinched by a foot or baseboard, and its height determines the level below which water drains by gravity. The code value depends on the model; the technician checks it against the table for your machine—on Samsung it's 5E (SE, E2), on Electrolux E20, on Indesit and Hotpoint F05, and the cause is not determined from a single code. At Tech Service we start with free diagnostics: we check the hose, filter, and valve before giving a repair verdict. Before calling, unplug the machine, drain the water through the emergency hose behind the service flap at the bottom front, placing a towel underneath—the water may be hot.
Built-in models, new buildings without ready-made connections, old housing stock, and balconies require a separate approach—we explain what changes in the work and what to look at in advance.
We install a built-in machine into kitchen cabinetry taking into account ventilation and access to the service flap, and in a new building we first check whether the water and sewer connections are ready. For a built-in model, the gap under the countertop, attachment to the furniture, and free access to the drain filter at the bottom front are important—if access is blocked by a plinth, the filter cannot be cleaned without disassembling the cabinetry. In new buildings, we check whether the water and sewer connections are ready and whether there is a shut-off valve before connecting. Installing a washing machine in a bathroom where there is no separate tap is possible—a tap is spliced into the water supply before installation, otherwise the appliance would have to be disconnected from the common line every time. A splice with a separate tap simplifies maintenance: the machine does not need to be disconnected from the common line when cleaning the filter.
The technician comes to your home, and after the work you receive a warranty and a clear area of responsibility. Below—why a direct contractor is more convenient than an aggregator and how the cost is formed.
Tech Service is the direct contractor: our technician comes to you, not a middleman from a marketplace, and we provide the 1-year warranty on labor and parts, not a third party. The technician who comes to your home installs the machine and is responsible for the result. A middleman between you and the technician adds an extra link: one party takes the request, another does the work, and there's no one to make a claim against. When installation and repair are handled by the same service, if something goes wrong you don't have to figure out who's at fault between the aggregator and the technician — the responsibility is the same. So when choosing a contractor, ask who exactly provides the warranty: the warranty should come from the party that performs the installation. Practical tip: find out in advance who takes the request, who comes to the site, and who is responsible under the warranty — if these are different parties, the risk of shifting responsibility is higher.
The cost of installing a washing machine depends on the type of machine and the condition of the utilities, and the technician quotes the installation price after a free diagnostics, not from a rough price list; the technician arrives within 60 minutes anywhere in the city. The installation cost is made up of the scope of work: a freestanding model with ready-made connections is one scenario, a built-in model in a new building is another. Prices on the Almaty market vary precisely because of these conditions, so the technician quotes the cost after a free diagnostics. Free diagnostics before work: if the water or electrical connections aren't ready, this is determined before installation begins. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and to call a technician, describe the model and address — this way the specialist knows in advance what equipment and utilities they'll be dealing with.
The result depends on three things: the machine stands level, the connections are sealed, and the machine has been tested for water fill and drain before the first wash.
If you ask, the technician will check other parts during the same visit.
Refrigerator Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read
If your washing machine won't spin, it's usually an unbalanced load, a clogged drain filter or hose, and less often the pump, belt…
19 January 2026 · 12 minutes read
If your washing machine isn't heating water, the heating element or temperature sensor is usually to blame, less often the control board or wiring.
25 December 2025 · 12 minutes read
If your washing machine won't turn on, first check the outlet, extension cord, and the circuit breaker in your panel, then the plug and power cord.
24 November 2025 · 13 minutes read