experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Eight common symptoms and the likely causes a technician checks first. The exact part is identified after diagnostics.
start relay, thermostat, compressor
from7 500 ₸
defrost sensor, defrost heater, timer
from6 000 ₸
clogged drain, channel, door seal
from5 000 ₸
compressor wear, installation, fan
from10 500 ₸
the code points to a specific part
from9 500 ₸
leak, fan, sensor
from6 000 ₸
thermostat, sensor, door seal
from9 500 ₸
thermostat, sensor, damper
from9 500 ₸
The table shows how much refrigerator repair costs in Almaty for a Zanussi: the "from" price for labor without parts and the time frame; the technician confirms the total before starting the repair.
1 visittime
from 9 500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the appliance after repair.
Agree on a convenient visit time and a contact channel for confirmation.
A technician arrives within 60 minutes anywhere in the city, traveling to your address in their own vehicle.
The technician asks about the model, symptom, and error code to bring the right tools and parts.
You approve the scope of work and the part, and only then does the technician start.
The technician turns on the refrigerator and checks that the compartments cool and all parts work.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsField refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience8 yearsExpert washing machine repair technician
We reply during working hours
Choose a convenient contact channel and visit time — agree on a day when it suits you to receive the specialist.

Warranty question? Call us
+7 (778) 746 00 267 898 reviews of repairs at TECH SERVICE in total
Асель Ж.Order No. 2026-4630 · 5 February 2026
oursДолго искал, кому это отдать, и вот нашёл. Повод для визита: намерзает лёд. Никита М объяснил причину так, что понял даже я. Сказали 32 500, я согласился без торга. Диагностику сделали бесплатно, хотя я был готов платить. В списке работ — уплотнитель. Рекомендую. Проверили при мне, показали, что всё держит
Алексей Г.Order No. TS-2501-114 · 4 August 2025
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. По деньгам вышло адекватно, в другом месте просили больше. Уже полгода — ни одного сбоя)
Мадина Т.Order No. TS-7219 · 28 November 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Нужен был ремонт холодильника — обратился сюда. С чем пришёл: шумит. Сказали 27 000, а потом ещё и скидку сделали. Приехал вечером, мастер ещё был на месте. Заодно поменяли: термостат. В помещении тесновато, но это мелочи. Внешне как новый, если не считать мелкой царапины!!
Индира П.Order No. ZK-1617 · 20 September 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Техсервис на Абая, если не ошибаюсь, — вот туда и поехал. Проверили на всех режимах, всё чётко!!
Лилия В.Order No. TS-4770 · 30 May 2024
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Основная жалоба — намерзает лёд. Проверили при мне, показали, что всё держит.
Светлана Д.Order No. ZK-2019/136 · 30 May 2019
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Честно, уже готовился покупать новое, но обошлось. Проблема — шумит. Проверил дома — всё на месте, ничего не забыли.
Аяна Е.Order No. 25364 · 9 December 2017
oursОтдал мастеру: холодильник. Жалоба простая: шумит. Никита М объяснил причину так, что понял даже я. Смета совпала с итогом, что редкость. Поставили новую деталь: термостат. Мастер сразу сказал, что к чему, без размытых формулировок. Нагрев в норме, посторонних звуков нет.
Станислав К.Order No. TS-3337 · 28 February 2017
oursПовод для визита: шумит. Дильмурат С всё объяснил и не пытался впарить лишнее. Уже полгода — ни одного сбоя.
Сергей Р.Order No. ZK-8150 · 20 March 2016
oursХотел сначала вызвать мастера на дом, потом передумал. Нужен был ремонт холодильника — обратился сюда. Основная жалоба — шумит. Всё оформили по договору, с печатью. Заодно поменяли: термостат. Вышло 34 500 тенге, дешевле, чем я рассчитывал. Однозначно да. Проверил дома — всё на месте, ничего не забыли.
Евгений М.Order No. TS-5582 · 15 February 2016
oursДолго откладывал ремонт, потом всё-таки собрался. Привёз на диагностику: холодильник. С чем пришёл: намерзает лёд. Ни копейки сверху, как и обещали. Разобрали, посмотрели: уплотнитель. Приняли без очереди, оформили за пять минут. Хороший сервис, побольше бы таких. Крутит ровно, без рывков
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIn Zanussi No Frost models, frost usually appears due to a faulty defrost sensor, heating element, or clogged drain, and less often due to a refrigerant leak. The technician will determine the exact cause after inspection, depending on the model.
The red Alarm indicator on Zanussi usually signals a temperature rise in the compartment rather than a malfunction itself. If it doesn't go off after closing the door and a few hours of operation, diagnostics are needed.
Yes, the technician performs most inverter Zanussi repairs at home: diagnostics, replacing the board or compressor. The appliance is taken to the service center only in complex cases, depending on the model.
Most often it's a refrigerant leak, a faulty fan, or a clogged capillary tube, which prevents cold from reaching the fridge compartment. An at-home diagnostic will show whether recharging or replacing a component is needed.
Yes, for Zanussi as for other brands, a power surge can damage the control board or start relay, especially in inverter models. After such an event, it's best to have a technician check the fridge.
You can turn on the fridge and listen to whether the motor starts, and also check if the compartments are cooling. If the compressor hums but doesn't start, or is silent, you can't determine the cause without instruments—you need a technician.
Tech Service repairs Zanussi refrigerators in Almaty with its own technicians, each with 4 to 20 years of experience. A technician arrives within 60 minutes anywhere in the city, diagnostics are free, and there's a 1-year warranty on labor and parts. We give the price after diagnostics and accept payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies.
Zanussi refrigerators fail in a few typical ways, and the symptom often points to the faulty component. Let's go over the most common cases and their signs.
If the freezer stays cold but the upper compartment is warm, the cause is usually the evaporator fan, the damper, or a defrost failure in the No Frost system. The fan moves cold air from the freezer to the fridge compartment, and if the fan stops or the air duct freezes up, the upper section stops cooling. The motorized damper closes the airflow on command from the control board, while the defrost heater and temperature sensors handle the evaporator defrost cycle. Frost on the back wall of a Zanussi indicates a defrost failure or a loose door seal that lets moist air in. A simple check: listen for the fan running after you close the door; silence with the compressor on narrows it down to the fan and its circuit. If you hear the fan but there's no cold, inspect the damper and defrost sensors.
Frost on the back wall indicates a defrost failure or a loose door seal, water at the bottom points to a clogged drain, and a complete failure to turn on after a power surge is most often linked to the control board. The drain channel carries condensate to a container above the compressor, and if it's clogged, moisture collects at the bottom of the compartment under the drawers. The control board powers the compressor, fan, and dampers, so after a power surge it's the first to fail, and the unit stays silent even with a working motor. Check the door seal with a sheet of paper clamped in the door — if it falls out without resistance, the seal is already compromised. This test takes a minute and helps you understand in advance whether you need a door seal replacement for Zanussi refrigerator repair, not just a drain cleaning.
The Zanussi display doesn't show a signal for nothing — each one points to a specific component that the technician checks first. Let's look at how to read the appliance's hints and when an indicator means a mode, not a fault.
Our technicians decode Zanussi error codes using the brand's service table and immediately turn them into a check plan for the specific component — sensor, board, or defrost system. The combination on the display doesn't mean 'the compressor is broken': it points to the circuit where the control board detected a deviation. The same signal with different symptoms leads to different causes, so decoding always goes together with an inspection. The control board compares temperature sensor readings with the norm and triggers a signal when the difference exceeds the tolerance. Our diagnostics are free: the technician arrives, reads the combination, and checks exactly the circuit it points to, not the whole appliance — this saves time and money. Note the value and when it appeared (after defrosting, a power surge, a move) — this detail often cuts diagnostics time in half.
The Alarm indicator lights up when the temperature inside the compartment stays above normal for longer than a set time — it's a signal, not necessarily a breakdown. The red light is tied to temperature sensors: the control board detects overheating in the compartment and warns you while the compressor tries to restore cold. Common causes include a door that isn't closed tightly, warm food just loaded, a misadjusted thermostat, or the Vacation mode being on, which intentionally keeps the fridge compartment from cooling. After loading warm food or leaving the door open for a while, the indicator usually goes off by itself within a few hours; if it stays on for a day, that's a reason to get diagnostics. Before calling a technician, check the door seal and the mode setting: sometimes that's enough to make the light go off without any intervention. If it keeps flashing with the door firmly closed and a normal load, then the issue is in a component and needs to be checked with a meter.
| Code group | What we check | Typical symptom |
|---|---|---|
| Temperature sensor | compartment thermistor, contacts | not cooling, Alarm |
| Defrost system | heater, timer, fan | frost, ice on the wall |
| Board communication | control module, harnesses | won't turn on, glitches |
| Compressor | start relay, windings | hums, won't start |
Inverter Zanussi models are built differently, and diagnostics here start from the board and sensors rather than the compressor. Let's look at how this changes troubleshooting and the repair itself.
The inverter compressor in a Zanussi smoothly varies its speed instead of constantly switching on and off, so it wears out mechanically more slowly than a conventional one. In this design, the motor doesn't start with a jolt through a start relay — the control module sets the rotation speed based on the current load: after loading food, the speed increases, and once the cold is stable, it drops to a minimum. This means lower starting currents, quieter operation, and more even temperature in both the fridge and freezer compartments. The mechanical lifespan of the unit increases precisely because there are no start-stop cycles, not because of special materials in the piston group. The weak point of inverter models is not the compressor itself but the board that controls it: voltage spikes hit the electronics first and can damage the power switches. That's why when a customer complains that the fridge won't start, the technician first checks the module's power supply and the integrity of the power components, not the motor windings.
Most work on an inverter Zanussi we do on-site — from board diagnostics to replacing sensors and start components. The technician comes with tools and performs diagnostics for free so we don't replace parts at random. If the conditions on-site aren't suitable for a specific operation, the technician will arrange a repair at the service center. The one-year warranty covers both labor and parts — regardless of where the work was done. In my view, that's what matters most to the owner: it doesn't matter where the appliance was fixed, what matters is that the same technician is responsible for the result. We keep our arrival time within 60 minutes in the city, and we accept Kaspi QR, Kaspi Red, card, cash or bank transfer — cash and card.
| Parameter | Conventional Zanussi | Inverter Zanussi |
|---|---|---|
| What we check first | compressor, relay | board, sensors |
| Compressor start | relay, windings | control module |
| Common cause of failure | wear, leak | voltage spike |
| Where we repair | more often on-site | on-site or at the service center |
Zanussi refrigerator repair at home follows a clear procedure — from request to post-service check. We break down each stage: how the visit begins, what the technician checks on site, and what operations they perform.
After you submit a request, our technician arrives within 60 minutes anywhere in the city — with their own tools, and starts with free diagnostics. We repair Zanussi refrigerators in Almaty on-site: you can request service by phone or on the website, and the specialist will confirm the model, symptom, and address. Our field technician works on both standard and inverter Zanussi models, so you don't have to wait for a narrow specialist. Diagnostics are free — you get the cause of the breakdown and the cost of work, and you decide what to do next. This approach saves time: no need to take the refrigerator to a service center. Before the visit, please clear access to the back of the appliance — this speeds up disassembly and inspection of components.
We recharge refrigerant while fixing the leak, replace the compressor, thermostat, and start relay, and repair the control board of Zanussi refrigerators. Recharging is done by weight specified on the model's nameplate, not by eye — overcharging is just as harmful as undercharging. When replacing the motor, we select a unit for the specific series and capacity, and also replace the filter drier and check solder joints for leaks. For local electronic faults, we repair the board: re-solder contacts, replace relays and triacs, and if damage is extensive, install a new module. We provide a 1-year warranty on labor and parts. Recharging without finding the leak is pointless — refrigerant will escape again, so the technician first locates the leak and then tops up the circuit.
Some Zanussi complaints can be resolved without a technician visit, and other concerns are covered by the warranty and clear service terms. Let's look at what's caused by usage and when you need to call.
We provide a 1-year warranty on labor and parts — it also covers replacing the compressor in a Zanussi refrigerator. The warranty covers repeat visits too: if the symptom returns, the work is done under the warranty, not as a new request. The warranty applies to both labor and parts — that's enough for the technician to come out under it if the issue recurs. In my view, this is the point most often left out of the conversation when choosing a contractor, even though it determines what the second breakdown of the same unit will cost. A year is the period during which both installation defects and part failures show up, so there's no need to extend it artificially. Before agreeing to the work, ask exactly what the warranty covers — labor and parts, or just labor.
We work as a direct contractor with our own technicians, each with 4 to 20 years of experience — no middlemen or call centers, so the price is given after a free diagnostic, not over the phone. Diagnostics are free, the technician arrives within 60 minutes anywhere in the city, and you can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies. A direct contractor is responsible for the result: the request isn't resold to a third party, and the technician who arrives sees the job through to the end. Ask who exactly will come and what's included before you pay — that's how you weed out middlemen who resell requests. The second question is how the price is framed: a figure quoted over the phone is almost always provisional, because without an inspection it's unclear whether the compressor, the board, or the seal needs replacing. Third, clarify what the warranty covers: labor and parts, or just labor.
Diagnosing Zanussi breakdowns comes down to a simple logic: first the symptom and code, then checking the unit, and only then replacing parts. Here's what to keep in mind before calling a technician.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












