experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We'll be at your door within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Symptoms customers most often report. The technician will pinpoint the exact cause after diagnostics.
refrigerant leak or compressor failure
from10 500 ₸
faulty defrost sensor or heating element
from6 000 ₸
clogged drain or misaligned tray
from5 000 ₸
loose compressor mounts
from24 500 ₸
sensor or control board malfunction
from11 500 ₸
no power or protection tripped
from7 500 ₸
stuck thermostat or refrigerant leak
from9 500 ₸
worn gasket or door misalignment
from7 500 ₸
The table shows prices for Snaige refrigerator repair in Almaty: a starting labor cost without parts and the timeframe; the technician confirms the final amount before any work begins.
1 visittime
from 6 500 ₸cost

BeforeAfter5 steps

From request to performance check — five steps.
Describe the symptom and your Snaige refrigerator model so the technician brings the right tools.
The technician will schedule the visit around your availability.
The technician rechecks the replaced component and makes sure it works correctly.
The technician performs the work on-site and replaces components without taking the appliance away.
The technician measures the temperature in the compartments and runs a test cycle.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsField refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience8 yearsExpert washing machine repair technician
We reply during working hours
Describe the symptom and your refrigerator model — the technician will arrive with the right tools within 60 minutes. Free diagnostics, 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 746 00 267 898 reviews of repairs at TECH SERVICE in total
Асель Ж.Order No. 2026-4630 · 5 February 2026
oursДолго искал, кому это отдать, и вот нашёл. Повод для визита: намерзает лёд. Никита М объяснил причину так, что понял даже я. Сказали 32 500, я согласился без торга. Диагностику сделали бесплатно, хотя я был готов платить. В списке работ — уплотнитель. Рекомендую. Проверили при мне, показали, что всё держит
Мадина Т.Order No. TS-7219 · 28 November 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Нужен был ремонт холодильника — обратился сюда. С чем пришёл: шумит. Сказали 27 000, а потом ещё и скидку сделали. Приехал вечером, мастер ещё был на месте. Заодно поменяли: термостат. В помещении тесновато, но это мелочи. Внешне как новый, если не считать мелкой царапины!!
Индира П.Order No. ZK-1617 · 20 September 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Техсервис на Абая, если не ошибаюсь, — вот туда и поехал. Проверили на всех режимах, всё чётко!!
Лилия В.Order No. TS-4770 · 30 May 2024
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Основная жалоба — намерзает лёд. Проверили при мне, показали, что всё держит.
Аружан К.Order No. ZK-2416 · 24 February 2023
oursДо этого обращался в другой сервис, там только развели руками. Проблема — не морозит. Проверили при мне, показали, что всё держит.
Алексей Г.Order No. TS-4782 · 30 August 2021
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Приехал из командировки, а дома — шумит. В списке работ — уплотнитель. Проверил дома — всё на месте, ничего не забыли
Аяна Е.Order No. 25364 · 9 December 2017
oursОтдал мастеру: холодильник. Жалоба простая: шумит. Никита М объяснил причину так, что понял даже я. Смета совпала с итогом, что редкость. Поставили новую деталь: термостат. Мастер сразу сказал, что к чему, без размытых формулировок. Нагрев в норме, посторонних звуков нет.
Станислав К.Order No. TS-3337 · 28 February 2017
oursПовод для визита: шумит. Дильмурат С всё объяснил и не пытался впарить лишнее. Уже полгода — ни одного сбоя.
Сергей Р.Order No. ZK-8150 · 20 March 2016
oursХотел сначала вызвать мастера на дом, потом передумал. Нужен был ремонт холодильника — обратился сюда. Основная жалоба — шумит. Всё оформили по договору, с печатью. Заодно поменяли: термостат. Вышло 34 500 тенге, дешевле, чем я рассчитывал. Однозначно да. Проверил дома — всё на месте, ничего не забыли.
Евгений М.Order No. TS-5582 · 15 February 2016
oursДолго откладывал ремонт, потом всё-таки собрался. Привёз на диагностику: холодильник. С чем пришёл: намерзает лёд. Ни копейки сверху, как и обещали. Разобрали, посмотрели: уплотнитель. Приняли без очереди, оформили за пять минут. Хороший сервис, побольше бы таких. Крутит ровно, без рывков
Didn’t find the answer? Message us on WhatsApp.
Ask a questionSigns of a board failure include an error on the display, blinking indicators, and erratic operation: the fridge turns itself on and off or won't start at all. A technician makes the exact diagnosis after checking the control module during diagnostics.
It depends on the model: most often the cause is a refrigerant leak, a faulty fan or defrost heater in the No Frost system, or a clogged capillary tube. The technician checks the circuit and defrost assembly during diagnostics.
A little frost with a drip system is normal and disappears during defrosting. If there's a lot of ice and it doesn't melt, the thermostat, defrost sensor, and drain hole—which may be clogged—are checked.
Original parts for older Snaige models are harder to find, but many components can be matched from compatible alternatives. The technician will tell you after diagnostics which parts will fit your model.
Make sure the plug is firmly in the socket, the power supply is stable, and the door is closed. If the clicking continues and it doesn't get cold, the likely cause is the start relay or compressor—you need a technician.
Yes, with an error the appliance may be running under overload, and food in the compartments will start to spoil. It's better to unplug the unit and call a technician to read the code and check the control module.
Tech Service repairs Snaige refrigerators in Almaty with its own technicians who have 4 to 20 years of experience. A technician arrives within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. The technician provides the cost after inspection.
Snaige refrigerators fail in several typical ways, and the technician already narrows down the causes during diagnostics based on the symptom. Let's look at the most common breakdowns.
If the light is on but there's no cold, we first check the compressor and the cooling circuit — most often the cause is a refrigerant leak or the motor not starting. In two-compartment Snaige refrigerators, a refrigerant leak shows up like this: the freezer still holds cold, but the fridge compartment is already warm, because gas escapes from the first circuit and the evaporator in the upper compartment stops cooling. A clogged capillary gives a similar picture — the unit hums, the condenser stays cold, and the pressure on the gauge doesn't rise. The start relay is checked separately: when it has tripped but the shaft doesn't turn, the unit doesn't start at all. A leak and a motor failure are easy to confuse by external signs, so the technician first listens to the start-up and measures pressure in the circuit rather than replacing parts at random. In such cases, Snaige refrigerator repair starts with free diagnostics to pinpoint the cause.
Continuous operation and clicking during start-up most often point to a thermostat, start relay, or a clogged capillary tube. A thermostat with worn contacts stops breaking the circuit, and the motor runs non-stop; the compartments get cold properly, but the appliance never rests. A clogged capillary tube forces the unit to work at its limit, and the relay clicks after each failed start attempt. The control module is checked when the clicks repeat in a clear rhythm and the display flashes. That sound means the compressor is trying to start; if it repeats and no cold builds up, you shouldn't delay, or the motor will fail completely. During diagnostics, the technician measures the starting current and winding resistance to separate a worn relay from a seized compressor and avoid replacing a working part.
Ice buildup in the fridge compartment and a door that doesn't close tightly are most often caused by a worn door seal or a fault in the evaporator. When the rubber loses its elasticity, warm moist air gets inside, settles on the back panel of the evaporator, and turns into a layer of ice. The constantly running motor due to poor sealing adds to the loss of cold. A faulty defrost sensor gives the same picture: ice builds up on the back wall, and defrost doesn't start. The seal is checked with a simple paper test around the door perimeter: if the sheet pulls out without resistance, the seal is already compromised. A worn seal is replaced with a compatible profile, and the defrost sensor is tested for continuity and compared with the table for the specific model.
The Snaige self-diagnosis system displays a signal, and that signal narrows down the fault. Let's look at what typical error groups mean and how the technician works with them.
A signal on the Snaige display indicates a fault group — sensor, electronic module, or compressor circuit — and we decode it during diagnostics based on the refrigerator model. The self-diagnosis system polls the temperature sensors in the fridge and freezer compartments, evaporator, and condenser, and also monitors communication with the board. Based on the combination of signals, the electronics generates a code: some indicate an open or short circuit of a specific sensor, some indicate a data exchange failure between the board and peripherals, and some indicate problems in the motor's start circuit. The technician reads the code, checks it against the table for the specific model, and confirms the diagnosis with multimeter measurements — no random part replacement. The same combination on different Snaige models can mean different things, so the decoding is always checked against the specific model, not read from a general table.
The thermostat isn't signaling the compressor to turn on, even though the motor itself is working—we check this by measuring resistance and doing a start test. The thermostat closes and opens the power circuit based on the temperature inside the fridge: if the contacts are burnt or the calibration is off, the motor simply doesn't get the signal and the fridge stays warm while the light is on. The compression motor may be mechanically fine but fail to start due to the start relay, windings, or no command from the board. The technician tests the windings for continuity, measures resistance, checks the relay, and supplies power directly to separate a cooling unit fault from a circuit failure. If the motor starts bypassing the thermostat and cools, the problem is in the control circuit, not the unit itself.
The electronic board in Snaige fridges most often suffers from power surges, which show up as erratic signals or the fridge refusing to turn on. The module powers the sensors, controls the motor and defrost, and a surge burns out the input circuits, stabilizer, or traces—then self-diagnostics give a set of codes that don't match the actual state of the components, or the screen goes dark entirely. The technician opens the unit, inspects the board for signs of overheating and burnt spots, checks the power supply and sensor circuits with a multimeter, and then decides on recovery. Recovery starts with checking the power supply and sensor circuits: sometimes repairing the board is enough instead of a full replacement. Before plugging the repaired fridge back in, it's worth installing a voltage stabilizer—it removes the main cause of repeat electronics issues.
Snaige is a Lithuanian brand with durable compressors and its own electronics logic. Servicing these fridges requires knowledge of the design, not a one-size-fits-all approach to any appliance.
Snaige fridges are assembled in Lithuania, and the brand has durable compressors but its own layout of the cooling circuit and electronics that a technician must take into account when disassembling. The compressor here is the key cooling component, and the evaporator and capillary tube are placed more tightly than in many budget brands. The filter-drier sits right next to the condenser, and the control module is often hidden behind a decorative panel rather than in plain sight. Because of the tight layout, access to the capillary tube and filter-drier requires care to avoid damaging adjacent circuit elements. In my view, this density is what sets work on the brand apart: a careless move with the soldering iron touches a neighboring tube, and after sealing the circuit a new leak appears. Before disassembly, the technician should photograph the wiring diagram—during reassembly this saves time and eliminates confusion with terminals.
Yes, when the original compressor is unavailable, we select an analog by specifications, and this replacement is covered by a 1-year warranty on the part. Selection is based on cooling capacity and refrigerant type, not just mounting dimensions—otherwise the appliance loses its cooling mode and runs in bursts. In our practice with Snaige, we more often replace the start relay and motor-compressor, less often the thermostat, and for each position we select a part with suitable parameters. An analog with the correct refrigerant and matching capacity maintains the same temperature in the compartments as the original unit, while a cheap "size-fit" one overloads the circuit. Before replacement, ask the technician about the refrigerant type and capacity—these two parameters matter more than the brand, and they determine the compatible part.
For older Lithuanian Snaige fridges, we source compatible replacement parts, and the technician tells you right away which parts are needed during the visit. The older the model, the more often a compatible component with suitable specs is used instead of a rare part — and this is discussed with the owner before work begins. Around the city, a technician arrives within 60 minutes, so inspection and parts selection don't stretch over multiple visits. We service Snaige refrigerators in Almaty and discuss upfront what will be replaced so the owner understands the scope of work. In my opinion, for models over ten years old, it's smarter to discuss a compatible compressor right away rather than hunting for an original: a rare part lengthens the search, while a compatible one with the right specs performs just as well.
We start with free diagnostics, agree on the work based on the results, and then the technician performs it at your home or in the service center — depending on what exactly has failed.
Diagnostics are free, and the technician quotes the price after them — before work begins, the owner knows what will be done and why. He comes to your home anywhere in the city, checks the compressor, thermostat, control module, and sensors, measures the temperature in the compartments, and listens to the unit under load. Based on the inspection, he explains which component has failed, shows it, and offers options — replace the part, restore the circuit, or fix it with adjustments. Approval happens before disassembly: you confirm the list of operations and hear the cost upfront, not after the fact. During diagnostics, we don't just name the breakdown — we show which component failed and why, so your decision is informed and you don't pay for unnecessary work.
Repair at home or in the service center. We fix most Snaige breakdowns at your home, while circuit or compressor work is done in the service center. On site, the technician replaces the thermostat, sensors, control module, door seal, fixes refrigerant leaks at accessible points, and adjusts the electronics. This approach saves the owner time and eliminates the risks of transporting the appliance. If soldering the circuit, replacing the compressor, or pressure testing is required, the work is done in the service center, which has the necessary equipment and conditions for precise assembly. The decision on location is made after diagnostics: if the component can be replaced on site without compromising quality, the refrigerator is not transported. Practical tip: clear access to the back wall in advance and don't unplug the power until the technician arrives. The technician repairs Snaige refrigerators in Almaty with attention to this brand's specifics, and we agree on the work location with the owner after diagnostics.
| What we repair | How we test | What you get after repair |
|---|---|---|
| Compressor | start-up and circuit pressure | 1-year warranty on labor and parts |
| Thermostat | control circuit test | 1-year warranty on labor and parts |
| Control module | power and sensor check | 1-year warranty on labor and parts |
| Door seal | perimeter airtightness test | 1-year warranty on labor and parts |
Repairing an old Snaige is often cheaper than buying a new one, but there are scenarios when you shouldn't wait. Here's how to decide on components and how to call a technician to your home.
Repairing a Snaige refrigerator is often more cost-effective than buying a new one if the fault is isolated and doesn't affect the entire cooling circuit. The compressor is the key cooling component of a Snaige refrigerator: its service life determines whether the appliance maintains the temperature in the main and freezer compartments. In older models, this unit is designed for long continuous operation, so replacing the thermostat, start relay, or door seal restores the appliance to a normal cycle without losing cold. The cooling circuit is another matter: if the evaporator casing is punctured and refrigerant leaks in two places at once, the scope of work increases, and then cost-effectiveness is assessed. In my opinion, the owner should first find out the exact list of faults rather than decide based on a single symptom. The decision depends on how many components have failed simultaneously: replacing just the compressor or thermostat is justified, but a whole series of circuit faults is a reason to discuss replacing the appliance.
If a Snaige refrigerator gives you an electric shock or the compressor clicks and won't start, it's best to stop using it until the technician arrives. An electric shock from the body indicates an insulation or grounding problem, and you shouldn't plug the appliance in until the cause is fixed. A click when trying to start usually means the start relay isn't holding the winding or the compressor itself is seized — repeated attempts to turn it on heat the winding and cause it to fail completely. The electronic control module after power surges may show an error on the display and fail to send a defrost command, causing the back wall to ice up and food in the main compartment to spoil. During inspection, the technician checks the thermostat, compressor, control module, and door seal to avoid replacing one component while the cause lies in another. If there's a smell of burning wiring or a melted connector, unplug the refrigerator and don't try to start it again.
We accept requests and send a technician within 60 minutes anywhere in the city, and you can pay via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies. Tech Service is the direct provider: our own technician comes to your home, not an intermediary, so they inspect the fault right away and give you the scope of work on the spot. Diagnostics are free, the warranty is 1 year on labor and parts, and our technicians have 4 to 20 years of experience. We take requests by phone, and the technician comes to your home anywhere in the city. To help the technician arrive prepared, please provide the Snaige model and the error code if it's shown on the display — this speeds up diagnostics. This way, you can understand in advance which components will need checking and avoid wasting time on a second visit.
The observations gathered on faults, error codes, and repair procedures boil down to a few practical conclusions that help the owner decide on repair.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












