experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free, and the final price is quoted after the check.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and the parts that cause them. The technician identifies the exact cause after free diagnostics.
discharged battery, button, board
from8 500 ₸
contacts, power supply, battery
from4 500 ₸
wheel, sensor, motor
from4 000 ₸
filter, brushes, turbine
from9 500 ₸
sensor, clog, board
from5 500 ₸
sensors, base contacts
from5 500 ₸
tank, valve
from8 500 ₸
bearing, brushes
from3 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–3 business daystime
from 5 000 ₸cost

BeforeAfter5 steps

From request to inspection — five steps, with free diagnostics.
Describe the symptom and your robot vacuum model so the technician brings the right tools.
Confirm the model and symptom by phone so the technician brings the right tools and parts.
The technician approves the estimate and offers a choice of an original part or a compatible equivalent.
Work begins after approval; you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
Accept the work by signing the report and check the warranty terms for the completed repair.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Leave a request — a technician will arrive within 60 minutes anywhere in the city. Diagnostics are free: the cause and price are quoted before work begins. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Богдан С.Order No. ZK-2026/606 · 10 April 2026
oursСмотрел, у кого есть запчасти на такую модель. Не люблю сервисы, но этот запомнил. Основная жалоба — не заряжаеться. Дамир М перезвонил, когда всё было готово. Цену обсудили до начала, сюрпризов не было. Диагностику сделали бесплатно, хотя я был готов платить. Нагрев в норме, посторонних звуков нет)
Даулет С.Order No. TS-5092 · 1 February 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Техника работала годами, а тут — не заряжается. Из деталей — датчики. Проверил дома — всё на месте, ничего не забыли
Гульнара Б.Order No. TS-2311-510 · 31 July 2023
oursОтдельно скажу про мастера: Рустем Т — спокойный, без лишней суеты. Работает даже тише, чем до поломки.
Сергей Р.Order No. 95215 · 26 July 2022
oursЦена имела значение, но и гарантия тоже. Основная жалоба — не заряжается. Сделали и забыл про проблему
Арман К.Order No. ZK-2020/924 · 4 May 2020
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Заметил случайно: не заряжаеться. Рустем Т принял, посмотрел и сразу сказал, что делать. Мастер показал, что меняет: датчики. Уже полгода — ни одного сбоя)
Богдан С.Order No. TS-2012-709 · 3 March 2020
oursЦена имела значение, но и гарантия тоже. Ремонт робота-пылесоса — вот с этим и пришёл. Основная жалоба — не заряжается. Уже полгода — ни одного сбоя!!
Диана М.Order No. TS-1909 · 22 February 2020
oursПосле выходных обнаружил: не поднимается. Проверили при мне, показали, что всё держит.
Ильяс Н.Order No. ZK-6684 · 7 January 2018
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Повод для визита: кружит на месте. Починили и дали гарантию на месяц.
Роман З.Order No. TS-1611-509 · 22 August 2016
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Диагностика робота-пылесоса — с этого всё началось. Жалоба простая: не заряжается. Рустем Т взялся за то, от чего другие отказались. Ни копейки сверху, как и обещали. Нужна была замена: аккумулятор. Заявку приняли по телефону, перезвонили через десять минут. Буду советовать знакомым. Проверили при мне, показали, что всё держит
Тимур А.Order No. 168684 · 10 July 2016
oursХотел сначала вызвать мастера на дом, потом передумал. Обидно было, техника не старая совсем. С чем пришёл: не поднимается. Мастер посмотрел, сказал, что возьмётся, и взялся. Поменяли: датчики. Уже полгода — ни одного сбоя.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionPress the power button on the body and hold it for a couple of seconds until the indicator lights up. If it stays silent, place it on the dock and let it charge — it won't start when the battery is deeply discharged.
A full restart is done by turning it off with the power button and then turning it back on; some models have a separate reset button under the cover. If the robot behaves the same way after that, the cause is in the components — it needs diagnostics.
Each Polaris model has its own code table, so check the meaning in the manual for your specific robot. If the error comes back after a reset, it points to a specific component — lidar, brush, charging, or motor — and then you need a technician.
When the lidar fails, the robot loses orientation completely: it spins in place, doesn't build a map, and can't find the dock. A single sensor glitch causes local errors, and behavior usually changes after a restart. The exact diagnosis depends on the model and is made after disassembly.
Yes, the battery is replaced separately from other components if diagnostics confirm it's worn out. Before replacement, the technician also checks the charging circuit and the board so the new battery doesn't drain for the same reason.
Yes, Tech Service accepts such robots, but the technician first checks whether any fasteners or cables were lost during the DIY disassembly. Diagnostics are free, and completed work and parts come with a 1-year warranty.
Tech Service repairs Polaris robot vacuums in Almaty: a technician comes to your home within 60 minutes, or the repair is done at the service center. Diagnostics are free, we give a 1-year warranty on labor and parts, and the technician quotes the price after diagnostics. We work with Polaris robots after the manufacturer's warranty expires.
Most Polaris service requests involve power, navigation, and drive issues. Here's what's behind each symptom and what the technician checks.
Most often, a Polaris unit won't turn on because of a discharged or worn-out battery, or due to contacts on the base, so we start diagnostics with the power chain. We check the voltage at the battery terminals, the condition of the spring contacts on the station and the power button, and test the control board for short circuits. The navigation module and motors are left aside for now—until power is confirmed, testing them is pointless. Restoring Polaris robot vacuums in Almaty in this scenario begins with free diagnostics: the technician measures capacity under load and compares it with the rated value. If after a full charge the device holds noticeably less charge than usual, the issue isn't the button but the battery capacity—replacing it restores runtime rather than masking the problem. Polaris robot vacuum repair in Almaty in such cases usually comes down to replacing the battery or restoring the contacts.
When a Polaris unit can't find its base or spins in place, we check the lidar, obstacle sensors, and wheel drives—these are the three components responsible for navigation. The lidar acts as a laser rangefinder: it scans the room and sends data to build a map, so a failure in it immediately breaks the route. Infrared sensors on the bumper handle obstacle avoidance and prevent falls down stairs, while wheel encoders tell the controller how many revolutions each drive has made. If one wheel spins slower, the robot veers off course and loses the base. A dirty lidar produces the same symptoms as a broken one, so before replacing a part, the technician first cleans and calibrates the optics—sometimes no intervention is needed at all.
If a Polaris unit doesn't spin the brush or picks up dust poorly, we distinguish between a clog and motor wear—this determines whether the assembly needs replacement. Hair and threads wound around the main brush overload the spin motor, so regular cleaning extends the drive's life better than any service intervention. Worn bristles on the side brushes stop sweeping debris from corners, and the robot passes by even though the motor is fine. Weak suction with a clean filter points to impeller wear or a clogged air duct, which is checked by disassembly. A clogged filter reduces airflow, and dust stays on the floor even with a working motor. At Tech Service, the technician disassembles the housing, checks the winding and bearings, then decides whether to clean the assembly or replace it.
An error code on the Polaris robot's screen narrows down the fault but doesn't replace diagnostics. Here's how to read the signal, which error groups are most common, and when a reset no longer helps.
An error code on a Polaris robot points to the component where protection tripped, and a simple reset clears the signal but doesn't fix the cause. The combination on the display consists of the component number and the type of trip: power, navigation, brush drive, or station. The control board logs the event when a sensor goes out of range and stops the cleaning cycle. A restart zeroes the counter and reloads the firmware—if the component is physically fine, the unit will continue working without a signal. With a power failure or a motor binding, the error returns within minutes. If the same code appears after a reset and restart, the problem is in the hardware, not the firmware—further resets only waste time while the component continues to operate in emergency mode.
| Signal group | What it indicates | What the technician checks |
|---|---|---|
| Power and charging | battery, base contacts | charging circuit and battery capacity |
| Navigation | lidar, obstacle sensors | cleanliness and calibration of optics |
| Brush drive | rotation motor, clog | brush and motor winding |
| Station | charging base, contacts | power and robot docking |
If the code on your Polaris robot reappears after a reset or is accompanied by a stop mid-clean, we recommend not delaying diagnostics — a recurring signal points to a faulty component. The control board and sensors are linked by calibration: the lidar builds the map, obstacle sensors adjust the route, and a failure in one unit affects the others. From a single code on the display, it's hard to tell a dead battery from a sticking brush motor — you need a load test, which is done on a disassembled device. At Tech Service, diagnostics are free: the technician checks the charging circuit, optics, and drives and identifies the cause. DIY disassembly to "check the board" often throws off sensor calibration, so it's better to stop at a reset and hand the device to a technician — after a failed intervention, finding the cause takes longer.
A Polaris robot can be repaired at home or at the workshop. Below is the step-by-step process from request to return of the device and a list of what to prepare to speed up diagnostics.
We repair Polaris robot vacuums both at home and at the workshop — a specialist arrives within 60 minutes anywhere in the city, and complex cases are easier to handle at the workshop. On-site, they check power, base contacts, brush and sensor operation, and if necessary replace accessible components right at the client's place. At the workshop, full disassembly, board and navigation module testing, and intermittent fault detection under load are available. Diagnostics are free in both formats, so you choose the format based on the symptom, not the budget. If the robot wanders around the apartment and won't hold a charge, an on-site specialist often resolves the issue on the spot, while navigation with case disassembly is easier to check at the workshop. Polaris robot vacuum repair in Almaty is available in the format that suits you — at home or at the workshop. In my opinion, it's best to start with an on-site visit: some breakdowns are ruled out in one visit, and the device stays in your apartment.
Before diagnosing a Polaris robot, it's worth emptying the bin, removing hair from the brush, and charging the battery — this helps the technician see the real picture faster. An empty bin and a clean brush allow checking suction and rotation without false failures, while a charged battery shows actual runtime instead of residual charge. It's better to rinse and dry the filter in advance — a clogged membrane mimics weak airflow and skews the initial assessment. It helps to recall what preceded the malfunction: a fall from height, a puddle on the floor, a brush replacement, or a firmware update — these details narrow down the search. If the robot has recently been in contact with water, don't turn it on to test — moisture on the board under voltage turns a minor repair into a module replacement. Also, keep the dock and power adapter on hand so the entire set can be checked, not just the body.
Service terms matter as much as the work itself: they determine what restoring the robot will cost and what happens if the fault returns. Here's what you need to know about the warranty, diagnostics, and how the decision to intervene is made.
We provide a 1-year warranty on labor and parts — this covers both battery replacement and restoring the navigation of a Polaris robot. The battery is a consumable that loses capacity with charging cycles, and its replacement falls under the same warranty scheme as work on the board or drives. The navigation module and obstacle sensors are also covered for a year: if the robot loses its base or moves in a curve again after the intervention, we'll look into it. A warranty on a part means that if the same unit fails again, the service center is responsible for the labor and the part, not the owner at their own expense. In my view, this is the point most often checked before handing over the device — and rightly so: a verbal warranty and a written one give different results on a repeat visit.
Diagnostics are free with us, and the technician quotes the price after them — when it's clear which unit of the Polaris robot needs attention. Before inspection, it's impossible to give an honest estimate: the same error on the screen can mean a clogged filter, a dying brush motor, or a board failure. The technician checks suction, brush rotation, response to the base, and battery condition, then explains exactly what will be replaced. Comparing with buying a new robot only makes sense after diagnostics — sometimes just one part is replaced, not the whole device. In our practice, expensive interventions turned out to be needed less often than the owner expected: more often the issue is solved by replacing one component. So don't write off the device until a technician with the right experience has looked at it.
We accept Polaris robot vacuums for repair even after the manufacturer's warranty, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies — this removes the question of where to take the device once the factory warranty expires. An out-of-warranty robot often requires not one but two related repairs: for example, replacing the battery without checking the charging controller brings back the same fault within a few weeks. That's why the technician evaluates the entire chain of units at once, so you don't have to come back for the same breakdown. Within the city, a technician arrives in 60 minutes and comes to your home or picks up the device for service — Tech Service works as a direct contractor, with no middlemen between you and the technician. You can pay for labor and parts in any convenient way. This approach saves time: you don't pay twice for the same unit.
The owner can rule out some symptoms themselves, while others require a technician who knows Polaris robots specifically. Let's look at the boundary between these cases and where to take the device.
Tech Service is a direct provider with its own technicians, not an aggregator: your Polaris robot goes to the person who repairs it, with no middlemen. Our technicians have worked with this brand for 4 to 20 years and know how specific components behave — lidar, gyroscope, wheel motors, obstacle sensors. An aggregator takes the request and passes it to a contractor: the device moves between providers, and its service history gets lost along the way. With us, one person handles diagnostics and repair, so the cause of the breakdown isn't blurred in handoffs. A technician can come to your home within 60 minutes anywhere in the city, or you can have it repaired at the service center — you choose the format. In my view, for a robot with electronics and navigation, what matters isn't how fast the request is submitted, but that one technician sees the breakdown from start to finish.
We repair the charging base and self-cleaning station separately from the Polaris robot — the fault often lies in the station itself, not in the unit. Base contacts oxidize, springs lose their tension, and on self-cleaning stations the air supply channel gets clogged and the dust-shaking mechanism jams. The robot looks fine: it drives up, spins around the station, and leaves without charging. That's why we accept the base and station as standalone devices — their diagnostics don't require the robot itself. If the robot "doesn't see the base," the cause may be in the station's contacts, so it's worth bringing or showing both devices together: diagnostics take less time, the cause is found more accurately, and the technician quotes the price after free diagnostics.
Repairing a Polaris robot comes down to three questions: what exactly broke, where to fix it, and who's responsible for the result. Below is a short summary to help you decide without extra trips and waiting.
38brands
Polaris is one of the brands whose robot vacuums we service. The full list of brands with pages on the site is below.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












