Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Aeg Washing Machine Repair in Almaty

A technician will come and fix the problem on site. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Technician arrives within 60 minutes across the city
  • Free diagnostics at your home

Our own technicians4 to 20 years of experience

Ruslan Ts.Dilmurat S.DimaOraz

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
2ГИСЯours4,96 064 reviews
2GIS · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Aeg washing machine faults in Almaty

Below are typical symptoms and the parts most often checked first.

PricesPricesTECH SERVICE03

How much Aeg washing machine repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Aeg washing machine repair in Almaty

Motor hums, brushes worn out

1 visittime

from 3 000 ₸cost

Problem
The Aeg washing machine stopped turning the drum: the motor hummed and jerked, and a motor error appeared at the start of the wash.
What we did
The technician pulled out the machine, removed the back panel and the belt, took out the motor and replaced the worn carbon brushes with two new ones, then reassembled the machine.
Result
The drum rotates again; the technician checked operation on wash and spin.
I want the same
Aeg washing machine: motor hums, brushes worn out — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Aeg washing machine repair works at your home in Almaty

Five steps from request to checking the machine's operation.

  1. Requestsame day as request

    Describe the symptom and model — the technician will prepare for the visit.

  2. Preparing for the visitby phone

    The technician clarifies the model and symptom to bring the right tools.

  3. Approving the workbefore repair

    The technician records the scope of work in the order; ask about the part and when it will be installed.

  4. Repairafter approval

    Work begins after you approve the scope and price.

  5. Check and warrantyafter repair

    The machine is tested in operation, with a 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our Aeg washing machine repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a washing machine at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 05
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Aeg washing machine repair in Almaty

Choose a convenient visit time and contact method — the technician will confirm details and prepare for the visit.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE06

Reviews of Aeg washing machine repair in Almaty

Акбота Т.Order No. TS-2305-226 · 6 November 2023

ours

Цена имела значение, но и гарантия тоже. Симптом был очевидный: ошибка на дисплее. Внешне как новый, если не считать мелкой царапины!!

Repair: washing machine

Индира П.Order No. 2023-3911 · 14 June 2023

ours

С чем пришёл: течёт. Дильмурат С взялся за то, от чего другие отказались. Работает как раньше, придирок нет.

Repair: washing machine

Сергей Р.Order No. TS-2210-605 · 29 November 2022

ours

Друг посоветовал, у него похожая история была. Повод для визита: вибрация. Крутит ровно, без рывков

Repair: washing machine

Наталья С.Order No. 107334 · 4 July 2021

ours

Позвонил в три места, здесь единственые назвали цену сразу. Работает как раньше, придирок нет.

Repair: washing machine

Жасмин Р.Order No. ZK-2021/689 · 13 June 2021

ours

Рустем Т помог выбрать, без навязывания. Мастер сам перезвонил, когда появилась запчасть. Ребёнок уже проверил на прочность, держиться.

Repair: washing machine

Станислав К.Order No. TS-4180 · 28 January 2018

ours

Техника на гарантии уже не была, так что выбор был свободный. Руки чесались починить самому, хорошо, что не полез. Жалоба простая: течёт. Дильмурат С не стал навязывать дорогую запчасть, поставил нормальную. Деталь на замену — подшипник. Всё оформили по договору, с печатью. Смета совпала с итогом, что редкость. Хороший сервис, побольше бы таких. Сказать, что доволен — ничего не сказать.

Repair: washing machine

Елдос К.Order No. ZK-9793 · 17 June 2017

ours

Хотел сначала вызвать мастера на дом, потом передумал. Ремонт промышленной стиральной машины — вот с этим и пришёл. Основная жалоба — не греет воду. В списке работ — тэн. Сказали 17 500, а потом ещё и скидку сделали. Второй месяц — полёт нормальный

Repair: washing machine

Богдан С.Order No. 95121 · 11 December 2016

ours

Пробовал найти мастера в своём районе, но все были заняты. До последнего откладывал, но пришлось признать: не сушит. Поставили новую деталь: насос. Мастер сразу сказал, что к чему, без размытых формулировок. Проверили при мне, показали, что всё держит.

Repair: washing machine

Дмитрий Л.Order No. ZK-9878 · 29 October 2016

ours

Было важно, чтобы сделали до выходных — гости, то-сё. До последнего откладывал, но пришлось признать: не отжимает. Отдал 22 000, и это вместе с работой. Созвонились, договорились на удобное время, никто не тянул. В списке работ — модуль. Нагрев в норме, посторонних звуков нет.

Repair: washing machine

Ксения И.Order No. 80442 · 12 March 2016

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Первое, что заметил: не включаеться. Включил, проверил, работает.

Repair: washing machine
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Aeg washing machine repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Is it better to repair an AEG washing machine or buy a new one?

If the problem is with the pump, heating element, or bearing, repairing an AEG is usually more sensible than buying a new machine. Replacing the appliance makes sense when the tub is sealed and the drum or control board is damaged.

Which washing machine brands break down more often, and how does AEG differ in this regard?

Breakdown frequency depends more on operating conditions than on the brand: hard water, overloading, and infrequent filter cleaning speed up wear. With AEG, as with other brands, the pump, heating element, and bearing are usually the first to fail.

Is an AEG washing machine reliable?

AEG is considered a reliable brand, but any appliance eventually breaks down: most often the pump, heating element, and bearing fail. Timely repairs extend the machine's life.

What are the risks of repairing an AEG washing machine at home without diagnostics?

Without diagnostics, a technician might replace the wrong part, and the problem will return. In AEG machines, a faulty pump, heating element, and temperature sensor often produce similar symptoms, so the cause must be accurately identified first.

Can an AEG washing machine be fixed if it won't drain water without disassembling the pump?

Often yes: first, the drain filter is removed and rinsed, and the hose is checked for clogs and kinks. If the pump impeller doesn't spin freely, the unit is replaced entirely rather than repaired.

What should I do if the AEG washing machine won't fill with water?

First, check that the tap is open and there's no clog in the inlet hose filter. If water still doesn't flow, the cause is usually the inlet valve, and a technician will fix it after free diagnostics.

Repair guideArticleTECH SERVICE08

AEG Washing Machine Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs AEG washing machines in Almaty: our technician comes to your home or we fix the machine at our service center. Diagnostics are free, we arrive within 60 minutes anywhere in the city, and you get a 1-year warranty on labor and parts. Our technicians have 4 to 20 years of experience and know the error codes for this brand.

What an AEG Error Code Means and How to Read It

The code on the display is just a hint, not a verdict. Its meaning depends on the model, so a technician checks it against the table for your specific machine rather than interpreting it from memory.

AEG Drain and Water Fill Codes

On AEG, code E20 is related to draining water, while E18 or F18 (d02 on some models) means a drain problem; E17 or F17 means water isn't filling within the allotted time. Behind E20 are three components: the drain filter at the bottom front behind the service flap, the corrugated hose, and the drain pump. For E17 or F17, we check not only the inlet valve but also the tap with the mesh filter at the inlet—a clogged mesh causes the same error as a failed valve. If you need AEG washing machine repair in Almaty, these codes help immediately identify which component to check. The code's meaning depends on the model, so we verify it against the table for your machine rather than interpreting from memory—this way we find the cause on the first visit, not by trial and error.

How to Read the Code on Models Without a Display

On AEG models without a display, the code is shown by indicators—their flashing and combination correspond to the same error as the digits on a screen. You need to read not a single flash but a series: the number of flashes and pauses between them add up to the designation, and on some series the program selector position is added to it. The same rhythm on two different generations may point to different components, so the machine's series is confirmed from the nameplate on the door. The indicator decoding is checked against the table for the specific series, since identical flashing on different generations can mean different things. Take a photo of the flash rhythm on your phone before the technician arrives—decoding from a video is faster than from a verbal description.

Why the Same Code Reads Differently on Different Models

  • Generation-specific: on AEG, the error designation is tied to the series, so the same symbol on different generations points to different components.
  • Different parts under one index: on machines from different years, the same code can lead from the inlet valve to the control board.
  • The role of firmware: the control program determines which component the machine considers the culprit, and the interpretation changes from series to series.
  • Models without a screen: here the symbol is made up of flashes, and the rhythm differs between generations, so decoding without a table is unreliable.
  • Nameplate on the door: write down the model from it—using the number we immediately pull the right table and don't waste a visit on clarifications.

Why AEG Won't Drain, Fill, or Spin

Behind each symptom is a short chain of causes—from the most common and simple to the more serious. Let's look at three typical cases and summarize them in a checklist table.

Not Draining—From Filter to Pump

If your AEG won't drain water, the causes in order of frequency are: a clogged drain filter, a kinked or blocked hose, then the pump. The filter is at the bottom front behind the service flap—unscrew it and rinse out lint, coins, and small debris. Next, check the drain hose: kinks, flattening, clogs at the bend. The pump assembly is checked last, since debris and a clogged filter are its main cause of failure, and scale has nothing to do with impeller wear. A multimeter won't show a jammed pump—we check whether the impeller turns freely and only then conclude it needs replacement. AEG washing machine repair at home is convenient: the technician checks the drain components on site. Before inspection, unplug the machine and drain the water through the emergency hose, placing a towel underneath—the water may be hot.

Not Filling with Water and Not Spinning—Where to Look for the Cause

If an AEG isn't filling with water, check the tap, the mesh filter on the inlet hose, and the inlet valve. If it's not spinning, the cause could be an unbalanced load, a drainage issue, the drive belt, or the motor. The mesh filter at the hose inlet gets clogged with rust and sand from the water supply, and the valve stops opening when the coil wears out. The spin cycle fails when laundry bunches up on one side of the drum—then the machine reduces speed, usually 800–1600 rpm depending on the model. The drive belt slips off or stretches, and on brushed motors, brush wear adds to the problem. The drain pump doesn't work during water intake, so "not filling" and "not draining" are almost never related to the same component. Start by checking the tap and mesh filter—it takes two minutes and doesn't require disassembly.

Symptom, likely causes, and what the technician checks

SymptomCommon causeLess commonWhat we check
Not drainingDrain filterHose, pumpImpeller and hose flow
Not fillingTap, hose mesh filterInlet valveWater supply and valve
Not spinningUnbalanced loadDrain, belt, motorBelt and drain
Leaking from belowHoses, pumpHosesConnections and pump
Not heatingHeating elementTemperature sensorHeating and sensor

Leaking from below and not heating water—what the technician checks

Leaks and lack of heating are two symptoms where it's easy to misdiagnose the component and take apart more than necessary. Let's look at which components the technician examines and what signs help narrow down the causes.

Where water leaks from and when it's the door seal

  • Hoses: connect the tub to the pump and valve; over time they crack or slip off the clamp—water runs down under the machine.
  • Drain pump: worn seals or debris in the housing let water through, and a puddle forms under the appliance.
  • Hoses: inlet and drain hoses rub against the body or get pinched at the wall—a leak appears at the connection.
  • Door seal: the rubber gasket leaks at the front by the door, water runs down the front panel, not under the machine.
  • Detergent dispenser and drawer: if clogged, powder doesn't rinse out, water overflows and runs down the front panel.
  • What the technician checks: where the puddle is—under the body or by the door—and at what point in the cycle water appears.

Not heating water—heating element or temperature sensor

If an AEG isn't heating water, the cause is usually the heating element or the temperature sensor, and the technician distinguishes them by checking the heating. The owner notices the symptom by washing in cold water: powder doesn't dissolve, laundry comes out with streaks, and the program takes longer. The heating element gets covered in scale and burns out, and the temperature sensor may give false readings—the machine "thinks" the water is already hot and doesn't turn on the heating element. The check is simple: the technician measures heating at different stages of the cycle and reads the sensor to avoid replacing a working part. In such cases, AEG washing machine repair starts with checking the heating, not disassembling the tub. On most brands, the heating element can be replaced without removing the tub, so this job doesn't turn into a full teardown—access to the component opens up after removing the front panel.

Stops mid-cycle—why the control board isn't the main cause

If an AEG stops mid-cycle, it's usually the drain, an imbalance, or the motor—the control board is just one possible cause, and not the main one. The machine stops with water in the drum, flashes indicators, or simply freezes halfway through the program, and the owner's first suspicion is the electronics. Meanwhile, a clogged filter, a kinked drain hose, or a blocked pump produce exactly the same picture: water won't drain, the cycle won't continue. An imbalance—clothes bunched up or the machine tilting—makes the unit skip the spin. A motor with worn brushes in commutator motors can also cause a stop. We rule out drainage and imbalance first, because they give the same symptom but are simpler and faster to fix than electronics—and only then do we check the board.

How to drain water from an AEG before the technician arrives

If the machine has stopped with water in the drum, you can drain it yourself—carefully, without disassembling the pump and without risking your floor.

Safe emergency draining procedure

  • Unplug from power: pull the plug from the socket before any contact with water or the filter—this is the first thing to do.
  • Towel on the floor: place a cloth or towel under the service flap, because the water may be hot after a high-temperature wash.
  • Emergency hose: open the service flap at the bottom front, pull out the thin drain hose, remove the cap, and drain the water into a basin or bucket.
  • Drain filter: unscrew it only after the water from the hose has stopped flowing, and keep a container nearby for the remainder.
  • No disassembly: don't unscrew the filter while the machine is running and don't take the pump apart—that's an easy way to cause a flood or damage the impeller.

What to do after draining and what to tell the technician

After draining the water, leave the machine alone and tell the technician at what stage it stopped and what code it showed. Provide the model and the number from the plate on the door—we use them to prepare the right code table in advance, so the on-site diagnosis goes faster. The exact symptom and code save time, because the technician arrives with a ready inspection plan for your series. At Tech Service, diagnostics are free, and the technician reaches your address within 60 minutes anywhere in the city. If the water has drained but the machine hums or won't turn the drum—don't start a new wash before inspection: repeating the cycle on a faulty unit makes the breakdown worse. Note exactly how the machine behaved before it stopped: did it fill with water, was there a click, were the indicators on. Such a timeline helps pinpoint the cause faster. If you don't feel confident draining the water yourself, our technician can repair your AEG washing machine at home after inspection.

What the technician does on-site and what happens at the service center

Some work is done right at your home, some requires the service center. Let's look at where the line is and why the machine's design determines it.

What is fixed on-site and what is taken to the service center

On-site, we replace the drain pump, heating element, belt, and hoses; bearing replacement requires the service center, as it's the longest job involving removal of the tank and drum. The drain pump is at the bottom, the heating element on most brands can be removed without taking out the tank, the belt goes on the pulley from the outside, and hoses are accessible after removing the side panel. The bearing is pressed into the tank, and to reach it, the tank and drum are removed from the housing entirely. The design of the assembly determines the line, not the technician's convenience: if the tank is non-separable, the bearing isn't replaced separately—the tank is replaced as a unit or the job isn't feasible. In my opinion, it's more honest to tell the owner this before disassembly than to take the machine to the service center just to confirm the diagnosis.

Brushes, impeller, and non-separable tank—three common questions

  • Brush wear: only occurs in commutator motors—inverter motors have no brushes, so this diagnosis doesn't apply to them.
  • Pump impeller: check whether it spins freely; a multimeter won't show a jammed pump, and there's no need to disassemble the pump on-site.
  • Non-separable tank: the bearing inside isn't replaced separately—the assembly comes as a unit, and this changes the scope of work and the owner's decision.
  • Why it matters: the motor and tank type determine whether the visit fits in one trip or requires the service center.

Where AEG components are located and what that means for the work

ComponentLocationAt home or in the shop
Drain filterBottom front, behind the coverAt home
Drain pumpAt the bottomAt home
Heating elementFront, behind the front panelAt home
Tub bearingInside the tubIn the shop, if the tub is serviceable

Warranty, diagnostics, and service terms

Before you call a technician, it helps to know who will arrive, how long the visit will take, and what you'll get when the work is done. Here are our terms on those three points.

A direct technician, not a middleman

  • Our own technician: the person who comes to you is our employee, not a contractor who got the job passed on.
  • One point of responsibility: the same technician does the work and selects the part, so there's no argument over who's accountable for the result.
  • Brand knowledge: our field technician works with AEG appliances and knows where components are located in different series.
  • A clear chain: the decision on how to fix the machine is made on site, without checking with third parties.
  • Parts made to order: the part is chosen by the model code from the rating plate, not a "looks similar in the photo" guess.
  • No blurred responsibility: the service center itself is responsible for the work and the part, not a chain of contractors.

Free diagnostics and a 60-minute visit

Diagnostics are free, and a technician arrives within 60 minutes anywhere in the city, then agrees on the cost of work. The visit covers the whole city — routes are planned so your request isn't delayed. On site, the technician checks the machine based on the symptoms: listens to the fill and drain, checks whether the pump impeller spins freely, inspects the filter and hoses, and if needed removes the front panel to access the heating element. The price is quoted after the free diagnostics: you decide with the cause already known, not guessing over the phone. In my view, that's the main difference of a proper visit — first the cause, then the talk about work. If it can't be fixed on site, you'll be told exactly what work will be needed in the shop.

1-year warranty on labor and parts

We give a 1-year warranty on labor and parts, and this also covers service after the manufacturer's warranty expires. The term applies both to on-site visits and to work in the shop: whether the pump was replaced at home or the machine was taken in, the term is the same. If the same component has a problem again within a year, you won't be caught in a blame game between the parts supplier and the technician: our service center covers both the part and the labor. In my experience, this is the last thing owners ask about, but it's worth asking before work starts. Ask exactly which part or component the warranty covers — the specific part or the whole assembly.

Aeg washing machine repair what really matters

We've gathered the key things an AEG owner should focus on before calling a technician and during the work — from reading the code to the actual steps at home.

  • The code depends on the model. The same code on different AEG series points to different components, so check the meaning against the table for your machine.
  • Causes go from simple to complex. For drain problems, first check the filter and hose, then the pump and whether the impeller spins freely.
  • Some work is done at home. The drain assembly, heating element, and belt are replaced on site, while the bearing in a non-serviceable tub isn't replaced separately — that's the longest job.
  • Emergency draining — carefully. Water is drained through the hose behind the service cover at the bottom front, with the machine unplugged, and without taking apart the plumbing.
  • Diagnostics set the direction. The more accurately you describe the symptom and code, the faster the technician finds the cause and quotes the cost of work.

85brands

Besides Aeg, we repair other washing machine brands in Almaty

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE09

Besides Aeg washing machine repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Aeg washing machine repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISЯYandex Maps
Send a review with photos on WhatsApp