Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Candy Washing Machine Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Ruslan Ts.Dilmurat S.DimaOraz

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Candy washing machine faults in Almaty

The symptom tells you which part to check first. The technician identifies the exact cause after a free diagnostic.

PricesPricesTECH SERVICE03

How much Candy washing machine repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Candy washing machine repair in Almaty

Motor hums, brushes worn out

1 visittime

from 3 000 ₸cost

Problem
The drum on the Candy washing machine stopped spinning: the motor hummed and jerked, and a motor error appeared at the start of the wash.
What we did
The technician pulled out the machine, removed the back panel and the belt, took out the motor, replaced the worn carbon brushes with two new ones, and reassembled the machine.
Result
The drum spins again; the technician checked operation on wash and spin. 1-year warranty on labor and parts.
I want the same
Aeg washing machine: motor hums, brushes worn out — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Candy washing machine repair works at your home in Almaty

Five steps from your request to checking the machine after repair.

  1. Requestsame day

    Describe the symptom and the machine model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    The technician comes anywhere in the city and inspects the machine on site.

  3. Diagnosticsfree

    The technician finds the cause of the breakdown and quotes the cost of work and parts.

  4. Approvalafter inspection

    You approve the scope of work and the part, then the technician starts the repair.

  5. Preparing the spacebefore repair

    Check with the technician about access to water and electricity and prepare the space for the in-home repair.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our Candy washing machine repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a washing machine at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 05
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Candy washing machine repair in Almaty

Describe the symptom and the machine model when booking a convenient time — the technician will bring the right tools and parts in advance. 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE06

Reviews of Candy washing machine repair in Almaty

Сабина Г.Order No. 564334 · 23 September 2026

ours

Хотел сначала вызвать мастера на дом, потом передумал. Жалоба простая: течёт. Вернули в тот же день, всё функционирует

Repair: washing machine

Айгуль К.Order No. ZK-2025/223 · 11 September 2025

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Уже не верил, что это можно починить. Повод для визита: не сушит. Дима помог выбрать, без навязывания. Могли бы взять больше, но взяли по-божески. Заодно поменяли: тэн. Tech-service посоветовали в чате дома, спасибо им. Второй месяц — полёт нормальный!!

Repair: washing machine

Ксения И.Order No. 819682 · 12 May 2025

ours

Смотрел, у кого есть запчасти на такую модель. Позвонили заранее, предупредили, что задержиться на полчаса. Пользуюсь ежедневно, вопросов нет!!

Repair: washing machine

Аружан К.Order No. 2025-2417 · 24 January 2025

ours

Долго откладывал ремонт, потом всё-таки собрался. Жалоба простая: не сушит. Второй месяц — полёт нормальный.

Repair: washing machine

Ержан А.Order No. TS-1927 · 3 May 2024

ours

С чем пришёл: течёт. Ораз принял, посмотрел и сразу сказал, что делать. Проверили на всех режимах, всё чётко!!

Repair: washing machine

Наталья С.Order No. 929586 · 27 December 2023

ours

Повод для визита: ошибка на дисплее. Рустем Т снял деталь, показал износ, вопросов не осталось. Нагрев в норме, постороних звуков нет.

Repair: washing machine

Гаухар Н.Order No. 788281 · 9 October 2021

ours

Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Оставил заявку на ремонт промышленной стиральной машины. Повод для визита: вибрация. Починили и дали гарантию на месяц.

Repair: washing machine

Мирас С.Order No. TS-6433 · 12 March 2021

ours

Алдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды. Бағасын алдын ала келістік, соңында өзгерген жоқ. Келесіде де осында келемін.

Repair: washing machine

Алмас Д.Order No. ZK-2018/189 · 30 September 2018

ours

Симптом был очевидный: не сушит. Рустем Т перезвонил, когда всё было готово. Гудит ровно, не греется, всё как надо.

Repair: washing machine

Мирас С.Order No. TS-6042 · 15 January 2017

ours

Отдельно спосибо мастеру — Рустем Т, терпения ему хватило. Запчасть была в наличии, доплачивать не пришлось. Проверили при мне, показали, что всё держит

Repair: washing machine
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Candy washing machine repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What is the average lifespan of a Candy washing machine?

A Candy washing machine typically lasts several years, but the exact lifespan depends on the model and care. Hard water, how often you run loads, and regular filter cleaning all affect durability.

How do you reset the electronics on a Candy washing machine?

To reset the electronics, unplug the machine from the power outlet for fifteen to twenty minutes, then plug it back in and start the cycle again. If it keeps freezing, the control board may be the cause — a technician can check it.

Do you repair compact Candy Aquamatic washing machines?

Yes, we repair compact Candy Aquamatic models both at your home and at our service center. Because of their tight layout, the pump, hoses, and drum bearing tend to fail more often.

Can I clean the drain filter on my Candy myself to avoid calling a technician?

Yes, you can clean the filter at the bottom front behind the service flap yourself. First unplug the machine and drain the water through the emergency drain hose, placing a towel underneath: the water may be hot.

How can I tell if my Candy washing machine has a bad bearing rather than a bad belt?

A bad bearing usually makes a humming noise that gets louder during the spin cycle, while a bad belt causes slipping and weak drum rotation. A technician makes the final call after taking it apart: on a sealed tub, the bearing isn't replaced separately.

Does the service provide a warranty for Candy washing machine repair at home?

Yes, there is a 1-year warranty on labor and parts. A technician arrives in Almaty within 60 minutes, and diagnostics before repair are free.

Repair guideArticleTECH SERVICE08

Candy Washing Machine Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Candy washing machines in Almaty: our technician arrives at your home within 60 minutes or we fix the machine at our service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and the technician gives you the price after inspection. We work with the Aquamatic, Smart, GrandO Vita, and RapidO lines.

Why Candy Won't Drain and What the Error Codes Mean

Most Candy service calls start with one symptom: the machine stops and won't finish the cycle. Let's break down what the display signal means and what causes stand behind each symptom.

What the Error Code on the Candy Display Means

A signal on the Candy display is a hint, not a verdict: E18 or F18 (d02 on some models) points to a drain problem, E17 or F17 means water isn't filling within the allotted time. On models without a screen, the indicator panel blinks in the same sequence as the digital combination, and the control module stores the decoding. Our technicians have memorized the "signal — component" pairing over years of working with this brand, but they still open the table for the specific generation. The meaning depends on the model and generation, so the specialist checks it against the table for your machine, and on models without a display, the indicators show the hint. What's more, the same combination on different series can point to related components — that's why you need to verify, not guess. If you're looking for Candy washing machine repair in Almaty, the search starts with an accurate decoding of the code for your model.

Symptom → Cause from Simple to Complex

  • Won't drain: first we check the drain filter at the bottom front behind the service flap, then the hose, then the pump.
  • Won't fill: tap, mesh on the inlet hose, inlet valve — from simple to complex.
  • Won't spin: load imbalance, drain problems, drive belt, or motor.
  • Leaks from below: hoses, drain assembly, tubes; the door seal leaks at the front.
  • Won't heat water: heating element or temperature sensor — we check both components in sequence.

Table of Codes and Common Causes by Symptom

SymptomCode (depends on model)Common causes
Won't drainE18 or F18 (d02 on some models)Filter, hose, pump
Won't fill with waterE17 or F17Tap, mesh, valve
Won't heat waterHeating codeHeating element or temperature sensor
Leaks from belowNo codeHoses, pump, tubes
Won't spinSpin codeImbalance, drain, belt, motor

How to Tell a Clog from a Component Failure and What to Check First

Before calling a technician, it helps to understand where the component is and how it behaves when it fails. This helps you describe the problem more accurately and avoid paying for unnecessary work.

Drain Filter and Pump — Where to Look and How to Check

The drain filter on a Candy is at the bottom front behind the service flap; if water still won't drain after cleaning it, we check the pump. This component is responsible for pumping water out at every stage of the program, and a clog gives the same symptom as a failed part — the machine sits with water in the drum. Debris like coins, lint, and small objects get into the impeller through the filter and gradually stop it from spinning. A multimeter won't show a jammed pump — the technician checks whether the impeller spins freely, and the cause of pump failures is more often debris than wear. When servicing a Candy washing machine at home, we first remove and rinse the filter, then check the impeller by hand, and only after that decide if the pump needs replacing. If you're looking for Candy washing machine repair, the technician on site will figure out whether it's a clog or a component failure.

Heating Element, Temperature Sensor, and Inlet Valve

When a Candy isn't heating water, we check the heating element and the temperature sensor; if there's a problem with filling, we check the tap, the inlet valve mesh, and the valve itself. The heating element and sensor work as a pair, so the technician first checks the sensor readings and then tests the heating element for a break. The inlet valve sits at the water inlet and often suffers from scale and rust: the mesh gets clogged, pressure drops, and the program stops at the first stage. On most brands, the heating element can be replaced without removing the tank, so this job is usually faster than the owner expects. Before calling a technician, check that the tap is open and the inlet hose isn't kinked—these are the most common causes of water fill problems. If the pressure is fine but no water comes in, the technician removes the valve and checks the mesh and coils.

Belt, motor, and bearing—what's noisy and not spinning

  • Drive belt: the drum doesn't spin but the motor hums—the belt may have slipped off or stretched; the technician removes the back panel and checks the tension.
  • Motor and brushes: brush wear only happens on brushed motors; inverter motors don't have brushes, so diagnostics start with identifying the motor type.
  • Drum bearing: noise and humming during the spin cycle indicate bearing wear, but it's only replaced separately on a split tank; on a sealed tank, the assembly is replaced as a unit.
  • Imbalance and draining: the machine won't spin but does turn during the wash—the cause is more often leftover water or an uneven load, not the motor.

What the owner should do before the technician arrives

While the technician is on the way, a few simple steps will reduce the risk and make the service easier. The main thing is not to disassemble the machine yourself or unscrew the filter while it's running.

Safe emergency water drain

  • Unplug it: pull the plug from the socket before any work with water—this prevents electric shock from accidental contact.
  • Prepare the area: place a towel under the service flap at the bottom front so water doesn't spread across the floor or get under nearby appliances.
  • Drain through the emergency hose: remove the flap, pull out the thin tube, point it into a basin or bucket, and open the cap—water will flow out by gravity.
  • Don't touch the drain assembly while it's running: don't unscrew the cap when the container is full and don't take the pump apart—the liquid may be hot, and without experience it's easy to strip the threads.

When it's worth repairing an old Candy

Restoration makes sense if the fault is local—pump, heating element, belt—and the body and tank are intact; if the bearing in a sealed tank needs replacing, the decision depends on the machine's condition. A technician performs Candy washing machine repair at home after an inspection, and the results make it clear whether restoration is worth undertaking. On older Candy models, the drain pump most often fails due to debris and a clogged filter, as well as the heating element due to scale. The drive belt and inlet valve are replaced quickly and don't require removing the tank. The drum bearing is a separate story: on a sealed tank it isn't replaced separately, and removing the assembly with the drum takes the most time. Bearing replacement is the longest job because it requires removing the tank and drum, so the technician discusses its feasibility with the owner separately.

Which Candy lines we repair and how they differ

Candy produces several lines with different layouts and electronics. The series determines which components fail first and how the machine reports a fault.

Compact Aquamatic and mainstream Smart

We repair compact Aquamatic models with their tight layout in mind, while in the mainstream CS series we more often deal with electronics and program freezes. In a body about 40 cm deep, components sit close together, so the pump and hoses are accessed through the top cover rather than from below. Full-size models and Smart Touch have more room, but the control module is linked to the indicator panel and sensors—hence intermittent faults. If such a machine freezes mid-cycle, it's not always the board: first we rule out drain issues and drum imbalance, and only then check the electronic unit. Candy washing machine repair at our service center takes into account the specifics of each line. Our technician comes to your home anywhere in the city, diagnostics are free, and the warranty is 1 year on labor and parts. In our experience, compact models save time on access to components, while full-size ones often require removing the panel and testing the wiring harnesses.

Comparing lines by typical failures

LineLayoutCommon issues
AquamaticCompactDrain, leaks, pump
Smart (CS)Full-sizeElectronics, freezes
GrandO VitaWith displayOn-screen codes, heating element
RapidOWith displayDrain, spin
Top-load and slimSpecialImbalance, belt

How Candy washing machine repair at home works

The process is designed so the owner doesn't have to take the machine anywhere. A specialist arrives, runs diagnostics, and agrees on the work before repair begins.

Technician visit and on-site diagnostics

A Tech Service technician comes to your home anywhere in the city and starts with free diagnostics. On site, they check how the machine fills with water, whether it holds water in the tub, if the drum spins, and whether the water drains—these components show where the fault is. Diagnostics happen right at the owner's place: the technician checks how the appliance behaves and what the indicators show. If the fault requires workshop conditions, the machine is repaired at the service center. On site, they identify the Candy model from the rating plate on the body—this affects both the error code meaning and the choice of part. In our experience, on compact Aquamatic models the model code plate is accessed before disassembly to immediately verify the error code. Candy washing machine repair in Almaty at home follows exactly this sequence: first inspection, then approval.

Approving work and selecting parts

The specialist quotes the price after free diagnostics, before work begins, and agrees on it with the owner. The discussion includes a list of what needs to be replaced and an explanation of why the component failed: a clogged filter, a worn belt, a burnt-out heating element, or a jammed pump. No one starts disassembly until the owner confirms the work—this rule applies both on site and at the service center. The part is selected by part number or model code—this avoids mistakes with incompatible parts, especially in series with different electronics. In my view, verifying by model code saves the most time: the part is chosen by number, not by visual similarity. That's why the technician checks the part number against the rating plate on the body before ordering the component and doesn't rely on appearance.

Repair at the service center and post-repair testing

  • In-house repair: if the fault requires workshop conditions, the machine is repaired at the service center and then tested before return.
  • Component replacement: the specialist replaces the pump, heating element, temperature sensor, or belt and checks that the parts sit properly in place.
  • Cycle run: testing is a separate stage; the technician runs a program and makes sure drain, water fill, and spin work as they should.
  • Home check: when the machine is reinstalled at the owner's place, the cycle is started once more to confirm the result.

Warranty, diagnostics, and how we quote the price

For an owner, it's not just about getting the appliance fixed but also about the terms. Let's break down the warranty, diagnostics, and payment process with no unpleasant surprises.

1-year warranty on labor and parts

Tech Service provides a 1-year warranty on labor and parts. This commitment applies equally whether a technician comes to your home or the appliance is serviced at our center — you don't have to choose between convenience and protection. The twelve-month term covers both the work performed and the installed component, whether it's a drain pump, heating element, or inlet valve. The warranty covers both the labor and the installed part — this matters because some failures don't show up right after the repair but after several wash cycles, when the owner is no longer expecting trouble. As a Candy washing machine service center, we set the warranty terms in a single commitment for both on-site visits and in-shop service.

Free diagnostics and payment process

  • Inspection at no cost: diagnostics are free — the technician arrives, checks the appliance, and identifies the cause without charging for the inspection itself.
  • Price after inspection: the technician quotes the cost of labor and parts after diagnostics, once it's clear which component has failed.
  • Payment methods: we accept cash, bank transfer, and card payments — you choose what's convenient.
  • Approval before work begins: the scope of work and final amount are discussed in advance, before repairs start.

Direct service provider, no middlemen

Tech Service is a direct service provider: our own technician comes to your home or the appliance is serviced at our center, bypassing aggregators and middlemen. The party who actually performed the work is responsible for the result and the warranty. Our technicians have 4 to 20 years of experience, so diagnosing by symptom and error code takes less time than randomly checking components. We offer city-wide visits at a time that suits you. Knowledge of typical Candy failures allows the specialist to immediately check the drain, inlet, or heating rather than disassembling the entire case; this approach saves your time and reduces the risk of damaging working connections during unnecessary disassembly. In our experience, the longest searches happen when the symptom points to one component but the fault lies in a neighboring one — knowing the series saves that step.

Candy washing machine repair facts and benefits

We've gathered the key things a Candy appliance owner should keep in mind: how to read your machine's signals, where to look for the cause before calling a technician, and what to expect from the repair.

  • An error code is a hint, not a verdict: its meaning depends on the model, so check it against the table for your specific machine rather than interpreting from memory.
  • The symptom determines the check order: for "won't drain," go through filter — hose — pump; for "won't fill," check the tap, mesh filter, and valve.
  • Emergency drain before the technician arrives: unplug the machine, drain water through the hose behind the service flap at the bottom front, placing a towel down and remembering it may be hot.
  • Product lines differ in design: Aquamatic, Smart, GrandO Vita, and RapidO are built differently, so their weak points don't match.
  • Home service starts with free diagnostics: the price is quoted before work begins, and the warranty on labor and parts is 1 year.

85brands

Besides Candy, we repair other washing machine brands in Almaty

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE09

Besides Candy washing machine repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Candy washing machine repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp