Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Dauscher Washing Machine Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • 4 to 20 years of experience
  • Kaspi QR, Kaspi Red, card, cash and bank transfer

Our own technicians4 to 20 years of experience

Ruslan Ts.Dilmurat S.DimaOraz

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Dauscher washing machine faults in Almaty

Below are frequent symptoms and likely causes. The technician identifies the exact cause after free diagnostics.

PricesPricesTECH SERVICE03

How much Dauscher washing machine repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Dauscher washing machine repair in Almaty

Motor hums, brushes worn out

1 visittime

from 3 000 ₸cost

Problem
The drum of the Dauscher washing machine stopped spinning: the motor hummed and jerked, and a motor error appeared at the start of the wash.
What we did
The technician pulled out the machine, removed the back panel and belt, took out the motor, replaced the worn carbon brushes with two new ones, and reassembled the machine.
Result
The drum spins again; the technician checked operation during washing and spinning. 1-year warranty on labor and parts.
I want the same
Aeg washing machine: motor hums, brushes worn out — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Dauscher washing machine repair works at your home in Almaty

From request to performance check — five steps, free diagnostics.

  1. Requestsame day as call

    Describe the symptom and model — the technician will prepare for the visit.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Diagnosticson site

    The technician shows the faulty part and explains possible repair options.

  4. Repairafter approval

    Work is performed after agreeing on the scope and price.

  5. Check and warrantyafter repair

    The technician runs a test cycle with the owner and shows that the symptom is gone.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our Dauscher washing machine repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a washing machine at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 05
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Dauscher washing machine repair in Almaty

Have the machine model, error code on the display, and a description of the symptom ready for the call — the technician will bring the necessary parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE06

Reviews of Dauscher washing machine repair in Almaty

Сабина Г.Order No. ZK-2025/724 · 12 December 2025

ours

Дима не стал навязывать дорогую запчасть, поставил нормальную. Tech-service посоветовали в чате дома, спасибо им. Нагрев в норме, посторонних звуков нет.

Repair: washing machine

Данияр С.Order No. 2025-3853 · 7 August 2025

ours

Пробовал найти мастера в своём районе, но все были заняты. Симптом был очевидный: не отжимает. Включил, проверил, работает

Repair: washing machine

Ольга М.Order No. 2024-4744 · 24 September 2024

ours

Поломка застала перед командировкой, тянуть было нельзя. Сказать, что доволен — ничего не сказать.

Repair: washing machine

Сергей Р.Order No. TS-2210-605 · 29 November 2022

ours

Друг посоветовал, у него похожая история была. Повод для визита: вибрация. Крутит ровно, без рывков

Repair: washing machine

Акбота Т.Order No. TS-3098 · 5 April 2022

ours

Хотел сначала вызвать мастера на дом, потом передумал. Записался на диагностику стирально-сушильной машины. С чем пришёл: не сушит. В списке работ — тэн. Приняли, выдали квитанцию, всё по-человечески. Ребёнок уже проверил на прочность, держится.

Repair: washing machine

Наталья С.Order No. 107334 · 4 July 2021

ours

Позвонил в три места, здесь единственые назвали цену сразу. Работает как раньше, придирок нет.

Repair: washing machine

Артём К.Order No. TS-2115 · 17 June 2020

ours

Нужен был счёт и чек, у нас техника на балансе организации. Больше всего напрягало: не сушит. Сказать, что доволен — ничего не сказать

Repair: washing machine

Малик Т.Order No. ZK-2017/348 · 18 September 2017

ours

Күтуге уақытым жоқ еді, сол күні алып кеттім. Тексеру кезінде бәрін өзі көрсетті. Бағасын алдын ала келістік, соңында өзгерген жоқ. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Кепілдік берді, бұл мен үшін маңызды. Бір күнде жөндеп берді, кешіктірмеді. Кәсіби мамандар, рақмет.

Repair: washing machine

Елдос К.Order No. ZK-9793 · 17 June 2017

ours

Хотел сначала вызвать мастера на дом, потом передумал. Ремонт промышленной стиральной машины — вот с этим и пришёл. Основная жалоба — не греет воду. В списке работ — тэн. Сказали 17 500, а потом ещё и скидку сделали. Второй месяц — полёт нормальный

Repair: washing machine

Богдан С.Order No. 95121 · 11 December 2016

ours

Пробовал найти мастера в своём районе, но все были заняты. До последнего откладывал, но пришлось признать: не сушит. Поставили новую деталь: насос. Мастер сразу сказал, что к чему, без размытых формулировок. Проверили при мне, показали, что всё держит.

Repair: washing machine
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Dauscher washing machine repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What should I do if my Dauscher washing machine breaks down under warranty?

Contact the service center listed on the warranty card or the seller — warranty repairs are free. Taking the machine apart yourself may void the warranty, so it's best to wait for the technician.

Why isn't my Dauscher washing machine draining water, and what can I check myself?

Most often it's a clogged drain filter or a kinked hose, less often the pump itself. Unplug the machine, put down a towel, and drain the water through the emergency hose behind the service flap at the bottom front: the water may be hot.

What does the drain error code on my Dauscher washing machine display mean?

On some Dauscher models, the drain code points to a water drainage problem. The exact meaning depends on the model, so the technician checks the code against the table for your machine.

My Dauscher machine isn't filling with water — what should I check first?

First check that the tap is open and the mesh filter on the inlet hose isn't clogged. If those are fine, the inlet valve is likely faulty and needs to be replaced.

Why isn't my Dauscher washing machine spinning the laundry and hums during the spin cycle?

Most often the cause is an unbalanced load or worn bearing, less often the belt or motor. If the hum gets louder during the spin, the technician will check the bearing and shock absorbers so you don't put off the repair.

Water is leaking from the bottom of my Dauscher washing machine — what should I do?

Unplug the machine and don't use it until the technician arrives. Leaks from the bottom are usually caused by hoses, the pump, or connections, and at the front by the door seal; the technician will identify the faulty part on site.

Repair guideArticleTECH SERVICE08

Dauscher washing machine repair in Almaty by a direct contractor

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Dauscher washing machines in Almaty: our technician arrives at your home within 60 minutes anywhere in the city or takes the machine to our service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. The technician gives you the price after diagnostics.

Why a Dauscher washing machine stops working and what it means

With Dauscher, as with any machine that has direct drive and electronic controls, a symptom almost always points to two or three components. Let's go through the most common complaints in order—from simple to complex.

The machine won't drain: what to check first

If your Dauscher won't drain, we start with three components in order: the drain filter, the drain hose, and the drain pump. The drain filter is at the bottom front behind the service flap, and a clog is immediately visible. Next we check the hose: kinks, clogs, or a blockage where it connects to the drain. Only then do we check the pump—whether the impeller spins freely. Pump failures are almost always caused by debris—coins, lint, small objects—and a clogged filter; scale isn't related to pump wear, so descaling won't restore drainage. If your own checks don't solve it, a technician repairs Dauscher washing machines in Almaty after free diagnostics. Unplug the machine, drain the water through the emergency drain hose behind the service flap at the bottom front, and put a towel down first: the water can be hot. Don't unscrew the filter while the machine is running.

Not filling with water, not spinning, leaking from the bottom, not heating

  • Not filling with water: the tap, the mesh filter on the inlet valve, and the valve itself—three points to check one by one.
  • Not spinning or humming: an unbalanced load, a drain problem, the drive belt, or the motor.
  • Leaking from the bottom: hoses, pump, connections; a door seal leak shows at the front, right by the door.
  • Not heating water: the heating element or the temperature sensor; on most brands the heating element can be replaced without removing the tub.
  • Stopping mid-cycle: most often drainage, imbalance, or the motor; the control board is one possible cause, not the main one.
  • Humming but not turning the drum: the drive belt, shock absorbers, or the motor—confirmed during inspection.

Why the machine stops mid-wash

If your Dauscher fills with water but won't wash or stops mid-cycle, we check drainage, imbalance, and the motor—in that order. Drainage comes first: the machine won't move to the next step until it pumps out the water, so a clogged filter or blocked hose causes a stop without an obvious code on the display. Imbalance is second: a load bunched up on one side or worn shock absorbers make the drum bang against the sides. The motor is third: brushed motors wear out their brushes, inverter motors don't have any. The control module is rarely the culprit for this complaint, so there's no point replacing the board "just in case" before diagnostics. Our technician compares the machine's behavior with the table for your specific model—this rules out unnecessary replacements.

Dauscher error codes and how a technician reads them

A signal on the display is a hint, not a verdict. The same code on different models points to different components, so a specialist checks it against the table for your specific machine.

What E18 and F18 mean and why the code depends on the model

  • E18 or F18: on some models d02 indicates difficult water drainage—the water doesn't leave the tub within the allotted time.
  • E17 or F17: water isn't filling within the allotted time; check the tap, the mesh filter on the inlet hose, and the inlet valve.
  • Model dependence: across different series the same code is assigned to different components; there's no single table for all machines of the brand.
  • What we do: we check the signal against the table for your series before touching the drain pump or inlet valve.
  • Why the check matters: without it, it's easy to replace a working pump while the real cause remains—and the water still won't drain.

How to read the code if your machine has no display

On models without a display, the signal is shown by indicators — their combination is the same code, just in a different form. Flashing or steady lights on specific lamps follow the same logic as the digital code, and the table for each series maps them. The control module stores this firmware logic, so the set of indicators tells you which group of components to check: drain, fill, heating, or motor. Recording the combination saves diagnostic time — the technician immediately knows where to look and doesn't have to take the whole machine apart, just checks the specific component. The technician quotes the cost of Dauscher washing machine repair after free diagnostics. If the lights flash in an unclear sequence, take a photo before turning off the machine: that way the combination is preserved, the technician sees it without distortion, and you don't have to describe the flashing from memory.

Drain codes from other brands for comparison

BrandDrain codeWhat it means
DauscherE18 or F18 (d02 on some models)difficulty draining water
Bosch, SiemensF18difficulty draining water
Samsung5E (SE, E2)difficulty draining water
ElectroluxE20difficulty draining water
Indesit, HotpointF05difficulty draining water

Machine components and why they are replaced this way

Dauscher repair is not about 'branded parts' but about how access to components is designed. That determines whether a part is replaced in half an hour or the machine is half disassembled.

Heating element, pump, bearing — what is quick and what takes time

ComponentAccessWork specifics
Heating elementwithout removing the tank on most brandsreplaced locally
Drain pumpfrom belowcheck that the impeller spins freely
Drum bearingtank and drum removalonly with a split tank
Door sealfront at the doorleak is visible immediately

Why brushes wear out only on some motors

Brush wear only happens on brushed motors; inverter motors have no brushes. In a machine with an inverter motor, looking for 'worn brushes' is pointless: they are simply not installed, and the reason the drum won't spin is checked in the drive belt, drain, and the motor itself. A brushed motor has brushes, and over time they wear down — then the drum loses speed or doesn't turn at all. On inverter models, a spin failure is more often due to an unbalanced load or a clogged drain path, not the motor. So the universal forum advice 'change the brushes' on an inverter machine only wastes time. The technician first determines the motor type by design, and that determines which components to check first. The technician quotes the cost of Dauscher washing machine repair after free diagnostics — it depends on which component has failed.

How a part for Dauscher is selected

We select parts for Dauscher by part number or model code, not "from a photo on the internet." There's no universal consumable "for all washing machines" here: different series have different mounting dimensions and connectors, so a part that looks similar may not fit. The number is stamped on the part itself, and the body code is on the nameplate — compatibility is checked against these. Selecting by such a code eliminates returns and repeat visits, which means less waiting for the owner. Before diagnostics, it's worth photographing the nameplate with the model code — this speeds up selection, reduces the risk of bringing the wrong part, and saves the technician's time on the visit. Checking by number and code takes minutes, while a compatibility mistake means taking the machine apart again and renegotiating timelines.

How Dauscher washing machine repair works and what to do before the technician arrives

Service for Dauscher appliances follows one procedure — from free diagnostics to warranty — and the owner can prepare for the specialist's visit in advance.

What to do before the technician arrives if the machine won't drain

  • Unplug it: pull the plug from the socket before touching liquid and components — this is the first thing any specialist asks you to do.
  • Put down a towel: place a cloth under the service flap at the bottom front so the contents of the drum don't spill onto the floor.
  • Drain the remainder: open the emergency drain hose behind the flap and let the liquid flow into a basin or bucket.
  • Don't touch the pump: taking apart the pump and unscrewing the drain filter "on the fly" isn't a good idea — that's how leaks onto the floor most often happen.
  • Check the temperature: after washing, the remainder may be hot, so place the container carefully, without sudden movements.

The technician's workflow from diagnostics to repair

  • Free diagnostics: the specialist finds the cause before any work, and only then is the scope discussed.
  • Code check: the error value is checked against the table for your model — code E18 or F18 on d02 reads differently than on older series.
  • Component check: they go from simple causes to complex ones — filter, hose, pump, then motor and board.
  • Part selection: the part is selected by number or model code so the component isn't replaced again.
  • Repair: at home or at the service center if the work can't be done on site.

How fast the technician arrives if the machine is leaking

For a leak, the specialist arrives within 60 minutes anywhere in the city. Leaks from below are most often caused by hoses and pipes, while the door seal leaks at the front — from the wet strip on the floor, our technician understands which area to look for the cause even before disassembly. While he's on the way, shut off the water and unplug the machine: this limits damage to the floor and furniture, and he'll pinpoint the leak on site. We send technicians with 4 to 20 years of experience to such calls — with a leak, what matters isn't the speed of disassembly but how quickly the cause is found. Diagnostics are free, so no unnecessary work will be assigned for your machine, and the 1-year warranty on labor and parts applies after the visit as well.

Warranty, payment, and repair terms

Our terms are the same for any breakdown: the warranty, payment procedure, and accepted payment methods don't depend on which component was replaced or how long the work took.

How much Dauscher washing machine repair costs

  • Diagnostics: the technician arrives, finds the cause, and only then quotes the price — diagnostics are free.
  • Affects the total: the component being replaced (heating element, pump, bearing), the part number in the catalog, and whether your model has a split drum.
  • Doesn't affect it: the address within the city and the payment method — the total is the same whether you pay by card or cash.
  • The cost is discussed before work begins: you agree to the amount and scope in advance, not find out after the fact.
  • Simple cause: if after inspection it turns out a clogged filter is to blame, the technician states the scope of work and cost after free diagnostics.

What the 1-year warranty covers

  • Labor: 1 year on the repair performed — if the unit we worked on fails again, we'll fix it under warranty.
  • Part: 1 year on the installed part — the warranty on labor and parts applies under the service terms.
  • Record: which unit was replaced and by what number the part was selected — this will be useful for future visits.
  • Timing: 1-year warranty on labor and parts, so it's important for the technician to know what was replaced last time.
  • Model note: the technician checks the code meaning and part compatibility against the table for your machine, not from memory.

How to pay for the service

We accept Kaspi QR, Kaspi Red, card, cash or bank transfer, and the payment method doesn't affect the scope of work or the warranty. The technician tells you how much Dauscher washing machine repair costs after free diagnostics: before that, you only see a list of possible causes, not the price. Then you choose a convenient payment option and agree on it with the specialist on site. The cost of Dauscher washing machines is discussed before work begins, so you can think about payment in advance and not decide in a hurry while the machine is disassembled. This approach protects you from surprises at the end: if diagnostics show a simple cause, the technician quotes the price for exactly that work.

Dauscher repair in Almaty by a direct provider

Our own specialist travels around the city, not an aggregator's courier — the same person does the diagnostics and the work, and then stands behind the result.

How a direct provider differs from an aggregator

  • Our own specialist: Tech Service is a direct provider — our employee comes to your home or we take the machine to the service center, with no middlemen.
  • One responsible person: our technician does the diagnostics and the work, not an outside contractor.
  • 1-year warranty: on labor and parts, given by the one who performed the work, not an outside contractor.
  • No blurred responsibility: Tech Service is a direct provider, and the 1-year warranty on labor and parts is given by the one who performed the work.
  • Transparent diagnostics: done on site, with the cause explained before work begins.

Dauscher repair at home

We most often repair Dauscher washing machines in Almaty at home — the specialist arrives within 60 minutes anywhere in the city. On site, they check the drain, water fill, and heating, match the error code with the table for your model, and name the cause. At home, it's convenient to replace the drain pump, heating element, door seal, and drive belt: these units can be removed without taking out the tub, and on most brands the heating element is replaced through the front panel. If the tub with the bearing needs to be disassembled, we'll suggest bringing it to the service center so we don't take the machine apart in your apartment. Before the visit, unplug the machine and drain the water through the emergency hose behind the service flap at the bottom front, placing a towel underneath — the water may be hot.

Should you repair a Dauscher or buy a new one

  • Local breakdown: pump, heating element, seal, or belt — repairs usually make sense because the tub and drum are intact.
  • Sealed tub: if the bearing is worn and the tub is sealed, the bearing isn't replaced separately — it's more honest to discuss replacing the machine.
  • Serviceable tub: with a worn bearing and an intact drum, repairs are possible, but this is the longest job — it involves removing the tub and drum.
  • Motor: on brushed motors, the brushes are replaced; inverter motors have no brushes — there, the board and winding are checked.
  • Control board: it's replaced or restored after checking the other units, because the board is one of the causes of a stop, not the main one.

When Dauscher washing machine repair makes sense

Here's a quick summary to help you get oriented before calling a technician, understand how a fault is traced, and avoid unnecessary moves with your appliance.

  • The symptom points to specific parts: won't drain, won't fill, or won't heat — there are almost always 2–3 candidates, and they're checked from the simplest cause to the most complex.
  • The error code is a clue: whether it's E18 or F18 depends on the model, so it's checked against the table for that specific machine rather than guessed at.
  • The scope of work varies: on most brands the heating element is replaced without removing the drum, while the bearing is only replaced if the drum is serviceable.
  • Before the technician arrives: if the machine won't drain, unplug it and drain the water through the emergency hose behind the service flap — don't take the pump apart.
  • Cost and warranty: the price is discussed after free diagnostics, and the warranty on labor and parts is counted separately.

85brands

Besides Dauscher, we repair other washing machine brands in Almaty

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE09

Besides Dauscher washing machine repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Dauscher washing machine repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp