Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Haier Washing Machine Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Ruslan Ts.Dilmurat S.DimaOraz

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Haier washing machine faults in Almaty

The symptom hints at which component to check first. The exact cause is identified by the technician during free diagnostics.

PricesPricesTECH SERVICE03

How much Haier washing machine repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Haier washing machine repair in Almaty

Won't drain water, pump hums

1 visittime

from 4,500 ₸cost

Problem
The Haier washing machine stopped draining water and at the end of the wash cycle stood with water in it; the drain pump hummed but did not pump.
What we did
The technician drained the water through the drain filter, removed the old drain pump with a worn, loose impeller, installed a new one, and connected the hose and wires.
Result
Draining and spinning were tested — the machine works; a 1-year warranty is given for the work and parts.
I want the same
Ardo washing machine: won't drain water, pump hums — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Haier washing machine repair works at your home in Almaty

From request to performance check — five clear steps.

  1. Requestsame day

    Describe the symptom and the machine model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Diagnosticson site

    The technician arrives with tools for the described symptom and identifies the cause of the failure.

  4. Approvalbefore work

    The technician quotes the cost of labor and parts, and the owner confirms the repair.

  5. Report and checkafter repair

    The technician shows the completed work and checks the wash, rinse, and spin cycles.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our Haier washing machine repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a washing machine at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 05
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Haier washing machine repair in Almaty

Choose a convenient way to get in touch and a visit time — the technician will confirm the details and come.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE06

Reviews of Haier washing machine repair in Almaty

Сабина Г.Order No. ZK-2025/724 · 12 December 2025

ours

Дима не стал навязывать дорогую запчасть, поставил нормальную. Tech-service посоветовали в чате дома, спасибо им. Нагрев в норме, посторонних звуков нет.

Repair: washing machine

Данияр С.Order No. 2025-3853 · 7 August 2025

ours

Пробовал найти мастера в своём районе, но все были заняты. Симптом был очевидный: не отжимает. Включил, проверил, работает

Repair: washing machine

Ольга М.Order No. 2024-4744 · 24 September 2024

ours

Поломка застала перед командировкой, тянуть было нельзя. Сказать, что доволен — ничего не сказать.

Repair: washing machine

Сергей Р.Order No. TS-2210-605 · 29 November 2022

ours

Друг посоветовал, у него похожая история была. Повод для визита: вибрация. Крутит ровно, без рывков

Repair: washing machine

Вероника П.Order No. TS-2205-922 · 11 October 2022

ours

Мастер үйге келіп, орнында тексерді. Бір күнде жөндеп берді, кешіктірмеді. Бағасын алдын ала келістік, соңында өзгерген жоқ. Ескі бөлшекті қайтарып берді, әдетте олай жасамайды. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Алдын ала айтқан уақыттан ерте бітірді. Жөндеуге кепілдік бар, сол сенімді.

Repair: washing machine

Акбота Т.Order No. TS-3098 · 5 April 2022

ours

Хотел сначала вызвать мастера на дом, потом передумал. Записался на диагностику стирально-сушильной машины. С чем пришёл: не сушит. В списке работ — тэн. Приняли, выдали квитанцию, всё по-человечески. Ребёнок уже проверил на прочность, держится.

Repair: washing machine

Николай Ч.Order No. 75801 · 9 October 2021

ours

Отдельно спасибо мастеру — Рустем Т, терпения ему хватило. Проверил дома — всё на месте, ничего не забыли.

Repair: washing machine

Артём К.Order No. TS-2115 · 17 June 2020

ours

Нужен был счёт и чек, у нас техника на балансе организации. Больше всего напрягало: не сушит. Сказать, что доволен — ничего не сказать

Repair: washing machine

Сабина Г.Order No. ZK-7682 · 16 July 2019

ours

Проблема — не отжимает. Рустем Т взялся за то, от чего другие отказались. Работает как раньше, придирок нет.

Repair: washing machine

Малик Т.Order No. ZK-2017/348 · 18 September 2017

ours

Күтуге уақытым жоқ еді, сол күні алып кеттім. Тексеру кезінде бәрін өзі көрсетті. Бағасын алдын ала келістік, соңында өзгерген жоқ. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Кепілдік берді, бұл мен үшін маңызды. Бір күнде жөндеп берді, кешіктірмеді. Кәсіби мамандар, рақмет.

Repair: washing machine
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Haier washing machine repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What problems can Haier washing machines have?

Most often, Haier owners run into drain and water fill issues, spin failures, leaks from underneath, and no heating. There can also be noise and vibration during the spin cycle, as well as stopping mid-cycle — the technician pinpoints the exact cause during diagnostics.

Why does a Haier washing machine leak?

A leak from underneath is usually caused by a loose or cracked hose, a worn door seal, or a faulty pump. The technician will check the connections and seals to find the exact spot and fix the cause.

How do you take apart a Haier washing machine?

Disassembly starts with removing the top cover and control panel, then the front panel is taken off to reach the tub, heating element, and pump. On sealed tubs, the bearing isn't replaced separately, so the technician first checks the design for the specific model.

Can the bearing be replaced separately if a Haier has a sealed tub?

If the tub is sealed, the bearing isn't replaced separately — usually the entire tub with the drum needs to be replaced. On models with a split tub, the bearing can be replaced, but it's one of the longest jobs.

Haier has an inverter motor — does it have brushes, and what wears out instead?

Inverter motors don't have brushes, so there's nothing to wear out. Over time, the drum bearings and the electronic control module need attention, but diagnostics will show the exact component.

What should I do if a Haier washing machine stops mid-cycle and doesn't respond to buttons?

Unplug the machine from the power outlet, drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel down first: the water may be hot. Don't restart the wash and call a technician — the cause could be in the drain, an imbalance, or the motor.

Repair guideArticleTECH SERVICE08

Haier Washing Machine Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Haier washing machines in Almaty with technicians who have 4 to 20 years of experience. Diagnostics are free, a technician arrives within 60 minutes anywhere in the city, and repairs can be done at your home or at our service center. We provide a 1-year warranty on labor and parts.

Why Your Haier Washing Machine Won't Drain and Other Common Breakdowns

Haier machines tend to fail in a few typical ways. Our technician starts with the simplest cause and works toward the more complex ones—checking the filter, hose, and valve before touching the pump or motor, rather than replacing parts at random.

Machine Won't Drain—What We Check in Order

When a Haier won't drain, we go from simple to complex: first the drain filter at the bottom front behind the service flap, then the drain hose, and only then the drain pump. We unscrew the filter, remove coins, lint, and small objects, and check that the pipe is clear. We inspect the hose for kinks and clogs, especially if the machine sits flush against the wall. A multimeter won't show a jammed pump—the technician checks whether the impeller spins freely and listens for humming during draining. Most often it's debris, not scale, that stops the impeller, so regular filter cleaning extends the life of the parts. We start Haier washing machine repair in Almaty with this sequence—it eliminates half of our calls before disassembly and saves the owner waiting time. This order reduces the risk of unnecessary teardown and helps find the cause faster. Tip for owners: clean the filter proactively, before a drain error appears.

Not Filling, Not Heating, Not Spinning—Three Different Components

If a Haier won't fill, we check the tap, the inlet filter screen, and the inlet valve; if it won't heat, the heating element or temperature sensor; if it won't spin, load imbalance, draining, the drive belt, or the motor. We rinse the inlet filter screen of rust and sand and test the valve for activation. On most brands, the heating element can be replaced without removing the tub, while bearing replacement is the longest job because the tub and drum must be removed. That's why the technician first rules out simple causes: clogs, kinks, or a mis-set program. Servicing a Haier machine with a "not heating" symptom often ends with replacing the heater or temperature sensor, not the control board. Our experience shows that a precise sequence of checks saves the owner time and unnecessary disassembly. First, unplug the machine and shut off the water, then inspect the hose and filter, and only after that move on to the components. This order reduces the risk of damaging working parts.

Leaking, Knocking, Door Won't Open—What It Means

A leak from the bottom usually comes from a pipe, the pump, or a hose, while a leak at the front door points to the door seal; knocking and jumping during spin are often linked to load imbalance or shipping bolts, and a door that won't open is a lock (door interlock) issue. We inspect pipes and hoses for cracks and loose clamps, and the seal for tears and wear; a loose clamp is best tightened right away, otherwise the leak will return after the first wash, and a torn seal will put water on the floor. Shipping bolts left in after installation cause strong vibration from the first run. Haier spin speeds are typically 800–1600 rpm depending on the model—the higher the speed, the more noticeable the vibration when the load is unbalanced, so level installation and removed bolts matter more than you'd think. Before calling a technician, check that the bolts at the back have been removed—it's the most common cause of knocking in a new machine.

What Haier Error Codes Mean and Why One Code Can Mean Different Things

The signal on the display is a hint, not a verdict. The interpretation depends on the model, so the technician checks it against the reference for that specific machine, not a generic guide, to avoid replacing a working part and wasting time on unnecessary diagnostics.

Drain and Fill Codes—E18, F18, E17, F17

E18 or F18 (d02 on some models) means a drain problem, while E17 or F17 means water isn't filling within the allotted time. The drain signal points to three components: the filter at the bottom front, the corrugated hose, and the drain pump — they are checked in order, from a simple clog to the impeller. The fill signal points to the supply tap, the mesh in the inlet hose, and the inlet valve. If the signal repeats, Haier washing machine repair starts with checking these components in order; a clog in the filter and hose can often be cleared without disassembling the body, and the pump impeller is checked for free movement. On models without a display, the same error is shown by a combination of indicators rather than digits. The same code on different Haier generations can point to different components, so the interpretation is always checked against the reference for your model, not a generic online guide.

Why the same code means different things on different generations

Haier error codes depend on the generation and series — on some models the signal is shown by indicators rather than a display, so we check it against the reference for the specific machine instead of interpreting from memory. The HW, I-Pro Series 5, and I-Pro Series 7 series differ in control panel and sensor set, and the same combination of symbols leads to different components. On machines without a screen, the technician first reads the combination of flashing lights and then matches it to the series list. In Tech Service practice, such verification often changes the direction of the search: what the owner took for a pump failure turns out to be a clogged filter. If indicators are flashing on the panel, that is also a signal — it must be read by the combination of lights, and the technician clarifies the interpretation by model, not by the panel's appearance. Therefore, before diagnostics, note the series and generation so you don't confuse codes or replace parts at random.

Is it dangerous to continue washing when an error occurs

If there is a drain or water fill error, it's better not to continue washing — the machine will remain with water in the drum, and repeated starts won't fix the cause. Water in the drum puts pressure on the hoses and door seal, and the pump shouldn't run during water fill, so each new cycle just repeats the same stop. If water doesn't drain, don't unscrew the filter while it's running and don't disassemble the pump — first unplug the machine, drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath. The water may be hot. After that, call a technician to check the pump impeller and filter. The same signal on different Haier generations can point to different components, so the interpretation is always checked against the reference for your model, not a generic online guide.

How Haier components are arranged and how a technician reaches them

Haier's layout determines how quickly a technician can reach a component: this affects both the scope of work and what can actually be replaced on a specific model. Therefore, before the visit, clarify the disassembly procedure and stock the necessary parts.

Where the heating element, pump, and drain filter are located

On Haier, the heating element is at the front and is removed through the front panel, the drain pump is at the bottom, and the drain filter is at the bottom front behind the service flap. This layout is found on the HW and I-Pro Series 5 and 7, so the heater can be reached without removing the tank. The drain assembly is separate and is replaced as a standalone part, not as a unit with the tank. We select the part by part number or model code, not by eye — this way the part matches your series without a second visit. If you need a Haier washing machine service center, the technician comes to your home and works with the same access to components as in the workshop. In my opinion, this difference in access often explains why two machines with the same symptom require different amounts of work: on one, the impeller is reached behind the service panel, on the other, you have to go deeper.

Inverter motor and brushes — what wears out

Brush wear only happens in brushed motors — inverter motors have no brushes, so if you hear humming or the machine stops, the cause lies elsewhere. An inverter machine has no brush assembly as a part, and offering to replace it makes no sense: there's nothing to replace, and trying to "change the brushes" only delays the real repair and can make the fault worse. Humming during the spin cycle is usually linked to the drum bearing, while stopping mid-cycle points to drainage, imbalance, or the control board. A brushed motor does have brushes, and their wear causes sparking and loss of power. If a technician mentions "brushes" for an inverter machine, that's a reason to clarify the diagnosis: these motors wear out bearings and electronics, not the brush assembly. A practical tip — ask for the specific component and symptom, not a vague phrase, so you don't pay for unnecessary work.

Split and sealed tubs — what can be replaced

Tub typeWhat can be replacedScope of work
SplitDrum bearing, sealRemoval of tub and drum
SealedHeating element, pump, filter, hosesNo bearing replacement
Both typesHeater, drain assemblyFrom the front or bottom

What you can do yourself before the technician arrives

Before the technician arrives, you can reduce the risk of flooding and damage by shutting off the water and unplugging the machine. However, some actions are best left to a professional to avoid making things worse and increasing repair costs.

How to safely drain water from the tub

  • Unplug the machine: pull the plug from the socket before touching hoses or the front bottom cover to avoid the risk of electric shock when in contact with water.
  • Lay down a towel: water from the tub can be hot, so spread a cloth around the machine and keep a second container nearby as a backup.
  • Locate the emergency drain hose: it's behind the service flap at the bottom front, next to the drain filter; check that the end of the hose isn't kinked.
  • Drain the water into a basin: remove the cap from the hose and direct the flow into the container, holding the end with your hand, and put the cap back as soon as the basin is full.
  • Replace the cap: close the hose and the flap so that any remaining water doesn't spill onto the floor when the machine is tilted and damage the surface.

When it's better not to restart the machine

If the machine leaks from the bottom or stops with water in the tub, restarting won't fix the cause and may add more water to the floor. A leak from the bottom is often caused by a hose, drain pump, or pipe, while a leak at the front door is usually the door seal. The location of the leak can already narrow down the causes while the technician is on the way. If the machine stops mid-cycle with water in the tub, take it as a sign not to start another wash: the drain didn't work, and the next portion of water will just stay inside, leaving the laundry wet and smelly. A note about the filter: don't unscrew it "on the fly" and don't take the pump apart — with water still in the tub, this ends with a puddle on the floor, and the cause of the drainage issue still needs to be determined by a technician. Restarting only makes sense if there's a water intake error, such as a closed tap or a kinked supply hose — that cause is external and can be fixed without disassembly.

How repairs work with a direct contractor

This section explains how a direct contractor works: the specialist's visit, free diagnostics, approval of parts, and a warranty on the work performed. Plus — which Haier machines we service, so you know upfront if your model is covered.

In-home visit or service at the workshop

In-home service or repair at our shop — we handle everything directly: our own technician comes to your home, or you bring the machine to us. The technician arrives within 60 minutes anywhere in the city. Your request is never passed to third parties: the person who shows up is our own technician, not a subcontractor with an outside crew, so we're responsible for the work and the timeline. He brings tools for the specific job — from a filter and pump to a heating element and drum bearing — so there's no time wasted buying parts. In-home service works best for typical jobs like a filter, pump, or heating element; for a bearing replacement that requires removing the tub, he may suggest servicing at our shop, where we have lifting equipment and parts in stock. Haier washing machine repair in Almaty starts with an on-site inspection: the technician checks the model by its code and decides what can be done right at your address.

Diagnostics, approval, and warranty

  • Free diagnostics: we inspect and find the fault at no charge, and we quote the cost of work only after that — you see the cause of the breakdown and the scope of the repair before work begins.
  • Approval before work: you know in advance which part is being replaced and why, instead of finding out after disassembly; we discuss any questionable points before taking anything apart, so the final estimate doesn't come as a surprise.
  • 1-year warranty: covers both labor and the parts installed — keep your work order, as it confirms the terms of any claim.
  • Payment: you can pay by Kaspi QR, Kaspi Red, card, cash or bank transfer — cash, card, and bank transfer.

Haier models we service

Model typeRepair specifics
HW seriesEntry-level front-load lineup
I-Pro Series 5 and 7Brushless inverter motor
Slim and compactTightly packed components
Washer-dryersLonger list of parts to check
With a sealed tubBearing is not replaced separately

Haier washing machine repair essentials

Haier washing machine repair comes down to a few checkable components and correctly reading the code, so it's important to first read the error and check the accessible parts, then decide what to do. Below is a short summary to help you save time and money.

  • Drain: for a drain error, go from simple to complex — the filter at the bottom front behind the service flap, then the hose, then the pump; that way you can rule out a clog without disassembling anything.
  • Codes: check the meaning of E18 or F18 and E17 or F17 against the table for your specific model — the same code means different things on different generations, so don't rely on memory.
  • Motor and tub: inverter motors have no brushes, and the bearing is only replaced on a disassemblable tub; in a sealed tub, the assembly is replaced as a whole.
  • Before the technician arrives: drain the water through the emergency hose with a towel underneath, and don't unscrew the filter while the machine is running — the water can be hot.
  • Direct service: technician arrival within 60 minutes anywhere in the city, free diagnostics, and a 1-year warranty on labor and parts; make sure the timeline is recorded in your request.

85brands

Besides Haier, we repair other washing machine brands in Almaty

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE09

Besides Haier washing machine repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Haier washing machine repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp