Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Gorenje Washing Machine Repair in Almaty

We'll arrive within 60 minutes anywhere in the city. Free diagnostics — we'll identify the cause and give you the price before any work starts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Ruslan Ts.Dilmurat S.DimaOraz

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Gorenje washing machine faults in Almaty

Below are common symptoms and causes that the technician checks first. The exact cause is determined during on-site diagnostics.

PricesPricesTECH SERVICE03

How much Gorenje washing machine repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Gorenje washing machine repair in Almaty

Motor hums, brushes worn

1 visittime

from 3 000 ₸cost

Problem
The drum of the Gorenje washing machine stopped spinning: the motor hummed and jerked, and a motor error appeared at the start of the wash — the carbon brushes were worn.
What we did
The technician pulled out the machine, removed the back panel and belt, took out the motor, installed two new brushes, reassembled the machine, and checked the drum rotation during wash and spin.
Result
The drum spins again during wash and spin, and the motor runs without humming or jerking. Warranty on work and parts — 1 year.
I want the same
Aeg washing machine: motor hums, brushes worn out — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Gorenje washing machine repair works at your home in Almaty

From request to checking the work — five steps. Diagnostics are free.

  1. Requestsame day

    Describe the symptom and the machine model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    The technician comes anywhere in the city, inspects the machine, and notes the symptoms.

  3. Diagnosticsfree

    The technician records the fault and the component model to match the right part for your machine.

  4. Approvalafter inspection

    You choose a convenient time for the technician to come and do the work.

  5. Check and warrantyafter repair

    The technician runs a cycle and checks the work. 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our Gorenje washing machine repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a washing machine at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 05
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Gorenje washing machine repair in Almaty

Describe the symptom and the machine model — the technician will guide you from there. 1-year warranty on labor and parts, pay any way you like.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE06

Reviews of Gorenje washing machine repair in Almaty

Айгуль К.Order No. ZK-9431 · 15 November 2024

ours

Пробовал найти мастера в своём районе, но все были заняты. Утром работало, днём сломалось, вечером я уже искал сервис. Первое, что заметил: шумит при отжиме. Разобрали, посмотрели: помпа. Мастер сразу сказал, что к чему, без размытых формулировок. Шум пропал, работает мягко

Repair: washing machine

Акбота Т.Order No. 2024-1747 · 27 May 2024

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Симптом был очевидный: течёт. Сделали аккуратно, следов разборки не видно.

Repair: washing machine

Павел Ш.Order No. 96500 · 19 June 2021

ours

Жалоба простая: не греет воду. Ораз снял деталь, показал износ, вопросов не осталось. Проверил дома — всё на месте, ничего не забыли

Repair: washing machine

Богдан С.Order No. ZK-2020/415 · 19 October 2020

ours

Было важно, чтобы сделали до выходных — гости, то-сё. Отдал мастеру: промышленная стиральная машина. Больше всего напрягало: не отжимает. Заодно поменяли: подшипник. Приехал вечером, мастер ещё был на месте. Отдал 30 000, и это вместе с работой. Рекомендую. Крутит ровно, без рывков.

Repair: washing machine

Мадина Т.Order No. ZK-4096 · 23 September 2020

ours

Жалоба простая: ошибка на дисплее. Дима возился с этим дольше, чем планировал, но довёл до конца. Ребёнок уже проверил на прочность, держится

Repair: washing machine

Елдос К.Order No. 59231 · 18 April 2020

ours

Бірінші кезекте бағасын білгім келді, содан кейін әкелдім. Бағасын алдын ала айтты, артынан қосымша талап етпеді. Бағасын бірден айтпады, қайта сұрауға тура келді.

Repair: washing machine

Сауле Н.Order No. 836266 · 12 March 2020

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Поменяли: тэн. Проверили при мне, показали, что всё держит)

Repair: washing machine

Андрей П.Order No. TS-1804-808 · 4 August 2018

ours

До этого обращался в другой сервис, там только развели руками. Больше всего напрягало: не отжимает. Ребята из techservice работают давно, это чувствуется. Второй месяц — полёт нормальный.

Repair: washing machine

Ринат Х.Order No. TS-4373 · 18 March 2017

ours

Смотрел, у кого есть запчасти на такую модель. Позвонил узнать про ремонт промышленной стиральной машины. С чем пришёл: вибрация. Включил, проверил, работает.

Repair: washing machine

Полина В.Order No. 237011 · 28 June 2016

ours

Основная жалоба — ошибка на дисплее. Дильмурат С не стал навязывать дорогую запчасть, поставил нормальную. Сделали и забыл про проблему

Repair: washing machine
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Gorenje washing machine repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Gorenje won't drain water, but the filter is clean — what else could be the cause?

Then the cause is more often the drain hose — a kink or clog — or the pump itself. Check whether the pump impeller spins freely; a multimeter won't show a jammed pump. The code value depends on the model, and the technician checks it against the table.

How can you tell a pump failure from a hose clog on a Gorenje?

First check the hose for kinks and clogs, then the filter and the pump impeller. If the impeller spins freely but the water won't drain, the pump is likely faulty. The exact conclusion is made by the technician after diagnostics.

Why isn't the Gorenje heating water, and how can you check without taking it apart?

Most often the heating element or temperature sensor is to blame. Without disassembly, you can start a high-temperature wash and check whether the door glass gets warm. If the water stays cold, a technician needs to diagnose it.

The door on a Gorenje WaveActive won't open after washing — what should I do?

Wait a couple of minutes: the door lock releases with a delay, and there should be no water left in the drum. If there is water, the machine won't unlock the door — you need an emergency drain through the hose behind the service flap at the bottom front. Drain the water after unplugging the machine; it may be hot.

How many years does a Gorenje washing machine last with proper care?

Lifespan depends on load, water hardness, and care: with filter cleaning and proper loading, Gorenje machines last a long time. It's impossible to give an exact figure, but a technician can assess the condition of the components during free diagnostics.

Which Gorenje service should I choose if the machine is leaking?

Choose a workshop that handles Gorenje appliances and provides a warranty. We come to your home, find the cause of the leak during free diagnostics, and give a 1-year warranty on labor and parts.

Repair guideArticleTECH SERVICE08

Gorenje Washing Machine Repair in Almaty by Tech Service

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Gorenje washing machines in Almaty at your home or at our service center. A technician arrives within 60 minutes anywhere in the city, diagnostics are free, and we provide a 1-year warranty on labor and parts. Our technicians have 4 to 20 years of experience, and you can pay any way you like. The technician gives you the price after diagnostics.

Gorenje Error Codes and What They Mean

A signal on the panel is the starting point for diagnostics, but its meaning depends on the model. The specialist checks the combination against the table for your specific machine, not a generic list.

What F7 and F2 Codes Mean on Gorenje

  • F7 — drain: most often points to a drain problem — a clogged filter, a kinked hose, or a worn drain pump.
  • F2 — heating: signals that the water isn't heating, so you need to check the heating element and the temperature sensor.
  • Model-dependent: the meaning varies by series, so the specialist checks it against the table for your machine, not a generic list.
  • Don't continue the wash: some programs block the spin cycle, and the laundry stays in water until the cause is fixed.
  • Check order: first inspect the filter and hose, then test the pump and heating element — from simple to complex.

How to Read the Code If Your Gorenje Has No Display

On models without a display, the error is shown by indicators — a combination of flashing lights corresponds to the same fault as the numbers on a screen. The control module lights them in a specific sequence, and you decode it using the table for your specific series. You need to read the combination before the machine turns off by itself; otherwise the flashing sequence is lost and diagnostics have to start over. In our experience, owners often manage to record the flashing on their phone — such a shot noticeably speeds up the analysis when the repair specialist arrives. Also note at what stage of the program the signal appeared: during water fill, washing, or spinning. This detail narrows down the causes faster than the numbers themselves and saves time during the inspection.

Drain Codes on Other Brands for Comparison

  • Samsung: a drain error is indicated as 5E, and on some models as SE or E2.
  • Electrolux: a drain problem is displayed as E20.
  • Indesit and Hotpoint: drain is coded as F05.
  • What this means for diagnostics: the same symptom "won't drain" is coded differently for each brand, so first identify the brand and model, then read the code.

Why Your Gorenje Won't Drain, Heat, or Spin

Each symptom has two or three likely causes, and you should check them from the most common and simple to the complex — that way the technician avoids unnecessary disassembly.

Won't Drain — From Filter to Pump

  • Drain filter: located at the bottom front behind the service cover; we unscrew it first — coins, lint, and small debris block the water passage.
  • Drain hose: check if it's kinked and if there's a clog in the corrugated section, bends, or where it connects to the sewer.
  • Drain pump: remove it and check if the impeller spins freely; a multimeter won't show a jammed pump — you need a mechanical check.
  • Impeller: if it's jammed by hair or thread, the pump hums but doesn't move water; failures here are usually caused by debris and a clogged filter, not scale.
  • Check order: we start Gorenje washing machine service in Almaty with this chain because it covers most drain-related calls.

Won't Fill with Water and Won't Heat — Two Different Chains

If water isn't filling, check the tap, the inlet filter screen, and the inlet valve. If it's not heating, check the heating element and the temperature sensor. The inlet filter screen gets clogged with rust and sand, the valve doesn't get enough pressure, and the machine sits with an empty drum without a fill error. With heating, the chain is different: the heating element gets scaled up or burns out, the temperature sensor gives incorrect readings, and the wash runs in cold water. Gorenje washing machine repair in Almaty most often starts with these two chains, so the technician first checks water fill and heating, and only then starts disassembly. You can check heating without disassembly by the temperature of the door glass twenty to thirty minutes after the program starts — if the glass stays cold, the unit is almost certainly faulty. On most brands, the heating element is replaced without removing the tank, so "not heating" rarely means a long teardown — more often the technician gets by removing the front panel and replacing the unit in place.

Not spinning, leaking from the bottom, door won't open

SymptomFirst causeSecond causeThird cause
Not spinningload imbalancedrain problembelt or motor
Leaking from the bottomhosespumphoses
Leaking at the front by the doordoor seal——
Door won't opendoor lock (UBL)remaining water—
Jumping during spinimbalancebeltmotor

Gorenje components and how they are disassembled

In Gorenje, as in most front-loading machines, the components are laid out predictably, and this determines how complex the job will be. We explain what goes where and which operations require full disassembly.

Where the heating element, pump, and filter are on Gorenje

On Gorenje, the heating element and pump are located the same way as on most front-loading machines: the heating element at the front, the drain pump at the bottom, and the drain filter at the bottom front behind the service flap. The heating element is mounted in the tank from the front, so access opens up after removing the front panel, not through the top or bottom of the cabinet. The drain pump sits under the tank and is connected to the filter and hoses, and the technician checks its impeller by hand: a multimeter won't show a jammed pump, but you can immediately see whether it spins freely. The filter can be removed without tools — behind the same service flap at the bottom front. Knowing this layout, the technician doesn't disassemble the whole machine just to replace the heating element: the front panel comes off, and the job takes less time. That's why Gorenje washing machine repair with this component layout goes faster than on models with a different parts arrangement.

Drum bearings and split tank

  • The longest operation: replacing a bearing requires removing the tank and drum, so the technician schedules such work separately from small jobs.
  • Split tank: the bearing is pressed out, replaced, and the unit is reassembled, and after assembly the drum is checked to make sure it spins freely.
  • Sealed tank: the bearing is not replaced separately — this is a design limitation, not the technician's choice, and it must be discussed before work begins.
  • Wear symptom: rumbling during spin and drum play point to the bearing, but the cause should be confirmed before disassembly.

Control module — repair or replace

  • Repair first: we check the control board and decide whether it can be repaired, and we only suggest a replacement when repair is not possible.
  • What we check: board traces, connector contacts, and signs of overheating — these faults can usually be fixed.
  • When we replace: if the board is damaged beyond repair, repairing it is not practical and the unit is replaced entirely.
  • Diagnostic order: the board is one of the reasons a cycle stops midway, but not the main one: drainage, imbalance, or the motor are more often to blame.
  • Why this approach: starting with the electronics is not cost-effective — simple causes are ruled out first, and only then is the module checked.

How Gorenje diagnostics differ from other brands

Gorenje is several generations of machines, not a single appliance. Diagnostics are based on the series, design, and year of manufacture of the specific unit.

WaveActive and SensoCare series vs. older models

  • WaveActive and SensoCare: the electronics and controls here differ from older series, so we start diagnostics by identifying the series and the appliance.
  • Older lines Essential, Classic, Simplicity: simple electromechanics and early modules, where the fault is more often traced through the power circuit and sensors.
  • Advanced: an intermediate generation with its own set of modes — we check the code and behavior against the table for this series specifically.
  • Door lock (UBL): on WaveActive, the door may not open after washing due to lock logic rather than a breakdown — the technician checks this before disassembly.
  • Servicing WaveActive and SensoCare: on these series we read the electronics first and only move to the mechanical parts after checking the board and sensors.

Models with a water tank

On a Gorenje with a water tank, "not filling" is a different fault than on machines connected to the water supply, and it cannot be diagnosed as standard. This design has no inlet valve or inlet filter mesh on the water line: water comes from the tank, so the technician checks the tank itself, its flaps, and the path of water from it to the tub. Repairing washing machines with a water tank requires a separate approach: we service such appliances separately and confirm the design before the visit — otherwise the specialist arrives expecting a valve that the machine does not have. In my opinion, this is the most common source of confusion on the first call: the owner describes the symptom as "not filling with water," but the cause lies in a different component. That is why, before diagnostics, we ask for the series and whether there is a tank.

How a part is matched to a specific model

We select parts by part number or model code, and we identify a specific Gorenje by the product code on the rating plate inside the door. The product code and model code give an exact match to the generation: on WaveActive, SensoCare, and older series, pumps, heating elements, and locks that look the same differ in fit and connector. Selecting by code rather than by eye eliminates the situation where a visually similar part does not fit or does not match the contacts. In our practice, checking the rating plate takes a couple of minutes and removes the risk of a repeat visit due to incompatible parts. If the plate is worn, the code is confirmed from the electronics and characteristic components of the appliance, and then checked against the manufacturer's catalog.

How the repair is done and what the owner should do before the technician arrives

Gorenje repairs are done at home or at the service center, and before the technician arrives, the owner should take a couple of safe steps that simplify diagnostics and protect the floor from excess water.

Repair at home or at the service center

  • Arrival within 60 minutes: a technician comes anywhere in the city and determines on site whether the problem can be fixed without moving the machine.
  • What we do on site: replace the heating element, pump, drain filter, hoses, belt, and control module — these parts are accessible without removing the tub.
  • When service is needed: bearing replacement requires removing the tub and drum, so this work is best done in the workshop.
  • Diagnostics are free: based on the results, the technician names the cause and scope of work, and quotes the price before starting.
  • Gorenje washing machine repair at home covers most requests, and we only take the machine to the service center for labor-intensive tub operations.

How to safely drain water if your Gorenje won't drain

  • Unplug it: pull the plug from the socket — the pump and module must not receive power while you're working with water.
  • Find the service cover: it's at the bottom front, behind it are the emergency drain hose and the drain filter.
  • Lay down a towel: the water in the tub can be hot, and a thin stream from the hose quickly spreads across the floor.
  • Drain through the hose: remove the cap, point the hose into a basin, and wait until the water stops flowing.
  • Don't unscrew the filter "on the fly": with a full tub it releases a strong flow that floods the floor and the neighbors below.

How to make sure the technician replaced the right part

We agree on the work after free diagnostics and run a test wash after service so the owner sees the result before paying. During the check, the technician runs a cycle with water fill, heating, and spin — these are the stages that reveal whether the cause is gone. The replaced part is shown to the owner: the pump shows debris and impeller wear, the heating element shows scale and a short, the belt shows stretching and cracks. We accept cash, card, and transfer, and a 1-year warranty on labor and parts is recorded for the replaced unit. If the symptom returns after service, the warranty lets us address the same cause without extra charge — so keep the description of the work performed. In my opinion, a test wash in front of the owner is more convincing than any explanation.

Who to trust with Gorenje repair in Almaty

When choosing a Gorenje specialist, three things matter: whether they know the brand, who exactly will come on the call, and what warranty the service gives for the result.

A direct contractor, not an intermediary

  • Our own specialist: our employee comes on the call, not a subcontractor with someone else's crew — the person who did the work is responsible for it.
  • At home or in the service center: we fix some breakdowns on site, and take severe cases involving the tub and drum to the workshop.
  • No chain of intermediaries: we are not an aggregator or a dispatch service, so your request is not resold to third parties.
  • One point of responsibility: if an issue remains after the visit, the same service deals with it, not a contractor we found on the side.
  • Transparent contractor: the owner knows in advance who will come and who is responsible for the result.

Warranty and payment

We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the specialist quotes the price after free diagnostics. Diagnostics is included in the visit and is not charged separately: first they find the cause, then agree on the scope of work and the final amount with the owner. The commitment covers both the installed part and the work itself — if the same fault returns, our service will fix it, not an outside workshop. You can pay in any convenient way, including bank transfer. In our experience, a common cause of disputes is a warranty on the part only: it's important for the owner to clarify before work starts what exactly the service covers. For Gorenje, we cover both — the part and the labor.

Specialist experience and city-wide visits

  • 4 to 20 years of experience: our technicians work with appliances from different generations, including the WaveActive and SensoCare series.
  • Arrival within 60 minutes: we reach any address across the city, including remote areas of Almaty.
  • Brand knowledge: based on the symptom, an experienced technician quickly identifies the typical cause — drainage, heating, or drum imbalance.
  • Fewer unnecessary checks: the specialist doesn't take the machine apart at random but goes from the error code to the specific component.
  • One visit: for a typical breakdown, they bring the needed part and resolve the issue on the spot, with no repeat call.

What to remember about Gorenje washing machine repair

We've gathered what most often determines the outcome of a Gorenje repair: how to read the code, where to look for the cause, and what to do before the technician arrives.

  • Error code: for Gorenje it's a starting point, but the meaning depends on the model — check against the table for your specific machine.
  • No drainage: check the chain from the filter to the hose and pump, rather than starting with disassembly.
  • Components: they are located predictably, but bearing replacement is the longest job, and in a sealed tank the bearing is not replaced separately.
  • Series: WaveActive, SensoCare, and models with a water reservoir are diagnosed differently.
  • Before the technician arrives: unplug the machine and drain the water through the emergency hose behind the service flap at the bottom front.

85brands

Besides Gorenje, we repair other washing machine brands in Almaty

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE09

Besides Gorenje washing machine repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Gorenje washing machine repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp