experience10 yearsVasiliy Z.
Senior TV repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician comes to you with tools and parts. Free diagnostics, technician arrival within 60 minutes across the city.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and the components that cause them. Note the conditions under which the symptom appears: after turning on, when heating up, or when changing channels.
power supply, fuse, button
from8 000 ₸
backlight, inverter, matrix cable
from9 000 ₸
overheating, bulging capacitors, power
from7 000 ₸
matrix cable, T-CON, contacts
from9 500 ₸
speakers, amplifier, settings
from3 500 ₸
LEDs, driver, power
from8 000 ₸
IR receiver, remote, batteries
from9 500 ₸
matrix, diffuser, backlight
from3 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 9 000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the TV at your home.
Choose a convenient visit time and prepare access to the TV.
Technician arrival within 60 minutes across the city, with tools and testers.
Diagnostics are free: the technician identifies the cause and the cost of work.
Discuss the scope of work and clarify part compatibility with the technician.
Test picture and sound after reassembly.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
experience18 yearsSmartphone repair technician
We reply during working hours
Specify the model and symptom — the technician will select tools and parts for your specific issue. 1-year warranty on labor and parts, we accept Kaspi QR, Kaspi Red, card, cash or bank transfer.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Полина В.Order No. 2025-9877 · 20 June 2025
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. С чем пришёл: нет картинки. Сделали и забыл про проблему.
Сергей Р.Order No. TS-2507-662 · 31 March 2025
oursОсновная жалоба — полосы. Дамир М помог выбрать, без навязывания. Проверили на всех режимах, всё чётко.
Максат О.Order No. TS-2309-269 · 27 March 2023
oursДруг посоветовал, у него похожая история была. Диагностика спутникового ресивера — с этого всё началось. Повод для визита: зависает. Сергей Архипов не стал навязывать дорогую запчасть, поставил нормальную. Диагностику сделали бесплатно, хотя я был готов платить. Все разъёмы на месте, ничего не люфтит.
Анна Т.Order No. TS-8586 · 1 August 2021
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Обидно было, техника не старая совсем. Жалоба простая: не включается. Диагностику сделали бесплатно, хотя я был готов платить. Цену обсудили до начала, сюрпризов не было. Из деталей — блок питания. Внешне как новый, если не считать мелкой царапины.
Ляззат К.Order No. 14997 · 1 January 2021
oursИскал мастерскую поближе к дому, чтобы не мотатся с техникой через полгорода. Жалоба простая: зависает. Сказать, что доволен — ничего не сказать!!
Арман К.Order No. ZK-2020/165 · 14 November 2020
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. До последнего откладывал, но пришлось признать: не включается. Сергей Архипов перезвонил, когда всё было готово. Поставили новую деталь: тюнер. Функции все на месте, ничего не отвалилось.
Виктор Ф.Order No. 2019-6970 · 21 August 2019
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Повод для визита: не включается. Работает как раньше, придирок нет.
Санжар О.Order No. TS-5677 · 24 May 2019
oursПервое, что заметил: слетела прошивка. Функции все на месте, ничего не отвалилось.
Андрей П.Order No. ZK-2018/497 · 7 March 2018
oursНужен был счёт и чек, у нас техника на балансе организации. Такое чувство, что техника сговорилась ломаться вся разом. Повод для визита: нет сигнала. Внешне как новый, если не считать мелкой царапины)
Марат Ж.Order No. TS-1707-894 · 20 November 2017
oursДамир М помог выбрать, без навязывания. Проверил дома — всё на месте, ничего не забыли.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionThomson TVs most often have issues with the power supply, screen backlight, and control board. Speaker and remote receiver problems are less common. The technician will pinpoint the exact cause during free diagnostics.
Yes, Thomson plasma TVs can be repaired, though parts for older models are harder to find. The technician will run free diagnostics and tell you what exactly failed and whether it can be fixed.
First, check the volume level, mute mode, and the cable or signal source. If the sound doesn't come back, the speakers or sound board are likely faulty, and the technician will determine the cause during free diagnostics.
Yes, in most models the backlight can be replaced separately from the matrix if the panel itself is intact. The technician disassembles the screen at the service center and replaces the failed LED strips while keeping the matrix.
It's better not to use it: moisture inside causes corrosion and short circuits, even if the device works right now. It's best to unplug the TV immediately and give it to a technician for drying and cleaning the boards.
First, check the batteries and point the remote directly at the receiver, and also try the buttons on the TV body. If the TV responds to the body buttons, the issue is likely with the remote or the receiver, and the technician will determine the cause during diagnostics.
Tech Service repairs Thomson TVs in Almaty: our technician comes to your home within 60 minutes or we fix the TV at our service center. Diagnostics are free, the technician gives you the price after diagnostics, and there's a 1-year warranty on labor and parts. Our technicians have 4 to 20 years of experience and know the typical failures of this brand.
Like any LED model, Thomson has predictable weak points. Let's look at what fails most often and how it shows up on screen.
The power supply handles turning on and standby mode, and its failure is one of the most common reasons a Thomson TV won't come out of standby. The symptoms are typical: the screen stays dark, the indicator blinks or stays solid, and the vents stay cold. After a power surge, the input capacitors, diode bridge, and PWM controller burn out—even though the board may look fine from the outside. Less often, standby is held not by the power supply itself but by a circuit on the main board, and then replacing a single component doesn't help. If the TV is dead after a surge and the indicator blinks, start checking the power supply, not the panel—that rules out the most expensive scenario. If you need Thomson TV repair in Almaty, diagnostics start with checking the power supply.
When you have sound but a black screen, the LED backlight is usually to blame; stripes and distortion point to T-CON, and hanging on the logo points to the main board. The backlight makes the matrix glow, and when it fails, sound remains but there's no picture: individual LEDs burn out or the driver stops supplying current. T-CON builds the picture from the main board signal—its failure causes vertical stripes, a negative image, or horizontal tearing. The main board with firmware handles system startup, so hanging on the logo or a reboot loop usually points to it, not the panel. You can tell backlight from matrix with a flashlight: if you shine it on the screen and see a faint image, the panel is fine and the LED assembly needs replacing.
| Symptom | What we check | What we usually replace |
|---|---|---|
| Won't turn on, indicator blinks | power supply, standby mode | power supply |
| Sound but no picture | backlight, driver | LED backlight |
| Vertical stripes | T-CON, ribbon cables | T-CON board, ribbon cable |
| Hangs on logo | main board, firmware | main board |
| Doesn't respond to remote | IR receiver, buttons | IR receiver |
| HDMI or USB not working | ports, ribbon cables | ports, ribbon cable |
The indicator on the front panel is the first source of clues about the TV's condition. By how it lights up and blinks, you can narrow down the suspect components before the technician arrives.
A blinking red indicator most often points to a power supply or control board fault, not the panel itself. The unit tries to come out of standby, gets incorrect parameters from the secondary circuits, and goes back into protection—the cycle repeats until the fault is fixed. On Thomson models with an external adapter, the same picture occurs when the output voltage drops under load: the backlight starts, consumption rises, and protection trips. The panel itself remains intact, but it simply doesn't receive correct power. Another cause is swollen electrolytic capacitors in the secondary power filter: their capacitance drops, the voltage sags in bursts, and protection catches every dip. The number of flashes in a series is interpreted differently across Thomson models, so counting flashes is worth doing to describe the issue to a technician, not for a self-diagnosis. Record the rhythm and number of signals on video—with such a recording, a specialist will quickly understand which unit has gone into protection and will bring the right parts.
A completely dark indicator means voltage isn't reaching the standby circuit, so checks start with the power cord and power supply. First, rule out the outlet and cable: a frayed cord at the plug and an oxidized contact produce exactly the same picture as a blown fuse. Then check the standby circuit—its output should have stable voltage, which is absent if the power switches have failed. A voltage surge in the mains causes failure of the power section and control board: the varistor and fuse take the hit, but the secondary circuits after them often suffer, and the standby mode chip fails along with them. If the TV goes silent after a power surge, it's worth telling the technician right away—this narrows the check to the power circuits and saves diagnostic time. A dark indicator with an intact cord is a reason not to disassemble the panel yourself but to describe the unit's behavior to a specialist: an accurate account of when the failure occurred helps find the burned-out unit faster.
Work starts not with replacing parts but with free diagnostics. Let's look at which units are checked, how the scope of work is agreed, and how we confirm the device is working.
During free diagnostics, our specialist checks the power supply, backlight, T-CON, and control board and names the cause of the failure before work begins. First, the back cover is removed and swollen capacitors in the primary circuit are inspected, then the LED backlight strips are tested for open circuits and the voltage at the power supply output is measured. The T-CON is tested separately: its ribbons and power lines are checked, because image distortion with working sound often comes from there. The control board is tested for button response and remote signal reception. Diagnostics at home and at the service center provide a different scope of checks, so for complex cases the specialist immediately says where the cause can be determined more accurately.
We agree on the cause and scope of work before any intervention, and the specialist names the cost after free diagnostics, once the faulty unit is clear. The owner hears in advance which part failed, why it happened, and which part of the board will be replaced—Thomson TV repair pricing is then discussed specifically, not "by eye." We accept Kaspi QR, Kaspi Red, card, cash or bank transfer for companies, so the owner can choose what's convenient. Agreeing before work begins protects against replacing the wrong unit: the owner knows in advance what operation is being performed and why. It also fixes the boundaries of the work—no additional items without prior notice. If a related fault is discovered during disassembly, the technician stops and re-agrees with the owner on what operations are added to the already agreed scope.
After the repair, we test the TV and check power-on, picture, sound, and ports before returning it to the owner. The unit is run through different scenes — static, dynamic, dark and bright areas — to make sure the backlight is even and there is no light bleed at the edges. We separately check the HDMI and USB ports, the audio path on both channels, and the remote response. It's best to test with the same signal source the TV uses at home, as this reveals issues that a test signal might miss. We provide a 1-year warranty on labor and parts, so you can comfortably verify the result at home. If the picture or sound is unstable after the part is installed, the owner reports it, and the technician re-inspects the same unit.
Not every Thomson breakdown can be fixed on-site. Let's look at when a technician visit is enough and when the TV needs to be taken to the service center, and how to prepare for the visit.
At home, we repair the power supply, control board, IR receiver, and ports, and a specialist arrives within 60 minutes anywhere in the city. The on-site technician brings tools for typical series faults: trouble starting, spontaneous shutdown, no response to the remote. The control board is checked on-site — it's accessible after removing the back cover — and the power supply is diagnosed by output voltages right at the connectors. The IR receiver and HDMI jacks are replaced without taking the case away: these components are on the periphery of the chassis. Thomson TV repair in Almaty at home covers exactly these typical faults when the component is accessible without disassembling the panel. A home visit is convenient if the TV is wall-mounted or hard to remove — work is done on-site without taking the panel off the bracket. Before the visit, let us know where the unit is placed: against a wall or in a niche — this affects access to the back cover.
We replace the matrix and perform complex panel work at the service center because it requires conditions that aren't available at home. The Thomson matrix is the most expensive component: replacing it requires a stable surface, dust protection, and careful handling of the backlight cables, so the panel is transported horizontally. On older Thomson models, there's also a shortage of compatible panels, and finding one takes time. With a damaged matrix, this work is often compared to buying a new TV — the specialist will honestly say when panel replacement isn't worthwhile and it's easier to get a unit with a working screen. They quote the cost after free diagnostics, once the cause is clear. For units with cracked glass, ask about the diagonal in advance: it determines whether a donor panel can realistically be found.
When choosing a technician, a TV owner cares about three things: what obligations the provider takes on, who comes for the visit, and who is responsible for the result. Let's go through each point.
We give a 1-year warranty on labor and parts, so both the quality of the work and the installed component stay protected. These are two separate commitments: the first covers soldering, installation, and board setup; the second covers the part itself, whether it's a power supply, backlight strip, or T-CON. Technicians with 4 to 20 years of experience remember which procedure was performed and which unit was replaced, and that record determines whether a case falls under warranty. Separate protection for the part matters because a failed component gets replaced rather than blamed on operating conditions. Replacement follows the same pattern as the initial service: the technician comes out, checks the unit, and swaps it without arguing about the cause of failure. So keep the description of the work performed — it makes things easier if your Thomson TV signals a problem again.
Tech Service is a direct provider, so our own technician comes to you, not a middleman, and he's the one accountable for the result. The mobile technician reaches you anywhere in the city within 60 minutes with tools and test equipment, runs the free diagnostics himself, and names the cause of the breakdown himself. No middleman is involved in this setup: there's no one to pass responsibility between a dispatcher and a contractor, and knowledge of the Thomson brand stays with one person from inspection to post-repair check. Direct contact is convenient: you can ask about the details of an order already in progress from the same person who did the work. We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician quotes the cost after the free diagnostics — before you agree to the service. If your Thomson TV behaves differently than expected after the technician's visit, the same specialist handles it, not a random operator.
We've gathered the key points that determine the outcome of the work in one place: typical units, reading the indicator, the order of steps, and choosing a location. Below is a short summary you can use to check a technician before the visit.
63brands
We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your TV won't turn on, first check the outlet, power cable, and the button on the TV itself—not the remote.
21 November 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read












