experience10 yearsVasiliy Z.
Senior TV repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
The most frequent symptoms and likely causes. The technician will pinpoint the exact cause after diagnostics.
Power supply, fuse, or button
from8 000 ₸
Backlight, panel, or ribbon cable
from9 500 ₸
Ribbon cable, backlight, or board
from9 500 ₸
Speakers, amplifier, or settings
from9 500 ₸
Remote, receiver, or board
from8 000 ₸
Overheating, power supply, or board
from7 000 ₸
LEDs, driver, or board
from5 500 ₸
Outlet, cable, or power supply
from3 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 9 000 ₸cost

BeforeAfter5 steps

From request to final check — five steps.
Send a request by phone or WhatsApp and describe the symptom.
The technician asks about how the TV behaves so they can bring the right tools and parts.
The technician checks the power, backlight, panel, and boards, and identifies the cause.
You approve the cost and scope of work; only then does the repair begin.
We turn on the TV and check the picture and sound after reassembly.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
experience18 yearsSmartphone repair technician
We reply during working hours
Call or message us on WhatsApp. A technician will come at a time that suits you and diagnose on site. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Богдан С.Order No. TS-8134 · 4 December 2025
oursҰзақ уақыт бойы жөндеуге беретін жер іздедім. Диагностика тегін болды, бұл жағы жақсы. Кепілдік берді, бұл мен үшін маңызды. Қосымша бөлшек қажет болды, бірақ бағаны көтермеді. Алдын ала айтқан уақыттан ерте бітірді. Екінші рет хабарласуға тура келді, бірақ кінә оларда емес. Тексеру кезінде бәрін өзі көрсетті. Бөлшектің бар-жоғын бірден тексерді, қоймада бар екен. Жұмыс барысын көрсетіп отырды, жасырған жоқ. Асыққан адамға ыңғайлы.
Ринат Х.Order No. TS-8652 · 24 January 2025
oursСергей Архипов снял деталь, показал износ, вопросов не осталось. Внешне как новый, если не считать мелкой царапины.
Роман З.Order No. TS-6089 · 12 November 2023
oursДо этого обращался в другой сервис, там только развели руками. Утром работало, днём сломалось, вечером я уже искал сервис. Жалоба простая: зависает. Созвонились, договорились на удобное время, никто не тянул. Поставили новую деталь: плата. Даже с учётом запчасти вышло гуманно. Буду советовать знакомым. Проверил дома — всё на месте, ничего не забыли.
Нурлан Б.Order No. 55788 · 1 April 2023
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Оставил заявку на ремант телевизора. Первое, что заметил: нет картинки. Разобрали, посмотрели: подсветка. Оплатил картой, чек дали. Починили и дали гарантию на месяц.
Аружан К.Order No. TS-2206-402 · 20 May 2022
oursТанысым осы жерді мақтап, кеңес берді. Асығыс болмасам да, бір күнде бітіретінін айтты. Ұсынамын, текке ақша алмайды.
Аяна Е.Order No. 60948 · 16 January 2022
oursСергей Архипов честно сказал, что менять, а что ещё походит. Второй месяц — полёт нормальный)
Руслан Д.Order No. 853963 · 30 April 2020
oursДолго откладывал ремант, потом всё-таки собрался. Отдал 26 500, и это вместе с работой. Сделали аккуратно, следов разборки не видно
Станислав К.Order No. 799869 · 11 June 2019
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Сначала сомневался, мало ли что. Повод для визита: не включается. Разобрали, посмотрели: подсветка. Посмотрели, назвали срок — два дня. По цене не скажу, что дёшево, но справедливо. Ставлю пятёрку. Функции все на месте, ничего не отвалилось.
Нурлан Б.Order No. TS-1907-200 · 1 January 2019
oursТанысым осы жерді мақтап, кеңес берді. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды
Гульмира С.Order No. TS-8372 · 10 March 2017
oursНастроения писать не было, но пусть будет. Проблема — полосы. Сергей Архипов взялся за то, от чего другие отказались. Мастер посмотрел, сказал, что возьмётся, и взялся. Из деталей — матрица. Сравнивал с двумя другими — здесь вышло ровнее всех. Буду советовать знакомым. Уже полгода — ни одного сбоя
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, in most cases this kind of TV can be repaired: a power surge usually damages the power supply, not the panel itself. The technician will make an accurate diagnosis during free diagnostics, and it depends on the model.
First, check the sound settings and connected devices—sometimes the issue is there. If that doesn't help, the problem is in the speakers or the board—the technician will figure it out at your home, and it depends on the model.
The technician fixes most breakdowns right at your home: power supply, backlight, control board. The TV is taken to the service center only if the matrix needs replacing or complex soldering is required.
Yes, the backlight is replaced separately from the matrix: LED strips and diffusers are changed without replacing the screen itself. The work is done at your home, but the exact scope depends on the model.
It's better not to use such a TV: stripes often indicate a problem with the ribbon cable or the matrix, and over time the fault may get worse. It's best to show it to a technician before the screen fails completely.
A blinking indicator usually signals a fault in the power supply or backlight, but the exact meaning depends on the model. The technician will check the TV at your home and determine the cause.
Tech Service repairs Artel TVs in Almaty with its own technicians who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.
In budget Artel models, the power supply or backlight most often fails — these components are the first to suffer from voltage surges in the mains. By the type of indicator signal, the technician understands where to look first.
A blinking red indicator on an Artel most often signals a power supply fault or that the control board is failing its self-test at startup. On our city call-outs, this indication occurs on models with an external adapter and on TVs with built-in power — the logic is the same: the circuit doesn't reach operating mode, so the processor retries startup and drops the standby voltage. Blinking with a steady rhythm usually points to power supply protection, while erratic or fading blinking points to a voltage drop on the control board. Less often the firmware is to blame: after a failed update, the controller gets stuck in a reboot loop. It helps to count the blinks and remember their rhythm before the technician arrives — the blinking pattern makes it easier to tell a power problem from a firmware failure. If the TV won't turn on and the indicator blinks, Artel TV repair in Almaty starts with free diagnostics — the technician will determine which component isn't reaching operating mode.
If the indicator is lit but the screen and sound don't start, we first check the power supply and standby voltage circuits, then the control board. During free diagnostics, the technician opens the case, tests the output power channels, and checks whether the correct voltage reaches the control board. On Artel models with an external adapter, the adapter itself is checked separately: a voltage drop under load is immediately visible on a multimeter, even though it shows normal at no load. Next, they inspect for bulging capacitors and signs of overheating on power components. A lit indicator is a good sign: it shows the standby circuit is alive and narrows the search to the power section and board startup. If the cause isn't found after checking the power supply and control board, the technician checks the startup circuits and connector condition.
An Artel turning off by itself after 10–15 minutes of operation is most often related to overheating of the power supply or backlight, less often to degradation of the control board. The logic is simple: while the case is cold, the circuit handles the load, but as it warms up, thermal protection kicks in or a degraded capacitor fails. The backlight behaves similarly — when the strips overheat, the driver cuts power, and the TV goes dark without a sound signal. The technician checks the temperature of power components under load and the condition of the backlight driver, and confirms the cause during free diagnostics before disassembly. If the TV turns off faster the longer it has been running, this points to a thermal cause rather than a firmware failure. The technician reproduces this defect pattern under load to confirm the cause before replacing parts.
The nature of the defect shows where to look for the cause: in the backlight, cables, or matrix. Let's go over three common symptoms and what can be fixed on-site.
When there's sound but no picture, we check the LED backlight and its driver — on budget Artel TVs this is the most common cause, and the backlight can be replaced without changing the panel. The driver powers the LED strips behind the panel: if one strip breaks, the whole circuit goes dark and the screen stays black even though sound and menus work. The panel itself is usually fine in this case — you can see faint outlines if you shine a flashlight on the screen at an angle. You can check the backlight without disassembling the panel: shine a flashlight in a dark room, and if you see the picture outlines, the strips simply aren't lighting up and the panel doesn't need replacing. At intake, the technician first rules out the driver, because replacing strips without checking the power supply brings the defect back within a few weeks.
Vertical lines on an Artel most often point to the panel ribbon cables or the T-CON board, not the panel itself. The ribbon connects the control board to the panel: an oxidized or loosely seated connector causes even lines across the full height of the screen, and the T-CON generates the image signal and produces the same artifacts when it fails. The technician removes the back cover, checks the ribbon connections, tests the contacts and checks the T-CON separately from the panel. If the lines appear in the TV menu as well, not just on broadcast, the problem is in the image path, not the signal source. In my opinion, this is the most telling test: it immediately rules out the set-top box, cable and channel settings, so diagnostics should start with the menu.
When the sound disappears, we first check the settings and signal source, then the speakers and the audio path on the control board. A common cause is a knocked-down volume level on the set-top box itself or the wrong output selected in the menu, and this is visible before opening the case. Next, the technician inspects the HDMI connectors: oxidized contacts or a bent pin in the socket can mute the channel even though the picture comes through another cable. Speakers are checked by testing the coil and inspecting the surround — a crack in the cone is heard as rattling. Hoarseness instead of clear sound at medium volume usually indicates speaker wear, while complete silence points to the audio circuit on the board. That's why during diagnostics we first listen to the nature of the distortion: it tells us whether to replace the speaker or repair the board.
Control issues on Artel TVs are more often software than hardware: firmware, board memory, Wi-Fi module. Reflashing gets the unit working again in some cases, but damaged memory or a burnt-out module requires part replacement.
Freezing on the logo on an Artel is most often related to the firmware or the control board memory, less often to the power supply that can't hold voltage under load. The technician checks the standby circuit and power section, measures the drop at startup, tests the board separately on the bench and assesses the flash memory condition. Firmware crashes after a power surge or a failed update, and then the unit freezes on the splash screen without reaching the menu. Damaged memory cells produce the same symptom, but reflashing doesn't fix them — the board is replaced. If after a power reset the unit again reaches the logo and freezes, the problem is repeatable and should be shown to the technician before disassembly: that way the cause is visible immediately, without unnecessary opening of the case.
If the Artel doesn't respond to buttons, we check the remote itself, the IR receiver and the power; for Wi-Fi and Smart TV issues — the network module and firmware. The remote is easy to check with a phone camera: if you see the diode glow on the screen when pressing a button, it's working and the problem is in the TV's receiver. Next, the technician checks the receiver contacts and the ribbon to the control board. With Smart TV it's different: the Wi-Fi module can drop out from overheating or weak power, and apps freeze due to outdated firmware. We go through both scenarios in turn — first the remote and receiver, then the network module and software. Checking with a camera saves time: it immediately rules out a faulty remote and moves diagnostics to the receiver.
| Work | Where it's done | What we check |
|---|---|---|
| Diagnostics and setup | At your home | Power, signal, firmware |
| LED backlight replacement | At your home or in the service center | LED strips, backlight driver |
| Power supply repair | At your home or in the service center | Power section, standby circuit |
| Control board soldering | In the service center | Memory, startup circuits |
| Work with the panel and ribbon cables | In the service center | T-CON, ribbon cable contacts |
We walk you through the step-by-step process for your Artel TV — from request and home visit to checking the result after the work — so you understand each stage and know what to expect.
Once you request a visit, our technician arrives at your home within 60 minutes anywhere in the city, inspects your Artel TV, and runs free diagnostics. We cover both residential neighborhoods and the city center — the technician arrives within 60 minutes anywhere in the city. On site, they remove the back cover, check the power supply, backlight, and control board, and listen to how the TV behaves when turned on and after a few minutes of operation. The technician takes Artel model specifics into account, so the cause is found faster than with a generic inspection. Diagnostics are free whether or not you proceed with the repair. At this stage, it helps to provide the exact model and describe how the fault shows up — this speeds up finding the cause.
After diagnostics, we tell you the cause and the cost of the work, get your approval, and only then start the repair. The technician explains what failed — the power supply, backlight, board, or panel — and what options are available in each case. You decide whether to proceed or stop at diagnostics: we don't start work without your consent, and the check remains free. Then the work is done on site if the fault allows, or the TV is taken to the service center for complex board operations. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies — cash, card, or transfer. The cost is quoted after free diagnostics, so the final amount depends on the cause found, not on a phone description. If the needed part isn't on hand, the technician will agree on next steps with you before starting work.
After the work, we check the result together with you: we turn on the TV and check the picture, sound, channels, and Smart TV. The technician runs through several modes — switching sources, brightness, volume, network connection — to make sure the root cause is gone, not just the visible symptom. You play your own content and watch how the TV holds the picture for several minutes. A 1-year warranty on labor and parts starts from the moment you accept the result — during this period, if the fault recurs, we'll return to the TV. It's best to test with the content where the fault appeared most often — that way you can immediately see whether the cause is gone, not just the symptom.
We explain what terms an Artel TV owner gets when working with a direct contractor: what the warranty covers, who is responsible for the work, and how payment works after free diagnostics.
A 1-year warranty on labor and parts is a single coverage that keeps your Artel service result stable even after the technician leaves. The year covers both the replacement or adjustment procedure itself and the installed part — power supply, control board, backlight, or any other component that was replaced. If the TV acts up again during this period, it's handled as a warranty claim, not a new request, so you don't pay twice for the same repair. Practical tip: keep the document confirming the work performed — it speeds up claim approval. On a repeat visit, the technician starts by checking the component that was replaced, which shortens diagnostics and eliminates a second charge. The warranty applies to the entire procedure and the part as a whole, so a failure of that component during this period is fixed at no additional cost to the owner.
Tech Service is a direct provider: our own technician comes to you, not a contractor from an aggregator, so we're the ones responsible for the quality of the work. The same service that takes your request also performs the work — no handing off to a third-party crew. Our technicians have been working with Artel from 4 to 20 years depending on the specialist, so common board and backlight faults are familiar to them, not something they figure out on the spot. City visits take up to 60 minutes. With a direct provider, the technician knows typical Artel breakdowns from experience with the brand rather than starting from scratch on site. That means diagnostics go faster and the repair doesn't stretch over multiple visits. Practical tip: when you book, confirm that the technician is a staff employee of the service, not a contractor, and note that in the order.
We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician gives you the price after free diagnostics, once the cause of the breakdown is known. Until then, no one quotes a sum — first the specialist finds the fault, explains which component failed and what will be done with it, and only then gives the cost of the work. That way you pay for a specific procedure, not for a guess over the phone. Diagnostics are free whether or not you approve the work, so you can decide without pressure over the amount. In my view, this order is more convenient for the owner: first the facts about the breakdown, then the decision and payment in a convenient way. Approval happens with the technician on site, before work begins.
We've gathered in one place what determines the decision for each type of Artel fault: where to start diagnostics, what can be done at home, and when restoration makes economic sense.
63brands
We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your TV won't turn on, first check the outlet, power cable, and the button on the TV itself—not the remote.
21 November 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read












