experience10 yearsVasiliy Z.
Senior TV repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will pinpoint the exact cause after free diagnostics.
Button, remote, control module
from8 000 ₸
Backlight, inverter, ribbon cable
from7 000 ₸
Backlight LEDs, diffuser
from9 500 ₸
Panel, T-CON, ribbon cable
from8 000 ₸
Overheating, power supply, board
from7 000 ₸
Speakers, amplifier, settings
from8 000 ₸
Module, firmware, router
from8 000 ₸
IR receiver, batteries, remote
from9 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 9,000 ₸cost

BeforeAfter5 steps

Five steps from request to check.
Send a request — a technician will arrive within 60 minutes anywhere in the city.
The technician will ask about the model, symptoms, and year of purchase to bring the right tools.
We agree on the work and parts before starting the repair.
The technician will cut power to the TV, protect the screen, and mark the screws before starting.
We'll test the TV and give a 1-year warranty on labor and parts.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
experience18 yearsSmartphone repair technician
We reply during working hours
Choose a convenient visit time and describe the symptoms — the technician will prepare for diagnostics. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Нурасыл М.Order No. ZK-8825 · 6 December 2025
oursНужен был ремонт спутникового ресивера — обратился сюда. Симптом был очевидный: зависает. Дамир М подсказал, как продлить жизнь технике. Поставили новую деталь: тюнер. Приехал без записи, приняли как есть. Оплатил картой, чек дали. Даже настройки не сбились, что удивительно.
Тимур И.Order No. ZK-2024/262 · 29 October 2024
oursДо этого обращался в другой сервис, там только развели руками. Диагностика телевизора — с этого всё началось. Основная жалоба — не включается. Деталь на замену — матрица. Сравнивал с двумя другими — здесь вышло ровнее всех. Объяснили по телефону, что можно не везти, но я всё равно привёз. Срок сдвинулся на день, но без последствий. Сказать, что доволен — ничего не сказать.
Марина В.Order No. ZK-8373 · 28 June 2024
oursХотел сначала вызвать мастера на дом, потом передумал. Симптом был очевидный: зависает. Проверили на всех режимах, всё чётко.
Лилия В.Order No. 25349 · 20 January 2023
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Всё оформили по договору, с печатью. Второй месяц — полёт нормальный.
Гаухар Н.Order No. TS-3762 · 8 February 2022
oursПробовал найти мастера в своём районе, но все были заняты. Основная жалоба — зависает. Сделали и забыл про проблему.
Марина В.Order No. TS-5131 · 21 May 2021
oursДолго откладывал ремант, потом всё-таки собрался. Больше всего напрягало: нет сигнала. Уже полгода — ни одного сбоя.
Серик М.Order No. ZK-2020/111 · 23 October 2020
oursҰзақ уақыт бойы жөндеуге беретін жер іздедім. Бөлшектің бар-жоғын бірден тексерді, қоймада бар екен. Алдын ала айтқан уақыттан ерте бітірді. Бағасын алдын ала келістік, соңында өзгерген жоқ. Жұмыс барысын көрсетіп отырды, жасырған жоқ. Ескі бөлшекті қайтарып берді, әдетте олай жасамайды. Ұсынамын, текке ақша алмайды.
Ляззат К.Order No. ZK-2019/786 · 16 May 2019
oursЯ человек терпеливый, но тут уже думал всё. Основная жалоба — не включается. Сделали аккуратно, следов разборки не видно.
Александра Н.Order No. 2018-7742 · 31 December 2018
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Проверили на всех режимах, всё чётко.
Нурасыл М.Order No. TS-1701-421 · 16 November 2017
oursПробовал найти мастера в своём районе, но все были заняты. Диагностика спутникового ресивера — с этого всё началось. Проблема — зависает. Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Позвонили заранее, предупредили, что задержится на полчаса. Могли бы взять больше, но взяли по-божески. В списке работ — тюнер. Техсервис на Абая, если не ошибаюсь, — вот туда и поехал. Сделали аккуратно, следов разборки не видно.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionFirst check the outlet and power cable, then try the button on the TV itself. If there's no response, a technician will find the cause during free diagnostics — often it's the power supply or control board, and those can be fixed at your home.
That means the screen and system are fine, and the issue is with signal reception: the antenna, settings, or tuner. A technician will check the signal source and tuner and tell you whether the unit needs repair or just a channel reset.
Lines usually point to a problem with the matrix, ribbon cable, or board, and the defect can get worse over time. It's better to have a technician look at the TV early so the unit doesn't end up needing a screen replacement.
It depends on the model and the type of failure: sometimes the board can be repaired, sometimes it's easier to replace. A technician will open the TV, check the board, and offer the option that makes the repair reliable.
In most cases, yes: the backlight is replaced separately from the matrix if the matrix itself is intact. During diagnostics, a technician will check what exactly failed and tell you whether replacing the lamps will fix it or another unit is needed.
An intermediary takes your request and passes it to a third-party technician, so they're not responsible for the quality of work or parts. A direct service sends its own technician and gives a 1-year warranty on labor and parts.
Tech Service repairs Haier TVs in Almaty as a direct contractor: our technician arrives at your home within 60 minutes anywhere in the city or picks up the TV for service. Diagnostics are free, there's a 1-year warranty on labor and parts, and the technician quotes the price after diagnostics. We fix LED, LCD, Smart TV, and Android TV models.
Haier TVs break down in ways that group by symptom—from "won't turn on" to stripes on the screen. Based on a single symptom, the technician during diagnostics already narrows down the list of components and brings the right parts.
On a house call, we first check the power supply: in Haier TVs it's most often responsible for startup and powering the boards, and a "dead" TV with the indicator light on is a typical picture of its failure. The second component is the IR receiver: if the set turns on with the buttons on the body but ignores the remote, the problem is in the receiver board or the remote itself, and this is confirmed in a couple of minutes. Our diagnostics are free, and a technician arrives anywhere in the city within 60 minutes, so we determine the cause on the spot rather than by randomly swapping components. This Haier TV repair in Almaty starts with checking the power supply and signal receiver, not with replacing boards. The power supply is repairable: failed capacitors or switching transistors are fixed by replacing specific parts, not the whole board. If the indicator is on but the screen is black, don't keep pressing the remote and buttons—you're wasting time; unplug the TV and wait for the technician so you don't trigger another surge.
When the sound remains but the picture disappears or breaks up into stripes, we check the matrix LED backlight and the ribbon cables: in Haier TVs these are the two most common causes of this symptom. The LED strip behind the screen burns out unevenly over time, and then the picture dims in patches or disappears entirely, even though sound and menu still work. The matrix ribbon cables carry the signal from the board to the screen, and their contact breaks down from heat, dust, or careless transport—then vertical or horizontal stripes appear. The technician tests the strip and checks the ribbon cable seating before quoting the scope of work. Stripes don't always mean the matrix is doomed—if the ribbon cable is damaged, the fix is noticeably simpler, so don't rush to agree to a screen replacement until the technician has checked the contacts.
We most often link spontaneous shutdowns and a "dead" TV after a thunderstorm to the power supply and burnt-out LED strip diodes—after a surge, these components are the first to suffer. In the power supply, the varistor and input capacitors break down, and the pulse travels further along the circuit and reaches the driver. The diodes burn out from overheating: a TV with dust-clogged vents heats up more, and the strip's lifespan shortens. During diagnostics we check both the power circuit and the strip—replacing only the power supply won't bring the picture back if the LEDs have already degraded. If the set shuts down regularly, don't leave it on "to see what happens"—repeated heating cycles finish off the diodes, and instead of a spot repair you may need to replace the entire strip.
Haier doesn't always display a code on the screen—some faults are only visible by the blinking light. Below is a summary of the signals we encounter during diagnostics and the logic the technician uses to choose which component to check.
| Signal | What we check | Common cause | Technician's action |
|---|---|---|---|
| Red light blinking | Power supply, startup circuit | Voltage drop | Continuity test of the power supply |
| Indicator on, screen black | Backlight, motherboard | Burnt-out LEDs | Check backlight and board |
| Code on display at startup | Motherboard | Firmware failure | MainBoard diagnostics |
| Indicator off | Input circuit, fuse | Voltage surge | Check circuit |
| Cyclic rebooting | Power supply, eMMC | Overheating, software failure | Load test |
A blinking red indicator usually points to a faulty power supply or motherboard, and on-site we check both before naming the cause. The logic is simple: the light is powered from the standby circuit, and if voltages sag under load, the board goes into protection and blinks instead of starting. On models with an external adapter, we check its output first; on models with a built-in module, we check the standby circuit and secondary capacitors. Diagnostics are free, so we don't guess by color—we test both units on site. If you need Haier TV repair in Almaty, a technician will check both units and identify the cause. Don't try to "reboot" the TV by unplugging it repeatedly—with a faulty power source, such cycles can damage neighboring components. Our technicians have 4 to 20 years of experience, and over that time we've seen standby protection issues across all model lines.
An error code narrows the search but doesn't show which component failed—the same signal can come from a backlight LED or a chip on the board. In our practice, a Haier display code often matches two different faults: backlight and motherboard power circuit produce similar symptoms and differ only by current measurements and testing the strips. That's why we always confirm the decoding with instruments, not just the light. When talking to a technician, it helps to mention not only the code but also when it appeared—after a thunderstorm, after moving, or on its own; this detail often speeds up the on-site check. Our city call-out takes up to 60 minutes, so we can verify the version the same day.
Android TV models have their own set of failures—stuck on logo, firmware crash, memory chip wear. Let's look at how such recovery differs from servicing a regular LED TV.
In about half of cases, hanging on the splash screen turns out to be a system software failure, and in the rest—wear of the eMMC memory chip, and only diagnostics can tell them apart. This chip stores the smart panel's system and user data: when its cells have exhausted their write resource, the device boots to the logo and stops. A software failure looks the same—the screen shows the splash screen and doesn't load the desktop, while menu sound may remain. During free diagnostics, we read the software version, try service recovery mode, and test memory by writing blocks. We also check the power supply separately: a voltage drop on the processor power bus gives the same picture as a crashed system. If the device hangs after an update, don't rush to replace the board—reflashing often helps, and MainBoard replacement is needed when the storage no longer holds writes.
| Parameter | Standard LED Haier | Haier Smart TV / Android TV |
|---|---|---|
| Typical failures | Backlight, power supply | Plus software glitches, memory wear |
| Diagnostics | Hardware | Hardware and software |
| What we check first | Power and diodes | Power, board, and software version |
| What we need from the owner | TV model | Model and system version |
When the system crashes, we restore the software via service mode, and if the storage no longer holds data, we replace it and flash the image again. Recovery via service mode doesn't require disassembling the board: the technician connects to the port and flashes the correct build for the specific model. Chip replacement is needed when the memory shows write errors during block testing — then a fresh system doesn't last long and the device gets stuck on the logo again. Before flashing, we check the motherboard revision: an image from a different revision causes boot failure and corrupted matrix settings. Our restoration work comes with a 1-year warranty, just like replaced parts. After flashing, it's a good idea to disable auto-update for a while — this reduces the risk of the TV freezing again at the worst possible moment.
Our Haier TV repair follows one scenario — from request to result check. Let's go through the steps and what the owner should do before the specialist arrives.
We repair Haier TVs at home or in the service center: a technician arrives within 60 minutes anywhere in the city, performs free diagnostics, and quotes the price before starting work. On-site, they check the power supply, backlight, and control board, and if it's a typical fault, they fix it on the spot. If the fault requires in-house restoration — for example, backlight or eMMC chip replacement — the device is taken to the service center and returned after testing, so the owner isn't left with unfinished equipment. After the work, you're shown exactly what was replaced, and the device is started up in your presence. There's a 1-year warranty on labor and parts, and payment is accepted in any convenient way. The technician determines the fault and offers a plan of action before picking up the soldering iron.
Haier needs a TV technician who knows the brand inside out. Our specialists have 4 to 20 years of experience and work with LED, LCD, Smart TV, and Android TV. Tech Service is the direct contractor: our own technician comes to your home, not a middleman, so the person who did the work is the one accountable for the result. Quality is easy to check: the set must go through several on/off cycles without freezing or shutting down. If the symptom comes back, that's grounds for a warranty claim, and the same technician handles the repeat visit for the same unit. In my view, it's the combination of an in-house specialist and a 1-year warranty that separates a proper service from a one-off gamble.
Warranty and the economics of the fix are the two things a Haier owner weighs before calling a service. Here's what our warranty covers, when repairs are worthwhile, and what affects the price.
We provide a 1-year warranty on labor and parts: if the same fault recurs due to our work, we fix it under warranty at no extra charge. This covers both the repaired unit and the installed part—for example, the power supply, board, or backlight LEDs. Diagnostics are free, so the owner doesn't pay separately to find the cause. In my experience, most repeat calls aren't about soldering quality but about the wrong unit being diagnosed in the first place. Keep a record of what was replaced—warranty claims go faster when the technician and the owner are talking about the same unit, not "something with the screen."
Repair makes sense when the power supply, backlight, or firmware is faulty and the panel is intact; if the screen is cracked, replacing the panel usually costs about as much as a new TV. The panel is the most expensive component, and replacing it accounts for most of the cost. The power supply, LED backlight, and control board cost far less and are replaced individually, so even an older model can keep running for years after such a repair. What's more, burned-out backlight LEDs produce the same "no picture" symptom as a failing panel—you can't tell them apart from the outside. It's worth finding out the exact cause before deciding: sometimes a "hopeless" TV just has burned-out backlight LEDs, and the repair brings it back to life without replacing the screen.
The technician quotes the price after free diagnostics—it depends on which unit failed, whether a part needs replacing, and whether in-shop repair is required. Diagnostics are free, so the final amount only appears after the cause is identified, not over the phone. Replacing a power supply, working on a board, and replacing a backlight are jobs of different complexity, and you can't lump them into one "average" figure. If the fault requires in-shop repair rather than a home visit, that also affects the total. So it's more honest to give a range after diagnostics rather than an "average price over the phone"—the symptom "won't turn on" can point to the power supply, the backlight, or the board.
The symptoms and error codes you've gathered only form a clear picture after the units are checked. Below is a short summary to help you decide what to do with a faulty TV.
63brands
We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your TV won't turn on, first check the outlet, power cable, and the button on the TV itself—not the remote.
21 November 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read












