Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas stove

Dauscher Gas Stove Repair in Almaty

We come to your home and get your stove working again. Free diagnostics, technician arrives within 60 minutes anywhere in the city.

  • 1-year warranty on labor and parts
  • Technician experience from 4 to 20 years
  • Payment all types

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Jet cleaning or replacementfrom4 000 ₸
  • Gas supply adjustmentfrom4 000 ₸
  • Switches and handles repairfrom4 000 ₸
  • Electric ignition repairfrom4 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Dauscher gas stove faults in Almaty

Below are typical symptoms that gas stove owners report. The technician confirms the exact cause on site.

PricesPricesTECH SERVICE03

How much Dauscher gas stove repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Jet cleaning or replacementparts not included

1–2 hours

from4 000 ₸

Gas supply adjustmentexact price — after the free diagnostics

1–2 hours

from4 000 ₸

Switches and handles repairparts not included

1–2 hours

from4 000 ₸

Electric ignition repairparts not included

1–3 hours

from4 500 ₸

Burner cleaningexact price — after the free diagnostics

1–2 hours

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Dauscher gas stove repair in Almaty

Oven won't ignite from the button

1 visittime

from 4 500 ₸cost

Problem
Dauscher gas stove: the oven stopped igniting from the button — the spark clicked, but the gas did not light.
What we did
The technician removed the bottom sheet of the oven, adjusted and secured the shifted ignition spark plug at the burner, tightened the loose wire contact, and checked the ignition.
Result
The oven ignites from the button, the spark strikes the gas at the burner; work and parts — 1-year warranty.
I want the same
Artel gas stove: oven won't ignite from the button — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Dauscher gas stove repair works at your home in Almaty

Five steps — from your call to checking the stove.

  1. Requestsame day as your call

    Describe the symptom and stove model so the technician brings the right tools.

  2. Access checkby phone

    The technician confirms the model, gas line type, and clear access to the valve so they can bring the right parts.

  3. Inspection and approvalfree

    The technician identifies which components need attention and what parts are required.

  4. Post-reassembly checkafter repair

    The technician checks ignition on all burners, oven operation, and no gas smell after reconnecting.

  5. Care tipsat the end of the visit

    Which habits extend the life of burners and the gas line.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Dauscher gas stove repair in Almaty

Describe the symptom and stove model, pick a convenient visit time — the technician will confirm details and come over.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Dauscher gas stove repair in Almaty

Лилия В.Order No. 134493 · 6 October 2025

ours

Нашёл по отзывам, решил попробовать. Ораз не стал навязывать дорогую запчасть, поставил нормальную. Оформили всё официально, с гарантией. По срокам не подвели. Приняли быстро, объяснили, что и как будет. Сделали ровно то, о чём договаривались. Мастер посмотрел, назвал причину, всё разложил по полочкам. Цену сказали сразу, без «ну потом посмотрим». В целом остался доволен.

Аида Т.Order No. 209155 · 9 December 2024

ours

Обращался в сервис по совету знакомых. Дамир М принял, посмотрел и сразу сказал, что делать.

Руслан Д.Order No. 172159 · 29 March 2021

ours

Искал сервис с гарантией, чтобы не переделывать. Спасибо за работу. Приняли технику, выдали квитанцию.

Вероника П.Order No. 19760 · 9 June 2020

ours

Сервис нашёл случайно, но остался доволен. Работу сделали в тот же день. Буду советовать знакомым.

Станислав К.Order No. ZK-2720 · 26 August 2019

ours

Обращался в сервис по совету знакомых. Пять звёзд, не задумываясь. Мастер посмотрел, назвал причину, всё разложил по полочкам.

Данияр С.Order No. 54304 · 15 May 2019

ours

Нужен был ремонт, искал вариант поближе. Оформили всё официально, с гарантией. Запчасть нашли без проблем. Приняли технику, выдали квитанцию. Не пожалел ни разу.

Артём К.Order No. ZK-7283 · 5 March 2019

ours

Сервис нашёл случайно, но остался доволен. Не пришлось ничего доказывать и просить. Могу рекомендовать)

Айнур М.Order No. TS-8606 · 4 March 2019

ours

Позвонил утром, к обеду уже всё решили. Второй месяц — полёт нормальный.

Станислав К.Order No. 54194 · 16 December 2018

ours

Пришёл по записи, всё прошло спокойно. Про техсервис ничего не знал, просто зашёл по пути. Всё объяснили простыми словами. Перезвонили, когда можно было забирать. Приняли технику, выдали квитанцию. Цену сказали сразу, без «ну потом посмотрим». Не идеально, но честно.

Айгуль К.Order No. 2016-3492 · 28 March 2016

ours

Пришёл по записи, всё прошло спокойно. Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Пользуюсь ежедневно, вопросов нет.

See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Dauscher gas stove repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How do I book a technician to repair a Dauscher gas stove who knows this specific brand?

Submit a request on the website or call us: the dispatcher will ask for the model and the problem, and a technician who works with Dauscher will come to your address. Diagnostics are free, and a visit within the city takes about 60 minutes.

Can I replace my Dauscher gas stove with a new one myself?

Connecting a stove to gas requires checking all connections for leaks, so it's better to leave the replacement to a technician. Without experience and tools, it's easy to cause a leak — that's dangerous for the whole apartment.

Who gets a free Dauscher gas stove replacement, and does the service do it?

There's no such service: we do repairs, not appliance exchanges. Only diagnostics are free — a technician will come, find the cause of the breakdown, and tell you what can be fixed.

What should I do if the flame on my Dauscher gas stove goes out right after I release the knob?

Most likely, the thermocouple or gas control is faulty: they don't keep the valve open. Don't try to fix it yourself — leave diagnostics and replacement of the part to a technician.

Why does the burner on my Dauscher gas stove soot up and the flame is yellow instead of blue?

A yellow flame and soot appear due to a clogged jet, incorrect adjustment, or a drop in gas pressure. A technician will clean the nozzle and adjust the air supply.

Can I replace the thermocouple or gas control in a Dauscher stove myself?

No, these parts are connected to the gas fittings, and doing it yourself risks a leak. Leave the work to a technician — they'll select the right part for your model and check for leaks.

Repair guideArticleTECH SERVICE08

Dauscher gas stove repair in Almaty by a direct contractor

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Dauscher gas stoves in Almaty with our own technician, no middlemen. The technician comes to your home within 60 minutes anywhere in the city or accepts the stove at our service center, diagnostics are free, and you get a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.

Why a Dauscher gas stove won't ignite and goes out

Ignition and flame retention rely on two units — the electric igniter and the thermocouple plus flame failure device pair. Let's break down which one fails and why some jobs aren't for DIY disassembly.

It won't ignite from the electric igniter — can it be fixed on site?

  • Ignition electrode: carbon buildup and moisture on the electrode kill the spark — we clean it and set the gap to the burner.
  • Ignition module: no spark on any burner — we check the power supply and the module itself, not just the electrodes.
  • Wiring: a frayed wire from the button to the electrode causes intermittent ignition — we find the break and replace that section.
  • Burner cap: clogged holes block gas from reaching the spark, so there's no flash even with a working electrode.
  • Air supply: an off mixture prevents ignition — we adjust the air shutter along with cleaning the burner.
  • One burner: if only one burner fails, we don't take the stove to the workshop — the unit is accessible from the working side.

It goes out right after you release the knob — the role of the flame failure device

The flame goes out because the flame failure device doesn't receive a signal from the thermocouple and cuts off the gas supply, so we replace the thermocouple or the safety valve. The thermocouple is a thin sensor that heats up in the flame and generates a small current; while that current flows, the mechanism keeps the gas open. If the flame disappears or the sensor moves out of the heating zone, the safety shuts off in seconds — that's how the leak cutoff works. On Dauscher stoves this unit is on every burner and in the oven, so a knob failure on one burner doesn't always mean the common wiring is broken. Holding the knob longer than usual is pointless: if the sensor has cooled down or is out of the flame zone, the gas won't open, and ignition attempts only fill the oven with gas. If you need Dauscher gas stove repair in Almaty, the technician comes to your home and checks the unit on site. Our experience with this brand ranges from 4 to 20 years among different specialists, and most often replacing the thermocouple and setting it into the heating zone is enough.

Why you shouldn't replace the thermocouple and flame failure device yourself

  • Gas path: the thermocouple and valve are inside the gas section, where disassembly requires checking the joints for leaks.
  • Leak check: after reassembly, the technician checks the joints for leaks — the job isn't done without it.
  • Position in the heating zone: a part set by eye either puts the burner out or disables the leak protection.
  • Part selection: a thermocouple with the wrong length or thread won't fit the Dauscher valve seat.
  • Housing disassembly: the cooktop and oven come apart in a specific order, otherwise the fasteners and casing get damaged.

Yellow flame, soot, and a stiff knob

The flame color and how the knob turns tell you about the condition of the jet and the air supply. Let's see when it's just dirt and when it's about parts and adjustment.

Why the burner soots and the flame is yellow instead of blue

Yellow flame and soot appear when the jet is clogged or the air supply is off, and we adjust the flame through the jet and the air shutter. The jet meters gas into the burner, and the shutter mixes in air: if the jet is clogged or the shutter is misaligned, the mixture becomes too rich and burns with a sooty flame. First the technician removes the burner cap and cleans the burner channels from carbon and grease, then clears the metering hole and sets the shutter by flame height. If the color doesn't return to blue after cleaning, the cause may be gas pressure in the line — then adjusting the stove won't help, and it's fair to say so before any work. Dauscher gas stove repair in Almaty often starts with exactly this kind of cleaning and adjustment. In my view, half of the soot calls are resolved by cleaning without replacing parts.

Stiff or sticking burner and oven knob

  • Burner valve: a stiff knob is usually caused by thickened grease and worn seals inside the valve. We take the valve apart, clean it and check that the gas flows smoothly.
  • Oven valve: we check a sticking oven burner knob separately — the valve works under heat, and the clearance behaves differently than on a hob burner.
  • Valve disassembly: a Tech Service technician takes the Dauscher gas stove apart to reach the valves, inspects the seats and seals.
  • Checking the movement: after reassembly, the knob is turned through its full range — the flame should rise smoothly, without jerks or drops.
  • Force when igniting: forcing a stiff valve speeds up seal wear, and then you get not a stiff knob but an unstable gas supply.

What the technician checks when you complain about the flame

  • Burner and flame spreader: we check the channels for dirt and make sure the spreader sits correctly on the hob burner.
  • Jet: we check the part for clogging and that it matches the type of gas the stove runs on.
  • Air supply: we adjust the air damper for an even blue flame without lifting or soot.
  • Valve: we check the knob movement and smooth gas supply in all modes.
  • Line pressure: we note if the cause is outside the stove — then cleaning the burners and the metering unit won't help.

Error codes and common Dauscher gas stove faults

The code on the panel and the symptom are the starting point for diagnostics. Below is a symptom → unit → technician action link, with the caveat that the decoding depends on the stove model.

How to read an error code on the Dauscher panel

An error code on the Dauscher panel is decoded for the specific stove model, so the same symbol on different series may point to different units. On versions with a display, the combination more often refers to the electric ignition, gas control or the oven temperature sensor, while on models without a screen the code is the indicator blinking after an ignition attempt. Read the sequence: how many times it blinked, after what pause, whether the light was steady or intermittent. A recorded code is more useful than a retelling of "something was blinking": with it the technician understands faster which unit to check first. If the panel shows no symbol and only the indicator blinks, count the number of flashes and the pauses between them — that sequence is enough to narrow down the units even before the technician arrives.

Common Dauscher gas stove faults and what is done about them

SymptomProbable unitTechnician action
Does not ignite from the buttonelectric ignition, spark plugchecks the spark and ignition unit
Goes out after ignitionthermocouple, gas controlreplaces the sensor or valve
Yellow flame and sootjet, air supplycleans and adjusts
Stiff valvehob or burner valvetakes apart and checks the movement
Oven does not heatoven burner and valvechecks ignition and supply

Can a discontinued stove be repaired

We repair a discontinued Dauscher stove unit by unit: the thermocouple, gas control and electric ignition are selected for the specific model. We focus on replacing parts rather than finding a rare board as a whole. The older the model, the more important an accurate description of the unit when you request service — this reduces the risk that the part won't fit and the visit has to be repeated. Disassembly and reassembly of gas stoves on such series is done carefully: fasteners and gaskets lose their elasticity over time, and careless removal of the panel leads to a leak at the connection. We provide a 1-year warranty on labor and parts, so replacing a valve or spark plug on stoves from earlier series remains predictable in terms of obligations.

The stove or the gas line, and what to do if you smell gas

Not every "breakdown" is about the appliance itself: a weak flame and a leak can equally come from faulty equipment or problems with the line. We explain how to tell one from the other and what to do before the technician arrives.

What to do if you smell gas from the stove before the technician arrives

  • Shut off the supply: close the valve in front of the appliance — this is the first thing to do for any persistent smell in the room.
  • Ventilate: open the windows and do not turn on lights, the extractor fan, or any appliances — a spark from a switch is dangerous.
  • Do not light: leave matches and electric ignition buttons alone until the room is fully ventilated.
  • Get out and call: contact the gas service, and then a service center that knows the Dauscher brand.
  • Do not disassemble: do not touch the pressurized assembly; disassembling the fittings yourself will make the leak worse.

How to tell a stove breakdown from a problem with the regulator or riser

We distinguish an appliance fault from a problem with the regulator, hose, or riser pressure by how all the burners behave at once. If a weak flame or smell appears on all burners simultaneously, the cause is more often in the line, not the burner itself. We check the regulator on the cylinder and the hose for cracks, look at the pressure in the riser and the condition of the valve in front of the appliance. One burner with the others lighting normally points to a clogged jet or a misadjusted setting, while a steady blue flame on one burner and failure on the neighboring ones indicates a clog in the supply channel. The technician comes to your home and checks both sections — from the valve to the jet and from the valve to the riser. If the flame is weak on all burners at once, replacing parts won't help — the line is checked first, otherwise the repair turns into a series of useless replacements. The technician quotes the cost of repairing a Dauscher gas stove after a free diagnostic, when it's already clear whether the problem is in the appliance or the line.

How servicing a gas stove differs from a Dauscher gas hob

  • Stove: burners, electric ignition, gas control, oven burner, and oven valve.
  • Hob: burners, valves, electric ignition without the oven unit.
  • Diagnostics: takes longer for a stove — two independent supply circuits are checked.
  • Request: specify the type of appliance, otherwise the technician will arrive with an incomplete set of tools.
  • Warranty: one year on labor and parts applies to both.

How the repair goes and what the free diagnostic includes

Repair starts with a free diagnostic: the specialist goes through the gas components and only then quotes the price. Below is the work order and what exactly is checked during the inspection.

What the technician checks during the free diagnostic

  • Leak tightness: we check the gas connections — apply soapy water to the joints and look for leaks before work.
  • Ignition: we check the electric ignition and spark plug, assess the spark on each burner.
  • Gas control: we check flame retention — hold the knob and see if the burner goes out.
  • Flame: we assess the color and air supply, look for yellow tips and soot.
  • Oven: we check ignition and the operation of the oven burner.
  • Cost: we quote after the inspection — based on the cause found and the parts needed.

At home or at the service center

We service Dauscher gas stoves at your home, and we take the appliance to the service center if the work requires disassembling a unit or if you brought it in yourself. The technician arrives within 60 minutes anywhere in the city, and the on-site diagnostic is free — its results show whether an adjustment will do or a part needs replacing. The home format is more convenient because the stove is not disconnected or transported: the specialist sees it in operation, with the line connected and the standard regulator. For complex disassembly — for example, when a unit is seized and cannot be removed on site — service at the center may be suggested. This option should be discussed before work begins, so as not to transport the appliance twice and to know the scope of disassembly and reassembly in advance. At the service center, the stove is checked without being tied to the kitchen. We follow the same order for Dauscher gas stove repair in Almaty — first diagnostics, then work on the unit. The technician quotes the cost of repairing a Dauscher gas stove after the inspection, once the cause is found.

How the technician determines the right part

A technician comes out and identifies which part is needed for your Dauscher model. The thermocouple, flame failure device, and electric ignition are the components most often checked for these symptoms. The jet is selected based on the model and gas type, and the rating plate on the stove matters here. Giving an accurate description of the symptom and model when you call helps the technician understand upfront which component they'll be working on. We provide a 1-year warranty on labor and parts. In my opinion, it's worth taking a photo of the rating plate and the panel with the error code in advance — photos make it easier to understand what will be needed. A picture of the model and gas type helps the technician verify the part before even coming out. That way the technician knows in advance which component to check first.

Cost, warranty, and choosing a Dauscher technician

The cost depends on the failed component and the scope of work on it, and a technician's competence is clear from the questions they ask before the visit. We give the final price after free diagnostics, once the failed component is identified.

How much does Dauscher gas stove repair cost and when is the price given

  • Cost after diagnostics: we give the final price after free diagnostics, once the failed component is identified.
  • Component matters more than brand: replacing a thermocouple and working on the flame failure device differ in how much disassembly is needed and in leak testing.
  • Disassembly and reassembly: the deeper the component is inside the body, the more time it takes to access it.
  • Checking connections: we test joint tightness separately, and this operation is included in the work on the component.
  • Approval before starting: the technician explains what will be replaced and starts work only with your consent.
  • Final price by component: the amount depends on whether the element is replaced entirely or the component's seating is restored.

What warranty applies to repair and parts

We provide a 1-year warranty on labor and a 1-year warranty on parts. If the problem comes back, it's important to say right away which component was repaired so the technician brings the right part and doesn't waste time on unnecessary diagnostics. Our technicians have 4 to 20 years of experience, and over that time they've worked with various flame failure designs, including components on discontinued models, so they can quickly identify the likely cause from your description. If the problem returns with the same component, mention it when you call — that way the technician knows immediately what to check first. In my opinion, it's important that the technician remembers what work was done on this stove. Before calling back, check whether the flame behavior has changed — that will narrow down the cause.

How to tell a technician knows the Dauscher brand

We're a direct service provider, not an aggregator: our technician with 4 to 20 years of experience comes to your request, and they know Dauscher components, not just general stove breakdowns. A technician arrives within 60 minutes in the city, so they get straight to work on site instead of studying the design as they go. The real sign of competence is the questions a technician asks before the visit: they clarify the model, symptom, and flame behavior, not just the address and time. If they don't ask how the burner behaves and whether it goes out after you release the knob, it's worth checking whether the technician has worked with this brand. For Dauscher gas stoves in Almaty, these clarifications save a whole visit: the technician brings the right part right away. Ask about experience with this specific brand — the answer shows who you're dealing with.

Dauscher gas stove service you can trust

Here's the key information a Dauscher stove owner should keep in mind before calling a technician: from signs of a breakdown to how diagnostics and warranty work.

  • Ignition and flame retention: the flame failure device and thermocouple work together, and replacing them requires checking joint tightness.
  • Flame color: yellow, sooty flames point to the jet and air supply, not the burner itself.
  • Error codes: they're decoded by specific model, so note the code before the technician arrives.
  • Gas smell: first shut off the supply and ventilate, and don't touch ignition or electrical appliances.
  • Diagnostics and warranty: the price is given after free diagnostics, and the warranty on labor and parts is valid for one year.

25brands

Besides Dauscher, we repair other gas stove brands in Almaty

We work with gas stoves from various brands. Choose a brand to open its page and learn about common issues.

We also repairWe also repairTECH SERVICE09

Besides Dauscher gas stove repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Dauscher gas stove repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp