Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas stove

Kaiser Gas Stove Repair in Almaty

We come for diagnostics and repair of Kaiser gas stoves. A technician arrives within 60 minutes anywhere in the city.

  • 1-year warranty on labor and parts
  • Free diagnostics
  • Technician experience from 4 to 20 years

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Jet cleaning or replacementfrom4 000 ₸
  • Gas supply adjustmentfrom4 000 ₸
  • Switches and handles repairfrom4 000 ₸
  • Electric ignition repairfrom4 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Kaiser gas stove faults in Almaty

Below are typical symptoms that our technicians fix. The exact cause and price are given after free diagnostics.

PricesPricesTECH SERVICE03

How much Kaiser gas stove repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Jet cleaning or replacementparts not included

1–2 hours

from4 000 ₸

Gas supply adjustmentexact price — after the free diagnostics

1–2 hours

from4 000 ₸

Switches and handles repairparts not included

1–2 hours

from4 000 ₸

Electric ignition repairparts not included

1–3 hours

from4 500 ₸

Burner cleaningexact price — after the free diagnostics

1–2 hours

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Kaiser gas stove repair in Almaty

Oven won't ignite from the button

1 visittime

from 4 500 ₸cost

Problem
In the Kaiser gas stove, the oven stopped igniting from the button: the spark clicked, but the gas did not light.
What we did
The technician removed the bottom sheet of the oven, positioned and secured the ignition spark plug at the burner, tightened the loose wire contact, and checked the ignition.
Result
The oven ignites from the button again, and the ignition works steadily.
I want the same
Artel gas stove: oven won't ignite from the button — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Kaiser gas stove repair works at your home in Almaty

Five steps from request to checking the stove's operation.

  1. Requeston the day of request

    You place a request, the technician clarifies the model and symptom to bring the right tools.

  2. Technician visitwithin 60 minutes

    The technician arrives at the address in Almaty, inspects the stove and connection conditions.

  3. Diagnosticsfree

    The technician identifies the cause and offers solutions — on-site repair or unit replacement.

  4. Approval and repairafter approval

    The technician shows the worn part and offers an original or compatible analog.

  5. Checkafter repair

    The technician starts the burners and oven, demonstrates operation and explains what to check when starting.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Kaiser gas stove repair in Almaty

If the stove won't ignite or smells of gas, tell us right away — the technician will come first. Diagnostics are free, 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Kaiser gas stove repair in Almaty

Томирис Ж.Order No. 698907 · 14 August 2026

ours

Первый раз сюда, до этого чинился в другом месте. Могу рекомендовать. Цену сказали сразу, без «ну потом посмотрим».

Игорь Щ.Order No. 252504 · 24 August 2022

ours

Нашёл по отзывам, решил попробовать. Пять звёзд, не задумываясь. Не пришлось ничего доказывать и просить.

Игорь Щ.Order No. TS-2204-593 · 17 July 2022

ours

Сервис нашёл случайно, но остался доволен. Цена имела значение, но и гарантия тоже. С чистой совестью советую.

Станислав К.Order No. TS-2207-190 · 15 June 2022

ours

Выбирал между несколькими сервисами, остановился на этом. Цену сказали сразу, без «ну потом посмотрим». Пять звёзд, не задумываясь.

Ольга М.Order No. 2021-3578 · 24 September 2021

ours

Первый раз сюда, до этого чинился в другом месте. Сергей Москоленко всё объяснил и не пытался впарить лишнее.

Максим Ю.Order No. 663820 · 16 October 2019

ours

Позвонил утром, к обеду уже всё решили. Всё объяснили простыми словами. Оформили всё официально, с гарантией. В целом остался доволен.

Мадина Т.Order No. TS-1896 · 18 April 2019

ours

Обращаюсь не первый раз, поэтому есть что сказать. Единственое — ждал запчасть четыре дня.

Эльвира Д.Order No. 524362 · 17 April 2019

ours

Нужен был ремонт, искал вариант поближе. Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. По срокам не подвели. Перезвонили, когда можно было забирать. Приняли технику, выдали квитанцию. Для Алматы — достойный вариант

Алия Ш.Order No. ZK-2017/980 · 22 December 2017

ours

Долго откладывал, но пришлось обратится. Техсервис в Алматы, если что, вот их адрес — не пожалел.

Эльвира Д.Order No. ZK-7840 · 28 November 2016

ours

Выбирал между несколькими сервисами, остановился на этом. Спасибо за работу.

See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Kaiser gas stove repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How do I fix a gas stove?

First, turn off the gas and ventilate the kitchen, then call a technician. You can only inspect the external parts yourself; gas components are repaired by a specialist after free diagnostics.

Can I clean the burners on a Kaiser gas stove myself, or is it better to call a technician?

It's best not to touch the burners yourself—it's easy to damage the calibrated openings. A technician will clean them with a special tool and check the gas supply to the burners.

I have a Kaiser stove; the burner clicks but doesn't ignite. Is it the electric ignition or something with the gas?

Clicking means the electric ignition is sparking, but the mixture isn't igniting. The cause could be a clogged burner, low pressure, or a faulty spark plug; diagnostics will show more precisely.

How can I tell if the gas supply valve is broken rather than the burner itself?

If the neighboring burners burn normally but this one doesn't ignite when the knob is open, the valve is likely the issue. A technician will determine the exact cause when inspecting the unit.

On my Kaiser stove, the timer and electric ignition don't work at the same time. Are these related failures?

Often both functions are powered by the same control board, so an ignition failure also affects the timer. A technician will check the circuit and determine which module to replace.

What should I do if I smell gas from the oven of a Kaiser gas stove while the burners are on?

Immediately turn off the gas, ventilate the room, and do not turn on electrical appliances. Call a technician: they will check the oven connections for leaks and fix the leak.

Repair guideArticleTECH SERVICE08

Kaiser Gas Stove Repair in Almaty by Tech Service Technicians

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Kaiser gas stoves in Almaty: our technician comes to your home or the stove is repaired at our service center. Diagnostics are free, we arrive within 60 minutes anywhere in the city, and there is a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Why Your Kaiser Stove Won't Ignite and Keeps Going Out

Most Kaiser gas stove "breakdowns" come down to a few components: the electric igniter, thermocouple, nozzles, and valve. We break it down by symptom so you know where to look for the cause.

It Clicks but Won't Ignite

If the igniter clicks but the burner doesn't light, the spark is there but isn't igniting the gas. The cause is the spark plug, its position, or moisture left after washing. The ignition plug sits above the burner with a gap of a few millimeters, and if it shifts or gets coated with grease, the spark goes sideways instead of into the gas stream. The nozzle may be clean and the gas supply working, but the mixture won't ignite. On Kaiser stoves, the plugs are mounted on a common bar, and when you remove the grates for cleaning, it's easy to shift the bar by a couple of millimeters. Moisture on the ceramic gives a similar picture: frequent clicks, weak and pale spark. Let the unit dry completely—dampness on the plug causes constant clicking and a weak spark, and this is the most common "breakdown" that fixes itself. If ignition still doesn't appear after drying and inspecting the plug, Kaiser gas stove repair in Almaty starts with checking the ignition circuit and gas supply.

Burner Goes Out Right After Ignition

If the flame goes out a few seconds after ignition, the gas control thermocouple is almost always to blame—it doesn't "see" the fire and shuts off the gas. The flame sensor sits next to the burner, and the flames must wash over its tip for the gas valve to stay open. An oxidized thermocouple contact, carbon buildup on its tip, or a shift away from the flame all give the same result: the valve closes a few seconds after you release the knob. The gas supply valve isn't the issue here—fuel is flowing, ignition happens, and it goes out afterward. The thermocouple needs to heat up in the flame for 3-5 seconds, so you hold the knob down—if that doesn't help either, it's time to replace the sensor or its contact.

Yellow Flame and Soot

A yellow, sooty flame instead of blue means incomplete gas combustion—most often due to clogged nozzles or a shifted flame spreader. Blue flames with a even contour indicate the correct gas-to-air ratio; yellow with soot means the mixture is too lean or air isn't mixing in. Burner nozzles get clogged with grease and small particles over months of cooking, and the flame spreader, when removed for washing, can sit back crooked—sending the fire to one side. On Kaiser burners, the spreader is heavy cast iron, and a loose fit on the locating pins immediately changes the combustion pattern. Soot on the bottom of a pot is an early signal: while the flames are yellow, soot deposits on both the burner and cookware, and fuel consumption rises.

Error Codes and Timer

On Kaiser gas stoves, error codes relate to the timer and ignition electronics, not the gas part—the code tells you about a board or sensor fault, not fuel supply. The electronic module controls the timer, backlight, and ignition unit, while the burners run off a separate gas assembly, so a code on the display and no flame are often two different stories. The control knobs turn freely, fuel flows, but ignition is silent. If the timer and electric ignition "died" at the same time, look for a common power source—the battery compartment or ignition unit—rather than two separate breakdowns. In such cases, the technician checks the power circuit during free diagnostics and only then draws a conclusion about the board.

What to Do If You Smell Gas

A gas smell near the stove isn't the kind of breakdown to diagnose yourself. Below is a safe procedure and how a technician finds the source.

Steps to Take If You Smell Gas

  • Turn off the gas: close the valve on the stove and on the gas line to it — this stops the flow of gas into the room.
  • Ventilate: open the windows and don't turn on lights, the extractor fan, or appliances — a spark from a switch is dangerous too.
  • Don't light a flame: no matches, lighters, or switches — don't test the problem with fire.
  • Get out and call: from a safe place, call the gas service and a technician, and don't return to the kitchen until they arrive.
  • Check with soapy water: only after ventilating, apply foam to the connections — growing bubbles indicate a leak.
  • Don't blow out the stove: gas accumulates near the floor and won't dissipate by venting the burners, and since gas is heavier than air, it stays low.

How a technician finds a leak

Our technician checks the tightness of gas connections with soapy water and inspects the valves, hose, and joints — where faults most often hide. The supply valve on the gas line and the flexible hose are checked first: rubber and braiding age from heat and kinks, and a crack in them causes a smell before the burner itself wears out. Then threaded joints on the body, the integrity of the flame spreaders, and the fit of the jets are checked — gas can also escape into the room through a loose nozzle instead of burning. An experienced technician distinguishes the smell from a working burner from a steady leak at a joint by intensity and location. We provide this diagnostics free of charge, a technician visit takes 60 minutes within the city, and we give a 1-year warranty on labor and parts. Leaks don't only happen in the appliance: the gas line ages faster, so checks start there, not with the burners.

What you can check yourself before calling a technician

Some 'breakdowns' can be fixed without a technician, but gas stoves have a clear line you shouldn't cross. Here's what's safe to do yourself and where to stop.

Safe checks you can do yourself

  • Dry the ignition spark plug: moisture from washing is a common cause of constant clicking from the electric ignition — just wipe it dry and let it sit.
  • Check the battery: in the ignition compartment, it drains unnoticed and the spark weakens gradually, so a new battery often restores ignition.
  • Remove and wash the grate and flame spreader: carbon buildup on the flame spreader prevents even gas flow, causing the flame to turn yellow and soot.
  • Inspect the hose: cracks and hardened rubber are immediately visible, but that's already a reason not to touch the stove and to call a technician.
  • Check that the burner jets are dry: during washing, water gets into the holes, and the burner won't catch flame until completely dry.
  • Make sure the grate is level: a tilt presses on the burner and disturbs the flame, even if the part itself is fine.

Where the DIY zone ends

You shouldn't disassemble valves, jets, or the gas control yourself — that requires dismantling the gas part and checking tightness after reassembly. Burner jets meter the gas supply, the gas valve shuts off the flow, and the gas control cuts it off when the flame goes out — each of these components works under pressure, and any under-tightened thread becomes a leak. In our practice, stoves are most often 're-treated' when the owner has tightened a connection without checking the joint. Even if a jet is simply clogged, cleaning it is finished with pressure testing of the joints — without this check, a 'repaired' stove is more dangerous than a broken one. If self-checks don't help, you need gas stove repair in Almaty — this work is best left to a technician. Our technician with 4 to 20 years of experience always blows out and checks connections rather than just replacing a part, and after such a check the stove goes back to the owner leak-free.

Repair or replace an old stove

If one component fails on an old Kaiser stove — the thermocouple, valve, or ignition — it's usually repaired rather than replaced. The thermocouple keeps the valve open while the flame is burning, and replacing it eliminates the burner going out right after ignition; the gas supply valve and electronic ignition are also replaced individually, without replacing the entire stove. The burners remain functional, and the body and grate continue to serve. Almaty residents often ask whether it's easier to just get a new one — in our experience, one part is cheaper and simpler than transporting and connecting a new appliance. Replacing the stove makes sense when several burners and the body have burned through: fixing one component then doesn't pay off for the next breakdown.

How a Kaiser gas stove repair works

Our Kaiser gas stove repair is built around a home visit, free diagnostics, and a warranty. Here's how the process works and what parameters you can expect when you contact us.

Home visit and free diagnostics

The technician arrives at your home within 60 minutes anywhere in the city, and gas stove diagnostics are free — based on the results, they quote the price and agree on the work. The visiting technician inspects the stove on site: checks ignition, flame behavior, knob movement, and the condition of connections. If the breakdown requires disassembly or a rare component, we discuss the work at the service center. It's worth showing all symptoms at once during the inspection — clicking during ignition, smell, how the flame behaves when turning the knob. From this picture, the technician narrows down the components before disassembly: for example, steady burning followed by going out often points to the thermocouple rather than the valve. The 1-year warranty covers both labor and parts, so the diagnostic result is recorded before work begins.

What diagnostics and repair include

ComponentWhat we checkWhat we do
Electronic ignitionspark, spark plug, powercleaning, spark plug replacement
Thermocouplereaction to flamesensor replacement
Nozzles and burnersflame evennesscleaning, adjustment
Gas supply valvesknob movement, tightnessvalve replacement
Connections and hoseleaktightness check

Warranty and payment

We provide a 1-year warranty on labor and parts, and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies — the technician quotes the price after free diagnostics. A warranty on a part is no less important than on labor: if a new component behaves like the old one, it's handled under warranty, not paid for again. That's why the order includes exactly the part confirmed by diagnostics, not the first one that fits the model. Technicians with 4 to 20 years of experience know which Kaiser components fail more often and what to look for on a repeat visit. If after the work the flame behaves differently than expected, show the technician a recording of the ignition — that makes it faster to understand whether it's the component or a setting.

How the gas part of a Kaiser stove differs from an electric one

A Kaiser gas stove has components that an electric one doesn't, and its own care requirements. Here's the difference and what extends the appliance's service life.

Components not found in an electric stove

A Kaiser gas stove adds a gas part and a safety system to the usual electrics — nozzles, valves, thermocouple, and gas control — and they fail differently. Nozzles meter the gas supply to each burner, the valve opens and shuts off the flow, the thermocouple monitors the flame, and gas control cuts off the gas if the fire goes out. An electric model has none of this: heating is set by the heating element and thermostat, and the role of flame is played by a coil or heating element. Hence the different behavior after a breakdown: a gas burner may click without igniting, go out, or produce a yellow flame, while the electric part continues to work properly. So "not heating" in gas and electric appliances are different breakdowns: with a gas stove, they first look at the flame and supply, not the heating element.

Kaiser gas stove maintenance

  • Clean the burners and flame spreader: carbon buildup prevents an even blue flame and causes soot on cookware, so remove the parts and wash them after they cool.
  • Don't flood the igniter: after washing, dry the spark plug before turning it on, otherwise it clicks uselessly and stops igniting the gas on the first try.
  • Watch the flame color: a yellow tint is a reason to clean the nozzles and check the gas supply; a blue flame means the mixture is correct.
  • Check the hose: cracks in the rubber are a common cause of leaks, inspect it regularly and don't pinch it during cleaning.
  • Wash the grate separately: remove it before cleaning so water doesn't get into the burners or onto the ignition spark plug.
  • Keep the nozzles dry: liquid inside changes the mixture, and the burner starts to soot or go out at low pressure.
  • Protect the flame spreader from chips: enamel and cast iron crack from sudden cooling, so don't put hot parts under cold water.

Kaiser gas stove service and its benefits

We've gathered what helps a Kaiser stove owner quickly identify the problem: from the first symptoms to the point where DIY ends and the technician's work begins.

  • The symptom points to the component: clicking without a flame indicates the igniter, going out after releasing the knob points to the thermocouple, and a yellow flame means clogged nozzles.
  • Gas smell is a stop signal: turn off the valve, ventilate the kitchen, don't turn on electrical appliances, and call a technician.
  • Do it yourself only for safe tasks: wipe the grate, dry the ignition spark plug, replace the battery; leave the gas part to a specialist.
  • The gas part is different from electrics: nozzles, valves, and gas control require leak testing after any intervention.
  • Prevention is cheaper than repair: clean burners and a dry igniter delay thermocouple failure and nozzle clogging for months.

25brands

Besides Kaiser, we repair other gas stove brands in Almaty

We service Kaiser gas stoves with and without a rotisserie, including series with a grill and multifunctional oven.

We also repairWe also repairTECH SERVICE09

Besides Kaiser gas stove repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Kaiser gas stove repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp