experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free — the technician identifies the cause and gives you the price on site.
Our own technicians4 to 20 years of experience




Repair prices
The symptoms Artel stove owners most often report. The technician confirms the exact cause on site.
clogged nozzle, no gas supply
from4 000 ₸
thermocouple, clogged burner, poor contact
from4 500 ₸
electrode, wiring, ignition module
from8 000 ₸
incorrect adjustment, clogged nozzles
from4 000 ₸
clogged burner, incorrect flame
from4 500 ₸
worn valve, dirty mechanism
from8 500 ₸
hose, connection, supply valve
from4 000 ₸
clogged burner, incorrect air-fuel mixture
from4 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4,500 ₸cost

BeforeAfter5 steps

From request to checking the stove — five clear steps.
You describe the symptom, the technician confirms the stove model and schedules the visit.
A technician arrives within 60 minutes anywhere in the city — with their own tools.
The technician checks the connection and identifies the cause before starting work.
The technician cleans up the workspace and takes away the removed part.
You receive a document confirming the work and warranty; ask the technician about the terms.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the fault and the stove model. The technician will arrive with the right tools, check the connection and identify the cause.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Анна Т.Order No. 2026-9266 · 15 September 2026
oursДолго откладывал, но пришлось обратиться. Отдельно скажу про мастера: Максим Снегирев — спокойный, без лишней суеты. Пять звёзд, не задумываясь.
Зарина Ш.Order No. 50129 · 30 August 2026
oursПозвонил утром, к обеду уже всё решили. Поломка застала перед командировкой, тянуть было нельзя. Работали аккуратно, ничего не поцарапали. Цену сказали сразу, без «ну потом посмотрим». Оформили всё официально, с гарантией. Дали гарантию и рекомендации на будущее. Приняли технику, выдали квитанцию. Проверили при мне, показали результат. Перезвонили, когда можно было забирать. Однозначно да!!
Серик М.Order No. TS-2610-878 · 3 July 2026
oursОбращался в сервис по совету знакомых. Роман Мигунов честно сказал, что менять, а что ещё походит. Рекомендую!!
Сауле Н.Order No. TS-9573 · 19 April 2024
oursПервый раз сюда, до этого чинился в другом месте. Друг посоветовал, у него похожая история была. Мастер посмотрел, назвал причину, всё разложил по полочкам. Приняли технику, выдали квитанцию. Перезвонили, когда можно было забирать. Проверили при мне, показали результат. Для Алматы — достойный вариант.
Зарина Ш.Order No. 2022-5177 · 16 April 2022
oursОбращался в сервис по совету знакомых. Дамир М взялся за то, от чего другие отказались!!
Малик Т.Order No. 995707 · 19 February 2017
oursПозвонил утром, к обеду уже всё решили. Цена имела значение, но и горонтия тоже. Никита М снял деталь, показал износ, вопросов не осталось. Перезвонили, когда можно было забирать. Починили и дали гарантию на месяц
Игорь Щ.Order No. TS-1710-330 · 12 January 2017
oursОбращаюсь не первый раз, поэтому есть что сказать. Всё объяснили простыми словами. Цену сказали сразу, без «ну потом посмотрим». Работу сделали в тот же день. Спасибо за работу
Алексей Г.Order No. ZK-5537 · 15 October 2016
oursПришёл по записи, всё прошло спокойно. Мастер посмотрел, назвал причину, всё разложил по полочкам. В общем, доволен.
Ирина Т.Order No. ZK-9527 · 3 October 2016
oursСервис нашёл случайно, но остался доволен. Поломка застала перед командировкой, тянуть было нельзя. Приняли быстро, объяснили, что и как будет. Оформили всё официально, с гарантией. Работали аккуратно, ничего не поцарапали. Мастер посмотрел, назвал причину, всё разложил по полочкам. Не идеально, но честно.
Лилия В.Order No. 898003 · 21 May 2016
oursСервис нашёл случайно, но остался доволен. В общем, доволен. Всё объяснили простыми словами.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionThere's no clear winner: Artel and other brands differ in their components and parts availability. Before buying, look at the flame failure device, electric ignition, and how easy it is to find consumables for the specific model.
In the budget segment, go for a model with a flame failure device and simple electric ignition: these components break more often but can be repaired. Artel is common in this class, so parts and technicians for it are easier to find.
Yes, we repair Artel stoves even after the factory warranty. A technician will come to your home, run diagnostics, and fix the issue, and we'll give a 1-year warranty on labor and parts.
Yes, it's dangerous: the flame failure device cuts off the gas supply if the flame goes out; without it, gas can leak into the room. Until it's repaired, don't use the faulty burner or oven, depending on the model.
Yes, these components can be replaced separately, but the part must match the specific Artel stove model. The technician will determine what exactly has failed and replace the needed element.
No, disassembling a gas stove yourself is dangerous: you can damage the seals and break the gas lines' tightness. For diagnostics and ignition repair, it's better to call a technician.
Tech Service repairs Artel gas stoves in Almaty both on-site and at the service center with its own technicians who have 4 to 20 years of experience. Diagnostics are free, the technician arrives within 60 minutes anywhere in the city, and we provide a 1-year warranty on labor and parts. The technician quotes the price after diagnostics.
The most common complaints from Artel owners are that the burner doesn't light on the first try, the flame goes out in the oven, or there's no spark. Let's look at which component is responsible for each symptom.
Most often the culprit is a dirty ignition plug or a misaligned burner cap — the spark is there but doesn't reach the gas-air mixture. The ignition plug sits next to the burner and over time gets coated with carbon from grease and spilled food: the spark travels along the carbon instead of into the fuel. After washing, the burner cap is often put back shifted by a couple of millimeters — the holes don't line up with the nozzle, and the fuel comes out away from the spark. The electric ignition itself is working and clicks as usual, so the owner looks for the cause in the wrong place. If the spark jumps but the mixture doesn't ignite, you need to check not the electrode but whether the cap holes line up with the burner — after washing they're often put back shifted. If a DIY check doesn't help, it's easier to leave Artel gas stove repair in Almaty to a technician who comes to your home.
A code on the display narrows the search but doesn't replace an inspection: here's how a technician goes from symptom to the specific stove component.
We go from symptom to component: check the spark, the thermocouple signal, the tightness of connections, and only then name the part to replace. The technician explains how much Artel gas stove repair costs after the inspection — when the cause is already clear. First the technician removes the grate and assesses the condition of the plug, then measures how quickly the thermocouple holds the valve after ignition, and applies soapy water to the supply joints to rule out a leak. Gas stove diagnostics are built step by step: from simple to complex, without taking the whole body apart. Checking the tightness of connections is a separate step — if there's a smell at the supply, the joints are tightened and the seals replaced first. Nozzles and jets are inspected against the light: a clogged channel gives a weak or yellow flame. The right order of checks saves money — often cleaning the jets and adjusting is enough, not replacing the ignition unit.
| What we check | How the fault shows up | What we do |
|---|---|---|
| Ignition and spark plug | no spark or weak spark | clean, adjust, replace the spark plug |
| Thermocouple and gas control | flame goes out after 3-5 seconds | check the signal, replace the thermocouple |
| Leak-tight connections | gas smell near the supply line | tighten, replace seals |
| Jets and burners | weak or uneven flame | clean the jets, adjust |
| Oven and thermostat | doesn't hold temperature | check the thermostat and seal |
To understand what the technician will say, it helps to know the role of key components — the thermocouple, gas control, electric ignition, and jets. Let's look at what each part does and why its failure produces a specific symptom.
The thermocouple sends a signal, and gas control cuts off the fuel supply if the flame goes out — these two safety components work together. The thermocouple sits in the burner flame area and generates a small voltage when heated; while the signal is present, the gas control valve keeps the line open. The flame goes out — heating stops — the valve closes within seconds and cuts off the supply. On Artel stoves this pair is fitted to every burner and the oven, so the symptom "hold the knob and it burns, let go and it goes out" almost always points to the thermocouple or valve, not the gas line itself. The technician quotes the cost of Artel gas stove repair after the free diagnostics, once it's clear which component has failed. If gas control is faulty, using the stove is dangerous: fuel keeps flowing with the flame out, so this work isn't put off.
Let's go through on-site repair step by step — from request to checking the stove after the work — and the cases when a component is replaced at the service center.
We run free diagnostics on site, find the faulty component and get your stove working again — either at your home or, for complex cases, at our service center. Artel gas stove repair in Almaty starts with exactly this kind of check, and its results show what needs to be replaced. Diagnostics for an Artel gas stove includes checking the gas control, electric ignition and burners: we take the unit apart, test the ignition spark plug and check the thermocouple's response. Replacing the thermocouple, adjusting the ignition and cleaning the jets are done right in your kitchen — these are standard field technician operations. If the problem affects the gas manifold or the body, the unit is taken to our service center, where we have the conditions for disassembly. Complex cases at the service center carry the same warranty as on-site work. In our experience, most requests are resolved at the customer's home in a single visit — complex cases go to the service center so we don't have to disassemble the appliance in your kitchen.
Built-in and freestanding Artel stoves differ in how easy it is to access their components: built-in models are harder to reach the gas control and gas supply connections. On a freestanding model, we remove the grates, lid and cooktop, and the gas supply stays visible — access to the thermocouple and ignition spark plug is immediately open. On a built-in Artel gas stove, the body is fixed into the countertop, so sometimes it needs to be partially pulled out of the opening to reach the gas control and supply connections. This affects the time needed but not the set of checks: diagnostics, component replacement and leak testing are performed the same way. In my opinion, owners of built-in models should specify the installation type when booking — that way the technician arrives with the right fasteners and doesn't waste the visit on adjustments.
We answer the three questions owners ask most often: what the work warranty covers, whether an Artel stove can be serviced after the factory warranty, and what the payment consists of.
We provide a 1-year warranty on labor and parts — if your Artel stove acts up again after service, we'll sort it out under warranty. The term applies both to the replaced component and to the technician's work itself: a thermocouple, ignition spark plug or burner jet installed by us stays under our control for the whole year. The technician quotes the cost of Artel gas stove repair after free diagnostics — before any work begins. Our technicians have been working with this brand for 4 to 20 years, so they check typical combinations like "new part plus old wiring" right during installation. The warranty covers both the component and the technician's work, so you don't need to figure out separately what exactly failed: on a repeat visit we inspect the entire mechanism, not just the element that was replaced.
A gas stove isn't the kind of appliance you should try to fix yourself. Let's look at the risks of taking it apart on your own and what to do if you smell gas indoors.
If you smell gas, shut off the supply, ventilate the room, don't turn on electrical appliances, and call a technician. First, turn the valve on the supply line to the stove to the closed position, open the windows, and don't touch switches, sockets, or doorbells — a spark from contact can ignite the mixture. A gas smell on a new Artel stove is often due to a loose connection rather than the body itself: a loose union nut, an old gasket, or a hose past its service life causes the very leak the owner is looking for inside the appliance. So you need to check the connections on the supply line, not take the panel apart. The technician checks the tightness of gas connections along the entire line — from the valve to the burners — by applying soapy water to each joint and pressure-testing. The cost of gas stove repair is quoted by the technician after free diagnostics.
Here are the key things an Artel appliance owner should keep in mind before calling a technician: from common causes to safety rules when working with gas.
25brands
Gas stoves are one of the categories our technicians work with. Choose a brand to open its page.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read












