Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas stove

Hansa Gas Stove Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Technician experience from 4 to 20 years

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Jet cleaning or replacementfrom4 000 ₸
  • Gas supply adjustmentfrom4 000 ₸
  • Switches and handles repairfrom4 000 ₸
  • Electric ignition repairfrom4 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Hansa gas stove faults in Almaty

Below are frequent symptoms and their likely causes. The technician will determine the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much Hansa gas stove repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Jet cleaning or replacementparts not included

1–2 hours

from4 000 ₸

Gas supply adjustmentexact price — after the free diagnostics

1–2 hours

from4 000 ₸

Switches and handles repairparts not included

1–2 hours

from4 000 ₸

Electric ignition repairparts not included

1–3 hours

from4 500 ₸

Burner cleaningexact price — after the free diagnostics

1–2 hours

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Hansa gas stove repair in Almaty

Low yellow flame and soot on the burner

1 visittime

from 4 000 ₸cost

Problem
On the Hansa gas stove, the flame of one burner was low and yellow, and it was sooting the bottom of the cookware.
What we did
The technician removed the flame spreader and the burner, unscrewed the old jet, installed a new one for mains gas and adjusted the flame.
Result
The flame became even and blue, and soot no longer appears on the cookware. 1-year warranty on the work and on the parts.
I want the same
ARG gas stove: low yellow flame and soot on burner — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Hansa gas stove repair works at your home in Almaty

Five steps from request to checking the stove's operation.

  1. Requeston the day of request

    We take your request and clarify the symptom, stove model, and address.

  2. Technician visitwithin 60 minutes

    The technician arrives anywhere in the city, inspects the stove and connections.

  3. Approvalbefore repair

    The technician agrees on the list of work and parts with the owner before starting the repair.

  4. Reassemblyafter replacement

    Checking the connections for leaks after reassembling the stove.

  5. Checkafter repair

    Checking burner flames and electric ignition after repair, 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Hansa gas stove repair in Almaty

Clear access to the stove and gas valve, remove dishes and items near the stove — this helps the technician start the inspection and diagnostics faster.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Hansa gas stove repair in Almaty

Виктор Ф.Order No. 2026-8417 · 7 January 2026

ours

Нужен был ремонт, искал вариант поближе. На звонок ответили не с первого раза. Спасибо за работу.

Лилия В.Order No. TS-2403-944 · 20 June 2024

ours

Сервис нашёл случайно, но остался доволен. Цена имела значение, но и гарантия тоже. Цена не изменилась ни на тенге. Дали гарантию и рекомендации на будущее. По срокам не подвели. Перезвонили, когда можно было забирать. Всё объяснили простыми словами. Работали аккуратно, ничего не поцарапали. Хороший сервис, побольше бы таких.

Андрей П.Order No. 75697 · 8 December 2022

ours

Первый раз сюда, до этого чинился в другом месте. Друг посоветовал, у него похожая история была. В помещении тесновато, но это мелочи.

Серик М.Order No. ZK-2437 · 20 November 2022

ours

Нужен был ремонт, искал вариант поближе. Спасибо за работу. Всё объяснили простыми словами.

Роман З.Order No. ZK-2022/787 · 29 September 2022

ours

Нужен был ремонт, искал вариант поближе. Очередь была, посидел минут двадцать.

Алмас Д.Order No. ZK-2022/205 · 11 May 2022

ours

Пришёл по записи, всё прошло спокойно. Было подозрение, что дело в плате, хотелось услышать второе мнение. Цену сказали сразу, без «ну потом посмотрим». Оформили всё официально, с гарантией. Приняли технику, выдали квитанцию. Дали гарантию и рекомендации на будущее. Работу сделали в тот же день. Не пришлось ничего доказывать и просить. В общем, доволен.

Артём К.Order No. TS-6195 · 29 June 2021

ours

Пришёл по записи, всё прошло спокойно. До этого обращался в другой сервис, там только развели руками. Сервис нормальный, обращусь ещё)

Дамир И.Order No. 547537 · 7 November 2020

ours

Позвонил, когда техника встала окончательно. Нужен был счёт и чек, у нас техника на балансе организации. Перезвонили, когда можно было забирать. Проверили при мне, показали результат. Приняли быстро, объяснили, что и как будет. Работу сделали в тот же день. Диагностика заняла минут двадцать. Спасибо, выручили.

Дамир И.Order No. TS-1911-610 · 17 August 2019

ours

Нашёл по отзывам, решил попробовать. Техника на гарантии уже не была, так что выбор был свободный. Никита М честно сказал, что менять, а что ещё походит. Однозначно да)

Нурлан Б.Order No. TS-1918 · 27 March 2019

ours

Обращался в сервис по совету знакомых. Приняли технику, выдали квитанцию. Приняли быстро, объяснили, что и как будет. В целом остался доволен.

See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Hansa gas stove repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Which brand of gas stove is better to buy?

There's no clear leader: Hansa is a popular brand with affordable parts, so people often choose it and repair it. When buying, look at whether service and parts are available in your city, not just the price.

What should you pay attention to when buying a gas stove?

Check the ignition type and gas control, the material of the grates and how convenient the burners are, and also the availability of parts for the model you choose. Safety matters for a gas stove: a thermocouple and a safety shut-off.

Which gas stove is the best?

The best stove is the one that fits your needs and has service support in your region. For gas models, what matters is reliable gas control, convenient ignition, and availability of parts, not just the brand.

How can you tell if the thermocouple has failed on a Hansa gas stove rather than the electric ignition?

If there's a spark but the flame goes out as soon as you release the knob, it's usually the thermocouple or gas control. When there's no spark at all or it clicks without igniting, the spark plug and ignition unit are checked — a technician will determine exactly during diagnostics.

What happens if you keep using a Hansa gas stove with a faulty gas control?

Gas control cuts off the gas supply when the flame goes out, and if it's broken, gas can flow into the room without burning. That's a risk of leak and poisoning, so it's better not to use the stove until the technician arrives.

Can a Hansa gas stove be fixed without replacing the unit, just by cleaning or adjusting?

Some issues can be solved by cleaning the burners and jets or adjusting the gas supply, without buying parts. Replacement is needed when the unit is damaged — for example, a punctured thermocouple or a worn gas valve; it depends on the model.

Repair guideArticleTECH SERVICE08

Hansa gas stove repair in Almaty with a technician dispatched within 60 minutes

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Hansa gas stoves in Almaty at your home or in the service center. A technician arrives within 60 minutes anywhere in the city, diagnostics are free, and there's a 1-year warranty on labor and parts. The specialist gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer.

Why a Hansa stove won't ignite and goes out when you release the knob

If the burner doesn't catch the flame or goes out as soon as you release the knob, it's almost always the thermocouple + gas control combo or the electric ignition. Let's break down how these two components differ.

How the thermocouple and gas control keep the flame burning

The thermocouple is a flame sensor that heats up from the burner and keeps the gas control valve open: when you release the knob, the valve closes if the sensor hasn't warmed up. This component sits in the flame zone, its junction touches the burner flame, and the signal travels through a wire to the solenoid valve that cuts off the gas supply if control is lost. Normally, warming up takes a few seconds, and you hold the knob down during that time. A failure produces three typical patterns: the junction is dirty and doesn't sense the flame, the wire contact is oxidized, or the part itself has worn out and produces a weak signal. If the burner goes out 3-5 seconds after you release the knob, the issue is with the thermocouple and its contact, not the gas supply—holding the knob longer won't help; the component is already faulty. If you need Hansa gas stove repair in Almaty, we check this circuit first.

Why the electric ignition keeps clicking and whether it's dangerous

Constant clicking after ignition is most often caused by a dirty ignition spark plug or moisture on the insulator—the spark keeps arcing to ground. The spark plug sits at the base of the burner, and grease, spilled liquid, or soot create a conductive path bypassing the spark gap. The second source is the ignition module itself: it generates pulses as long as the button remains on or its contact hasn't opened. While the stove clicks after ignition, the module is running idle and heating up—this isn't explosive, but it accelerates wear on the module, so it's best not to delay diagnostics. If the insulator is wet, simply drying the component is enough; if there's carbon buildup, remove the spark plug and clean its contact; if the clicking persists, check the button and the module itself, not just the spark gap at the burner.

How a technician distinguishes a thermocouple fault from an ignition fault

  • Thermocouple signal: the technician uses a tester to measure voltage at the heated junction and at the valve contact to see if the sensor maintains the circuit.
  • Ignition spark: the spark at each burner and the condition of the spark plug insulator are checked separately, not just the button click.
  • Symptom based on complaint: "doesn't ignite on the first try" usually points to ignition, while "goes out after releasing" points to flame retention—these are different components.
  • Check order: first the ignition circuit, then flame retention—this way the cause is identified accurately without replacing parts at random.

Gas smell and weak flame—what to do before the technician arrives

Gas smell and a yellow flame are two different signals. In the first case, the sequence of actions before the technician arrives is crucial; in the second, the cause is usually in the jets or flame spreaders.

What to do first if you smell gas

  • Turn off the valve: shut off the gas supply at the riser to the stove or at the cylinder.
  • Ventilate the kitchen: open windows and vents, but avoid creating drafts near other appliances.
  • Don't touch electrical switches: don't turn lights, exhaust fans, or sockets on or off—a spark can cause an explosion.
  • Leave the premises: exit the kitchen, get everyone out, and don't return until specialists arrive.
  • Call the emergency service: then call a technician who will check the connections for leaks with a leak detector or soap solution.

Why the flame is yellow or weak and when it's the jets

A yellow or weak flame is most often caused by clogged jets and burner caps — the mixture burns unevenly, so you don't get a blue flame. The jets set the size of the gas stream, and the cap spreads it across the burner: grease and carbon narrow the channel and change the mixture. Normal combustion is a steady blue flame with a stable cone. If only one burner has a yellow flame, the problem is in its jet and cap; if all burners do, a technician checks the gas pressure in the building and adjusts the flame. Our technicians arrive within 60 minutes in the city, diagnostics are free, and after cleaning they reset the flame and check every burner. A yellow flame leaves soot on pots and blackens the bottom — don't put off the call.

What you can clean yourself and when you need a technician

You can remove the grates and burner caps and wash off the grease yourself, but disassembling the burners, cleaning the jets and any work on the gas part should be done by a technician. The gas part of the stove requires experience and safety precautions: jets are removed with a special wrench without changing the calibrated hole, and after reassembly every connection is checked for leaks. Cleaning the burners and jets is part of maintenance, not a separate 'preventive' procedure: the technician combines it with diagnostics so the stove isn't taken apart twice. We recommend keeping the grates dry and not pouring detergent down to the base — that way carbon doesn't clog the channels. Never use matches or lighters if you smell gas — trying to 'check if it lights' is still the most common cause of a flash fire in the kitchen.

Common Hansa breakdowns and what the display code means

Hansa gas stoves show the same symptoms over and over — from 'won't ignite' to 'the knob is hard to turn'. We've put them in a table with the likely cause and what the technician does.

Table of symptoms and likely causes

SymptomLikely causeTechnician action
Goes out when you release the knobThermocouple, flame failure deviceChecks the signal, replaces the sensor
Doesn't ignite on the first tryElectric ignition, spark plugCleans the plug, checks ignition
Clicks after ignitionDirty plug, moistureDries the insulator, adjusts the gap
Weak flame, yellow colorClogged jets, burner capsCleans the jets, adjusts the flame
Knob is hard to turnBurner valvesDisassembles and services the valve
Burners produce sootClogged burner capsCleans the caps, checks draft

Does Hansa have error codes on the display

On Hansa gas stoves with a timer and control board, the display shows a fault code for a component, not a description of the breakdown — the exact meaning is checked by the technician against the model. On panels with electronics, a code appears when the timer, sensor or wiring fails, and the same symbol means different components on different series. Models without a control board have no codes: the only signs of a fault are how the flame and knobs behave. A display code doesn't replace diagnostics of the gas part: it points to a control component, and the cause is often in the wiring, so a part isn't replaced based on the code alone. If you need Hansa gas stove repair in Almaty, the technician will match the code to the model and check the component on site. Write down the display readings and what you did when they appeared — this information speeds up finding the faulty component.

Which breakdowns are fixed on site and which in the workshop

  • At home: thermocouple, flame failure device, electric ignition, burner jets and valves — a gas stove technician handles these on site.
  • At home: cleaning burner caps and adjusting the flame are also part of the visit.
  • At the service center: complex repairs of the control board, timer, or oven may require disassembling the body.
  • Decision: "home or service center" depends on the component, not the brand — the gas part is repaired on site to avoid moving a stove with a gas connection.
  • Visit: a Tech Service technician comes to your home or takes the stove to the service center if the component requires disassembling the body.

How a Hansa gas stove repair works at home

Repairing a gas stove at home is not just about replacing a part but also checking connections for leaks and doing a test run. Here's the step-by-step process in your kitchen and how to accept the result.

Steps from diagnostics to test run

  • Diagnostics of the gas part: the specialist checks ignition, thermocouple, and jets, and disassembles the component causing the symptom.
  • Approval of work: before starting, you learn which part we're replacing and why, and you confirm the scope.
  • Part replacement: a new thermocouple, valve, or jet is installed in place of the worn one, fitted on site.
  • Leak check: gas joints are soaped — bubbles would indicate a leak, which is fixed before reassembly.
  • Test run and flame adjustment: the burner holds the flame after you release the knob, and it's even and blue.
  • Acceptance: you check the ignition of each burner yourself and make sure there's no gas smell.

How to make sure the technician actually fixed the gas part

After the work, ask to see the leak check and test run: the burner should hold the flame after you release the knob, and it should stay even and blue. The specialist must demonstrate soaping the joints. Soaping the joints is done in front of you — there should be no bubbles at the connections. Separately, turn on the oven and make sure it doesn't go out and works without pops. Check the adjustment: the flame changes smoothly from minimum to maximum, without lifting or soot. If the specialist leaves without checking the connections for leaks, the job can't be considered complete — it's the only way to be sure gas isn't leaking at the joints. In my opinion, acceptance takes little time but removes the main risk: a hidden leak at the threads that you can't see.

Cleaning burners and jets — part of the service or a separate item

For us, cleaning burners and jets is included in the work when it's needed to fix the symptom — we don't push it separately "for prevention." Clogged jets cause the same symptom as a faulty part: weak flame, soot, slow ignition. Clogged burner caps lead to sooty burning and an uneven flame, so the technician first removes the burners, clears the holes, then checks the burning. A part replacement is offered only if the symptom remains after cleaning. In our experience, a yellow flame is often fixed by cleaning alone, without buying new components. We give a 1-year warranty on labor and parts. In my opinion, it's more honest to remove the clog first — it's cheaper for the owner and more accurately shows whether the part is really worn out.

Diagnostics, warranty, and payment

The terms of service are as important as the task itself — here's what's included in free diagnostics, what the warranty covers, and how payment works.

Scope of free diagnostics

Our diagnostics are free: the technician checks the gas part, finds the cause, and quotes the cost of work before starting. The check covers the entire ignition and gas supply chain — thermocouple, flame failure device, electric ignition, jets, and burners — not just the component the symptom points to. This way the technician rules out related faults that could make the stove behave the same: a weak sensor contact and a clogged jet produce a similar picture but are fixed differently. After the inspection, you get a clear cause of the breakdown and a list of parts to replace. Free diagnostics doesn't mean "free repair" — the technician gives the cost of work and parts after the check, and you decide whether to proceed.

What the 1-year warranty covers

We provide a 1-year warranty on labor and parts — if the symptom returns after the fix, the technician will come back under warranty. The term is the same for both the replaced part and the completed assembly: there's no situation where the thermocouple is covered but its installation isn't. During this period, repeat occurrences of the same issue are covered — failure to ignite, flame going out after releasing the knob, gas control malfunction. The specialist who performed the work knows the history of your stove and can pinpoint the cause faster on a return visit. The warranty covers both the part and the technician's work, so if the problem recurs, you won't have to prove whose fault it is — just describe the symptom.

How payment works and what methods we accept

  • Payment methods: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer, whichever is convenient for you.
  • Technician visit: we arrive within 60 minutes anywhere in the city, including remote areas.
  • Cost: the specialist gives you the price after free diagnostics, once the cause is known.
  • What the amount depends on: the price depends on the assembly and part, not on the district of the visit, so no one can give you an exact sum over the phone before inspection.

Why direct service matters for a gas stove

The gas part requires experience and safety compliance, so it's important who exactly comes — our own service technician or an intermediary who passes the order on.

How gas stove service differs from electric

In a gas stove, the gas part is added to the electrical part — burners, jets, thermocouple, gas control — and a mistake there is more dangerous than in the wiring. In an electric stove, a fault usually shows up in heating: the burner doesn't heat, the switch malfunctions, the breaker trips. In a gas stove, the electrical part is supplemented by the supply and combustion circuit, where any depressurization of a connection or incorrect jet adjustment leads to a leak or incomplete combustion with carbon monoxide formation. Therefore, after any work on the gas part, it's mandatory to check the tightness of connections and monitor the flame in all modes — from minimum to maximum. Electrical faults don't have such consequences: the worst there is a short circuit protected by a breaker. That's why a handyman who only fixes electrical parts is not suitable for a gas stove: work on the gas part requires experience and subsequent tightness testing.

Who will come and why it's a direct service provider

Our specialist with 4 to 20 years of experience comes to you — Tech Service is a direct service provider, not an aggregator, so the order is not passed to a third party. The visit takes up to 60 minutes, diagnostics are free, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. The specialist disassembles the stove, replaces the thermocouple or jet, and performs a test run on all burners — there's no dispatcher between you and the technician who subcontracts the work. In our practice, this is what decides the outcome: the one who took the stove apart remembers which nut they touched and how they checked the joint. A direct service provider is responsible for the result: the 1-year warranty on labor and parts is honored by the one who performed the work, not by an intermediary who might disappear.

Hansa gas stove repair explained simply

Breaking down the symptoms turns Hansa gas stove repair into a clear algorithm: identify the component, check for leaks, replace the part, test the burn. Below is a quick reference for the first signs of trouble.

  • Goes out after releasing the knob: look for the cause in the thermocouple and gas control, not the gas supply — the valve keeps the flame burning via the heated junction.
  • Constant clicking: a dirty ignition spark plug or moisture on the insulator causes a stray spark; the component needs cleaning and drying.
  • Yellow or weak flame: clogged jets and flame spreaders need cleaning and adjustment — soot on cookware confirms incomplete combustion.
  • Gas smell: shut off the valve, ventilate the room, call the emergency service and a technician; do not check for the leak yourself.
  • After gas component service: insist on a leak test of the connections and a test run of all burners, including the oven.

25brands

Besides Hansa, we repair other gas stove brands in Almaty

We work with Hansa gas stoves and other brands that have dedicated pages on the site.

We also repairWe also repairTECH SERVICE09

Besides Hansa gas stove repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Hansa gas stove repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp