experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will determine the exact cause after diagnostics.
clogged nozzle, weak spark, no gas
from4 000 ₸
thermostat tripped, clogged thermocouple
from5 500 ₸
clogged nozzle, low line pressure
from4 000 ₸
oxidized contacts, broken piezo element
from4 500 ₸
loose belt, broken motor
from4 000 ₸
sensor wear, stuck contacts
from8 000 ₸
clogged burner, faulty thermostat
from4 500 ₸
clogged burner, weak gas supply
from4 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4,500 ₸cost

BeforeAfter5 steps

From request to check — five steps. Diagnostics are free.
Choose a convenient visit interval so the stove is not left unattended.
The technician arrives anywhere in the city within 60 minutes after your request.
The technician works on-site at the stove, disassembles only the necessary unit, and does not require moving the stove out of the kitchen.
The technician checks the ignition of all burners, the tightness of connections with a leak detector, and monitors the flame.
The technician cleans up in the kitchen and returns the stove to its original position.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the symptom and stove model — the technician will clarify details and arrange a visit. Ask about payment procedure and timelines.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Лилия В.Order No. ZK-2026/952 · 21 April 2026
oursОбращаюсь не первый раз, поэтому есть что сказать. Пришлось самому напоминать про гарантийный талон. В общем, доволен.
Татьяна Б.Order No. ZK-2026/395 · 21 March 2026
oursПервый раз сюда, до этого чинился в другом месте. Было подозрение, что дело в плате, хотелось услышать второе мнение. Работали аккуратно, ничего не поцарапали. Оформили всё официально, с гарантией. Запчасть нашли без проблем. Отношение нормальное, без высокомерия. Приняли технику, выдали квитанцию. С чистой совестью советую.
Анна Т.Order No. TS-1456 · 11 May 2023
oursИскал сервис с гарантией, чтобы не переделывать. Было важно, чтобы сделали до выходных — гости, то-сё. Если что — обращусь снова.
Санжар О.Order No. 50465 · 21 March 2022
oursПозвонил, когда техника встала окончательно. Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Чуть дольше, чем обещали, но предупредили!!
Томирис Ж.Order No. TS-1911-231 · 22 June 2019
oursПриехал без записи, приняли. Если что — обращусь снова). Работали аккуратно, ничего не поцарапали.
Марина В.Order No. 39426 · 14 December 2017
oursНашёл по отзывам, решил попробовать. Никита М возился с этим дольше, чем планировал, но довёл до конца!!
Елена К.Order No. TS-1705-245 · 14 July 2017
oursБыла срочная поломка, нужен был мастер сегодня. Однозначно да. Не пришлось ничего доказывать и просить.
Молдир С.Order No. ZK-8906 · 26 May 2017
oursНашёл по отзывам, решил попробовать. Было подозрение, что дело в плате, хотелось услышать второе мнение. Мастер посмотрел, назвал причину, всё разложил по полочкам. Цена не изменилась ни на тенге. Работу сделали в тот же день. Приняли быстро, объяснили, что и как будет. Работали аккуратно, ничего не поцарапали. Всё объяснили простыми словами. Однозначно да.
Наталья С.Order No. ZK-2362 · 21 April 2017
oursИскал сервис с гарантией, чтобы не переделывать. Турарбек Кайрош принял, посмотрел и сразу сказал, что делать
Бекзат Т.Order No. 869191 · 13 February 2016
oursОбращаюсь не первый раз, поэтому есть что сказать. Рустем Т взялся за то, от чего другие отказались. Если что — обращусь снова
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost often, there's a spark, but it's not hitting the right spot: the spark plug is dirty, the gap is off, or the insulation is damp. Less commonly, it's weak gas pressure or a clogged jet. The technician will pinpoint the exact cause during free diagnostics.
You can remove the grates and burner caps and wash off the grease yourself—that's safe. But disassembling the burner itself, cleaning the jets, and adjusting the flame is best left to a technician; otherwise, it's easy to mess up the settings and damage parts.
A yellow flame and soot mean incomplete gas combustion, which releases carbon monoxide into the air. You shouldn't cook on such a burner: it's harmful to your health and indicates a clog or misadjusted air supply.
Normally, it shouldn't happen: the flame gets blown out due to a shifted burner cap, clogged holes, or weak gas pressure. It depends on the model, but a burner should hold the flame under any cookware, so it's worth having a technician look at the stove.
Yes, the thermocouple and gas valve are replaced as separate components; you don't replace the entire stove because of them. The technician selects the part for the specific Beko model after diagnostics and provides a 1-year warranty on labor and parts.
Ask which Beko components they work with and how they check the gas control and ignition on this specific model. Our technician comes as a direct contractor, not an intermediary, and before the repair, explains the cause of the breakdown and what will be done.
Tech Service repairs Beko gas stoves in Almaty: our technician comes to your home or the work is done at our service center. Diagnostics are free, we arrive within 60 minutes anywhere in the city, and there's a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
In Beko gas stoves, faults tend to cluster around ignition, flame retention, and fuel supply. Let's break down which symptom points to which component and what check the owner can do themselves.
Most often the culprit is the electric ignition: the ignition electrode is dirty or the gap is off, so the spark jumps in the wrong place, and the ignition module produces a weak discharge. The electrode sits right next to the burner cap, and a thin layer of grease or carbon deposits diverts the discharge to the side — you hear clicks but the fuel doesn't ignite. On Beko stoves with multiple burners, the ignition module serves all of them at once, so one dirty electrode can "pull" the discharge from neighboring ones too. The gap between the electrode and the burner body is model-specific and shouldn't be adjusted "by eye": too large gives a weak spark, too small causes constant arcing. If you hear clicks but there's no ignition, don't turn the knob repeatedly — fuel accumulates under the cap, and re-ignition causes a pop. If cleaning the electrode yourself didn't help, a technician performs Beko gas stove repair in Almaty at your home after free diagnostics.
The burner goes out when the thermocouple stops "sensing" the flame: it gets dirty, shifts, or fails, and the valve cuts off the supply. The thermocouple is a thin tube in the flame zone connected to the gas control: while the flame sensor is heated, the valve keeps the supply open, and after cooling it shuts it off within seconds. A shift of the thermocouple a couple of millimeters away from the flame already causes false triggering of the safety — the burner works steadily, then suddenly goes out. Carbon deposits on the sensor are enough to slow heating, and you have to hold the burner knob longer than usual. A large pot placed on the edge of the stove grate blocks air access — the flame lifts off the thermocouple, and the safety triggers even on a working stove.
For us, a yellow sooty flame most often means clogged jets and burner cap: fuel flows unevenly, and instead of a steady blue flame you get soot. The jets (nozzles) set the amount of fuel for each burner, and a clogged hole shifts the mixture toward excess fuel — hence yellow tips and soot on the bottom of the pot. The cap distributes the flame in a circle; when its slots are clogged with grease and crumbs, the flames become uneven, one side heats more than the other. We disassemble the burner, clean the jets, and check that the flame is blue and even around the whole circle again. Cleaning the burners doesn't always solve the problem — if the tips remain yellow after cleaning, the technician checks the air supply adjustment and the condition of the jets.
| Symptom | What we check | Component |
|---|---|---|
| Clicks but doesn't ignite | spark, electrode gap | electric ignition |
| Ignites intermittently | ignition module, electrode | electric ignition |
| Goes out while cooking | thermocouple, gas control | flame sensor |
| Yellow sooty flame | jets, burner cap | burner |
| Knob turns stiffly | valve movement, supply | gas valve |
A gas smell is a signal where the order of actions matters more than finding the cause. Let's break down the steps right away, why a working burner with a leak is dangerous, and how we prevent a repeat.
Yes, it's dangerous: a burning flame doesn't guarantee that the connections are sealed, and a leak can come through a worn valve or joint. The burner works fine — the flame is even and ignition works — so the owner sees no reason to worry. But the leak is in the supply line: the valve seal, a threaded joint, or the supply hose. Gas connections are checked for leaks by applying soapy water to the joints or with a leak detector, not by looking at the burner. Your sense of smell dulls within a few minutes, so "it smells less" doesn't mean "it stopped." This kind of smell usually points to the valve or a connection rather than the burner itself — the whole supply line needs checking, not just the ignition. A technician starts by applying soapy water to every joint along the line and only then takes the unit apart; otherwise, finding the cause drags on.
We provide a 1-year warranty on labor and parts, so if the smell comes back, the technician returns and checks the connections again. A repeat leak is usually not caused by the part that was replaced but by a nearby joint that was sealed on the first visit, or by a seal that settled after the first heating cycles. Our practice: when replacing a valve or hose, check every connection along the line with soapy water, not just the one we touched. Don't try to tighten the connection yourself — a seal that's been disturbed makes it harder to find the cause, and over-tightened threads on a brass valve can crack. If the smell returns, shut off the gas and ventilate again, and leave the check to a technician with a leak detector. In the city, a specialist arrives within 60 minutes, so a repeat inspection won't drag on for days.
A code on the display narrows the search but doesn't replace diagnostics: the same error on Beko stoves can come from different components. Let's go over typical codes and the order in which components are checked on site.
| What the code shows | What it points to | What the technician checks |
|---|---|---|
| Ignition failure | electric ignition, spark plug | spark, gap, ignition module |
| Flame failure | thermocouple, flame supervision | flame retention, sensor |
| Gas supply failure | valve, jets | valve movement, clogged jets |
| Oven failure | thermostat, hinges | heating, door closing |
Our diagnostics are free: a technician checks the electric ignition, burners, gas valve, and connections for leaks, then tells you the cause and the cost of the work. First, they remove the grate and burner cap, inspect the spark plug and gap, and test the ignition module — the spark should fire consistently on every burner. Next, they check the valve movement, the cleanliness of the jets, and how the thermocouple holds the flame after you release the knob. They test the connections and hose for leaks with a soap solution or a leak detector — this is a mandatory step before any verdict. For the oven, they assess heating and how tightly the door closes, and cross-check their findings with the control board logic using the display codes. You decide on the work after diagnostics — it doesn't start until you approve the scope and cost. In our experience, the hardest thing to find is an intermittent fault that only shows up on a hot stove, so the technician sometimes asks you to turn on the burners for a few minutes.
Our technicians have 4 to 20 years of experience, and during diagnostics they work with specific Beko components, not a generic list of symptoms. Such a person names the stove series and explains how the gas control is set up in it, where the thermocouple is located, and how the electric ignition of this line differs from others. We come as the direct contractor — your address is served by our own technician, not an intermediary, so they are personally responsible for the diagnosis. In my opinion, the best test is to ask them to explain why they suspect a particular component. Ask which part they check first and why — the answer shows whether they know the brand or are just following a template.
Some breakdowns are fixed on site, while others require disassembling the stove at the workshop. Let's break down which jobs we do at home, how the service process works, and what affects the wait for a part.
| Job | Where performed | What it affects |
|---|---|---|
| Cleaning burners and nozzles | at home | burners, jets |
| Replacing electric ignition | at home | spark plug, ignition module |
| Flame adjustment | at home | nozzles, burner cap |
| Replacing gas valve | at home or at the service center | valve, gas line |
| Disassembling the stove and complex repair | at the service center | body, stove components |
Our timeline depends on the specific part: if it needs to be ordered, the technician arranges the next visit with you. The longest waits are for rare components for a specific Beko stove series — gas valve, ignition module, electric ignition for a non-standard model. Moreover, for Beko gas stoves in Almaty, replacing the gas valve and electric ignition are typical jobs that the technician performs at home. Around the city, the technician arrives within 60 minutes, so a follow-up visit if needed doesn't stretch into days. Don't agree to a "universal" part instead of the original — on a gas component, it affects tightness and how the flame holds. The 1-year warranty covers both the work and the installed part.
Warranty and care are directly connected: some repeat calls come from clogs and improper use, not from the repair itself. Let's go over what our 1-year warranty covers and how to maintain the stove so it needs intervention less often.
Our 1-year warranty covers both labor and parts: if the unit fails again after repair, the technician comes back under warranty. Tech Service is the direct contractor, so the same technician who came to your call is responsible for the result—no passing you between subcontractors. The warranty covers both the work performed and the installed part: if the same unit fails again during this period, it's treated as a warranty case. An important condition is that the stove hasn't been tampered with after our repair. If the owner takes the body apart, removes the burners, or turns the adjustment screws, the lines of responsibility get blurred. So don't take the stove apart after repair, even just to "take a look": a phone call is enough, and the technician will come back.
Burners and flame spreaders should be cleaned as they get dirty, not by the calendar: soot and a yellow flame are the first signal that it's time. On a Beko gas stove, the burners and flame spreaders are removable, while the jets (nozzles) stay in the body and need careful cleaning with a thin needle or wire. Clogged jets cause a weak or yellow flame: the gas mixture changes proportion, and the burner starts to soot instead of burning evenly. Wash the removable parts without abrasives and dry them completely before reinstalling—moisture in the jets prevents even ignition. In my opinion, most "ignition failures" after wet cleaning are actually water residue in the channels, not a piezo failure, and that's what you should check first.
Regular cleaning of the burners and checking the valve reduce the risk of a small clog turning into a unit replacement. The technician removes clogs from the burners and jets and also checks the gas valve: a stiff movement or loose knob at an early stage is fixed with adjustment, not a part replacement. Cleaning and unclogging the burners and jets plus flame adjustment take less time than finding and installing a new unit—so it's better not to put off maintenance. If the stove starts to soot or go out, don't delay: at an early stage, cleaning and adjustment are often enough, rather than replacing parts. Moreover, a yellow flame on one burner while the others are even almost always points to a local clog, not wear of the whole system.
Gas stove repair comes down to pinpointing the unit and following the right sequence of steps for the fault. Below is a short summary to help you decide.
25brands
Our technicians work with gas stoves from various brands. Choose a brand to go to its page.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read












