Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are frequent symptoms and likely causes. The technician will pinpoint the exact cause during diagnostics.
thermostat, sensor, refrigerant leak
from6 000 ₸
clogged capillary tube, timer, defrost sensor
from5 500 ₸
clogged drain, misaligned tray, hose
from4 500 ₸
refrigerant leak, thermostat, compressor
from5 000 ₸
compressor, fan, cabinet vibration
from6 500 ₸
code points to a component: temperature, defrost
from5 500 ₸
defrost sensor, timer, heater
from5 500 ₸
gasket, door misalignment, worn hinges
from5 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 6 000 ₸cost

BeforeAfter5 steps

From request to performance check — five steps.
Describe the symptom and model — the technician will prepare for the visit.
The technician arrives prepared based on the described symptom and model.
The technician confirms the model, symptoms, and access to power and water.
The technician leaves documents and explains the warranty terms.
The technician checks operation after reassembly: test cycle and measurements.
We reply during working hours
Leave a request — the technician will arrive within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
Лариса О.Order No. AST-2503-174 · 5 February 2025
oursИскал, кто работает в субботу, у нас с женой график сложный. С этим и пришёл: намерзает лёд. Вернули — проверил, всё ок!!
Наталия С.Order No. 53082 · 25 January 2025
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Причина обращения — шумит. Дильмурат С всё сделал при мне, за пятнадцать минут. Нагрев в норме, посторонних звуков нет.
Борис В.Order No. 2502-4413 · 17 January 2025
oursЖалоба одна: шумит. Никита М сам позванил и сказал, что готово. Ни разу не пожалел.
Екатерина К.Order No. TSA-51912 · 4 November 2023
oursПроблема ровно одна: шумит. Дильмурат С отсоветовал дорогой ремонт, предложил простой. Проверил на всех режимах — держит)
Любовь Ю.Order No. AST-2210-389 · 11 May 2022
oursБыло важно успеть до конца недели, а то морозы обещали. Привёз на диагностику: холодильник. С чем обратился: намерзает лёд. Никита М отсоветовал дорогой ремонт, предложил простой. По деньгам вышло ровно, без сюрпризов. Перезвонили на следующий день, уточнили детали. Пришлось ставить: модуль. Ни разу не пожалел.
Альбина Ю.Order No. AST-2001-960 · 27 April 2020
oursЗаявку оставил через сайт вечером, утром перезвонили. Думал, попал на дорогой ремонт. Симптом как на ладони: шумит. В другом месте просили на треть больше. Полёт нормальный.
Юрий М.Order No. AS-9458 · 7 May 2018
oursИскал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Первое, что заметил: шумит. Никита М сам позванил и сказал, что готово. Созвонились, уточнили модель, срозу сказали по запчасти. По факту меняли: модуль. Tech-service посоветовали в домовом чате. Пользуюсь и вспоминаю добрым словом.
Инна Н.Order No. 1709-5286 · 30 October 2017
oursСимптом как на ладони: шумит. Дильмурат С пообещал и сделал, без напоминаний. Работает, даже лучше прежнего.
Инна Н.Order No. AS-5681 · 20 August 2016
oursБольше всего мешало: намерзает лёд. Дильмурат С объяснял без умных слов, за это спасибо. Выбрал techservice, потому что близко к работе. Сейчас пашет без нареканий.
experience11 yearsDishwasher repair technician
experience10 yearsSenior washing machine technician
experience11 yearsStove and oven repair technician
experience11 yearsFreezer repair technician
experience16 yearsWashing machine installation technician
experience8 yearsDishwasher technician
experience12 yearsWashing machine repair technician
experience10 yearsWashing machine board repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost Ariston breakdowns are fixed on-site by a technician: replacing relays, thermostats, sensors, door seals, and repairing No Frost. Only complex cases involving compressor replacement or soldering are taken to the service center if it's inconvenient to do on-site.
Ariston No Frost models often have faulty defrost sensors, heating elements, and fans, which causes ice buildup and loss of cooling. Less common are control board failures or clogged drains — diagnostics will pinpoint the exact cause.
Check that the door closes tightly, the seal is intact, the outlet works, and the temperature settings haven't been changed. Don't go further inside: without tools, it's easy to damage sensors and make the problem worse.
If your Ariston refrigerator runs non-stop and freezes too much, a faulty thermostat, temperature sensor, or refrigerant leak is likely. The technician will determine the exact cause after free diagnostics.
Refrigerant is not toxic in small amounts, but a leak stops the refrigerator from cooling and food spoils. The danger is not the gas itself but spoiled food and possible compressor damage from running without refrigerant.
The compressor can be replaced separately if the body and other components are intact. The technician selects a compatible compressor and recharges the system with refrigerant; the final decision depends on the model and condition of the refrigerator.
Tech Service repairs Hotpoint-Ariston refrigerators in Astana with its own technicians, each with 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and you get the price after inspection. We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies.
An Ariston refrigerator signals problems in different ways—lack of cold, a blinking panel, or noise. Let's break down what each symptom means and when you need a technician.
If the light is on but there's no cold, the refrigerator is getting power, and the cause is almost always in the cooling circuit or the component that controls it. The compressor may hum but not build pressure if a refrigerant leak has emptied the circuit—then the motor runs idle and the evaporator stays warm. The second common culprit is the thermostat: it doesn't close the circuit, and the compressor simply doesn't get the start command. The third possibility is a faulty control board that doesn't supply voltage to the motor. You can easily check whether it's ice buildup or a breakdown: unplug the appliance for a day and leave the doors open. After a full defrost, let the compartments run for a few hours—if the cold doesn't return, the issue isn't ice but the compressor, thermostat, or a refrigerant leak.
A blinking indicator on the Hotpoint-Ariston panel is a signal from the control board that one of the sensors is out of its operating range, not a standalone failure. The board reads the thermistors in the fridge and freezer compartments, compares them with the setpoint, and if there's a discrepancy, it enters emergency mode with blinking. If the motor doesn't turn off and food in the fridge compartment starts to freeze, the thermostat or temperature sensor is to blame: they've stopped sending the command to stop the compressor. The thermostat regulates the temperature in the compartments mechanically or electronically, and if it sticks in the 'on' position, it runs the unit without pauses. If the refrigerator won't turn off and overcools, first check the thermostat and temperature sensor—they're the ones that command the compressor to shut off.
Sharp clicks are most often made by the compressor relay when it tries to start, while a steady hum comes from the compressor itself or the No Frost fan. The compressor relay starts the motor by sending a pulse to the start winding; when the contacts burn, it clicks but doesn't turn the shaft, and the cycle repeats every few minutes. A metallic hum indicates worn motor bearings, while a hum with case vibration points to the No Frost fan, where the impeller is rubbing or the bushing lubrication has dried out. Crackling in the freezer during defrost is a normal sound of plastic expanding and is often mistaken for a breakdown. If the clicks repeat in cycles and the cold disappears, the relay is no longer starting the motor—don't delay diagnostics, as the compressor is running idle.
The Hotpoint-Ariston panel reports faults with blinking and codes. Below is how to read the signals and what each one means in practice.
A code on the Hotpoint-Ariston display is an alphanumeric label that the control board assigns to a specific sensor or component that has gone out of acceptable values. The board reads the resistance of the temperature sensor in the fridge and freezer compartments, the evaporator defrost sensor, and based on deviations, forms a label like F01–F07 or a series of indicator flashes on the panel. The number of flashes between pauses corresponds to the zone number, and continuous blinking of a single indicator more often points to a discrepancy between two sensors. On models without a display, the signal is given only by a lamp on the control panel, and it can't be decoded without measuring resistance with a multimeter. Write down the code and the flashing sequence before the technician arrives—this label speeds up on-site diagnostics compared to describing symptoms alone.
| Panel signal | What to check first | Component |
|---|---|---|
| Temperature indicator flashing | compartment temperature sensor | temperature sensor |
| Defrost light on | defrost sensor and heater | No Frost system |
| Fridge won't turn off | thermostat, temperature sensor | thermostat |
| Cooling is weak | refrigerant leak, fan | cooling circuit |
| Clicking on startup | compressor relay | compressor relay |
Ariston fridge breakdowns are best broken down by component — from the cooling circuit to the door mechanics. That way you can see what the technician actually checks and why the same frost buildup or a silent compressor can lead to different repairs.
With a refrigerant leak, the compressor runs nonstop but the compartments don't get cold, while a broken thermostat means the compressor either won't start or won't shut off on time. Refrigerant escapes through microcracks in the foamed-in circuit, at capillary tube solder joints, and near the filter drier — the motor hums without stopping and uneven frost appears on the evaporator. A clogged filter drier looks similar: pressure in the circuit drops and cooling disappears even though there's no actual leak. The thermostat fails differently — contacts burn, the sensor loses sensitivity, and the fridge either stays silent or freezes everything into a solid ice layer. You can't tell one from the other by eye — you need a leak detector and a pressure reading in the circuit, which is why home diagnostics start with the cooling circuit.
An Ariston fridge compressor is replaced if it won't start or runs without pressure, but the relay and control board are checked first. The start relay costs pennies compared to the motor, yet it's usually what keeps the motor from starting: a click, a brief hum — then silence. On the control board, traces and triacs responsible for compressor startup and defrost burn out, so the technician first tests the windings, checks resistance, and only then makes a call on the motor. When replacing the compressor, the old refrigerant is pumped out, the filter drier is replaced, and the circuit is recharged — otherwise the new component will fail quickly. Often a "dead" compressor actually won't start because of a relay or a board trace — replacing the start component is simpler than replacing the motor itself.
On Ariston fridges with No Frost, the defrost heater, timer, defrost sensor, and fan are checked, and in the door mechanics — the gasket and hinges. When the defrost heater or sensor stops working, the evaporator ices up, airflow weakens, and the freezer stops freezing even with a working compressor. The defrost timer gets stuck in one cycle, the No Frost fan hums or stops — and cold is distributed unevenly between compartments. In the door mechanics, the gasket wears out: the seal is no longer tight, warm air gets in, and frost builds up on the walls. The hinges sag, the door skews, and doesn't fit tightly along its full length. Frost in the freezer with the fan running is a clear sign of a defrost failure, while a loose door seal causes the same frost but for a different reason.
We start Ariston fridge repair in Astana with free diagnostics at your home. Here's the work order and what each stage includes.
Request a visit, we arrive within 60 minutes and provide free diagnostics — we come to your home within 60 minutes anywhere in the city and run free diagnostics to find the cause of the breakdown before any work. The technician inspects your Ariston refrigerator on site: listens to how the compressor starts, checks whether the compartments are cooling, examines the door seal and hinges. If the fault requires disassembling a unit, we discuss service work — some issues we fix right in your kitchen. During diagnostics, the technician checks the cooling circuit, electrics, and door mechanics — this rules out a false diagnosis and prevents replacing a working part. A practical tip for the owner: clear access to the back wall in advance and note how the appliance behaves when turned on — this speeds up the inspection. For you, this means you won't pay for disassembly "just in case": first we find the real cause, then we talk about repairs.
After diagnostics, the technician quotes the cost of work and parts, and only after approval starts the repair on site or takes the refrigerator to the service center. Approval comes before any replacements: you know in advance which part is being replaced and why. Some breakdowns are fixed on site — replacing the thermostat, compressor relay, start device, repairing a hinge or door seal. If soldering the circuit or working on the control board is needed, we discuss with you the most convenient way to do such work. The technician quotes the price after free diagnostics — before that, any sum would be a guess, not a calculation based on the actual breakdown. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer for companies, so you can pay in the way that suits you. If after approval it turns out another part is needed, the technician first explains the reason and only then proceeds with the replacement.
We check the result of the work together with you and provide a 1-year warranty on labor and parts. The check is done in your presence — the technician shows that the compartments are cooling and the compressor turns off on the thermostat's command rather than running non-stop. This shows that the unit has reached operating mode, not just started up after assembly. The warranty covers both the work performed and the parts installed — if the same fault appears within a year, we handle it under warranty. That's why we check all circuits, not just the replaced part. If after repair you notice that a compartment is cooling slower than usual, you can call us and describe how the appliance behaves — the technician will compare the symptoms with what was done during repair and advise whether another inspection is needed.
An Ariston refrigerator requires a technician who knows this brand, not just any generalist. Let's look at what to consider when choosing and which part of diagnostics you can do yourself.
Tech Service is a direct contractor: our own mobile refrigerator technician comes to you, not a subcontractor through an aggregator, so we are responsible for the work and warranty. Our technicians have 4 to 20 years of experience, arrival within the city takes 60 minutes, and diagnostics are free. The work performed and parts installed are covered by a 1-year warranty. An intermediary between you and the technician has no shared responsibility for the result — if the breakdown recurs, there is no one to claim against except the dispatcher. Ask directly who will come and who provides the warranty: when the same service gives the answer, responsibility for the result is not diluted between the platform and the contractor. We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician quotes the price after free diagnostics — before work starts, you understand what you are paying for.
In Astana, Ariston refrigerators are more often affected by power grid voltage fluctuations and by ice buildup on the door seal during sharp temperature swings outside. The control board and compressor relay take the brunt of power surges, and the door seal wears out faster due to the large temperature difference between the inside of the fridge and the apartment. After power outages, appliances may behave erratically. Voltage spikes damage the electronics and start relay, so if problems recur, the technician checks not only the unit itself but also the stability of the power supply. If the lights in your building flicker frequently, it's worth considering surge protection for your appliances. Ariston refrigerator repair in Astana starts with checking the power supply, not with taking the fridge apart.
You can check the power supply, the thermostat setting, and how tightly the door closes, but you shouldn't disassemble the cooling circuit or electronics without a technician. Make sure the plug is firmly in the socket and the thermostat knob isn't turned to minimum — sometimes that's enough to restore cooling. Check the door hinges: misalignment creates a gap that lets cold air escape, and ice builds up along the edge. Replacing the seal seems simple at first glance, but without proper installation the door won't hold the cold, and ice returns within a few days. Replacing the seal and restoring the door fit are jobs a technician performs while checking that the gap is even around the entire perimeter. Anything involving refrigerant, the compressor, or the board should be left to a technician who works with this brand.
Here are the key things to keep in mind as the owner of an appliance of this brand before calling a specialist or attempting a DIY inspection.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












