Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a vacuum cleaner

Vacuum Cleaner Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.

Repair prices

  • Diagnostics0 ₸
  • Filter replacementfrom1 500 ₸
  • Cord rewind mechanism repairfrom2 500 ₸
  • Motor brush replacementfrom2 500 ₸
  • Vacuum cleaner disassembly and cleaningfrom3 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common vacuum cleaner faults in Astana

If your vacuum cleaner is acting up, find your symptom in the table and check whether it requires you to stop using it immediately.

PricesPricesTECH SERVICE03

How much vacuum cleaner repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after vacuum cleaner repair in Astana

Cracked filter frame

1–2 hourstime

from 1 500 ₸cost

Problem
After the vacuum cleaner fell, the plastic frame of the exhaust filter cracked, the filter stopped fitting snugly, and the vacuum cleaner blew out fine dust.
What we did
The technician in the workshop removed the compartment grille, took out the filter with the cracked frame, and installed a new filter.
Result
The technician verified that the air at the outlet is clean, and the vacuum cleaner works again without dust emission.
I want the same
In the workshop on a mat stands a dark blue vacuum cleaner with a hose, the filter compartment is open; the technician's hands are inserting a new white pleated filter, next to it lie the old filter and a broken piece of its frameBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How vacuum cleaner repair works at your home in Astana

Five steps from request to approving the work on site.

  1. Requestsame day

    You describe the problem, the technician clarifies the details and arranges a visit.

  2. Arrivalwithin 60 minutes

    The technician arrives anywhere in the city within an hour after the request is confirmed.

  3. Diagnosticsfree

    The technician checks the model and serial number, notes the symptoms, and agrees on where to work.

  4. Approvalafter inspection

    You approve the scope of work and the price; only then does the technician start the repair.

  5. Work areaon site

    The technician needs clear access, a power outlet nearby, and the vacuum cleaner model details.

Leave a request

We reply during working hours

Book vacuum cleaner repair in Astana

Leave a request in any convenient way and choose a visit time — the technician will confirm it with you.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of vacuum cleaner repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Галина Ф.Order No. ZK-2026-639 · 17 October 2026

ours

С этим и пришёл: не всасывает. Дамир М разрулил всё быстро. Даже сосед заметил, что громче не стало)

Repair: vacuum cleaner repair in

Пётр Ч.Order No. ZK-2026-875 · 4 September 2026

ours

С левого берега ехать далеко, поэтому искал поближе к дому. Ходил вокруг него три дня, потом плюнул и повёз. Жалоба одна: не включается. Заплатил бы и больше, если честно. Крутит ровно, без рывков

Repair: vacuum cleaner repair in

Екатерина К.Order No. 2604-7014 · 4 April 2026

ours

Основная жалоба — не включается. Дамир М подобрал аналог дешевле, не навязывал оригинал. Нагрев в норме, посторонних звуков нет)

Repair: vacuum cleaner repair in

Мерей Р.Order No. AST-2512-571 · 25 April 2025

ours

Досым осы сервисті ұсынды, сеніммен келдім. Құрылғыны әкелдім, бірден қабылдады. Ризамын, рахмет.

Repair: vacuum cleaner repair in

Степан Я.Order No. 2407-6509 · 5 August 2024

ours

Зимой без техники никак, поэтому тянуть было нельзя. Жалоба одна: не всасывает. Стоит, работает, радует.

Repair: vacuum cleaner repair in

Валерий Д.Order No. TSA-98844 · 13 July 2024

ours

Живу в Есиле, искал сервис, чтобы не тащиться через весь город. С этим и пришёл: не всасывает. В техсервис попал случайно, возвращаться буду. Вернули — проверил, всё ок

Repair: vacuum cleaner repair in

Виолетта Д.Order No. TSA-61577 · 4 July 2024

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Проверил всё, что мог: не всасывает. Пользуюсь и вспоминаю добрым словом.

Repair: vacuum cleaner repair in

Шолпан Ш.Order No. ZK-2023-183 · 13 November 2023

ours

Құрылғыны әкелдім, бірден қабылдады. Достарыма айтамын. Жұмыс істеп тұр, шағым жоқ.

Repair: vacuum cleaner repair in

Виолетта Д.Order No. AS-9937 · 10 October 2023

ours

Друг из Сарыарки посоветовал это место. Симптом как на ладони: шумит. Сделали так, что и не придерёшься

Repair: vacuum cleaner repair in

Ботагоз Ж.Order No. AST-2312-705 · 23 September 2023

ours

Қабылдау тез болды, кезек жоқ. Жұмысты сол күні аяқтады. Ескі бөлшекті көрсетіп, қайтарып берді. Екі күннен кейін өзі қоңырау шалды. Барлығы ресми, чек берді. Жұмыс істеп тұр, шағым жоқ

Repair: vacuum cleaner repair in

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about vacuum cleaner repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What are the most common vacuum cleaner problems?

The motor and its brushes, the suction system, the power cord, and the cord rewind mechanism are the most frequent failures. On robot vacuums, the battery, brushes, and wheel drive are also common issues. A technician makes the exact diagnosis after free diagnostics.

Why does the vacuum cleaner overheat and shut off by itself?

That's the thermal protection kicking in: the filter or bag is clogged, the air duct is blocked, or the motor brushes are worn. Let the unit cool down, check the filter and bag, and if it keeps shutting off, it needs repair.

Why is it dangerous to keep using a vacuum cleaner if it sparks and smells like burning?

Sparks and a burning smell point to motor or wiring problems, and there's a risk of short circuit and fire. Unplug the unit and don't turn it on until a technician inspects it.

Why does the vacuum cleaner have weak suction after washing the water filter?

Most likely the filter was reassembled wet or not sealed tightly, so air is escaping. Dry it completely and check the seals. If suction doesn't return, it needs diagnostics.

The robot vacuum spins in place and doesn't clean—what's broken?

Usually it's the obstacle sensor or one wheel's drive. It depends on the model: sometimes a reboot helps, but more often the wheel motor needs replacing or the sensors need cleaning.

Do you repair robot vacuums with firmware and navigation, or only mechanical parts?

Yes, we handle both electronics and mechanics: the control board, sensors, battery, wheel and brush drives. First comes free diagnostics, then the technician agrees the scope of work with you.

Repair guideArticleTECH SERVICE07

Vacuum cleaner repair in Astana by Tech Service with a technician visit

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service repairs vacuum cleaners in Astana with its own technicians who have 4 to 20 years of experience. A technician comes to your home within 60 minutes anywhere in the city, or the repair is done at the service center. Diagnostics are free, and we provide a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.

Why your vacuum cleaner stopped working and what to check before repair

Most breakdowns show up as a specific symptom, and from that the technician can already tell which component is likely at fault before the visit. Let's go over the most common cases and what you can check yourself while the specialist is on the way.

The vacuum cleaner won't turn on or won't hold a charge

Most often we find the cause in the battery, the charging dock contacts, or the control board rather than the motor itself. Vacuum cleaner repair in Astana starts with measuring the voltage on the battery and inspecting the contact group: oxidized dock terminals produce exactly the same picture as a dead battery, and a crack on the control board shows up as intermittent power-on after the housing warms up. During free diagnostics, the technician goes through the chain "adapter — dock — battery — board" in order so as not to replace a working component or mistake a symptom for the cause. We also check the thermal sensor separately: if it fails, the unit shuts off after a couple of minutes of operation and looks like it's completely discharged. If the charging indicator doesn't respond when you place the vacuum on the dock, check the contacts and adapter — that will narrow the search even before diagnostics.

The vacuum cleaner hums but doesn't pick up dirt

Humming without suction usually points to a clog in the hose or filter, worn brushes, or loss of motor traction. On a turbo brush, a roller clogged with lint stops spinning, and the sound of the running motor remains but dirt isn't picked up; on cyclone models, loss of suction comes from a clogged HEPA filter that hasn't been washed for months. Worn graphite brushes in a commutator motor produce a characteristic crackling and a drop in speed — then the brushes need replacing, not the whole motor. A crack in the fan housing or a displaced gasket between the motor and the container also releases pressure in the air path, and the unit hums without doing any work. Before calling a technician, check the hose and container — a clogged air path gives exactly the same symptom and can be fixed without repair.

The robot spins in place, won't charge, or has poor suction after washing the aqua filter

On robots, we check the navigation sensors, side brushes, and dock contacts, and on aqua filters, we check that they're assembled correctly after washing. Dirty obstacle sensors make the robot turn in place, worn side brushes stop picking up dirt along the baseboards, and oxidized dock pads interrupt charging. In washing models with an aqua filter, suction drops if the section is assembled crookedly or the seal isn't seated in its groove. Disrupted calibration after wet cleaning also shows up as spinning in one spot — it's restored by reflashing and reconfiguring the map. Navigation modules with firmware require careful reinstallation, otherwise the room map gets thrown off again after one cleaning cycle. If suction disappears after washing the aqua filter, it's usually a section that wasn't dried or wasn't inserted all the way, not a motor failure.

Error codes and how free diagnostics work during vacuum cleaner repair

An error code on the display is a hint, not a verdict. Let's explain what the signal means, how the technician uses it along with a visual inspection, and what is checked during free diagnostics.

What the error code on the display means

A vacuum cleaner error code points to a specific component — motor, battery, sensor, or clog — and we decode it alongside a physical inspection. The same code on different models can have different causes: on upright vacuums, a flashing battery indicator often means battery cells are degrading, while on wet/dry models it may indicate a water supply blockage or a clog in the airway. The control board detects a sensor fault and displays it as an alphanumeric combination that can't be read without a wiring diagram. The technician cross-checks the signal with the device's behavior: does the motor hum, does the turbine spin, does it hold a charge. In our experience, decoding a code without an inspection leads to a false trail in about one out of three cases. Note the code and the conditions under which it appeared — this pair of data often saves diagnostic time and helps pinpoint the cause more accurately.

How free diagnostics work

  • Motor: we check shaft rotation, current draw, and housing heating during a brief power-on.
  • Battery: we measure voltage on the cells, check the charging controller, and test its ability to hold a load.
  • Control board: we inspect contacts and traces, and compare sensor readings against reference values.
  • Brushes and turbine: we assess bristle wear, bearing play, and hair wrapped around the shaft.
  • Filters and airway: we check for clogs in the hose, attachments, and cyclones, and inspect seal integrity.
  • Housing and mounts: we look for cracks, signs of overheating, and damage after a fall.

Do you repair robots with firmware and navigation

Yes, we service robot vacuums with navigation and firmware, not just the mechanical parts. The technician checks the lidar, camera, bumper and wheel contact sensors, battery and charging contacts, and verifies the app and firmware are working correctly. Some issues are resolved by reflashing or recalibrating sensors, while others require replacing the navigation module or wheel motor. A robot with a dirty lidar and knocked-off calibration builds an incorrect map and moves chaotically even though the electronics are fine. An obstacle sensor clogged with dust makes the device turn around in front of an empty space, and a worn battery cuts cleaning time in half. If the robot 'goes blind' or moves chaotically, the problem may be in the sensors rather than the software — that's why diagnostics start with checking the sensors, not reinstalling the app.

Repair at home or at the service center, and how soon the technician arrives

The format of work depends on the breakdown: some issues are fixed on-site, others require the service center. Below we explain how the scenario is determined, how long to wait for a specialist, and whether we take on wet/dry models.

Which breakdowns are fixed at home and which at the service center

BreakdownWhere we repairWhat we check
Clog in hose or pipeAt homeAirway patency, corrugated hose, connections
Worn brushes and attachmentsAt homeShaft, bearings, attachment mounting
Broken power cordAt homeWire integrity, plug, entry point
Burnt-out motorAt service centerWinding, commutator, impeller
Faulty control boardAt service centerTraces, contacts, power components
Tank leak on a wet/dry modelAt home or at service centerSeals, assembly, pump

How soon the technician arrives

We send our technician to your home, and arrival takes 60 minutes anywhere in the city. He comes with free diagnostics: he takes the unit apart, finds the cause, and only then tells you the format of work — on-site or at the service center. Our employee is not a middleman's courier: he sees the device through to the result, so you don't have to explain the symptom to someone else again. The service covers all districts, including new residential areas on the left bank, and the technician comes to you with tools for the described breakdown. To help him get there faster, tell us the symptom and the error code from the display when you call: this information lets us prepare the right tools and common parts for your model in advance. If the vacuum cleaner doesn't turn on at all, mention whether the indicator on the body lights up — this narrows down the likely causes before the visit.

Do you repair wet-dry vacuum cleaners and models with a water filter?

Yes, we service wet-dry vacuum cleaners and models with a water filter, including the pump and water supply system. These machines are more complex than regular ones: water passes through the pump, nozzles, and tank, and after use it requires rinsing and complete drying. The technician checks the pump for pressure, inspects the tank seals and supply hose connections, and tests the assembly under load. Some requests for wet-dry models are not about a broken unit but about improper use — overfilling with water, running without a filter, or storing with liquid left in the tank. That's why diagnostics start with checking the pump and assembly rather than replacing parts. If the cause is in how it's used, we'll show you how to assemble the machine so the leak doesn't happen again. Work and parts on these models come with a 1-year warranty.

Repair warranty and what to do if the vacuum cleaner breaks again

Warranty is the main argument when choosing a service provider, so we explain exactly what it covers and how it works if you come back.

What the 1-year warranty covers

We provide a 1-year warranty on labor and parts — these are two separate commitments, and both last a year. The first covers the quality of the work performed: correct assembly of the unit, motor connection, control board setup. The second applies to the installed parts — brush, bearing, filter, battery — and if a part fails early, it's replaced at no extra cost. Our technicians work with appliances from 4 to 20 years old, so they identify a faulty part during free diagnostics, not after assembly. Both commitments are recorded right after the work is done, and the client knows the service's responsibility limits in advance. The parts warranty matters no less than the labor warranty: if the unit breaks again, you don't pay for the part a second time.

What to do if the vacuum cleaner breaks again after service

If the vacuum cleaner breaks again after service, we restore it under warranty according to its terms. Call and describe how the appliance's behavior has changed: it won't turn on, loses power, hums louder than usual, or shows a code on the display. The technician will compare the symptoms with what was already fixed and determine whether the breakdown is related to the previous work or is a new cause. Then we'll arrange a visit — within the city the technician arrives in 60 minutes — and repeat diagnostics for free. It's best to start with specifics: when the failure appeared, whether it repeats constantly, whether the operating mode changed. When you come back, it's important to describe exactly how the current behavior differs from before — this helps distinguish a related breakdown from a new cause.

Why warranty matters more than a low price

A warranty on both labor and parts reduces the risk of paying twice, while cutting corners on the technician often leads to a second visit. A technician with no obligations just fixes the symptom—cleans the contacts, replaces a fuse—and a week later the same broken component needs a proper repair. A one-year parts warranty means that a bearing or battery that fails early is replaced at no extra cost, not blamed on wear and tear. For residents of the capital, it's worth comparing offers not by the starting price but by the scope of commitments after the work is done. Ask whether the warranty covers only labor or also parts—that changes the real value. A cheap one-time visit with no obligations ends up costing more in the long run than service with a one-year warranty on the component.

Direct provider or middleman: how to choose a service

Search results for vacuum cleaner repair are full of aggregators and listings, and for a resident of Astana it's important to know who will actually show up and who is responsible for the result. Let's look at how a direct service differs from a middleman.

How a direct provider differs from an aggregator

We are a direct provider with our own technicians, not an aggregator or middleman, so we take full responsibility for the work. With an aggregator, the order goes to a freelance contractor: today one specialist comes, tomorrow another one for the same appliance, and when a repeat breakdown happens you have to start from scratch explaining the machine's history. With us, the technician handles the vacuum cleaner from diagnostics to pickup, remembers which components have already been checked and what was replaced, and stands behind a 1-year warranty on labor and parts. The difference shows up on repeat visits: you don't have to retell previous requests or pay for the same check again. In our experience, this saves time for both the owner and the technician—the second visit starts not from zero but from an already known picture of the fault.

How to tell your own service from a middleman on the phone

  • Own technician: a direct service names a specific specialist, while a middleman forwards the order to a third party without names.
  • Warranty responsibility: a direct service stands behind the work itself, while a middleman refers you to an outside contractor.
  • Staff or contractor: ask directly whether the specialist is employed by the company or brought in on a one-off basis.
  • Vague answer: if they answer questions about the warranty evasively and in general terms, you're probably talking to a middleman.
  • Diagnostics procedure: a direct technician quotes the price after free diagnostics, not "roughly over the phone."
  • Address and intake: a direct service has a location where you can bring the appliance and make a warranty claim.

Technician experience and why it matters

Our technicians have 4 to 20 years of experience, and this directly affects how accurately they diagnose by symptom. An experienced specialist is less likely to replace components at random: they match the appliance's behavior to typical failures of specific series and check the likely cause first, not everything in a row. In practice, this reduces the number of repeat visits—the owner doesn't pay twice for the same fault, and the technician doesn't waste a trip replacing a working part. A novice often works by trial and error, and the real cause surfaces later, after unnecessary expenses. We arrive anywhere in the city within 60 minutes, so the specialist's time on site goes into checking, not driving, and diagnostics remain free.

Which vacuum cleaners we service and whether it's worth repairing an old one

Let's look at which categories of appliances we service and when restoration is justified versus when replacement makes more sense. Understanding this helps you avoid overpaying to bring devices back to life when their useful life is already exhausted.

Which categories of vacuum cleaners we service

CategoryCommon weak pointWhat we check
Robot vacuumsNavigation, charging baseSensors, lidar, base contacts
Upright vacuumsBrush, bin, powerRoller, mount, power circuit
Classic canister vacuumsMotor, cordWinding, cable, switch
Wet/dry vacuumsPump, water filterPump, seals, valves
Cordless vacuumsBattery, chargerCells, controller, connector

When repair makes sense and when it's easier to buy a new one

Repair makes sense when the failure affects a single component and the rest of the appliance still has life left, while replacement is smarter when several systems are worn at once. If the motor still pulls, the body is intact, and only the control board or battery is acting up, fixing that one part gets the vacuum working again. The opposite picture is when the battery cells are weak, the motor is noisy, and the housing is cracked—here each repair leads to the next, and restoring loses its point. A fault that sounds "expensive" often turns out to be simple—a clogged filter, a stretched belt, a corroded contact. So it's better to decide after diagnostics, not based on the symptom: it shows the real scope of work and lets you compare it with the remaining life of the appliance. In our practice, we more often repair vacuums with a single failed component—for example, replacing the battery in a cordless model whose motor and body are fine. We usually write off those where wear has affected both the power supply and the motor: then repair only postpones the next breakdown by a couple of months.

What to prepare before the technician arrives

  • The vacuum itself: assemble the appliance completely, including the bin and installed filters, so the technician sees it in working configuration.
  • Charging base: for robots, have the station and power adapter ready—without them, charging and contacts can't be checked.
  • Error code: note what the display shows and when it appears—on power-up, during cleaning, or when docking.
  • Symptom description: briefly state what happened and when it started—this narrows down the components to check.
  • Access to a power outlet: clear space near the appliance so it can be plugged in for free diagnostics.
  • Service history: if filters or brushes were replaced recently, mention it—so the technician doesn't check something that's already fine.

When vacuum cleaner repair is the best choice

Observations of the vacuum's behavior and the diagnostic results together form a clear action plan—from the cause of the breakdown to choosing who does the repair.

  • The symptom narrows the search: won't turn on, won't suction, or is noisy—each pattern rules out some causes before the case is even opened.
  • Write down the error code: the exact combination from the display speeds up finding the faulty component and saves diagnostic time.
  • Repair format is secondary: at home or at the service center—decided after inspection and depends on which component failed.
  • Warranty is a selection criterion: 1-year warranty on labor and parts protects against repeat breakdowns due to the technician's fault.
  • Direct service is accountable for the result: with an intermediary, responsibility is blurred between contractors; with our own technicians, it's personal.

60brands

Which vacuum cleaner brands we repair in Astana

Choose a brand to go to the page describing repair for that brand.

We also repairWe also repairTECH SERVICE08

Besides vacuum cleaner repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before vacuum cleaner repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp