Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a smart home system

Smart Home System Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics

Our own technicians4 to 20 years of experience

Nikita M.Daulet T.Azim K.Zhangeldy M.

Repair prices

  • Diagnostics0 ₸
  • Preventive maintenance and testingfrom3 500 ₸
  • Smart lock adjustmentfrom4 000 ₸
  • Overheating or liquid damage recoveryfrom5 000 ₸
  • Programming and setupfrom5 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common smart home system faults in Astana

Causes are listed from most common. The technician gives an exact diagnosis after diagnostics.

PricesPricesTECH SERVICE03

How much smart home system repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Preventive maintenance and testingexact price — after the free diagnostics

1–3 hours

from3 500 ₸

Smart lock adjustmentexact price — after the free diagnostics

1–2 hours

from4 000 ₸

Overheating or liquid damage recoveryparts not included

1–2 days

from5 000 ₸

Programming and setupexact price — after the free diagnostics

1–2 hours

from5 500 ₸

Power circuit repairparts not included

1–2 days

from5 500 ₸

TECH SERVICE mobile technician with a tool case

How smart home system repair works in Astana

Five steps from request to performance check. Diagnostics are free.

  1. Requestsame day

    Describe the symptom and provide the controller model. The technician will clarify details over the phone.

  2. Technician visitwithin 60 minutes

    The technician will arrange a visit time and access to the controller.

  3. Compatibilitybefore choosing

    The technician checks protocol compatibility and the controller model before selecting a part.

  4. Repairby appointment

    Replaces the module or reconfigures the scenario depending on the issue.

  5. Approvalafter replacement

    The technician agrees on the scope of scenario setup after module replacement and records the final list of work in the request.

Leave a request

We reply during working hours

Book smart home system repair in Astana

Describe the issue in the form, and the technician will arrange a convenient visit time with you. Ask the specialist what parts will be needed and how diagnostics are performed.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE04

Reviews of smart home system repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Фёдор Б.Order No. ZK-2026-265 · 9 August 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ходил вокруг него три дня, потом плюнул и повёз. Больше всего мешало: ошибка. Не пришлось стоять в очереди, хотя народу было. Работает, как будто и не ломалось.

Repair: smart home system repair in

Григорий И.Order No. AS-4436 · 2 July 2026

ours

Позвонил в четыре места, тут ответили по-человечески. С чем обратился: нет сигнала. Дома включил, всё на месте.

Repair: smart home system repair in

Жандос Л.Order No. AS-9475 · 31 May 2026

ours

Таңертең қоңырау шалдым, түске дейін апардым. Ескі бөлшекті көрсетіп, қайтарып берді. Кезекте аздап отырдым.

Repair: smart home system repair in

Каусар Ф.Order No. ZK-2026-972 · 16 April 2026

ours

Құрылғы ескі, бірақ жақсы қарайды екен. Түскі үзіліске қарамастан қабылдады. Ақауын тез анықтады, қажетсіз нәрсе ұсынбады. Бөлшек қоймада бар екен, күтпедік. Жұмысты сол күні аяқтады. Рахмет, ұсынамын.

Repair: smart home system repair in

Валентина Р.Order No. AS-8574 · 1 April 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Больше всего мешало: не открываеться. Вернули — проверил, всё ок

Repair: smart home system repair in

Лариса О.Order No. TSA-10961 · 10 January 2026

ours

Позвонил в четыре места, тут ответили по-человечески. Проблема ровно одна: остановился. Про тех сервис слышал на Сарыарке. Дома включил, всё на месте.

Repair: smart home system repair in

Акжол Э.Order No. 41339 · 16 December 2025

ours

Телефонмен кеңестім, кейін апардым. Рахмет, ұсынамын!!. Бәрі жақсы болды.

Repair: smart home system repair in

Степан Я.Order No. AS-8593 · 9 November 2025

ours

Заявку оставил через сайт вечером, утром перезвонили. Проверил всё, что мог: не поднимается. Функционирует, тьфу-тьфу.

Repair: smart home system repair in

Эвелина Ш.Order No. 2511-2539 · 25 September 2025

ours

Заявку оставил через сайт вечером, утром перезвонили. Основная жалоба — не держит заряд. Полёт нормальный)

Repair: smart home system repair in

Анастасия Т.Order No. 2510-3824 · 20 September 2025

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Основная жалоба — не поднимается. Вернули — проверил, всё ок)

Repair: smart home system repair in

Our technicians in Astana

01 / 07
Nikita M., PC and network repair engineerexperience7 years

Nikita M.

PC and network repair engineer

Daulet T., senior mobile computer technicianexperience11 years

Daulet T.

Senior mobile computer technician

Azim K., laptop repair technicianexperience10 years

Azim K.

Laptop repair technician

Zhangeldy M., motherboard repair technicianexperience9 years

Zhangeldy M.

Motherboard repair technician

Tursynbay A., printer repair technicianexperience16 years

Tursynbay A.

Printer repair technician

Nurkhan I., computer repair technicianexperience12 years

Nurkhan I.

Computer repair technician

Azamat Kh., all-in-one computer repair technicianexperience18 years

Azamat Kh.

All-in-one computer repair technician

Questions and answersQuestionsTECH SERVICE05

Questions about smart home system repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a smart home be repaired if it was installed by another company?

Yes, we take on systems installed by other contractors, even if the company itself no longer responds. A technician will determine what exactly failed and offer repair or reconfiguration.

The smart home hub dropped off the network and all devices are offline — is this a repair or reconfiguration?

Most often it's a communication or settings glitch, not a hardware failure, and it's fixed by reconfiguration. If the hub won't turn on or doesn't see devices after a reset, a repair is needed, depending on the model.

The leak sensor triggered, but the smart valve didn't shut off the water — what needs fixing?

First, check the sensor's connection to the controller and the command to the valve; often it's a scenario setting issue. If the valve doesn't respond to commands, the actuator or communication module is faulty, and then a repair is needed.

Can a smart plug be repaired, or is it easier to buy a new one?

Repair is possible if the board or contact is faulty, but for some models replacement is more cost-effective. After diagnostics, the technician will tell you what to do with your plug, depending on the model.

Why does the smart light turn on by itself at night, and what to do about it?

The cause is usually false triggers from the motion sensor, a corrupted scenario, or network interference. A smart home repair technician will check the sensor and settings and eliminate the source of the glitch.

What to do if the smart home app won't connect to Wi-Fi?

Check the router and restart the controller; often the problem is in the network or corrupted connection settings. If the app still doesn't see the system after that, diagnostics of the hub and communication module are needed.

Repair guideArticleTECH SERVICE06

Smart home repair in Astana by Tech Service with a technician visit

Nikita M., PC and network repair engineer

Author: Nikita M.,PC and network repair engineer

Published
Updated

Tech Service repairs smart homes in Astana: our technician arrives at your door within 60 minutes anywhere in the city or takes the equipment to the service center. Diagnostics are free, the technician gives you the price after diagnostics, and there's a 1-year warranty on labor and parts. We fix systems no matter who installed them.

Why a smart home stops working and what to check first

A smart home rarely fails completely—usually one link drops out: the hub, the data channel, or a sensor's power. What exactly failed determines whether you need a repair or just a reconfiguration.

Three levels where failures most often happen

A smart home failure almost always occurs at one of three levels—power and signal transmission, the component itself (sensor, valve, outlet), or the control link (hub, app, scenarios). The controller ties sensors and actuators into one system: a Wi-Fi or Zigbee module receives signals from sensors, and the mobile app shows their status. When the module level breaks, a whole group of devices drops off at once; when a battery dies, a single sensor goes silent. Actuators—smart valve, outlet—fail less often, but their failure is visible by the consequences: the command is sent but the action doesn't happen. The data transmission level is the quickest to pinpoint: if after rebooting the hub some devices come back and some stay offline, the problem isn't the whole system but specific components or the channel.

What to check before calling a technician

  • Sensor power: dead batteries are the most common reason a leak or motion sensor goes silent.
  • Hub reboot: turn the controller off and on, wait for the devices to reappear on the network.
  • Router and internet: make sure the network is up and the hub is actually connected to it.
  • App: update and log in again if the interface won't open or can't see the system.
  • Scenarios: check whether automations were manually disabled after the last power outage.

Why you can't just reboot the hub and call it done

We don't consider a reboot a fix: it masks the symptom but doesn't eliminate the cause, and the failure comes back later—often on a different device. The hub restarts in seconds, the channel recovers, scenarios run—but if a battery is running low, the sensor will go silent again in a few days. The real cause shows up in a pattern: if the same device drops off at the same spot in the apartment, it's about the data channel or power, not a "glitchy" app. Tech Service looks for that pattern in the event log and the behavior of neighboring components: that's how we see where the chain breaks. That's why on the first visit we check power and the channel on all related components, not just the failed one.

Catalog of common smart home failures

Below are the failures we get called about most often; for each, you can see which unit the technician checks and where the cause usually lies.

Leak sensor triggered but the smart valve didn't shut off the water

The sensor isn't always to blame in this pair: we check the whole chain—the signal from the sensor, the command to the valve, the valve's electric actuator, and the connection between them. First the technician checks whether the event from the leak sensor reaches the hub, then whether the smart valve receives the shut-off command and whether the valve actuator actually responds. The communication channel is checked separately: if the valve is far from the controller or behind a thick wall, the command may get lost. Often the sensor is fine, and the failure is in the actuator or in packet loss between the hub and the valve. If the sensor triggers and sends a signal but the valve stays silent, the problem is in the actuator or the valve's connection to the hub—and that's the link to fix, not the sensor.

Hub doesn't see devices or dropped off the network

When the hub loses devices, we first check the communication channel and the controller's power, then the firmware and compatibility of specific models. The Zigbee or Wi-Fi module connects the device to the controller, and that's where the connection most often breaks: weak signal, crowded band, a physical barrier like a load-bearing wall or a metal panel. Next, the technician checks the battery—a weak battery makes the device drop off the network without any obvious error on the screen. Firmware is checked last: an update doesn't always fix things and sometimes becomes the source of incompatibility with older models. Some 'dropped' devices come back after a battery replacement, not after reflashing the hub—so starting with batteries is cheaper and faster than starting with a system update.

False triggers and lights that turn on by themselves

  • Sensor sensitivity: too high a threshold picks up movement behind a wall and in the next room.
  • Scenario conflict: two automations trigger on the same event and turn the light on in turns.
  • Interference and placement: a sensor by a window or near running appliances picks up false signals.
  • Outdated firmware: some models malfunction without an update and send chaotic commands.
  • Low battery: before it dies, it sends chaotic signals that are easy to mistake for a breakdown.

Repair or reconfiguration—where the line is

Customers often can't tell whether they're paying for hardware repair or for setup. During free diagnostics, we separate these cases by how the device behaves: in the system and in an isolated test.

How to tell a component failure from a misconfiguration

During free diagnostics, we test the component separately from the system: if the device works in a test but not in a scenario, it's a configuration issue; if it doesn't respond in the test either, it's a replacement or repair. We take the leak sensor, hub, socket, and valve out of the shared automation one by one and see how each behaves on its own. We turn off scenarios completely so we don't confuse the controller's logic with the hardware's behavior. The check takes little time, but it immediately shows where the command is lost: at the device level, the communication channel, or the program. This test saves money: half of all 'smart home is broken' calls end with reconfiguring scenarios, not replacing equipment. If the device doesn't respond in the isolated test either, we check power and the communication channel, then move on to the hardware—so we can see exactly which part needs repair.

Table of symptoms and actions

SymptomWhat it usually isWhat we do
Device offline, others workdevice power or connectioncheck battery and channel
Hub doesn't see all devicescontroller or network failurediagnose hub and router
App won't openphone, network, or hubcheck one by one
Valve doesn't shut off watervalve actuator or connectiontest valve and sensor
Light turns on by itselfscenario or sensorreview automations

When reconfiguration doesn't help and repair is needed

If the failure returns after reconfiguration, we move on to hardware diagnostics: check power, connection, and the component itself. We test the controller and power supply separately from the communication channel—a voltage drop produces exactly the same signs as a network loss. A recurring failure after a power outage usually points to the controller or power supply, not to scenarios—restoring them only temporarily masks the cause. That's why after a power surge we check power first and only then deal with automations. If the component is fine but the command still doesn't get through, we check the firmware and the hub pairing. This order cuts out unnecessary replacements and leaves only the parts that actually failed.

Who to call and how smart home repair works

Smart homes are repaired either on-site or at the service center — the format depends on which component broke. Below is how we do it and who to look for.

The technician comes to your home or takes the equipment to the service center

We work in two formats: an on-site technician arrives at your home within 60 minutes anywhere in the city, and if repair at the service center is needed, we take the equipment there. The on-site specialist starts with free diagnostics: checks the hub's power, connection with sensors, condition of drives and valves, and response of scenarios in the app. Based on the results, they name the cause of the failure and the cost of work, and only after that we begin restoration. If the breakdown concerns the device itself — sensor board, faucet mechanism, lock — the equipment is taken to the service center, where it is disassembled and repaired separately from the system. We perform smart home repair in Astana both on-site and at the service center — the format is chosen based on the nature of the breakdown. Most smart home failures are resolved on the spot, because the cause lies in the 'device — hub — scenario' connection, and it is only visible in a working system.

Is a smart home technician an electrician or an IT specialist

A smart home technician is a specialist at the intersection: they understand both electrical parts (power, drives, valves) and digital parts (connection, hub, app, scenarios). Our technicians have been working with such systems for 4 to 20 years — enough to tell a burnt-out power supply from a misconfigured scenario by the symptom. An electrician without digital training will check the outlet and wiring but won't see why the faucet isn't receiving a command from the leak sensor. An IT specialist will set up the app but won't touch the valve or drive. Therefore, calling an electrician or an IT specialist separately often doesn't solve the problem: the failure may be at the junction of two areas, and only someone who checks both can see it.

Does the technician come outside the city and throughout the city

  • Arrival within 60 minutes: the technician comes to your home anywhere in the city; we clarify the service area when you contact us.
  • Direct contractor: our own service technician comes to you, not an aggregator or intermediary.
  • On-site diagnostics: free, performed before any work and before quoting the cost.
  • Repair at the service center: if equipment needs repair outside the home, we take it to the service center.
  • Payment: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer.
  • Warranty: 1-year warranty on labor and parts after repair.

Will you repair a system installed by another company

A smart home is often installed by one company, and when something breaks, the installer is no longer responsive. Below is what we do in such a situation and why the previous installer doesn't determine who to trust with restoring the system.

We work with systems installed by another company

We take on smart homes installed by another company: Tech Service is a direct contractor, and the work does not depend on who installed the equipment. Our technician comes to your home or takes the equipment to the service center, diagnoses the hub, sensors, and drives, and after free diagnostics names the cost of work. The scheme is typical: the previous installer assembled the system, set up the app, and left, and when a failure occurs, residents are left without support. Being tied to a specific installer does not make the equipment unserviceable — it is only important to get access to the hub and app. The only thing needed from the previous installer is this access (account, app, hub); if it's missing, the technician deals with it on-site and discusses the timeline and scope of work after inspection.

What to do if the equipment was installed long ago and the models are no longer sold

  • Repairability: the technician opens the unit and assesses whether it can be restored or has reached the end of its life.
  • Hub compatibility: we check whether the controller detects the old sensor or actuator and which protocol it uses.
  • Replacing a single component: if only one part is faulty, we replace it rather than the entire assembly.
  • Diagnostics before decision: we quote the cost of work after a free check so the replacement isn't unnecessary.
  • Warranty: we provide a 1-year warranty on labor and parts — this also applies to older models.
  • Access to controls: if the previous installer is gone, the technician restores access on site.
  • Technician experience: from 4 to 20 years working with various assembly schemes, including discontinued components.

Why being tied to an installer isn't a dead end

A smart home is a set of standard components (hub, sensors, actuators, app), and restoration is possible at any service that understands these components. The hub links sensors and actuators into a single network, and the app only transmits commands — so a failure is more often in a specific unit rather than in who installed it. Our technicians have from 4 to 20 years of experience, and over this time they have worked with various assembly schemes and protocols. The fear of being 'tied to an installer' is most often about access to the account and app, not the hardware itself — and this is resolved during diagnostics, which shows which unit has actually failed and which has simply lost connection with the controller.

What is repaired separately and what is replaced entirely

Not everything can be restored, and not everything requires a full replacement. For each type of device below, you can see in which cases repair is usually possible and in which it's easier to install a new component.

Sensors, valves, and sockets — what is repaired and what is replaced

DeviceMore often repairMore often replacementWe check
Leak sensorcontact, batterysensor failuresignal and connection to hub
Smart valvevalve actuatormechanism wearcommand and shutoff
Smart socketcontact, relaycontrol module failurevoltage and response
Hubconnection, settingsboard failurechannel and firmware
Motion sensorsensitivitysensor failurefalse triggers

Smart locks and video surveillance separately from the system

We consider locks and video surveillance both as part of a smart home and as standalone devices — diagnostics will show exactly where the failure is. We check a smart lock on two fronts: battery and latch actuator, and a camera by voltage, recording, and connection to the hub. When the lock opens manually but doesn't respond to a command, the issue is more likely in the controller or scenario, not the mechanics. If the camera records locally but disappears from the app, we look for a break in the hub's communication channel. If the lock or camera drops out only when connected to the system but works on its own, the cause is in the hub or scenarios, so restoration involves the controller rather than replacing the device. Our technician on site first removes the device from shared scenarios and tests it in isolation — this way the boundary of the failure is visible faster.

What to do if the breakdown is non-standard

When a fault doesn't look like a typical one, we still take it on: free diagnostics will show exactly where the chain breaks. On site, the technician checks the hub, the sensor power supply, and the logic of the scenarios separately, and then together. Non-standard faults most often turn out to be a combination of two causes — for example, a dead battery plus a corrupted scenario — and individually each one masks the other. Such cases take longer to resolve than typical ones precisely because there is one symptom but two causes. That's why we don't replace the first sensor we come across, but go through the system level by level. If the breakdown requires replacing the controller, the technician will say so after diagnostics, not at the start of the visit. This approach saves you from replacing working components.

Warranty, diagnostics, and repair cost

Before calling a technician, it's important to understand what you're paying for and what support you can count on. Below is how our diagnostics, pricing, and warranty work.

Free diagnostics and the cost after it

Diagnostics are free, and the technician gives you the cost once it's clear where the fault is. The specialist comes to your home and checks the entire chain: controller, sensors, actuators, and the connections between them. Often the breakdown hides somewhere other than where it shows up: a smart valve doesn't shut off the water, but the cause is in the leak sensor or the controller itself. On site, it's clear which unit needs reconfiguring, which needs replacing, and which can be repaired. This order protects you from blind work: first the cause is visible, then the scope, and the decision is yours. If after the check you decide not to do anything, you don't pay for it. The technician states the final amount before work begins, so you know what you're paying for.

1-year warranty on labor and parts

For smart home repairs, we give a 1-year warranty on labor and parts — this covers both the controller and individual devices. If after a while the scenario fails again or a device stops responding, you come back to us instead of looking for a new technician. A warranty on parts matters in a system like this: if a replaced module fails a month later, that's our responsibility, not a new breakdown at your expense. Most repeat calls are about controllers and smart valves — units where one failed element affects the whole system. That's why after replacement we check the connections and scenarios as a whole, not just the unit we replaced. So the warranty is backed by a real check, not just a piece of paper.

How payment works and what's included

  • Free diagnostics: the technician comes and finds the cause before any work.
  • Cost after diagnostics: the amount is given once the cause and scope are clear.
  • Payment methods: you can pay in the way that's convenient for you.
  • 1-year warranty: covers labor and parts.
  • Post-repair check: we test connections and scenarios so the fault doesn't come back.

Smart home system repair and what to keep in mind

A smart home system rarely breaks down entirely — more often one component fails or a scenario gets corrupted. Below are the main things to keep in mind before calling a technician.

  • The fault is localized by levels: power, individual component, hub — checks start with the simplest link.
  • Repair and reconfiguration are different things: diagnostics show where setup ends and part replacement begins.
  • Someone else's system is not a dead end: equipment installed by another company is serviced regardless of who installed it.
  • Warranty and transparent pricing: diagnostics are free, 1-year warranty on labor and parts, and the cost is given after the check.
  • Don't delay the call: a faulty valve or leak sensor can do more damage than it seems at first.

9brands

Which smart home system brands we repair in Astana

We source parts by device model. Ask the technician about protocol compatibility and part availability.

We also repairWe also repairTECH SERVICE07

Besides smart home system repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE08

Worth reading before smart home system repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp