Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Washing Machine Repair in Astana

A technician will arrive within 60 minutes anywhere in the city. 1-year warranty on labor and parts, free diagnostics.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Vladimir V.Adilkhan N.Temirlan B.Miras O.

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common washing machine faults in Astana

The symptom can help you guess which component has failed and what to ask the technician.

PricesPricesTECH SERVICE03

How much washing machine repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after washing machine repair in Astana

Contact loss in the module connector

1 visittime

from 7 000 ₸cost

Problem
The washing machine either did not respond to buttons or reset the program in the middle of a wash.
What we did
The technician removed the top cover, took out the control module, re-soldered the connector pins where the solder had cracked and contact was lost due to vibration, and put the module back in place.
Result
Checked program start and spin — the machine runs without failures, 1-year warranty on the work and on the parts.
I want the same
Removed control module on a stool: a green board in a gray tray with black relays and white connectors, a technician's hands in orange sleeves soldering the connector pins with a soldering ironBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How washing machine repair works at your home in Astana

Five steps from request to checking the machine after repair.

  1. Requestafter request

    The technician clarifies the symptom and model, and agrees on a visit time.

  2. Diagnosticson site

    The technician inspects the machine free of charge and asks which program triggered the symptom.

  3. Approvalafter checkup

    The technician explains the cause and cost, and checks the part number against the machine model.

  4. Repaironce approved

    Replaces or restores the component using a suitable part.

  5. Checkafter repair

    Runs a test program, checks filling, washing, draining, and spinning.

Leave a request

We reply during working hours

Book washing machine repair in Astana

Leave a request — a technician will arrive within 60 minutes anywhere in the city and run free diagnostics.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of washing machine repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Василий Е.Order No. ZK-2026-877 · 8 October 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ни с того ни с сего — ошибка на дисплее. После ремонта — как новое

Repair: washing machine repair in

Зоя М.Order No. AST-2611-737 · 16 September 2026

ours

Заявку оставил через сайт вечером, утром перезвонили. Жалоба одна: вибрация. Третий месяц — никаких проблем.

Repair: washing machine repair in

Любовь Ю.Order No. ZK-2026-929 · 21 June 2026

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Позвонил жене, говорит: не отжимает. Сначала думал, что нужен паспорт, но обошлось. Ни разу не пожалел.

Repair: washing machine repair in

Семён Ш.Order No. TSA-54682 · 19 June 2026

ours

С чем обратился: шумит при отжиме. Дильмурат С посмотрел и честно сказал: менять не надо. Вернули — проверил, всё ок.

Repair: washing machine repair in

Валерий Д.Order No. AS-9920 · 2 June 2026

ours

Основная жалоба — шумит при отжиме. Астанинский Tech-service — нормальный вариант. Вернули — проверил, всё ок

Repair: washing machine repair in

Альбина Ю.Order No. AS-5393 · 13 April 2026

ours

Позвонил в четыре места, тут ответили по-человечески. Проблема ровно одна: не отжимает. Рустем Т — мастер от бога, если можно так сказать. Ни разу не пожалел.

Repair: washing machine repair in

Яна Э.Order No. 2608-7081 · 13 March 2026

ours

Ораз отсоветовал дорогой ремонт, предложил простой. Диагностику провели при мне, ничего не унесли в подсобку. После ремонта — как новое.

Repair: washing machine repair in

Ульяна Ч.Order No. AS-5524 · 13 February 2026

ours

С левого берега ехать далеко, поэтому искал поближе к дому. Было ощущение, что попал на замену целиком. Основная жалоба — течёт. Ораз разрулил всё быстро. Смета — 14 500, чек дали. Нагрев в норме, посторонних звуков нет.

Repair: washing machine repair in

Ярослав С.Order No. AST-2508-434 · 8 December 2025

ours

Жалоба одна: не сушит. Ораз показал старую деталь, всё прозрачно. Пользуюсь и вспоминаю добрым словом.

Repair: washing machine repair in

Григорий И.Order No. TSA-76195 · 24 July 2025

ours

Расстроился сильнее, чем следовало. Проблема ровно одна: течёт. Тихо, ровно, без сюрпризов.

Repair: washing machine repair in

Our technicians in Astana

01 / 05
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about washing machine repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Is it worth repairing a washing machine or better to buy a new one?

If the body is intact and the issue is with the pump, heating element, or belt, repair is usually cheaper than buying new. When the drum or electronics are worn out, a new machine may be the smarter choice — the technician will advise after diagnostics.

Do you repair washing machines of all brands?

Yes, we service popular brands: Bosch, Samsung, LG, Indesit, Electrolux, and others. We source parts by part number or model code, so most household machines can be fixed.

Can a washing machine with a sealed drum be repaired?

With a sealed drum, the bearing isn't replaced separately; sometimes the entire drum assembly with the tub is installed. If such a replacement isn't practical, the technician will advise after diagnostics on what's more cost-effective in your case.

Why is water leaking from the bottom of the washing machine?

Most often it's the hoses, drain pump, or pipes; less commonly the door seal, in which case water appears at the front. The technician finds the exact cause during free diagnostics and fixes it on-site.

Is it the heating element or the sensor if the washing machine doesn't heat water?

This can only be determined during diagnostics: the cause may be the heating element or the temperature sensor. The technician will check both components and replace the faulty one; usually the heating element is replaced without removing the drum.

What to do if the washing machine won't drain water?

Unplug the machine and drain the water through the emergency hose behind the lower service panel, placing a cloth underneath. Then you need a technician: they will check for a clogged filter, kinked hose, or worn pump on-site.

Repair guideArticleTECH SERVICE07

Washing machine repair in Astana by Tech Service with a 60-minute callout

Vladimir V., senior washing machine technician

Author: Vladimir V.,Senior washing machine technician

Published
Updated

Tech Service repairs washing machines in Astana: our technician arrives at your home within 60 minutes or takes the machine to our service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and you can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies. The technician gives you the price after diagnostics.

What's broken and why you need washing machine repair

Most breakdowns come down to a few components: the filter, pump, valve, heating element, or drum mounts. Let's go over common symptoms, likely causes, and what you can safely do before the technician arrives.

The machine won't drain

Most often the culprit is a clogged drain filter, a kinked hose, or a worn drain pump. The filter is at the bottom front behind the service flap—coins, lint, and small objects clog it, and that debris and clogging are what usually cause the unit to fail. A multimeter won't show a jammed pump: we check whether the impeller spins freely. When the filter is clean, we check the hose for kinks and only then the pump. If you're looking for washing machine repair in Astana, it's important to know that some of these breakdowns can be fixed on-site in one visit. Before the technician arrives, unplug the machine and drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath; the water may be hot. Don't unscrew the filter while the machine is running or take the pump apart yourself—the rest of the water from the tub will end up on the floor.

The machine won't fill with water or heat

If water isn't filling, we check the tap, the inlet hose screen, and the inlet valve; if it's not heating, the heating element or temperature sensor. Rust and sand from the water supply clog the screen, the valve stops opening when the coil wears out, and scale on the heater speeds up its failure. On Bosch and Siemens, the heating element is at the front: we remove the front panel and don't need to reach the tub. For most brands, we replace the heating element without removing the tub, so a "cold wash" is usually fixed on-site in one visit. The code on the display depends on the model—the technician checks it against the table for your machine rather than guessing from memory. Before calling, check that the tap on the inlet hose is open: a closed valve gives exactly the same picture as a faulty valve.

Leaking from the bottom, not spinning, or vibrating heavily

Leaks from the bottom come from hoses, the pump, and connections, while the door seal leaks at the front; vibration and stopping during the spin cycle are more often due to an unbalanced load, drainage, the belt, or the motor. The drive belt stretches and slips, brushed motors wear out their brushes, and inverter motors like Bosch EcoSilence Drive and LG Direct Drive have no brushes at all. Stopping mid-cycle is most often related to drainage, imbalance, or the motor; the control board is one possible cause but not the main one. The drum bearing is only replaced on a split tub—on a sealed tub it can't be replaced separately, and that directly affects the repair decision. Before calling the technician, distribute the laundry evenly in the drum—that alone resolves some "spin cycle breakdowns."

Error codes on the display during washing machine repair

The code on the screen narrows down the cause, but its meaning depends on the model. The technician checks the combination against the table for your machine rather than interpreting it from memory.

Drain codes by brand

CodeBrand and generationWhat it indicates
E18 or F18 (d02)Bosch, SiemensDrain problem
5E (SE, E2)SamsungDrain problem
E20ElectroluxDrain problem
F05Indesit, HotpointDrain problem
F18Bosch and Siemens older seriesDrain problem

Bosch and Siemens codes by series

  • F16: door not closed — check that it fits tightly and that nothing is caught between the door and the body.
  • F17: water not filling within the allotted time — check the tap, filter screen, and inlet valve.
  • F18: drain problem — filter area, hose, and drain pump.
  • F19: no heating — heating element or temperature sensor.
  • F21: motor — belt, brushes on brushed motors, or the motor itself.
  • F23: water in the sump, Aquastop protection triggered — look for leaks in hoses and connections.

What the code means and what to do before the technician arrives

The code points to a component, not a specific part: 5E on Samsung and F05 on Indesit indicate a drain problem but don't distinguish between the filter and the pump. A multimeter won't show a jammed pump — the technician checks whether the impeller spins freely, so an accurate diagnosis is made on site. Before the specialist arrives, unplug the machine and drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath — the water may be hot. Our diagnostics are free, and the 1-year warranty covers both labor and parts. In Tech Service practice, Bosch and Siemens codes most often point to a clogged filter or debris in the pump impeller rather than an electronics failure.

How the repair is done

Some work is done on site, some requires taking the machine apart at the service center. Let's look at what is fixed where, how to choose the format, and when repair stops being worthwhile.

What is fixed on site

On site, technicians typically replace the heating element, drain pump, inlet valve, belt, and fix leaks from hoses and the door seal. A Tech Service technician arrives with tools and common parts for popular brands, so heating, water fill, and draining are usually restored in one visit. The drain pump is located at the bottom front behind the service flap, the inlet valve is on the back wall near the hose connection, and the belt is behind the rear panel. The door seal leaks at the front and can be replaced without removing the drum. On most brands, the heating element is removed through the front wall without removing the drum, so this replacement doesn't require bringing the machine to the service center. Before the visit, describe the symptom and the code on the display to the technician — they will use it to estimate which parts to bring.

When service center repair is needed

The machine is taken to the service center when the drum bearing needs replacement — this is the longest job, requiring removal of the drum and tub. Humming during spin and rusty streaks under the seal point to this component, not the motor. If the tub is split, the bearing is replaced separately; if the tub is sealed, the bearing is not replaced separately, so the technician first clarifies the design and then offers a work format. Our specialist comes to your home, performs diagnostics, and if the work requires disassembly, takes the machine to the service center — you don't need to transport it yourself. For precise part selection, the model number is needed: for Bosch, it's the E-Nr on the rating plate inside the door. Working on the tub at home is inconvenient due to the scope of work and space, so such cases are planned as in-shop repairs from the start.

Repair or new machine

The decision depends on the component: replacing the heating element, pump, or valve is usually done, while a bearing in a sealed tub and the motor in inverter models require a separate estimate. Repair is justified when one component has failed and the tub, electronics, and body are intact. Bearing replacement is the most labor-intensive job, and here it's worth comparing it with the remaining service life of other parts: if the drum is already corroded and the seal tears repeatedly, the investment doesn't pay off. On brushed motors, brush wear is fixable, but inverter models like Bosch EcoSilence Drive and LG Direct Drive have no brushes — the diagnostic logic is different, and the motor verdict is based on electronics, not graphite. The technician explains what the repair will achieve and when it's easier to buy a new machine — without pressuring you in their favor.

Free diagnostics

Our diagnostics are free, and that's not a formality: during diagnostics, the technician finds the cause of the breakdown and determines which component to fix and where — on site or at the service center.

What the technician checks on site

During the on-site visit, we check how the machine fills and drains water, whether the pump impeller spins freely, the condition of the heating element and temperature sensor, the drive belt, and the door seal. First, we remove the service cover at the bottom front, unscrew the drain filter, and look for coins, lint, and small objects: clogs and debris in the pump cause most drain failures. Then we use a multimeter to test the heating element and temperature sensor, and inspect the belt and door seal for leaks at the front of the door. A jammed pump can't be detected with a multimeter, so checking whether the impeller spins is more important than meter readings: if it doesn't turn by hand, the pump is replaced, not "treated" with measurements. The drain pump doesn't run during water fill—this sign immediately rules out unnecessary theories.

How the part is selected

The part is selected by part number or model code; for Bosch, by the E-Nr on the rating plate inside the door. We verify the markings to avoid installing a component from a similar series: Bosch's older Maxx, Logixx, Classixx lines and the current Serie 2, 4, 6, 8 look alike, but their parts differ. The model code shows which heating element, pump, or belt is in a specific machine—this eliminates guesswork. An exact code saves time: the technician immediately finds the right component instead of manually comparing several similar parts. It helps to photograph the E-Nr plate in advance—the photo speeds up selection, and the part arrives specifically for your machine.

Why diagnostics are free

Diagnostics are included in the service and not charged separately: the technician quotes the cost of work after diagnostics, once the cause is known. This order removes risk for the owner—they agree to the work already understanding which component is being replaced and why. We don't charge for the inspection itself or for figuring out the breakdown: payment covers only labor and parts, and the 1-year warranty applies to both. If after diagnostics you decide not to repair the machine, you still don't pay for the inspection. In my view, this is fairer than schemes that charge separately for the visit and finding the cause—the person sees the full picture before agreeing. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies, so you choose how to pay.

Warranty and service terms

Service terms matter as much as the work itself: they determine what a repeat visit will cost and who is responsible for the result. Let's go over the warranty, payment, and how the service works from the inside.

What the warranty covers

We provide a 1-year warranty on labor and parts—it covers both the replaced component and the service performed. If after replacing the drain pump the machine stops spinning again, the request is handled under the same warranty, not opened as a new one: the specialist checks the component against the previous request and fixes the cause under the same terms. Washing machine repair in Astana, with prices depending on the component and scope of work, is covered by the warranty just like the replaced part. The same applies to the heating element, belt, pump, and sensors—the replaced part and the labor to install it are covered for the entire term. A parts warranty means that if the same component fails again, it is handled under the same terms, not treated as a new request—so when you hand over the machine, keep the note about the replaced part: it helps find the service history faster.

Payment and service format

You can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies, and the specialist quotes the price after free diagnostics, once the cause is identified. The amount is not quoted before disassembling the machine—first they check the filter, hoses, pump, heating element, and sensors, compare the error code with the table for your model, and only then explain what is being replaced and what the work includes. This order removes the main question Almaty residents have when choosing a technician: you pay for a clear scope of work, not for guesses over the phone. Tech Service is a direct provider: our own specialist comes to your home, not an intermediary, so the person doing the work is responsible for it. Payment acceptance does not depend on whether the machine was repaired at home or in the shop—all methods are available, including cashless payment.

Technician experience

Our technicians have 4 to 20 years of experience and work with various brands and series, including older and current lines. For Bosch and Siemens, these are pairs of generations: Maxx, Logixx, and Classixx alongside Serie 2, 4, 6, and 8 — on the former, the heating element and pump are removed using the same procedure, while on the latter the layout is different, and you know in advance which panel to remove. Experience with different generations also helps interpret codes: on older series without a display, the signal is read from indicators rather than a screen, and the code value is checked against the table for the specific machine. In my opinion, it's this familiarity with series that saves time: you don't have to guess where the pump is — you go straight to the right component.

How to book a technician

Booking takes a few steps: describing the symptom, agreeing on a time, and the work itself at your home or in the service center. Below is how this process works and what to expect after you submit a request.

How to submit a request

Submit a request, describe the symptom and the error code if there is one — a technician will come to your home or arrange service at the center. For washing machines in Astana, we just need the model and the machine's behavior: not draining, not filling with water, not heating, leaking from the bottom, or stopping mid-cycle. State the brand and series — for Bosch and Siemens, that's a pair of older (Maxx, Logixx, Classixx) and current (Serie 2, 4, 6, 8) lines; for other brands, the exact name is enough. If a code is showing on the display, read it out: E18 or F18 indicates a drain problem, E17 or F17 means water isn't filling within the allotted time. It's best to give the error code and machine model right away: this helps the technician bring the right tools and check the code against the table for your series. If you're looking for affordable washing machine repair in Astana, a request with an accurate description of the fault helps the technician pick the right tools immediately and avoid unnecessary back-and-forth.

On-site visit within 60 minutes across the city

A technician arrives within 60 minutes anywhere in the city, so you don't need to transport the machine yourself if the problem can be fixed on-site. We come to your home with tools for the described symptom: a clogged filter and hoses, a worn belt, a failed pump or heating element are all handled on-site. Taking the request and driving to the address takes less time than transporting a machine weighing tens of kilograms across half of Astana yourself. And it's the technician who does the driving and lifting, not the owner. The speed of the visit doesn't replace diagnostics: the cause is still determined on-site, not from a phone description. At the same time, they first check whether the pump impeller spins freely, and only then draw conclusions about the pump.

Cost without numbers

The technician quotes the cost after free diagnostics, once the component and scope of work are known. People look for affordable service in ads with an average figure, but the final price depends on the specific component: replacing a heating element, working on the drain pump, and replacing a bearing when removing the tank and drum are jobs of different scope and labor intensity. That's why we quote the price after inspection, not before, and we state it before work begins. This approach lets you compare the service with buying a new machine for a specific component, rather than an average figure from an ad where one sum is listed next to a dozen different faults. In my opinion, this is fairer than an averaged price list: the owner sees what they're paying for before the machine is even taken apart.

Washing machine repair what matters most

Briefly, what determines the outcome of a repair: which component failed, how accurately the code is identified, and what tank design your machine has.

  • Common components: draining is most often caused by the filter and pump, heating by the heating element and temperature sensor, leaks from the bottom by hoses, and at the front by the door seal.
  • Error codes: a code narrows the search, but its meaning depends on the model and generation, so it's checked against the table for the specific machine.
  • Home or service center: some work is done on-site, while bearing replacement requires disassembly, especially if the tank is non-separable.
  • Repair or replace: the choice depends on the component and tank design, not on the age of the appliance or the appearance of the body.
  • Diagnostics and cost: inspection is free, and the cost of work is quoted after it, once the cause is known.

85brands

Which washing machine brands we repair in Astana

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides washing machine repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before washing machine repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp