Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a laptop

Laptop USB Port Replacement in Astana

The port doesn't recognize a flash drive, feels loose, or gets hot when you plug something in — a technician will check the port and replace it.

  • The port stops holding the cable, devices disconnect on their own, or charging works only every other time.
  • The technician opens the case, checks the contacts and the soldering of the port on the board.
  • The faulty port is replaced with a new one, and the port is tested with working devices.

Our own technicians4 to 20 years of experience

Azim K.Nikita M.Daulet T.Zhangeldy M.
ours5,06 127 reviews
order database

1 yearwarranty on labor and parts

60 minutestechnician visit anywhere in the city

freediagnostics

What the job includesIncludesTECH SERVICE02

What laptop USB port replacement includes in Astana

Replacing a port isn't just soldering a new part. The technician checks the port, opens the case, removes the old port from the board, installs a new one, and tests it with devices. The price is quoted after free diagnostics, once the port type and board condition are clear.

Signs of a faultSigns of a faultTECH SERVICE03

When you need laptop USB port replacement in Astana

5

Five typical signs point to a faulty USB port, from loss of contact to physical damage to the port housing.

  1. Flash drive not recognized

    The device is plugged in, but the laptop doesn't see it. The cause is often worn or bent contacts inside the port.

  2. Loose port

    The cable doesn't hold well and falls out. The port housing has become loose, and contact is lost when it moves.

  3. Works intermittently

    The port sees the device, then doesn't. This is a sign of oxidized contacts or a crack in the solder on the board.

  4. Port gets hot

    The area around the port heats up when something is plugged in. Heat indicates poor contact or damaged traces.

  5. Visible damage

    The housing is bent, the divider is broken, or there are signs of liquid. It's best not to use such a port until it's checked.

How to tell a faulty port from a cable or flash drive problem by the indicator behavior and the connection sound.

Describe the symptoms
Parts and materialsPartsTECH SERVICE04

Parts and materials for laptop USB port replacement in Astana

The port is matched by laptop model and the part number on the board. Original and compatible parts differ in fit and contact material.

Original

Port by part number

Matching
by laptop model and part number
Fit
matches the factory location on the board
Contacts
material and coating same as the factory part
Lifespan
rated for the factory number of connections

Compatible

Compatible port

Matching
by port type and mounting dimensions
Fit
may require adjustment on site
Contacts
simpler material than the factory part
Lifespan
depends on the batch and manufacturer
PricesPricesTECH SERVICE05

How much laptop USB port replacement costs in Astana

The table shows what goes into the cost of replacing a USB port on a laptop: the "from" price for labor without the part and the timeframe, with the final amount agreed with the technician before any repair work begins.

Cooler replacementparts not included

1–2 hours

from4 500 ₸

Dust cleaning with thermal paste replacementexact price — after the free diagnostics

1–2 hours

from5 000 ₸

USB port replacementparts not included

1–2 hours

from5 500 ₸

Windows installationexact price — after the free diagnostics

1–2 hours

from6 000 ₸

Touchpad replacementparts not included

1–2 hours

from6 000 ₸

Work before and afterBefore and afterTECH SERVICE06

Before and after laptop USB port replacement in Astana

USB port ripped out

1 visittime

from 5 500 ₸cost

Problem
The flash drive was bumped, the USB port broke and stopped working. The port housing on the board is bent.
What we did
The technician installed a new USB port, soldered the contacts and checked the connection.
Result
The port works, the connection is stable. 1-year warranty on labor and parts.
I want the same
Acer laptop: USB port torn out — after repairBeforeAfter
01 / 02
All repairs

We reply during working hours

Book laptop USB port replacement in Astana

Describe the symptoms and your laptop model, and have the cable and flash drive that the port used to work with ready. This will speed up the port check on site.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE07

Reviews of laptop USB port replacement in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Ангелина Я.Order No. ZK-2026-722 · 19 July 2026

ours

С левого берега ехать далеко, поэтому искал поближе к дому. Сначала списал на мороз, но нет: шумит вентилятор. Вернули — проверил, всё ок.

Repair: laptop repair in

Фёдор Б.Order No. ZK-2026-476 · 10 January 2026

ours

Было важно успеть до конца недели, а то морозы обещали. Была мысль починить самому, но руки не дошли. Причина обращения — шумит вентилятор. Вытащили и показали: материнская плата. Проверил на всех режимах — держит.

Repair: laptop repair in

Надежда Ц.Order No. AST-2504-381 · 22 April 2025

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. После скачка напряжения — перегрев под нагрузкой. Привезли на такси, приняли без вопросов. За такую работу 6 500 — адекватно. По факту меняли: видеочип. Пользуюсь и вспоминаю добрым словом.

Repair: laptop repair in

Аркадий Я.Order No. 22822 · 4 September 2024

ours

Друг из Сарыарки посоветовал это место. Нужен был ремонт ультрабука. Проблема ровно одна: шумит вентилятор. Сергей Архипов разрулил всё быстро. Проверил на всех режимах — держит.

Repair: laptop repair in

Людмила Щ.Order No. AS-1644 · 12 June 2023

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Проблема ровно одна: перегрев под нагрузкой. Тихо, ровно, без сюрпризов.

Repair: laptop repair in

Регина Ф.Order No. 2208-4060 · 3 October 2022

ours

Причина обращения — шумит вентилятор. Раис Мирзахметов разрулил всё быстро. Третий месяц — никаких проблем.

Repair: laptop repair in

Галина Ф.Order No. TSA-86606 · 30 June 2022

ours

Причина обращения — выгорела плата. Дмитрий Радионов отсоветовал дорогой ремонт, предложил простой. Сейчас пашет без нареканий.

Repair: laptop repair in

Аркадий Я.Order No. TSA-71462 · 9 June 2021

ours

Зимой без техники никак, поэтому тянуть было нельзя. Записался на ремонт игрового ноутбука. Жалоба одна: артефакты на экране. Мастер вышел, послушал, сразу забрал в работу. В другом месте просили на треть больше. Вышло из строя: система охлаждения. Сделали так, что и не придерёшься.

Repair: laptop repair in

Наталия С.Order No. AS-8340 · 15 August 2017

ours

Не люблю эти поездки по сервисам, но деваться некуда. Причина обращения — не включается. Обошлось заменой: кулер. Разъёмы на месте, ничего не люфтит.

Repair: laptop repair in

Екатерина К.Order No. 1602-1818 · 1 November 2016

ours

В Астане с сервисами беда, поэтому выбирал по отзывам. Записался на ремонт игрового ноутбука. С чем обратился: отвалился чип. Пришлось ставить: термопрокладки. 31 000, и гарантия в комплекте. Оплату взяли после ремонта, а не вперёд. Обращусь ещё. Разъёмы на месте, ничего не люфтит

Repair: laptop repair in
See all reviews

Our technicians in Astana

01 / 05
Azim K., laptop repair technicianexperience10 years

Azim K.

Laptop repair technician

Nikita M., PC and network repair engineerexperience7 years

Nikita M.

PC and network repair engineer

Daulet T., senior mobile computer technicianexperience11 years

Daulet T.

Senior mobile computer technician

Zhangeldy M., motherboard repair technicianexperience9 years

Zhangeldy M.

Motherboard repair technician

Tursynbay A., printer repair technicianexperience16 years

Tursynbay A.

Printer repair technician

Questions and answersQuestionsTECH SERVICE08

Questions about laptop USB port replacement in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How much does replacing a USB port on a laptop cost?

The technician gives you the exact price after free diagnostics: it depends on the laptop model and how complex the job is. Diagnostics are free, so you have nothing to lose if you decide not to go ahead with the repair.

What should I do before taking my laptop in for a USB port replacement?

Back up your important files if you can, and unplug the laptop from power and any peripherals. It helps to show the technician which port isn't working and when the problem started.

Where in Astana can I get my laptop looked at if the USB port has stopped working?

If the port isn't working, you can use an external USB hub or another working port for now. For a permanent fix, it's best to book a technician to replace the USB port at your home.

Can a USB port be repaired, or is it always replaced?

In most cases the port is replaced entirely: it's a sealed unit, and soldering individual contacts isn't reliable. If only the contacts are damaged and the housing is intact, the technician may suggest cleaning it, but the decision is made after diagnostics.

What should I do if liquid gets into a USB port?

Unplug the laptop from power right away and don't turn it on until a technician has looked at it. Don't try to dry it with a hairdryer or heat it up — that can make corrosion worse. During diagnostics the technician will assess whether the port needs replacing.

Can I upgrade a USB 2.0 port to USB 3.0 or Type-C on a laptop?

It depends on the model: sometimes it's possible if the motherboard has the right contacts and space. In most cases the technician will suggest fitting the same type of port or using an external hub.

Repair guideArticleTECH SERVICE09

USB port replacement on a laptop in Astana with a technician visit

Azim K., laptop repair technician

Author: Azim K.,Laptop repair technician

Published
Updated

Tech Service replaces USB ports on laptops in Astana: a technician arrives within 60 minutes anywhere in the city, diagnostics are free, and you get a 1-year warranty on labor and parts. We replace USB 2.0, USB 3.0, and Type-C ports, working directly with no middlemen. The technician gives you the price after diagnostics.

When you need a USB port replacement and when cleaning is enough

Not every faulty port needs replacing—some cases are solved by cleaning the contacts if the problem is oxidation or dust. But there are symptoms that mean the part should be replaced entirely: unstable connection and overheating.

Why a USB port on a laptop stops working

  • Worn contact pins: the metal of the spring contacts loses its elasticity when flash drives are plugged in frequently, and the connection drops.
  • Detachment from the board: the socket loosens in its mounting spot, the solder cracks, and data transfer stops.
  • USB controller failure: the chip on the motherboard handles power and data exchange; if it fails, none of the ports work.
  • Dirt and oxidation: dust and moisture settle on the contacts, so the drive is detected intermittently or not at all.
  • Testing with a drive: if a flash drive isn't recognized in one port but works in another, the cause is almost always the port itself—this is the first test before a technician visits.

Symptoms that mean the port needs full replacement

  • Broken off: the part wobbles in the case and doesn't hold the plug—the mounting on the board is damaged.
  • Doesn't hold the cable: the plug falls out or the connection drops at the slightest movement—pins are worn or deformed.
  • Drive detected intermittently: the device is recognized only at a certain angle—there's no reliable connection.
  • Signs of overheating: the plastic is darkened, contacts are burnt—such a component is not repaired.
  • Torn off with traces: the part is ripped out with a piece of the board—we restore the printed traces and install a new port.

When cleaning the contacts is enough

If the socket is intact but the connection is unstable, free diagnostics will show whether replacement is needed or cleaning the contacts and checking the traces is enough. USB port replacement on a laptop in Astana isn't always required: often the socket can be restored without soldering. Our technicians disassemble the socket, remove oxidation and dust, check the pins, and test the traces to the power controller. After this procedure, the port often holds the plug firmly again and detects the drive without issues. With USB Type-C charging problems, the cause is often not the socket but the power controller—so we check the whole circuit, not just the socket. This approach avoids unnecessary soldering when the part is still working. Diagnostics are free, and the technician gives you the price only after determining the exact cause.

How USB port replacement on a laptop works with a technician visit

USB port replacement involves soldering on the motherboard, but you can start with a technician visiting your home: they will diagnose the port and tell you whether they can replace it on the spot or take the laptop to the service center.

How the technician arrives and what they do on site

  • Arrival within 60 minutes: our specialist arrives within 60 minutes anywhere in the city, regardless of the district and without waiting in line.
  • Free diagnostics: on site, they check the contacts and board traces to see if soldering is needed or if cleaning solves the problem.
  • Work approval: after inspection, they give you the price and agree on the scope of work, then proceed only with your consent.
  • Soldering tools: the mobile technician brings them along, so simple port repairs can often be done right at your home.
  • Taking it to the service center: the laptop is taken in only if the board traces are damaged and soldering can't be done on site.

Step-by-step port replacement process

  • Diagnostics: the technician inspects the port, checks the contacts and traces, and determines whether the part needs to be replaced entirely or just cleaned.
  • Removal: the old component is desoldered from the board with a soldering station, and the pad is cleaned of solder residue.
  • Installing the new one: the part is soldered onto the motherboard, and the technician ensures proper fit and reliable contact.
  • Flash drive test: after soldering, a flash drive is connected and the traces are inspected — this final check confirms that the contact holds and data transfers properly.
  • Time confirmation: the technician gives the exact repair time after inspecting the board, since it depends on the condition of the mounting area.

If the connector is broken off along with a piece of the board

If the port is broken off along with a fragment of the board, we restore the traces and install a new one — this is more complex work than a standard repair, and the technician assesses it after inspection. A broken-off component tears away together with the printed traces, and sometimes with part of the fiberglass, so the conductive connections have to be restored first, and only then can a new port be soldered. The damage affects not only the component itself but also the adjacent power and data circuits that run to the chipset, so it's important to assess the extent before starting work. The longer you delay with a broken port, the higher the risk of shorting adjacent traces and damaging the chipset — so it's best not to put this off and to show it to a technician right away. In our practice, it's precisely the neglected cases with torn contacts that require the most painstaking restoration work.

Why a faulty port is dangerous and what to do if liquid gets in before replacing the USB connector in a laptop

A faulty USB port is more than an inconvenience: a shorted contact or liquid inside can damage the motherboard, and then the repair will cost noticeably more than replacing the connector.

What happens if you don't fix a shorted port

A shorted connector can damage the power controller and the chipset on the motherboard, and that already means restoring the entire electronics rather than replacing the connector. A short circuit occurs when the contacts inside the socket shift or oxidize and bridge adjacent traces that carry power. The damage then goes deeper: first the power controller responsible for voltage distribution suffers, then the chipset, and the device stops turning on at all. At that point, traces have to be restored rather than a part replaced. A short doesn't always show up immediately — the laptop may work but gradually overheat around the connector, and flash drives and cables start being detected intermittently. So it's better to show an unstable contact to a technician before other symptoms appear: overheating and power failures are easier to fix early on than the consequences of a burnt chipset.

What to do if liquid gets into the port

  • Turn off the laptop: don't check if the socket works and don't plug flash drives or cables into it before inspection.
  • Don't use a hair dryer: hot air drives moisture deeper and melts the plastic parts of the connector.
  • Don't charge the device: applying voltage to a wet connector speeds up contact oxidation.
  • Show it to a technician: we check the socket for oxidation and decide whether a new connector is needed or cleaning is enough.
  • Don't leave it for later: liquid causes oxidation even after drying, and oxides gradually worsen the contact — a wet connector should be shown to a technician rather than just dried out.

Warranty, diagnostics, and service terms

Before ordering, it's important to understand what the service includes and what the warranty covers — below we explain our terms for USB connector replacement.

What the 1-year warranty covers

  • Warranty: we provide a 1-year warranty on labor and parts — it covers both the port replacement itself and the installed part.
  • Work: soldering the contacts, mounting the port on the board, and checking the port during reassembly — all of this is covered.
  • Part: the port itself, which the technician installs in place of the faulty one.
  • Repeat visits: if the port stops working again due to our fault, we'll take care of it under the warranty.
  • Experience: our technicians have 4 to 20 years of experience, so soldering tiny contacts is done without damaging adjacent board traces.

Free diagnostics and payment

Diagnostics are free, and the technician quotes the cost of work after inspecting the port — you can pay with Kaspi QR, Kaspi Red, card, cash, or bank transfer. The technician arrives within 60 minutes anywhere in the city and checks the port, contacts, and the condition of the board around it on site. This inspection shows whether a replacement is needed at all or if the socket just needs cleaning — the technician will explain both options. The final price depends on the laptop model and port type, so it's only given after disassembly and inspection of the mounting spot. You don't pay for the inspection itself, even if you decide to decline the repair — the decision is yours. Diagnostics are free whether or not you order the replacement, and the technician's trip across the city adds nothing to the bill.

Port upgrades, alternatives, and payment

Sometimes owners ask whether an old port can be replaced with a more modern one or if an external hub is enough — we cover both options and what makes up the final cost of work.

Can USB 2.0 be replaced with USB 3.0 or Type-C

Port typeWhat it offersWhen replacement is possible
USB 2.0Basic peripheral connectionStandard replacement due to wear
USB 3.0Higher speed, blue colorIf the board controller supports it
USB Type-CReversible connection, compact sizeIf supported by the board

Port replacement or external hub

An external USB hub is a workaround: it adds ports but doesn't fix the root cause, and if the port is shorted, the hub won't protect the board. A hub helps when there physically aren't enough ports for a mouse, flash drive, and external drive at the same time. But with a loose or corroded port, it only masks the problem: the unstable contact remains, power goes through damaged contacts, and the risk of shorting and controller failure doesn't go away. Repair fixes the cause itself, while a hub only expands the number of available ports. In our experience, installing a new port costs less than repairing a burnt board later after a short through such an adapter. A hub makes sense when the ports are intact and there just aren't enough of them; if there's play, crackling contact, or periodic disconnections, the device needs repair, not a workaround.

What affects the cost of USB port replacement on a laptop

  • Port type: USB 2.0, USB 3.0, and Type-C differ in design and number of contacts, which affects soldering complexity.
  • Board condition: oxidation, liquid damage traces, or damaged traces complicate the work and require circuit restoration.
  • Access difficulty: in some models the port is on a separate board, in others on the main board, which has to be partially disassembled.
  • Type of damage: a port broken off along with traces takes longer to fix than a standard one, so the final price is calculated after inspection.

Key points on laptop USB port replacement

Here are the key things to keep in mind before you come in: when the port really needs replacing, why a delayed response is risky, and what options you have.

  • Broken or loose connector: mechanical damage to the housing and contacts can't be fixed by bending them back — the part is replaced entirely with soldering on the motherboard.
  • Unstable contact: if the device only charges with the plug in a certain position, the cause is worn sockets, and cleaning only gives a temporary effect.
  • Liquid damage and short circuit: if liquid gets in or there are signs of a short, don't wait — not only the port but also adjacent circuits on the board can be affected.
  • Upgrade to USB 3.0 or Type-C: only possible if the board itself supports it, otherwise it's still a repair, not an upgrade.
  • External USB hub: works around the problem but doesn't fix the cause — the working port will continue to degrade over time.
Other servicesOther servicesTECH SERVICE10

Other services besides laptop USB port replacement in Astana

If you ask, the technician will check other parts during the same visit.

BlogBlogTECH SERVICE11

Worth reading before laptop USB port replacement in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp